spindle used for sale

Control Fanuc 18iTB Main spindle passage 42 mm 6 axes Front horizontal slide designed as cross slide (X1/Z1) Z2 turret slide including: 6-fold turret, IKZ, turret can be swivelled on both sides Rear horizontal slide x2 Two vertical slides X3 and X4 10 tool positions available Conveyor Bar Feeder SAMECA

TF170E Table milling machine with sliding table 1m with transverse stop

Carriage (LxW) 1000 x 240mm Working length of spindle 100mm Milling spindle diameter 30mm Spindle inclination +5 - -45° Spindle speed 1800 / 3000 / 6000 / 9000 Working height 900mm Suction nozzle diameter: 38/100 Dimensions (LxWxH) 1000 x 850 x 1200mm Motor 2.8KW 400V Weight 218kg

ELB Perfect BD 10 750 PLC, Year of construction 2008 Control Siemens STC Grinding area 1000 x 750 mm Grinding wheel 400 x 100 mm Grinding spindle 10 KW Electro Perm Magnetic Clamping Plate 1000 x 750 mm Automatic straight-dressing device with compensation Coolant system with paper belt filter Machine is immediately ready for use CE compliant Installation / on-site training included

Blum Minipress hinge drilling machine Number of drills 5 Fastening drill bits with quick-release fasteners Motor power: 0.75kw Pneumatic clamp Stroke of pneumatic power pack Maximum workpiece thickness 40mm

Stockpresse / Spindle Press Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

1-Spindel-Papierbohrmaschine - 1-head spindle paper drilling Nagel Citiborma 150 Serial-No. 7404 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

turning diameter over bed: - mm turning diameter over slide rest: - mm turning length: - mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Spindelpresse - Spindle Press Krause Press area max. 250 x 280mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: Very good condition

Double Swivel Head Fast Runner SK40 for the Deckel FP Milling Machine without Motor However, the motor of the normal high-speed engine should fit just as well. Although the complete head probably has 70kg at the end, it probably even fits from FP1 upwards to FP4 Very good used condition, either never used, or only a few times. Except for slight traces of storage, no signs of wear to be seen. The spindle rotates cleanly and easily. However, the (drilling) stroke is a bit heavy, probably has to be adjusted. Pickup. However, a delivery can be arranged in advance, can... You will receive an invoice in paper form. Differential taxation according to sec. 25a of the German VAT Act. Therefore, no VAT is shown on the invoice.

1-Head paper drilling Nagel Citiborma Year - Serial-No. S129 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

turning diameter over bed: 930 mm turning diameter over slide rest: 630 mm turning length: 8000 mm speed: 800 U/min spindle passage: 105 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1-Spindel-Papierbohrmaschine - 1-head spindle paper drilling Foellmer Baujahr / Year 1986- Serial-No. 104 4 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

turning diameter over bed: 1000 mm turning diameter over slide rest: 640 mm turning length: 6300 mm turning dia. in gap: 1250 mm spindle diameter: 50 mm speed: 6-925 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

4-Spindel-Papierbohrmaschine - 4-head spindle paper drilling Josef Foellmer IRAM 200 Year ca. 1984 - Serial-No. 106 Drilling area 3 - 10 mm Drilling distance variabel 36 - 430 mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

2-Spindel-Papierbohrmaschine - 2-head spindle paper drilling Nagel Citoborma 280b Year 1998 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

turning diameter over bed: 1150 mm turning diameter over slide rest: 800 mm turning length: 6300 mm spindle diameter: 100 mm speed: 4-800 (x24) U/min turning dia. in gap: 1500 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1-Spindel-Papierbohrmaschine / 1-head spindle paper drilling LIHIT MC 1015 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Spindle diameter Ø 16 mm length: 325 mm square: 10 mm Dimensions: 450 x 35 x 35 mm

2-Spindel-Papierbohrmaschine - 2-head spindle paper drilling Nagel Citiborma 280B Baujahr / Year 2001 - Serial-No. 01052175 Standgerät / standing device Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Spindle, Machine Spare Part EX-CELL-O GmbH Type 65.607.5. Serial No.: G 005522 Speed: max 320 rpm Shaft diameter: Ø 50 mm New ! Dimensions: 525 x 155 x 185 mm

Spindelpresse - Spindle Press Dietz Listing SP-S Pressfläche / Pressing Size max. 450 x 550mm Gereinigt und neu Lackiert / Cleaned and new painted Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Spindle, machine spare part PAGUS G 150554 20113090 LOC - Q2B Shaft diameter: Ø 60 mm Flange diameter: Ø 160 mm New ! Dimensions: 540 x 160 mm

Spindelpresse - Spindle Press Krause SP-S Pressfläche / Pressing Size max. 500 x 600mm Gereinigt und neu Lackiert / Cleaned and new painted Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Spindle, machine spare part PAGUS G 152378 shaft diameter: Ø 50 mm Outer diameter: Ø 125 mm New ! Dimensions: 575 x 125 x 125 mm

Spindelpresse - Spindle Press Krause SP-S Pressfläche / Pressing Size max. 500 x 600mm Gereinigt und neu Lackiert / Cleaned and new painted Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Spindle, machine spare part EX-CELL-O GmbH Type 85.515.5. Serial No.: G 005229 Speed: max 1600 rpm Shaft diameter: Ø 60 mm New ! Dimensions: 560 x 340 x 270 mm

2-Spindel-Papierbohrmaschine / 2-head spindle paper drilling Hang 136D Serial-No. 71789 Seitenanschlag Side stop for fine adjustment Tiefenanschlag / Depth stops for fine adjustment Stapelhöhe / Stacking height max. 50mm Bohrdurchmesser / Drill diameter 2 – 14 mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Spindelpresse / Spindle Press Tränklein SP Serial-No. 209 Pressfläche / Press area max. 300 x 400mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Grinding spindle DKF 2 . 7 - 4 / 1 ( 2.7-4/1 ) n max: 16500 rpm Ø 70 mm Tool holder: Ø 25 x 30 mm / Ø 13 x 20 mm Dimensions: 335 x 80 x 80 mm

Spindelpresse - Spindle Press Krause SP Pressfläche / Pressing Size max. 550 x 750mm Gereinigt und neu Lackiert / Cleaned and new painted Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Grinding spindle DKF 3.8 - 7 / 1 ( 3.8-7/1 ) TGL 4870 ( TGL4870 ) n max: 14000 rpm Ø 80 mm Dimensions: 550 x 80 x 80 mm M15 x 1.0 left-hand thread

turning diameter over bed: 400 mm turning diameter over slide rest: - mm turning length: 1000 mm total power requirement: 9 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 2,511,6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grinding spindle DKF 3.4 - 3 / 2 ( 3.4-3/2 ) TGL 4870 ( TGL4870 ) n max: 32000 rpm Ø 40 mm Dimensions: 285 x 40 x 40 mm

Connected load 380V 6.8kW 12A with sliding table 1100 mm Table size 1100 x 900 mm Height adjustment with hand crank Integral stop jaws Stops individually adjustable via Siko counter Aigner milling cutter protection device Suction 1x120 1x150 mm Speeds: 2900/4400/6000/8000/10000 rpm

Grinding spindle FEMINA 3.4 - 3 / 1 ( 3.4-3/1 ) TGL 4870 ( TGL4870 ) n max: 32000 rpm Ø 40 mm Dimensions: 260 x 40 x 40 mm

Spindle with centering tip, clamping device PAGUS clamping range: 145 mm base plate 215 x 100 mm shaft diameter: Ø 40 mm Handwheel diameter: Ø 250 mm Dimensions: 600 x 250 x 250 mm

Grinding spindle DKF 3.8 - 8/2 ( 3.8-8/2 ) TGL 4870 ( TGL4870 ) n max: 14000 rpm Ø 80 mm Dimensions: 635 x 80 x 80 mm

Clamping table with spindle PAGUS Table length: 375 mm Table width: 180 mm Table height: 400 mm Table x-travel: 140 mm Groove width: 15 mm Groove depth: 25 mmg used, tested ! Dimensions: 475 x 375 x 270 mm

Grinding spindle DKF 5.12-7/21 TGL 4870 ( TGL4870 ) n max: 4000 rpm Ø 125 mm Dimensions: 590 x 125 x 125 mm

Hand spindle press Compressive force: presumably approx. 6000 kg Table surface: 390 x 250 mm Spindle diameter: Ø 40 mm Plunger stroke max: 25 mm Distance table-ram: 55 mm projection: 100 mm Dimensions: 440 x 390 x 510 mm

Grinding spindle DKF 2.10-7-1 TGL 4870 ( TGL4870 ) n max: 10000 rpm Ø 100 mm Dimensions: 520 x 100 x 100 mm

Lifting Spindle Drive, Electric Cylinder FRAMO Type Mini 2 (8-2020-00.00. 00) D/A stroke: 160 mm lifting capacity: 5300 N rod diameter: Ø 28 mm motor: 0.5 kW 1360 rpm 400 V 3AC IP54 2x approx. 1.0 m connection cable New ! Dimensions: 430 x 115 x 160 mm

Grinding spindle PAGUS P80x160R 5554 Ø 80 mm Dimensions: 260 x 90 x 80 mm

Grinding spindle CCCP BC3 - 70 80 x 300 N 7614 n max: 12000 rpm Ø 80 / 90 mm Dimensions: 450 x 95 x 95 mm M12 attachment: Ø inside 15,Dimensions: 450 x 95 x 95 mmbr /M12br /br /Attachment: Ø inside 15,Dimensions: 450 x 95 x 95 mmbr /br /M12br /br /Attachment: Ø inside 15,05,00 9 mm; Ø outside 28 mm Drive: Ø inside 28.5 mm; Ø outside 40.6 mm

Grinding spindle DKF 6.6 251 / 21 ( 6.251/21 ) n max: 12500 rpm Ø 80 mm conical on both sides Ø 28 to 21 mm x 56 mm flattened to 24 mm Ø 28 to 21.5 mm x 45 mm Dimensions: 360 x 80 x 80 mm

Key data: 25 t, 500 mm

almost unused NEHER screw press with clamping table

Grinding spindle DKF 2.6 - 4 / 1 ( 2.1 6-4/1 ) TGL 4870 ( TGL4870 ) n max: 20000 rpm Ø 60 mm Mounting hole: Ø 13.5 mm (conical) Drive: Ø Spigot: 17.9 mm; Ø Thread: M10 x 1 Dimensions: 300 x 60 x 60 mm

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Spindle bore87 mmDiametre of spindle nose170h5 mmSpindle diametre on front bearing130 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-6000 rpmPower max. (40% DC)10 kWMain drive 1Drive power (100% DC)25 kWTorque (100% DC)280 NmSpeed range25 - 5000 rpmAccuracy at point stopping0,01 degreeFloor space/WeightDimensions (L x W x H)3,99 x 2,69 x 1,99 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the application of an alternating speed for vibration sensitive s ...