spindle moulder used for sale

SPECIFICATIONS: Feed length: 1970 mm Machinable width: 230 mm Machinable height: 120 mm Spindle: Ø 40 mm Number of Spindles: 6 Shaft drive (4 kW) Speed: 6000 rpm Installed power: 43 kW Equipped with ATS system for automatic adjustment Voltage: 380 V SPINDLE CONFIGURATION: I bottom (5 kW) II right (11 kW) III left (11 kW) III above (11 kW) IV top (5.5 kW) VI bottom (4 kW) EQUIPMENT: Complete with tools Accessories CE

SCM T130E spindle moulder Spindle diameter 40mm Overall length of spindles 180mm Spindle speed variable by inverter up to 10,000r.p.m Main motor power 7.5kw Spindle rotation right and left Electronic spindle height adjustment Electronic setting of fences Electronically adjustable roller feed 4-roller feed Maggi Variosteff 4 Feed speed control via variator CE Certified DTR documentation Year of production 2004

SAC SUERI fixed shaft spindle moulder mod. TS110 - CE compliant - Extended 2400 mm plates. -Volt. 400/50 - Matr. 9813 - Year 1998 - M42 - Complete with manual and CE declaration

WEINIG 5-spindle moulder mod. PROFIMAT P23E – CE compliant -Composition: - Oriz. Inf. 5.5Kw -Vert. right/left 7.5Kw - Oriz. sup. 7.5Kw - Oriz. Inf. 4 Kw - Width 230mm - ATS system - Year 1997 (CE)

WEINIG 5+1 spindle moulder mod. PROFIMAT 23 FORTEC - CE compliant - Complete with ATS device - 1st lower horizontal shaft - 2nd vert. Dx - 3rd vert. Sx - 4th upper horizontal - 5° lower horizontal - 6th universal - Width 230 mm. - Cardan drive - Year 2002

Weinig Quatromat 23 Moulder Specifications: Brand: Weinig Type: Q23P (profileerautomaat) Year of Make: 2003 M-No.: 99567 Feed table: 2000 mm Dressing table adjustment range: 10 mm Joining ruler adjustment range: 10 mm Planing width: 13 - 230 mm Planing thickness: 6 - 120 mm Thickness adjustment: Manuel with Siko counter Width adjustment: Manuel with Siko counter Head dimension: Min. 613mm, up to max. 120230mm Knife shafts: Bottom: ø125 mm Right & Left: ø125-200mm Top: ø125-200 mm Adjustment range dressing shaft: 5 mm Spindle adjustment range axial: 30 mm Min. Product Length: Short Workpiece Length Equipment Central Control: Relay Control Lubrication: Spindle arrangement: Bottom 4.0 KW Right + Left Spindle 5.5 kW Above 4.0 kW Speed: 6,000 rpm Feed: 8 m/min Stepless -1.5 kW Steel and rubber rollers. 1 feed roller electro-pneumatically cycled  ...

SCM T150 spindle moulder Spindle diameter 35mm Overall length of spindles 180mm Electric spindle lift Electric fence passage Electrically adjustable angle -10/45 Spindle speed variable 3000-4500-6000-7000-10000r.p.m 5.5kw motor DTR documentation Net price

: 250 m³/min : 200 mbar total power requirement: 5,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SPECIFICATIONS: Feed length: 1970 mm Machinable width: 230 mm Machinable height: 110 mm Spindles: Ø 40 mm Number of Spindles: 4 Shaft drive Installed power: 16 kW Voltage: 380 V Spindle configuration: I bottom: 3.7 kW II right: 5.5 kW III left: 5.5 kW IV: top: 5.5 kW

SPECIFICATIONS: Machine inlet: 1970 mm Working width: 230 mm Working height: 120 mm Spindles: Ø 40 mm Number of Spindles: 6 Shaft drive Installed power: 38 kW Voltage: 380 V SPINDLE CONFIGURATION: 1: bottom (4 kW) 2-3: right-left (11 kW) 4: top (7.5 kW) 5: bottom (5.5 kW) 6: universal (5.5 kW) EQUIPMENT: Miscellaneous Accessories

SPECIFICATIONS: Feed length: 1980 mm Working width: 220 mm Working height: 120 mm Spindle: Ø 40 mm Number of Spindles: 8 Shaft drive (7.5 kW) Installed power: 64 kW Voltage: 380 V SPINDLE CONFIGURATION: 1: bottom (5.5 kW) 2: right (5.5 kW) 3: left (5.5 kW) 4: right (5.5 kW) 5: top (7.5 kW) 6: bottom (7.5 kW) 7: top (11 kW) 8: bottom (7.5 kW) EQUIPMENT: Complete with accessories

Height=1.612 m, Overall length= 1.127 m, Overall width= 0.75 m, Description Belt rounder for rye bread Used in good working condition

REX F-59S Built in 1988 Motor power: 6 / 8 kW (rated current: 16A) Swivel range from -10° to +45° Speeds: 3rd / 4.5 / 6th / 9,000 rpm Milling spindle: 30 + 40 mm Height and swivel adjustment by handwheel Selector switch for left/right rotation Control panel at the top (at eye level) Socket for feed rate Engine brake incl. 2 table extensions Table size: 97.5 x 88 cm Suction nozzle 2 x 120 mm Weight approx. 800 kg Transport dimensions W x D x H (approx. dimensions): W: 110 cm T: 132 cm H: 179 cm

Dimensions (L/W/H): 0x0x0 mm Weight: 190 kg Total power requirement: 2,8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1300x900x1370 mm Weight: 530 kg Total power requirement: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1240x710x1200 mm Weight: 225 kg Total power requirement: 2,8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 220 mm Working height: 120 mm Working height 4-sided: 120 mm Number of Spindles: 10 Spindle arrangement: urlrlououuni Spindle diameter: 50 mm Spindle speed: 6000 rpm Counter bearings: 1-6-7-8-9 Jointer: 1-2-3-4-5-6-7-8-9 Motor powers: 7.5-7.5-11-11-11-15-7.5-11-11- kW Feed speed: 8-80 m/min Feed motor: 18.5 kW Feed: Hydraulic Table lubrication: automatic Weight: 9000 kg Space requirement: 700x160x140 mm Voltage/Frequency: 380V

4 spindles moulder SCM mod. COMPACT 23K Composition: - 1st bottom horizontal spindle - 2nd vertical spindle right - 3rd vertical spindle left - 4th horizontal top - Working width mm. 230 mm. - Infeed table 2000 mm. - Year 2000 - CE rules

Automatic spindle moulder CASADEI mod. MATRIX 5 (4+UNIVERSAL) - CE rules - Year 2005 - Composition: Horizontal bottom Vertical right Vertical left Horizontal top Universal - Total installed power Kw 31,9

Compressor with built-in air dryer Power: 25 kW Pressure: 8 bar

Compressor with built-in air dryer Power: 25 kW Pressure: 8 bar

Dimensions (L/W/H): 1750x1300x1150 mm Weight: 600 kg Total power requirement: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1300x900x1370 mm Weight: 530 kg Total power requirement: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1300x900x1370 mm Weight: 530 kg Total power requirement: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

used vacuum thermoforming machine from Illig in very good condition little used immediately ready for use Dimensions 6 by 5 meters incl. control cabinet and corresponding phereperie devices Pictures to follow

Dough weight min./max.: 80g/1000g, max. output: 1500 pieces/h, motor power: 0.55kW, loading height: 1360mm, output height: 850mm. Machine dimensions X/Y/Z: approx. 1010mm/850mm/690mm, weight: approx. 132kg. Overhauled: revised, new belts, new felt in infeed hopper and outfeed belt. Documentation available. On-site inspection is possible.

Overview This machine was built in 1998 by French manufacturer Sidel. The machine is in very good working condition, is already professionally dismantled and stored in a warehouse. Techn. Details Capacity: 7.200 bph in 1,5L Number of moulds:  6 (molds not included) Equipped with quick change for shell molds Number of heating modules: 10 modules Neck personalization: 29/25           Working hours: 47.000 only            Machine was regularily maintained       Machine equipped with:                     Sidel preforms elevator to unscrambler Sidel preforms unscrambler & feeder Sidel oven & blowing wheel for 6 molds Sidel electrical cabinet Sidel PCC drive & control panel Big set of spare parts list upon request

Overview  This rotary stretch blow moulding machine was manufactured in 2017 by Kosme. The machine is designed for the production of PET bottles for beverage applications. It is equipped with 6 cavities and was used for medium-capacity production. The machine has been dismantled in January 2026 and is available without moulds.  Technical data Capacity: approx. 12,000 bottles/hour Formats: up to 3 L PET bottles Application: PET bottle production Configuration: Rotary stretch blow moulding machine, 6 cavities Neck finish: PCO 1881 Scope of Delivery Blow moulding machine | Kosme | KSB 6R | 2017 | 6-cavity rotary machine, without moulds Preform feeding system  Chiller unit  Air conveyor system  Control system | Integrated HMI

WEINIG Hydromat H23 – with 10 spindles, S/N 89321, built in 1999 WEINIG Cross Transport HighMech E-1, with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Roller Accelerator Model 814 Short infeed table with heavy 4-roller feed Automatic planing machine with reinforced KASCHWIG soundproofing booth 3-sided • Working width max. 230 mm • Working height max. 160 mm • Electronic feed frequency-controlled 8 – 80 m/min. • Feed motor 18.5 KW • 1st spindle bottom 11.0 KW • 2nd spindle right 11.0 KW • 3rd spindle left 11.0 KW • 4th spindle right 11.0 KW • 5th spindle left 11.0 KW • 6th spindle top 15.0 KW • 7th spindle bottom 11.0 KW • 8th spindle top 15.0 KW • 9th spindle bottom 15.0 KW • 10th spindle universal 11.0 KW (4-sided) • Spindle speed 6,000 rpm. • Spindle diameter ø 50 mm • All spindle motors with NEW ...

Overview This blowmoulder was built in 1992 from French manufacturer Sidel. It can produce up to 4.000 bottles per hour. Techn. Details Capacity: 4.000 bph 4 cavities Scope of delivery Blowmoulding machine | SIDEL | SBO 4/6 | 1992 Preform feeder Two types of molds for 1.5 L and 2.0 L bottles Cooling unit: RIEDEL

SCM T130 Low Spindle Milling Machine Spindle diameter 30mm Spindle length 140mm 4kw main motor Rotation speed change on the belt 3000/4500/6000/7000/10000 Longitudinal trolley in the worktop Net price

Overview  This PET blow-moulding machine was manufactured in 2000 by French company SIDEL. The machine is currently in good working condition, running in production until the end of November 2025. It will be dismantled and craned out through the roof, with craning scheduled for December 2025. It becomes available after dismantling. Technical data Capacity: 7,600 bph on 1.0 L Formats: Neck finish 29/21 Preforms processed: RPET Plastipak & Resilux Number of moulds: 6 (moulds not included) Equipment & Features: Quick change for shell molds Sidel caterpillar oven 6 heating modules Sidel preforms tipper Sidel preforms hopper & feeder Sidel preforms infeed rail Sidel caterpillar oven & blowing wheel Solenoid valves Sidel Universal type Sidel PCC version V2.02 Sidel CE electrical cabinet (Siemens) Service history: Sidel maintenance completed September 2024 Elongation sensor retrofitted Additio ...

SCM T130 Low Spindle Milling Machine Spindle diameter 30mm Spindle length 140mm 4kw main motor Rotation speed change on the belt 3000/4500/6000/7000/10000 Longitudinal trolley in the worktop Net price

Gomad FD-2 Low Spindle Milling Machine Spindle Diameter 25mm Spindle length 140mm Main motor 2 speed with a power of 5.9/4.4kw Replacement spindle Rotation speed change on the belt 3000/4500/6000/9000

Overview The BLOMAX 4 blow molder was manufactured by the German company SIG Corpoplast (now KHS) in 2006. It has been overhauled by a machine builder and can be inspected in dry operation. Blow molds are not included, but can be obtained.  Technical details  Output: up to 7,200 bph 4 cavities Dimensions: 4960 mm x 3900 mm x 3000 mm  Weight: 15 t  Operating hours: 44.736  Bottles Volume: 200 ml - 2000 ml   Max. Diameter: 115 mm  Max. Length: 350 mm Preforms  Length: 60 - 200 mm Max. Support ring diameter: 35 mm  Scope of delivery  Blow molder is completely equipped with the system for preform feeding (silo, elevator, sorting, chute)

TECHNICAL DATA: Width of inlet planer: 1970 mm Working width: 250 mm Working height: 150 mm Spinel: Ø 40 mm Number of Spindles: 5 Cardan shaft drive (2.2 kW) Speed: 6000 rpm Installed power: 22 kW Voltage: 380 V SPINDLE CONFIGURATION: I bottom (4 kW) II-III right-left (5.5 kW) IV above (4 kW) V bottom (4 kW) ACCESSORIES: Complete with tools Miscellaneous Accessories

- Spindle 1st dressing with table of 2500mm - Spindle 2. First right spindle - Spindle 3. First left spindle with 2nd axis control (dimension + height + setup) - Spindle 4. Second right spindle with 2nd axis control ( dimension + height ) - Spindle 5th upper spindle as thickness and profile spindle with 1st axis control ( dimension ) - Spindle 6. Lower spindle as plaster spindle or profile spindle - Spindle 7. Universal spindle as profile spindle or glazing strip saw Motors 7 x 7.5 KW 380v 50H. Feed infinitely variable 6-36 m Operating hours per month: average approx. 51 hours

SCM T130 Low Spindle Milling Machine Spindle Diameter 35mm Total length of the spindle 160mm 5.5kw main motor Rotation speed change on the belt 3000/4500/6000/7000/10000 Spindle rotation left and right Electric spindle lift

Capacity: 230 x 120 mm. Spindles: 4 bottom 4 kw fence and near 5,5kW top 5,5 kw Spindle diameter 40 mm Cardan shaft drive, motor 2,2 kW Pneumatic pressures Infeed table 2 m lengte Waxilitpump for bed lubrication, manual Safety hood

Capacity: 230 x 130 mm. Number of shafts: 9 Bottom 7.5 kW, right 7.5 kW, left 7.5 kW, right 7.5 kW, left 7.5 kW , top 7.5 kW, bottom 7.5 kW, top 7.5 kW, bottom 7.5 kW Kardan drive Pneumatic pushers Front surface table Feed rollers for short workpieces Manually operated pump for bed lubrication Shaft diameter: 50 mm. Powered rollers in the table Feed: 6 - 36 m/min Motorized height adjustment

Short infeed table (700 mm) with 2 driven feedrollers above and 1 driven feedroller in the infeed table In the machine 4 driven feedrollers Hardened table (with exception of the infeed table) Separate controll cabinet and electrical cabinet Automatic bed lubrication Pneumatic pressures Outfeed table with height adjustment 0/0,5/1 mm Sound enclosure with electromagnetic security Capacity: width 20 - 230 mm x height 8 - 160 mm (with cutting circles resp. 140 and 163 mm) Feedspeed: 6 - 36 m/min, motor 7,5 kW Number of spindles: 8 Spindle diameter: 50 mm Spindle speed: 6000 rpm Bottom 7,5 kW, outboard bearing Fence 7,5 kW Near 11 kW Fence 11 kW Top 15 kW, outboard bearing, straight jointer Bottom 22 kW, table prepared to take wooden inserts in case of ripping (tool diameter up to 250 mm) Top 11 kW, table prepared to take wooden inserts Bottom 11 kW, outboard bearing, straight jointer

Capacity: 230 x 130 mm. Spindles: 7 Bottom 7,5 kW, right 7,5 kW, left 11 kW, right 7,5 kW, top 11 kW, bottom 11 kW, universal 11kW spindles 2, 3, 4 and 5 are 8000 tr/min straight jointer on 2nd bottom spindle Cardan shaft drive Pneumatic pressures Intermediate driven feedroller for short pieces 0,8 m infeed straightening table manual bed lubrication Spindle diameter: 50 mm. 5 driven rollers in table Feed: 6 - 36 m/min, motor 7,5 kW motor height adjustment

Capacity: 220 x 120 mm. Spindles: 5 Bottom 4kW, fence 4kW, near 4kW, top 4kW, universal 4kW Spindle diameter: 40 mm Motorised thickness adjustment, motor 1,5 kW digital display Infeed table1700 mm long Siko reading on the shaft positioning Protective hood with electrical contact Extension 5 x 140 mm

Kuhn tedder with 8 spinning tops. Haymaking machine equipped with 8 routers, suitable for tedding forage over large areas. The machine has not been tested and is currently not considered functional. Repairs and repair costs are to be expected before use. The exact condition of the various mechanical components is not known. The tedder shows normal signs of wear and tear due to its age and use. It is sold as is, for repair or refurbishment by the buyer. Auction-ID: A3-43543-36116

Completely overhauled Technical details Manufacturer: Pietroberto S.p.A. Model: M2C55 Type: Reversible dough sheeter / dough laminator Year: 2009 Voltage: 3 × 400 V Frequency: 50 Hz Power: Approx. 0.8 kW Certification: CE marked Working width: Approx. 550 mm Configuration: - Reversible conveyor belt system - Dual folding conveyor tables - Adjustable roller gap system - Thickness adjustment wheels with graduated scales - Product collection trays - Emergency stop button - Safety guards installed - Stainless steel product-contact surfaces Application: - Croissant production - Puff pastry processing - Danish pastry production - Pizza dough sheeting - Bakery sheet dough production Construction: - Painted steel frame - Stainless steel food-contact components Condition: Used Observed condition: - Refurbished/repainted exterior - Conveyor belts appear serviceable ...

Overview The KSB3000 blowing machine was manufactured in 2000 by the Austrian machine builder KOSME. It is located at a machine builder and can be visited in dry run to see the functionality of the machine.  Technical details  Capacity: 3.600 bph  3 cavities Dimensions (LxWxH): 6830 mm x 2860 mm x 2450 mm  Space requirement approx. 9x5 m²  Weight: 4,5 t  Operating hours: 23.824   Bottles Volume: 250 ml - 2500 ml   Max. Diameter: 110 mm  Scope of delivery  Blow molding machine is completely equipped with the system for preform feeding (the silo, the preform elevator, the preform aligner and the preform infeed).

Overview  This model USP-2 blow molding machine was manufactured by UROLA in 2002 and is designed for the production of PET bottles with a throughput of 800 bottles per hour for 5-liter bottles and 2,200 bottles per hour for 1-liter bottles. The machine has already been dismantled and stored and can be viewed by appointment. It supports the production of bottles in sizes from 250 ml to 5 liters. Technical details   Output: 800 bottles/hour (5-liter bottles) 2,200 bottles/hour (1 liter bottles) Formats: 250 ml to 5 liters Weight: 3,500 kg Condition: Already dismantled and stored Inspection: Possible by appointment

Work spindle, drill spindle, Tool spindle, HSK 40, AD68mm, Mapal, mint condition Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition! The part was purchased from a spare parts warehouse of a company, was there for a long time in stock but never in operation and is in a completely mint condition. Work spindle, drilling spindle, tool spindle from Mapal, - tool holder HSK 40, incl. flinger ring and cover ring, - Length bearing body 129 x D 68mm, 5 roller bearings AD 68 mm, - Incl. Rotex coupling with gear rim drive side for shaft D25 mm, - Overall dimensions: 270 mm x D 68 mm, 5kg, Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we wi ...

Work spindle, drill spindle, Tool spindle, HSK 50, AD80mm, Mapal, mint condition Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition! The part was purchased from a spare parts warehouse of a company, was there for a long time in stock but never in operation and is in a completely mint condition. Work spindle, drilling spindle, tool spindle from Mapal, - tool holder HSK 50, incl. flinger ring and cover ring, - Length bearing body 149 x D 80mm, 5 roller bearings AD 80mm, - Incl. Rotex coupling with gear rim drive side for shaft D35mm, - Overall dimensions: 305mm x D 80mm, 8kg, Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. Howev ...

Working spindle, drilling spindle, tool spindle, HSK 63, AD80mm, Mapal, as good as new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece there is still a great discount. If you have a VAT number, we will be happy to issue you with an invoice without VAT. As good as new! The part was bought from a spare parts warehouse of a company, has been in stock there for some time but has never been in operation and is completely new Working spindle, drilling spindle, tool spindle from Mapal, - Tool holder HSK 63, incl. centrifugal ring and cover ring - Length of bearing body 149 x D 80mm, 5 rolling bearings AD 80mm, - Incl. Rotex coupling with gear rim drive side for shaft D35mm - Overall dimensions: 305mm x D 80mm, 8kg Functional guarantee! For second-hand parts, we cannot provide a conventional guarantee and w ...