10930 offers spin

maximum number of results exceeded > 1000
please refine your search

Category: 101 boring mills and machining centers / Multi Spindle Drilling Machines
Latest update: 25.05.2020 No.: 145082152
approved
dealer
New in: used
Seller: country-de DMG MORI Used Machines GmbH

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways385 mmTransverse stroke255 mmLongitudinal stroke800 mmClamping chuck diameter max.250 mmMain drive 1Drive power (100% DC)8 kWSpeed range0 - 4500 rpmC-Axis Speed-100 rpmAccuracy at point stopping0,08 degreeWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmBar diametre65 mmSpindle diametre on front bearing130 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988030 mmNumber of driven tools6 Speed max.4500 rpmPower max. (40% DC)5,5 kWFloor space/WeightDimensions (L x W x H)2,67 x 2,22 x 1,81 mWeight approx.4000 KgTailstockQuill taper 4 MKTechnologie cycle alternating speedTechnology cycle for the application of an alternating speed for vibration sensitive set-ups (Only in conjunction with ...

Category: 102 lathes
Latest update: 26.05.2020 No.: 145094696
approved
dealer
New in: 2020
new
Seller: country-de Sperling Werkzeugmaschinen
Location: Werk

turning diameter over bed: 400 mm turning diameter over slide rest: 220 mm centre distance: 1500 mm spindle bore: 52 mm turning dia. in gap: 630 mm length of gap: 240 mm spindle turning speed - stepless: 9 - 1600 U/min turning speeds:: 24 max. torque on the spindle: 1400 metric threading: 0,5 - 224 mm thread - module: 0,5 - 112 thread - inch: 56 - 1/4 DP inch. bed width: 400 mm spindle cone: Gr. 6 longitudinal feeds:: 0,063 - 2,52 mm/U rapid traverse longitudinal: mm/min rapid traverse cross: 1,5 m/min face slide travel: 145 mm upper slide-adjustment: 130 kW diameter of quill: 75 mm thread: 64 Stufen : MT 6 quill stroke: 150 mm dimensions: 2560 x 1050 x 1020 mm total power requirement: 7,5 kW weight of the machine ca.: 3000 kg The highly precise and robust conventional Leitspindeldrehmaschine is particularly suitable for the training, repair and small batch production. The high-performan ...

Category: 101 boring mills and machining centers / Multi Spindle Drilling Machines
Latest update: 25.05.2020 No.: 145082153
approved
dealer
New in: used
Seller: country-de DMG MORI Used Machines GmbH

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways385 mmTransverse stroke255 mmLongitudinal stroke800 mmClamping chuck diameter max.250 mmMain drive 1Drive power (100% DC)8 kWSpeed range0 - 4500 rpmC-Axis Speed-100 rpmAccuracy at point stopping0,08 degreeWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmBar diametre65 mmSpindle diametre on front bearing130 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988030 mmNumber of driven tools6 Speed max.4500 rpmPower max. (40% DC)5,5 kWFloor space/WeightDimensions (L x W x H)2,67 x 2,22 x 1,81 mWeight approx.4000 KgTailstockQuill taper 4 MKTechnologie cycle alternating speedTechnology cycle for the application of an alternating speed for vibration sensitive set-ups (Only in conjunction with ...

Category: 101 boring mills and machining centers / Multi Spindle Drilling Machines
Latest update: 25.05.2020 No.: 145082154
approved
dealer
New in: used
Seller: country-de DMG MORI Used Machines GmbH

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways385 mmTransverse stroke255 mmLongitudinal stroke800 mmClamping chuck diameter max.250 mmMain drive 1Drive power (100% DC)8 kWSpeed range0 - 4500 rpmC-Axis Speed-100 rpmAccuracy at point stopping0,08 degreeWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmBar diametre65 mmSpindle diametre on front bearing130 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988030 mmNumber of driven tools6 Speed max.4500 rpmPower max. (40% DC)5,5 kWFloor space/WeightDimensions (L x W x H)2,67 x 2,22 x 1,81 mWeight approx.4000 KgTailstockQuill taper 4 MKTechnologie cycle alternating speedTechnology cycle for the application of an alternating speed for vibration sensitive set-ups (Only in conjunction with ...

Category: 101 boring mills and machining centers / Multi Spindle Drilling Machines
Latest update: 25.05.2020 No.: 145082155
approved
dealer
New in: used
Seller: country-de DMG MORI Used Machines GmbH

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways385 mmTransverse stroke255 mmLongitudinal stroke800 mmClamping chuck diameter max.250 mmMain drive 1Drive power (100% DC)8 kWSpeed range0 - 4500 rpmC-Axis Speed-100 rpmAccuracy at point stopping0,08 degreeWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmBar diametre65 mmSpindle diametre on front bearing130 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988030 mmNumber of driven tools6 Speed max.4500 rpmPower max. (40% DC)5,5 kWFloor space/WeightDimensions (L x W x H)2,67 x 2,22 x 1,81 mWeight approx.4000 KgTailstockQuill taper 4 MKTechnologie cycle alternating speedTechnology cycle for the application of an alternating speed for vibration sensitive set-ups (Only in conjunction with ...

Category: 101 boring mills and machining centers / Multi Spindle Drilling Machines
Latest update: 25.05.2020 No.: 145082156
approved
dealer
New in: used
Seller: country-de DMG MORI Used Machines GmbH

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways385 mmTransverse stroke255 mmLongitudinal stroke800 mmClamping chuck diameter max.250 mmMain drive 1Drive power (100% DC)8 kWSpeed range0 - 4500 rpmC-Axis Speed-100 rpmAccuracy at point stopping0,08 degreeWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmBar diametre65 mmSpindle diametre on front bearing130 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988030 mmNumber of driven tools6 Speed max.4500 rpmPower max. (40% DC)5,5 kWFloor space/WeightDimensions (L x W x H)2,67 x 2,22 x 1,81 mWeight approx.4000 KgTailstockQuill taper 4 MKTechnologie cycle alternating speedTechnology cycle for the application of an alternating speed for vibration sensitive set-ups (Only in conjunction with ...

Category: 102 lathes
Latest update: 26.05.2020 No.: 145089837
approved
dealer
New in: 2019
used
Seller: country-de FEYEN Maschinen GmbH
Location: ab Auslieferungslager

turning diameter over bed: 1320 mm turning diameter over slide rest: 940 mm turning length: 1500 mm centre height: 625 mm turning dia. in gap: 1510 mm bed width: 700 mm spindle bore: 155 mm spindle taper:: DIN 55027 Gr. 15 spindle turning speed range: 24 / 5 - 1000 rpm. spindle motor: 30 kW weight of the machine ca.: 8,55 t dimensions of the machine ca.: 1,5 x 6,2 x 1,7 m Machinelight: Electric for three-phase 400 Volt: carriage-rapid traverse: digital readout in 3 axis: ACU-RITE 4 station steel holder: Power traverse in the top carriage: Chip protect bonnet: Chip protection behind: Diverse tools: Tailstock unit motorized adjustable: chip pan: 2 Stück New Machine, will be manufactured after ordering delivery time: approx. 3 months with big spindle passage 155 mm and automatic feed in the top support the base machine is without chuck and steady pictures show a used machine The ...

Category: 101 boring mills and machining centers / Multi Spindle Drilling Machines
Latest update: 25.05.2020 No.: 145082158
approved
dealer
New in: used
Seller: country-de DMG MORI Used Machines GmbH

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways385 mmTransverse stroke255 mmLongitudinal stroke800 mmClamping chuck diameter max.250 mmMain drive 1Drive power (100% DC)8 kWSpeed range0 - 4500 rpmC-Axis Speed-100 rpmAccuracy at point stopping0,08 degreeWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmBar diametre65 mmSpindle diametre on front bearing130 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988030 mmNumber of driven tools6 Speed max.4500 rpmPower max. (40% DC)5,5 kWFloor space/WeightDimensions (L x W x H)2,67 x 2,22 x 1,81 mWeight approx.4000 KgTailstockQuill taper 4 MKTechnologie cycle alternating speedTechnology cycle for the application of an alternating speed for vibration sensitive set-ups (Only in conjunction with ...

Category: 101 boring mills and machining centers / Multi Spindle Drilling Machines
Latest update: 25.05.2020 No.: 145082159
approved
dealer
New in: used
Seller: country-de DMG MORI Used Machines GmbH

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways385 mmTransverse stroke255 mmLongitudinal stroke800 mmClamping chuck diameter max.250 mmMain drive 1Drive power (100% DC)8 kWSpeed range0 - 4500 rpmC-Axis Speed-100 rpmAccuracy at point stopping0,08 degreeWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmBar diametre65 mmSpindle diametre on front bearing130 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988030 mmNumber of driven tools6 Speed max.4500 rpmPower max. (40% DC)5,5 kWFloor space/WeightDimensions (L x W x H)2,67 x 2,22 x 1,81 mWeight approx.4000 KgTailstockQuill taper 4 MKTechnologie cycle alternating speedTechnology cycle for the application of an alternating speed for vibration sensitive set-ups (Only in conjunction with ...

Category: 101 boring mills and machining centers / Multi Spindle Drilling Machines
Latest update: 25.05.2020 No.: 145082160
approved
dealer
New in: used
Seller: country-de DMG MORI Used Machines GmbH

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways385 mmTransverse stroke255 mmLongitudinal stroke800 mmClamping chuck diameter max.250 mmMain drive 1Drive power (100% DC)8 kWSpeed range0 - 4500 rpmC-Axis Speed-100 rpmAccuracy at point stopping0,08 degreeWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmBar diametre65 mmSpindle diametre on front bearing130 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988030 mmNumber of driven tools6 Speed max.4500 rpmPower max. (40% DC)5,5 kWFloor space/WeightDimensions (L x W x H)2,67 x 2,22 x 1,81 mWeight approx.4000 KgTailstockQuill taper 4 MKTechnologie cycle alternating speedTechnology cycle for the application of an alternating speed for vibration sensitive set-ups (Only in conjunction with ...

Category: 202 milling machines / Spindle moulders
Latest update: 23.12.2019 No.: 122377777
approved
dealer
New in: new
Seller: country-at ZIEGLER Maschinen & Werkzeuge

Holzmann FSN-300A - table milling machine Spindle Ã?: 30 mm Spindle speed: 1400, 3500, 6000, 8000 RPM Spindle stroke: 140 mm Spindle: clamping height: 90 mm Spindle rotation: - 5° to + 45 ° Table opening: 190 mm Max tool Ã?: retractable 175 mm Max tool diameter: about table 200 mm Integral stop: 900 mm Table: 1000 x 450 mm Table height: 910 mm Suction connection: 100 mm Engine power: 2,2 kW Voltage: 400 V Dimensions WxHxD: 1150 x 1400 x 900 mm Weight: 270 kg Facilities: A.a..

Category: 101 boring mills and machining centers / Multi Spindle Drilling Machines
Latest update: 25.05.2020 No.: 145082161
approved
dealer
New in: used
Seller: country-de DMG MORI Used Machines GmbH

Working areaSwing diameter over guide ways385 mmTransverse stroke255 mmLongitudinal stroke800 mmClamping chuck diameter max.250 mmGeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Main drive 1Drive power (100% DC)8 kWSpeed range0 - 4500 rpmC-Axis Speed-100 rpmAccuracy at point stopping0,08 degreeWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmBar diametre65 mmSpindle diametre on front bearing130 mmTool holder 1Number of tool stations12 Number of driven tools6 Shank diametre according to DIN 6988030 mmSpeed max.4500 rpmPower max. (40% DC)5,5 kWFloor space/WeightDimensions (L x W x H)2,67 x 2,22 x 1,81 mWeight approx.4000 KgTailstockQuill taper 4 MKTechnologie cycle alternating speedTechnology cycle for the application of an alternating speed for vibration sensitive set-ups (Only in conjunction with ...

Category: 101 boring mills and machining centers / Multi Spindle Drilling Machines
Latest update: 25.05.2020 No.: 145082162
approved
dealer
New in: used
Seller: country-de DMG MORI Used Machines GmbH

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways385 mmTransverse stroke255 mmLongitudinal stroke800 mmClamping chuck diameter max.250 mmMain drive 1Drive power (100% DC)8 kWSpeed range0 - 4500 rpmC-Axis Speed-100 rpmAccuracy at point stopping0,08 degreeWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmBar diametre65 mmSpindle diametre on front bearing130 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988030 mmNumber of driven tools6 Speed max.4500 rpmPower max. (40% DC)5,5 kWFloor space/WeightDimensions (L x W x H)2,67 x 2,22 x 1,81 mWeight approx.4000 KgTailstockQuill taper 4 MKTechnologie cycle alternating speedTechnology cycle for the application of an alternating speed for vibration sensitive set-ups (Only in conjunction with ...

Category: 202 milling machines / Spindle moulders
Latest update: 23.12.2019 No.: 122377782
approved
dealer
New in: new
Seller: country-at ZIEGLER Maschinen & Werkzeuge

Holzmann FSN 300F - table milling machine Spindle Ã?: 30 mm Spindle speed: 1400, 3500, 6000, 8000 RPM Spindle stroke: 140 mm Spindle: clamping height: 90 mm Spindle rotation: - 5° to + 45 ° Table opening: 190 mm Max tool Ã?: retractable 175 mm Max tool diameter: about table 200 mm Integral stop: 900 mm Table: 1000 x 450 mm Table height: 910 mm Suction connection: 100 mm Engine power: 2,2 kW Voltage: 400 V Dimensions WxHxD: 1150 x 1400 x 900 mm Weight: 270 kg Facilities: A.a..

Category: 102 lathes
Latest update: 26.05.2020 No.: 145090376
approved
dealer
New in: 1988
used
Seller: country-de Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
Location: Metzingen

number of spindles: 6 spindle passage: 20 mm turning length: 80 mm total power requirement: 25 kW weight of the machine ca.: 6,5 t Max. bar Ø, normal 20 mm Max. bar Ø, square, hexagonal, octagonal 14 / 17 / 18 mm Max. bar feed 80 mm Stroke of longitudinal slide 63 / 39.5 mm Boring depth, max. 39.6 mm Stroke of cross slide, max. 32 / 25 mm Stroke of lower cross slide 40 / 26 mm 49 Spindle speeds 355 - 5,000 rpm No. of workpiece revolutions per work cycle 60 - 1.32 35 cutting times per part 0.36 - 53 sec Spindle drive 20.5 kW Total electrical load 25 kW - 380 V - 50 Hz Weight, approx. 6,500 kg Accessories / Special Features Built-on bar loading magazine for bar length up to 4,000 mm. Swing-in bar stop. Dnt = direct selection of spindle speed and cycle time. The machine has a separate infinitely variable feed drive for optimal adaptation (via potentiometer) of cutting speed and  ...

Category: 101 boring mills and machining centers
Latest update: 13.04.2020 No.: 119625822
approved
dealer
New in: 1987
used
Seller: country-de Frank Sprengel Metallbearbeitungsmaschinen

Spare parts for table drilling rig SVO / Stankoimport / Gertner, Fuhrmeister & CO Such as. complete drilling spindle SK50 (Please note the attached pdf-file with a drawing of the spindle) Ball roller spindles from the three axes Electric motors, feed motor 3x, main spindle motor complete control Siemens or control cabinet Control panel with digital device Glass mass Removable flat disc diameter 360mm Radial movement of the support of the flat disc 100mm Transformer / Transformer Angular drill head Sub-apparatus Spindle diameter 110 mm Tool holder ISO 50 Technical data of the original machine Travel laengs approx. 1,000 mm Cross-travel approx. 1,600 mm Vertical travel 1,000mm Laeng movement of the extendable spindle 710mm Speed range 10-1.250 rpm Main engine 11kw Speeds 10 - 1,250 rpm in 22 gear stages Extensive machine documentation including user manual ...

Category: 102 lathes
Latest update: 26.05.2020 No.: 145094751
approved
dealer
New in: 2020
new
Seller: country-de Sperling Werkzeugmaschinen
Location: Werk

turning diameter over bed: 500 mm turning diameter over slide rest: 300 mm centre distance: 1500 mm spindle bore: 82 mm turning dia. in gap: 710 mm length of gap: 240 mm spindle turning speed - stepless: 9 - 1600 U/min turning speeds:: 24 max. torque on the spindle: 1400 metric threading: 0,5 - 224 mm thread - module: 0,5 - 112 thread - inch: 56 - 1/4 DP inch. bed width: 400 mm spindle cone: Gr. 8 Camlock longitudinal feeds:: 0,063 - 2,52 mm/U rapid traverse longitudinal: 4,5 mm/min face feeds: 0,027 - 1,07 mm/U rapid traverse cross: 1,5 m/min face slide travel: 145 mm upper slide-adjustment: 130 kW thread: 64 Stufen diameter of quill: 75 mm : MT 6 quill stroke: 150 mm dimensions: 3060 x 1020 x 1350 mm total power requirement: 7,5 kW weight of the machine ca.: 3300 kg The machines ST16k25 series, is a highly accurate and robust conventional L + Z lathe. The high-performance spindle drive ...

Category: 102 lathes
Latest update: 26.05.2020 No.: 145094769
approved
dealer
New in: 2020
new
Seller: country-de Sperling Werkzeugmaschinen
Location: Werk

turning diameter over bed: 500 mm turning diameter over slide rest: 300 mm centre distance: 2000 mm spindle bore: 82 mm turning dia. in gap: 710 mm length of gap: 240 mm spindle turning speed - stepless: 9 - 1600 U/min turning speeds:: 24 max. torque on the spindle: 1400 metric threading: 0,5 - 224 mm thread - module: 0,5 - 112 thread - inch: 56 - 1/4 DP inch. bed width: 400 mm spindle cone: Gr. 8 Camlock longitudinal feeds:: 0,063 - 2,52 mm/U rapid traverse longitudinal: 4,5 mm/min face feeds: 0,027 - 1,07 mm/U rapid traverse cross: 1,5 m/min face slide travel: 145 mm upper slide-adjustment: 130 kW diameter of quill: 75 mm thread: 64 Stufen : MT 6 quill stroke: 150 mm dimensions: 3560 x 1020 x 1350 mm total power requirement: 7,5 kW weight of the machine ca.: 3800 kg The machines ST16k25 series, is a highly accurate and robust conventional L + Z lathe. The high-performance spindle drive ...

Category: 502 presses
Latest update: 11.05.2019 No.: 135506809
approved
dealer
New in: 2009
used
Seller: country-de
Location: 40699 Erkrath, Kattendahler str. 42

The ALBERT SDA spindle direct drive is a universally deployable linear propulsion system for a wide range of areas in mechanical engineering. Bes2l3tvhu As a use in single-drive applications for linear drive tasks, the spindle direct drive is perfectly suited. Several SDA can also be electrically synchronized via the motors attached. With the help of four sizes and a versatile accessory program, the design of the ALBERT SDA spindle dianter drive can be optimally adapted to customer-specific requirements and requirements. The fully encapsulated housing unit, equipped with a robust axial and radial storage, guarantees life-long life. By swivel cones and swivel consoles on the case, the SDA spindle direct drive can be easily converted into a swivel version. Using engine bell and clutches or growing equipment, a wide variety of engines, transmission motors and cone wheel gearbox ...

Category: 101 boring mills and machining centers / Multi Spindle Drilling Machines
Latest update: 25.05.2020 No.: 145482874
approved
dealer
New in: used
Seller: country-de DMG MORI Used Machines GmbH

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways385 mmTransverse stroke255 mmLongitudinal stroke800 mmClamping chuck diameter max.250 mmMain drive 1Drive power (100% DC)8 kWSpeed range0 - 4500 rpmC-Axis Speed-100 rpmAccuracy at point stopping0,08 degreeWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmBar diametre65 mmSpindle diametre on front bearing130 mmFloor space/WeightDimensions (L x W x H)2,67 x 2,22 x 1,81 mWeight approx.4000 KgTool holder 1Number of tool stations12 Shank diametre according to DIN 6988030 mmNumber of driven tools6 Speed max.4500 rpmPower max. (40% DC)5,5 kWTailstockQuill taper 4 MKTechnologie cycle alternating speedTechnology cycle for the application of an alternating speed for vibration sensitive set-ups (Only in conjunction with ...

Category: 202 milling machines / Spindle moulders
Latest update: 09.01.2020 No.: 144503162
New in: 1980
used
Seller: country-de fwb-Maschinenhandel GmbH
Location: 32683 Barntrup
Price: 1.700 €

Table cutter Schneider Type SK 2/4 II Built in 1980 Spindle diameter 30mm Spindle length 150mm Table size 1150 mm x 850 mm Engine strength 5.5 kW Spindle rotation with left and right-hand run Height adjustment of the spindle with handwheel Measuring clock for height adjustment in the handwheel Table opening maximum 470 mm Mechanical spindle deceleration Weight 750 kg Dimensions approx. 1200x800 height 1100mm

Category: 101 boring mills and machining centers / Multi Spindle Drilling Machines
Latest update: 25.05.2020 No.: 145482875
approved
dealer
New in: used
Seller: country-de DMG MORI Used Machines GmbH

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways385 mmTransverse stroke255 mmLongitudinal stroke800 mmClamping chuck diameter max.250 mmMain drive 1Drive power (100% DC)8 kWSpeed range0 - 4500 rpmC-Axis Speed-100 rpmAccuracy at point stopping0,08 degreeWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmBar diametre65 mmSpindle diametre on front bearing130 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988030 mmNumber of driven tools6 Speed max.4500 rpmPower max. (40% DC)5,5 kWFloor space/WeightDimensions (L x W x H)2,67 x 2,22 x 1,81 mWeight approx.4000 KgTailstockQuill taper 4 MKTechnologie cycle alternating speedTechnology cycle for the application of an alternating speed for vibration sensitive set-ups (Only in conjunction with ...

Category: 101 boring mills and machining centers / Multi Spindle Drilling Machines
Latest update: 25.05.2020 No.: 145482876
approved
dealer
New in: used
Seller: country-de DMG MORI Used Machines GmbH

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways385 mmTransverse stroke255 mmLongitudinal stroke800 mmClamping chuck diameter max.250 mmMain drive 1Drive power (100% DC)8 kWSpeed range0 - 4500 rpmC-Axis Speed-100 rpmAccuracy at point stopping0,08 degreeWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmBar diametre65 mmSpindle diametre on front bearing130 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988030 mmNumber of driven tools6 Speed max.4500 rpmPower max. (40% DC)5,5 kWFloor space/WeightDimensions (L x W x H)2,67 x 2,22 x 1,81 mWeight approx.4000 KgTailstockQuill taper 4 MKTechnologie cycle alternating speedTechnology cycle for the application of an alternating speed for vibration sensitive set-ups (Only in conjunction with ...

Category: 101 boring mills and machining centers / Multi Spindle Drilling Machines
Latest update: 25.05.2020 No.: 145482877
approved
dealer
New in: used
Seller: country-de DMG MORI Used Machines GmbH

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways385 mmTransverse stroke255 mmLongitudinal stroke800 mmClamping chuck diameter max.250 mmMain drive 1Speed range0 - 4500 rpmDrive power (100% DC)8 kWC-Axis Speed-100 rpmAccuracy at point stopping0,08 degreeWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmBar diametre65 mmSpindle diametre on front bearing130 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988030 mmNumber of driven tools6 Speed max.4500 rpmPower max. (40% DC)5,5 kWFloor space/WeightDimensions (L x W x H)2,67 x 2,22 x 1,81 mWeight approx.4000 KgTailstockQuill taper 4 MKTechnologie cycle alternating speedTechnology cycle for the application of an alternating speed for vibration sensitive set-ups (Only in conjunction with ...

Category: 102 lathes
Latest update: 26.05.2020 No.: 145094781
approved
dealer
New in: 2020
new
Seller: country-de Sperling Werkzeugmaschinen
Location: Werk

turning diameter over bed: 500 mm turning diameter over slide rest: 300 mm centre distance: 1000 mm spindle bore: 82 mm turning dia. in gap: 710 mm length of gap: 240 mm spindle turning speed - stepless: 9 - 1600 U/min turning speeds:: 24 max. torque on the spindle: 1400 metric threading: 0,5 - 224 mm thread - module: 0,5 - 112 thread - inch: 56 - 1/4 DP inch. bed width: 400 mm spindle cone: Gr. 8 Camlock longitudinal feeds:: 0,063 - 2,52 mm/U rapid traverse longitudinal: 4,5 mm/min face feeds: 0,027 - 1,07 mm/U rapid traverse cross: 1,5 m/min face slide travel: 145 mm upper slide-adjustment: 130 kW thread: 64 Stufen diameter of quill: 75 mm : MT 6 quill stroke: 150 mm dimensions: 2560 x 1020 x 1350 mm total power requirement: 7,5 kW weight of the machine ca.: 3000 kg The machines ST16k25 series, is a highly accurate and robust conventional L + Z lathe. The high-performance spindle drive ...

Category: 102 lathes
Latest update: 26.05.2020 No.: 145094787
approved
dealer
New in: 2020
new
Seller: country-de Sperling Werkzeugmaschinen
Location: Werk

turning diameter over bed: 500 mm turning diameter over slide rest: 300 mm centre distance: 1000 mm spindle bore: 52 mm turning dia. in gap: 710 mm length of gap: 240 mm spindle turning speed - stepless: 9 - 1600 U/min turning speeds:: 24 max. torque on the spindle: 1400 metric threading: 0,5 - 224 mm thread - module: 0,5 - 112 thread - inch: 56 - 1/4 DP inch. bed width: 400 mm spindle cone: Gr. 8 longitudinal feeds:: 0,063 - 2,52 mm/U rapid traverse longitudinal: 4,5 mm/min face feeds: 0,027 - 1,07 mm/U rapid traverse cross: 1,5 m/min face slide travel: 145 mm upper slide-adjustment: 130 kW thread: 64 Stufen diameter of quill: 75 mm : MT 6 quill stroke: 150 mm dimensions: 3060 x 1020 x 1350 mm total power requirement: 7,5 kW weight of the machine ca.: 3200 kg The machines ST16k25 series, is a highly accurate and robust conventional L + Z lathe. The high-performance spindle drive allows  ...

Category: 101 boring mills and machining centers
Latest update: 26.05.2020 No.: 145119888
approved
dealer
New in: used
Seller: country-de Theodor Eberlei GmbH & Co.KG
Location: 26215 Wiefelstede, Germany
Price: 2.150 €

Drilling machine, standing drilling machine, column drilling machine, pillar drilling machine, multi-spindle head, multi-spindle drilling head, drilling gear -with two-spindle drilling head manufacturer Sigloch Schrieder type V602 -Drill distance adjustable 20-110 mm -max drill 2x O 6 mm -Table size 275 mm -spindle mount MK3 -projection 220 mm -Speeds 100-2900 rpm -Columns O 100 mm -spindle stroke 75 mm -Transmission -Dimensions 900/400 / H1910 mm -Weight 230 kg

Category: 102 lathes
Latest update: 15.05.2020 No.: 126133139
approved
dealer
New in: 1997
used
Seller: country-de CBW Böhmer Werkzeugmaschinen

Precision lathe with cycle automatic Make: Hamlet Model: E 70 x 2000 Year of construction: 1997 For food and feed shaft machining Technical data: Workspace Turning length: 2000 mm Swing over bed: 720 mm Swing over cross slide plan: 430 mm Displacement of the plan slide: 410 mm Bed width: 480 mm 3prpek3uq Spindle nose ACC. to DIN 55027: size 11 Spindle diameter in front bearing: 150 mm Spindle bore: 106 mm Inside taper of the main spindle: 112 metric Control: Siemens 805 Spindle gearbox newly stored according to the manufacturer ca. 2.500 EUR

Category: 102 lathes
Latest update: 24.07.2019 No.: 122953365
approved
dealer
New in: 1990
used
Seller: country-de D Cunha Industriemaschinen GmbH
Location: D - Niedersachsen

CNC vertical lathe with 2 spindles and loading device Control: Siemens Sinumerik 850T Circulation diameter over bed: 500 mm Turning diameter max.: 400 mm travel distances: X1 / X2: 350 / 350 mm Z1 / Z2: 450 / 450 mm /Z 16,000 mm/min. Spindle left and right Spindle bearing diameter: 130 mm Spindle drive power: 42 kW spindle speeds: 28 - 2,500 rpm Spindle torque: 1,166 Nm Feed diameter: 315 mm tool positions left/right: 4 / 4 Zubehoer: Spaenefoerderer Tool monitoring 2-axis with turning station between the spindles Note: Swing loader defective but easy to repair; X Achen guides with light grooves, machine produces parts with 0.07 mm tolerances machine ideal for series !; Well

Category: 101 boring mills and machining centers / Multi Spindle Drilling Machines
Latest update: 25.05.2020 No.: 145082274
approved
dealer
New in: used
Seller: country-de DMG MORI Used Machines GmbH

General2-Axes Universal Turning Center with driven tools, C-axis; Control: DMG MORI Slimline Fanuc i Series Working areaSwing diameter over guide ways580 mmClamping chuck diameter max.250 mmWork spindle (left)Spindle bore73 mmBar diametre65 mmSpindle diametre on front bearing120 mmMain drive 1Drive power (100% DC)11 kWDrive power (40% DC)16,5 kWSpeed range- 5000 rpmTorque (100% DC)112 NmMax. torque (40% DC)168 NmC-Axis Speed-100 rpmTorque of C-Axis (holding torque)168 NmSlide 1Longitudinal stroke540 mmTransverse stroke242,5 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988030 mmNumber of driven tools12 Speed max.-5500 rpmPower max. (40% DC)5,44 kWFloor space/WeightDimensions (L x W x H)2,8 x 1,78 x 1,85 (3,68 x 1,78 x 1,85) mWeight approx.4700 KgEasy Tool Monitor FanucTool monitoring software device by Fanuc CNCAlternative Speed TurningTechnology cycle Alterna ...

Category: 101 boring mills and machining centers
Latest update: 26.05.2020 No.: 146557603
approved
dealer
New in: used
Seller: country-de Surplex GmbH
Location: Frankreich, Region Val-dOise
Price: used machinery auction RESALE 100 €

Weight approx.: 300 kg Dimensions (l x w x h) approx.: 800 x 500 x 1900 mm Description: Table surface: 350 x 350mm - Max. distance between spindle nose and intermediate table: 725mm - Max. distance between spindle nose and base: 1200mm - Vertical table stroke: 700mm - Distance between spindle axis and column: 240mm - Number of spindle speeds: 6 - Spindle speed: 100 to 860 rpm - Rotary table: yes - Coolant pump: no - Automatic lowering: no - Motor: 1.1kw Stock number 97646

Category: 202 milling machines
Latest update: 26.05.2020 No.: 145123502
approved
dealer
New in: 1999
used
Seller: country-de Theodor Eberlei GmbH & Co.KG
Location: 26215 Wiefelstede, Germany
Price: 5.500 €

Swivel spindle milling machine, swivel spindle milling machine, spindle milling machine, table milling machine, table milling machine -Digital display height and angle -Spindle adjustment Electromotive height and angle -Swiveling -5° to 45° -Drive 6.25 kW -Speed 1500-10,000 rpm -Long support table -Vorschubapparat Haffner 4 rolls -Use length of shaft 135 mm -Alu milling stop -Spindle O 30 mm -Max. Cutter O 240 mm -Max. Slotted tools O 350 mm -Dimensions 2600/1300 / H1700 mm -Weight 1100 kg

Category: 101 boring mills and machining centers / Multi Spindle Drilling Machines
Latest update: 25.05.2020 No.: 146218931
approved
dealer
New in: used
Seller: country-de DMG MORI Used Machines GmbH

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways385 mmTransverse stroke255 mmLongitudinal stroke800 mmClamping chuck diameter max.250 mmMain drive 1Drive power (100% DC)8 kWSpeed range0 - 4500 rpmC-Axis Speed-100 rpmAccuracy at point stopping0,08 degreeWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmBar diametre65 mmSpindle diametre on front bearing130 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988030 mmNumber of driven tools6 Speed max.4500 rpmPower max. (40% DC)5,5 kWFloor space/WeightDimensions (L x W x H)2,67 x 2,22 x 1,81 mWeight approx.4000 KgTailstockQuill taper 4 MKTechnologie cycle alternating speedTechnology cycle for the application of an alternating speed for vibration sensitive set-ups (Only in conjunction with ...

Category: 101 boring mills and machining centers / Multi Spindle Drilling Machines
Latest update: 25.05.2020 No.: 146218932
approved
dealer
New in: used
Seller: country-de DMG MORI Used Machines GmbH

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways385 mmTransverse stroke255 mmLongitudinal stroke800 mmClamping chuck diameter max.250 mmMain drive 1Drive power (100% DC)8 kWSpeed range0 - 4500 rpmC-Axis Speed-100 rpmAccuracy at point stopping0,08 degreeWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmBar diametre65 mmSpindle diametre on front bearing130 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988030 mmNumber of driven tools6 Speed max.4500 rpmPower max. (40% DC)5,5 kWFloor space/WeightDimensions (L x W x H)2,67 x 2,22 x 1,81 mWeight approx.4000 KgTailstockQuill taper 4 MKTechnologie cycle alternating speedTechnology cycle for the application of an alternating speed for vibration sensitive set-ups (Only in conjunction with ...

Category: 101 boring mills and machining centers / Multi Spindle Drilling Machines
Latest update: 25.05.2020 No.: 146218933
approved
dealer
New in: used
Seller: country-de DMG MORI Used Machines GmbH

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways385 mmTransverse stroke255 mmLongitudinal stroke800 mmClamping chuck diameter max.250 mmMain drive 1Drive power (100% DC)8 kWSpeed range0 - 4500 rpmC-Axis Speed-100 rpmAccuracy at point stopping0,08 degreeWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmBar diametre65 mmSpindle diametre on front bearing130 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988030 mmNumber of driven tools6 Speed max.4500 rpmPower max. (40% DC)5,5 kWFloor space/WeightDimensions (L x W x H)2,67 x 2,22 x 1,81 mWeight approx.4000 KgTailstockQuill taper 4 MKTechnologie cycle alternating speedTechnology cycle for the application of an alternating speed for vibration sensitive set-ups (Only in conjunction with ...

Category: 101 boring mills and machining centers / Multi Spindle Drilling Machines
Latest update: 25.05.2020 No.: 146218934
approved
dealer
New in: used
Seller: country-de DMG MORI Used Machines GmbH

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways385 mmTransverse stroke255 mmLongitudinal stroke800 mmClamping chuck diameter max.250 mmMain drive 1Drive power (100% DC)8 kWSpeed range0 - 4500 rpmC-Axis Speed-100 rpmAccuracy at point stopping0,08 degreeWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmBar diametre65 mmSpindle diametre on front bearing130 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988030 mmNumber of driven tools6 Speed max.4500 rpmPower max. (40% DC)5,5 kWFloor space/WeightDimensions (L x W x H)2,67 x 2,22 x 1,81 mWeight approx.4000 KgTailstockQuill taper 4 MKHollow clamping attachment 67 mmHydraulic hollow clamping attachment, inner dia. of draw tube max. Ø67 mm (Ø2.63 in) (Hydraulic power pack, B-H4010, re ...

Category: 101 boring mills and machining centers / Multi Spindle Drilling Machines
Latest update: 25.05.2020 No.: 146218935
approved
dealer
New in: used
Seller: country-de DMG MORI Used Machines GmbH

Working areaSwing diameter over guide ways385 mmTransverse stroke255 mmLongitudinal stroke800 mmClamping chuck diameter max.250 mmGeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Main drive 1Drive power (100% DC)8 kWSpeed range0 - 4500 rpmC-Axis Speed-100 rpmAccuracy at point stopping0,08 degreeWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmBar diametre65 mmSpindle diametre on front bearing130 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988030 mmNumber of driven tools6 Speed max.4500 rpmPower max. (40% DC)5,5 kWFloor space/WeightDimensions (L x W x H)2,67 x 2,22 x 1,81 mWeight approx.4000 KgTailstockQuill taper 4 MKTechnologie cycle alternating speedTechnology cycle for the application of an alternating speed for vibration sensitive set-ups (Only in conjunction with ...

Category: 101 boring mills and machining centers / Multi Spindle Drilling Machines
Latest update: 25.05.2020 No.: 146218936
approved
dealer
New in: used
Seller: country-de DMG MORI Used Machines GmbH

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways385 mmTransverse stroke255 mmLongitudinal stroke800 mmClamping chuck diameter max.250 mmMain drive 1Drive power (100% DC)8 kWSpeed range0 - 4500 rpmC-Axis Speed-100 rpmAccuracy at point stopping0,08 degreeWork spindle (left)Diametre of spindle nose170h5 mmSpindle noseFlat flange Spindle bore87 mmBar diametre65 mmSpindle diametre on front bearing130 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988030 mmNumber of driven tools6 Speed max.4500 rpmPower max. (40% DC)5,5 kWFloor space/WeightDimensions (L x W x H)2,67 x 2,22 x 1,81 mWeight approx.4000 KgTailstockQuill taper 4 MKTechnologie cycle alternating speedTechnology cycle for the application of an alternating speed for vibration sensitive set-ups (Only in conjunction with ...

Category: 102 lathes
Latest update: 26.05.2020 No.: 145094584
approved
dealer
New in: 2020
new
Seller: country-de Sperling Werkzeugmaschinen
Location: Werk

turning diameter over bed: 400 mm turning diameter over slide rest: 220 mm centre distance: 1000 mm spindle bore: 105 mm turning dia. in gap: 630 mm length of gap: 240 mm spindle turning speed - stepless: 9 - 1600 U/min turning speeds:: 24 max. torque on the spindle: 1400 metric threading: 0,5 - 224 mm thread - module: 0,5 - 112 thread - inch: 56 - 1/4 DP inch. bed width: 400 mm spindle cone: Gr. 6 longitudinal feeds:: 0,063 - 2,52 mm/U rapid traverse longitudinal: 4,5 mm/min rapid traverse cross: 1,5 m/min face slide travel: 145 mm upper slide-adjustment: 130 kW thread: 64 Stufen diameter of quill: 75 mm : MT 6 quill stroke: 150 mm dimensions: 2210 x 1050 x 1020 mm total power requirement: 7,5 kW weight of the machine ca.: 2800 kg The highly precise and robust conventional Leitspindeldrehmaschine is particularly suitable for the training, repair and small batch production. The high-perf ...

Category: 102 lathes
Latest update: 26.05.2020 No.: 145094602
approved
dealer
New in: 2020
new
Seller: country-de Sperling Werkzeugmaschinen
Location: Werk

turning diameter over bed: 500 mm turning diameter over slide rest: 300 mm centre distance: 1000 mm spindle bore: 105 mm turning dia. in gap: 710 mm length of gap: 240 mm spindle turning speed - stepless: 36 - 1600 U/min turning speeds:: 24 max. torque on the spindle: 1400 metric threading: 0,5 - 224 mm thread - module: 0,5 - 112 thread - inch: 56 - 1/4 DP inch. bed width: 400 mm spindle cone: Gr. 8 Camlock longitudinal feeds:: 0,063 - 2,52 mm/U rapid traverse longitudinal: 4,5 mm/min face feeds: 0,027 - 1,07 mm/U rapid traverse cross: 1,5 m/min face slide travel: 145 mm upper slide-adjustment: 130 kW diameter of quill: 75 mm thread: 64 Stufen : MT 6 quill stroke: 150 mm dimensions: 2560 x 1020 x 1350 mm total power requirement: 7,5 kW weight of the machine ca.: 3000 kg The machines ST16k25 series, is a highly accurate and robust conventional L + Z lathe. The high-performance spindle dri ...

Category: 101 boring mills and machining centers / Multi Spindle Drilling Machines
Latest update: 25.05.2020 No.: 146301392
approved
dealer
New in: used
Seller: country-de DMG MORI Used Machines GmbH

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways385 mmTransverse stroke255 mmLongitudinal stroke800 mmClamping chuck diameter max.250 mmMain drive 1Drive power (100% DC)8 kWSpeed range0 - 4500 rpmC-Axis Speed-100 rpmAccuracy at point stopping0,08 degreeWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmBar diametre65 mmSpindle diametre on front bearing130 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988030 mmNumber of driven tools6 Speed max.4500 rpmPower max. (40% DC)5,5 kWFloor space/WeightDimensions (L x W x H)2,67 x 2,22 x 1,81 mWeight approx.4000 KgTailstockQuill taper 4 MKTechnologie cycle alternating speedTechnology cycle for the application of an alternating speed for vibration sensitive set-ups (Only in conjunction with ...

Category: 109 other metal working machines
Latest update: 26.05.2020 No.: 145142231
approved
dealer
New in: used
Seller: country-de Pagus Maschinenhandel Online Shop
Location: D - Sachsen , Hohenprießnitz
Price: 2.200 €

motor spindle, high-speed spindle, Quick-up spindle s/br />-br />GMN-br />-br />TSE 80cdu x 315 - 6007-br />-br />R 329282-br />-br />-br />Diameter: 80 mm-br/>-br />Spindle-length: 315 mm-br />-br />Motor: PER SKE VA 60.11-2"br />"br />3.7 kW"br />"br />11580 - 17340 rpm"br /> "br />230 / 400 V 3AC"br />"br />"br />200 - 300 Hz"br />"br />"br />ca. 1.2 m Connection cable s/br />-br />used, overhauled !>-br/>Dimensions(spindle): 630 x 140 x 170 mm-br />-br />Dimensions(packaging): 760 x 190 x 180 mm-br />-br />

Category: 109 other metal working machines
Latest update: 26.05.2020 No.: 145142232
approved
dealer
New in: used
Seller: country-de Pagus Maschinenhandel Online Shop
Location: D - Sachsen , Hohenprießnitz
Price: 2.400 €

motor spindle, high-speed spindle, Quick-up spindle />"br />GMN-br />"br />HSP150dh-24000/9"br />"br />"br />"br />"br />"br />"br />"br />"br/>Spindle length: 310 mm"br />"br />"2/ / 9 / 9 / 7 kW /> />11000 / 15000 / 18000 / 24000 rpm /br /> />"br />400 V 3AC"br /> />br />367 / 533 / 600 / 800 Hz-br />"br />" 1.0 m Connection Cable -br />-br />used, refurbished !>"br />"br />Dimensions(spindle): 460 x 190 x 170 mm-br />"br />Dimensions(packaging): 740 x 260 x 290 mm-br />"br />

Category: 102 lathes
Latest update: 26.05.2020 No.: 145094881
approved
dealer
New in: 2020
new
Seller: country-de Sperling Werkzeugmaschinen
Location: Werk

turning diameter over bed: 500 mm turning diameter over slide rest: 300 mm centre distance: 1500 mm spindle bore: 105 mm turning dia. in gap: 710 mm length of gap: 240 mm spindle turning speed - stepless: 36 - 1600 U/min turning speeds:: 24 max. torque on the spindle: 1400 metric threading: 0,5 - 224 mm thread - module: 0,5 - 112 thread - inch: 56 - 1/4 DP inch. bed width: 400 mm spindle cone: Gr. 8 Camlock longitudinal feeds:: 0,063 - 2,52 mm/U rapid traverse longitudinal: 4,5 mm/min face feeds: 0,027 - 1,07 mm/U rapid traverse cross: 1,5 m/min face slide travel: 145 mm upper slide-adjustment: 130 kW diameter of quill: 75 mm thread: 64 Stufen : MT 6 quill stroke: 150 mm dimensions: 3060 x 1020 x 1350 mm total power requirement: 7,5 kW weight of the machine ca.: 3300 kg The machines ST16k25 series, is a highly accurate and robust conventional L + Z lathe. The high-performance spindle dri ...

Category: 109 other metal working machines
Latest update: 26.05.2020 No.: 145094370
approved
dealer
New in: 1996
used
Seller: country-de Ralf Schmeißer Werkzeugmaschinen
Location: 89312 Günzburg

turning diameter over bed: 320 mm turning diameter over slide rest: 175 mm turning length: 650 mm turning speed range: 48 - 2500 U/min feeds - longitudinal: 0,02 - 0,63 mm/U feeds - cross: 0,32 x Längsvorschub mm/U 3-jaw-chuck diameter: max.165 mm centre height: 160 mm spindle bore: 40 mm spindle head: 55027 / 5 Motor power: 2,4/ 3 kw Optical condition: very good: Mechanic: very good: The machine can be viewed under current.: 4075 380 V - 50 Hz colour: new repainting (2 K lacquer) white/light grey Compliance with the Machinery Directive motor brake spindle protection integrated in emergency stop chain new spindle protection chips back wall guide and tension spindle cover emergency stop switch 2 x, maintained change gear box with limit switch interrogated tail stock safeguarding bidding and prohibition sign regarding to machine guideline Equipment: 3-axis digital display Ele ...

Category: 102 lathes
Latest update: 26.05.2020 No.: 145094882
approved
dealer
New in: 2020
new
Seller: country-de Sperling Werkzeugmaschinen
Location: Werk

turning diameter over bed: 500 mm turning diameter over slide rest: 300 mm centre distance: 2000 mm spindle bore: 105 mm turning dia. in gap: 710 mm length of gap: 240 mm spindle turning speed - stepless: 36 - 1600 U/min turning speeds:: 24 max. torque on the spindle: 1400 metric threading: 0,5 - 224 mm thread - module: 0,5 - 112 thread - inch: 56 - 1/4 DP inch. bed width: 400 mm spindle cone: Gr. 8 Camlock longitudinal feeds:: 0,063 - 2,52 mm/U rapid traverse longitudinal: 4,5 mm/min face feeds: 0,027 - 1,07 mm/U rapid traverse cross: 1,5 m/min face slide travel: 145 mm upper slide-adjustment: 130 kW thread: 64 Stufen diameter of quill: 75 mm : MT 6 quill stroke: 150 mm dimensions: 3560 x 1020 x 1350 mm total power requirement: 7,5 kW weight of the machine ca.: 3800 kg The machines ST16k25 series, is a highly accurate and robust conventional L + Z lathe. The high-performance spindle dri ...

Category: 202 milling machines / Spindle moulders
Latest update: 07.02.2020 No.: 144925155
approved
dealer
New in: used
Seller: country-it TOMESANI Srl
Location: 22063 Cantù - COMO
Price: 1.800 €

Code: 0022 Brand: SCM Model: T 160 Spindle moulder with tilting spindle Technical data: Spindle inclination 0 to 45° Spindle reverse rotation Table dimensions 1000 x1000 Spindle diameter mm 35 Rotation speed 2900-4400-6000-7800-10000 rpm Motor power Hp 5,5 Overall dimensions: mm 1075 x 1120 x 850 h Weight kg 930

Category: 202 milling machines / Tilting spindle moulders
Latest update: 09.01.2020 No.: 135360483
approved
dealer
New in: 1991
used
Seller: country-de S-MA GmbH
Location: Thüringen

Swing spindle fraesis m. Zubehoer SMA-REF-6205 Category: Swerving spindle mills Manufacturer: SCM Type: T 150 Built: 1991 spindle: 30 mm spindle 6 kW Specifics: Electr. Spindle adjustment -5/45 ° 3-reel feed condition: ready for action Under electricity Location: Thuringia Dimensions: Weight: 1 t Availability: Instantly Delivery conditions: From location Payment conditions: 100% before depletion/loading

Category: 101 boring mills and machining centers
Latest update: 26.05.2020 No.: 145093860
approved
dealer
New in: 1962
used
Seller: country-ch Gromag AG
Location: Grenzach-Wyhlen
Price: 800 €

number of spindles: 12 number of spindle speeds: 750-2800 table-size: 120x230 mm spindle motor: 2,2 kW total power requirement: 3,2 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: m Multi-spindle boring machine manual control No. of spindle connections 12 Internal dimensions of bell-type spindle housing 130 mm Distance between table and upper position of bell 220 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 102 lathes
Latest update: 26.05.2020 No.: 145094629
approved
dealer
New in: 2020
new
Seller: country-de Sperling Werkzeugmaschinen
Location: Werk

turning diameter over bed: 500 mm turning diameter over slide rest: 300 mm centre distance: 1000 mm spindle bore: 52 mm turning dia. in gap: 710 mm length of gap: 240 mm spindle turning speed - stepless: 9 - 1600 U/min turning speeds:: 24 max. torque on the spindle: 1400 metric threading: 0,5 - 224 mm thread - module: 0,5 - 112 thread - inch: 56 - 1/4 DP inch. bed width: 400 mm spindle cone: Gr. 8 longitudinal feeds:: 0,063 - 2,52 mm/U rapid traverse longitudinal: 4,5 mm/min rapid traverse cross: 1,5 m/min face slide travel: 145 mm upper slide-adjustment: 130 kW thread: 64 Stufen diameter of quill: 75 mm : MT 6 quill stroke: 150 mm dimensions: 2560 x 1050 x 1020 mm total power requirement: 7,5 kW weight of the machine ca.: 2900 kg The machines ST16k25 series, is a highly accurate and robust conventional L + Z lathe. The high-performance spindle drive allows workpieces with a length of up ...

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)