135,425 used machines on RESALE, but how to find them? Machine Search
Here we have a Weiler DZ 65, 16-fold Duplomatic Stern turret, 2 spindles, collet head for both spindles, driven tool on all Rev places, Chip conveyor, coolant through 2 spindle, spring ejector 2nd spindle, rod feeder connection, parts removal via drip tray, parts conveyor belt, various spindle insert tubes, chip conveyor, material feed Irco Profimat 3m,
Technical data Lead and pull spindle lathe Manufacturer: NARDINI Type: ND 220 AE Speed range: 25 - 2000 rpm Electrical connection: 380 V / 50 Hz Connected load: 6.3 kW 3-jaw chuck Ø approx. 250 mm Configuration With guide and pull spindle With tailstock With quick-change steel holder Tapping device available Feed and thread tables on the machine Integrated machine substructure Emergency stop switch available Machine with splash guard Auction-ID: A7-49302-3016
Technical data Manufacturer: K. Martin Maschinenfabrik, Offenburg Type / Model: KM 40 Design: conventional lathe Spindle speeds: 31.5 / 45 / 63 / 90 / 125 / 180 / 250 / 355 / 500 / 710 / 1,000 / 1,400 rpm Configuration 3-jaw chuck Tailstock Tool Holder Operating instructions for KM 40 lathe available Remarks The machine comes from a well-maintained company liquidation and was actively used in ongoing production until the end. Auction-ID: A7-49302-183
Table dimensions: 2.000 x 815 mm Motor output: 7,5 kW Spindle diameter: 30 /40 mm reus: 1.500-10.000 U/min Weight: ca. 820 kg swival range +/-: -45,5° bis +45,5° ° table height: 890 mm height adjustment: ca. 145 mm tool taper: MK5 : Ja : Ja Dust suction hood: 120 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Lot used various spindles and linear guides. Various mix including pallet and pallet edges. Auction-ID: A1-48529-133
Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Rated current: 20 A Tip length: 1000 mm Center height above bed: 250 mm Turning diameter over bed: 500 mm Center height over support: 150 mm Turning diameter over support: approx. 300 mm Spindle passage: approx. 58 mm The machine is equipped with a tailstock, a Multifix turning steel holder and a three-jaw chuck FORKARDT, diameter: 200 mm also a two-axis digital display from the manufacturer HEIDENHAIN Speed: up to 2500 rpm Auction-ID: A7-49089-410
reifenhause, enka technica spunbond nonwoven spinerettes. hollow fiber spinerette , standard fiber spinerrete, fine fiber spinerettes. from 5.000 - 45.000 eur
HS9000 High Speed Milling Spindle / Angular Milling Head Type: High speed milling spindle head / angular milling attachment Manufacturer: Nikko / Nikken Model: HS9000 Application: Milling, drilling and machining operations on machining centres or special machines This item is delivered loaded on truck or container. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-49190-29
Auxiliary high-speed spindle / machining head with taper shank and cable/hose connection. Used accessory for machine tools; exact taper, speed and electrical specifications to be confirmed. Auction-ID: A1-49190-41
Capacity 230 x 120 mm 5 spindles: Bottom 7,5 kW? Fence / Near 11 kW ? Top 7,5 kW ? Bottom 5,5 kW Spindle speed 6000 rpm Variable feed speed 6 to 24 m/min, motor 4 kW Straightening table 2000 mm Driven table roller Mechanical/digital read-out Centralised lubrication CE sound/safety hood Interior light Hopperfeed EM 11, upt to 60 cycles/min Workpiece length: 350 to 3000 mm Workpiece width: 20 to 230 mm Workpiece thickness: 12 to 70 mm Air requirement: 8 bar, connection DN8 Extraction requirement: 840 - 9600 m3/h, air speed 30 - 34 m/s Tooling not included
Wooden sling jaws (with long right sling jaw) Tool Ø max. 180 mm Speed 1,700/3,500/6,000/8,000 rpm (manual belt reposition) Connection 400 V, 3~, 50 Hz, 5A, 2.2 kW Weight approx. 156 kg
table top; mounted on steel/wood base; total size 1300x600x1400 mm; Auction-ID: A1-49001-45
Panhans 240A Low Spindle Milling Machine Spindle diameter 30mm Spindle length 130mm Spindle speed variable 3000/4500/6000/9000r.pm Electronic spindle height adjustment Electronic angle adjustment Main motor power 11kw Additional longitudinal carriage mounted to the workbench 3-roller feed Net price
Lead and pull spindle lathe VEB DLZ 280 Center width: 900 mm Tip height over support: 90 mm Tip height above bed: 140 mm incl. accessories as shown ! Dimensions: 2,200 x 1,200 x 1800 mm Video: youtu.be/CeVz3o2XVus Auction-ID: A7-49701-12
Various types and models, packed and unpacked, in and including plastic crate. Auction-ID: A1-41279-116
incl. additional indexing table 4/5 axis machining Not included clamps and chuck Auction-ID: A1-48648-128
With vibratory feeder and digital controller Auction-ID: A1-48377-22
twin-spindle chucking lathe, year 2002, CNC 21 TB. Used machine in good condition. More info & price on IndustrialBuyer.
Panhans swivel spindle milling machine with 4-roller feed Type: 231 Series: 2000 Year of manufacture: 2000 CE Table size L 1100 mm x W 760 mm Table height 870 mm Motor power 5.5 kW Speeds 3000/4500/6000/9000 rpm. Height adjustment of the milling mandrel 120 mm Milling mandrel diameter 30 mm Swivel range -5° to +45° Height adjustment and swivel by handwheel Suction nozzle diameter 2 x 120 mm 400 V/N/PE / 50 Hz / 3 pH Current type AC Full load current 22 A with 4-roller feed with some tools complete with operating instructions Machine is in very good condition, as very little used, max. 100 operating hours Net weight 630 mm
twin-spindle CNC lathe, year 2008, CNC 180i-TB. Used machine in good condition. More info & price on IndustrialBuyer.
twin-spindle chucking lathe, year 2000, CNC 18i-TB. Used machine in good condition. More info & price on IndustrialBuyer.
twin-spindle chucking lathe, year 1999, CNC 18-T. Used machine in good condition. More info & price on IndustrialBuyer.
Aigner guides. Feeder.round router protection. Auction-ID: A1-49727-1
Professional Industrial Machine (400Volt) 3-axis digital display 3-jaw chuck 180 mm. 4-jaw chuck 200 mm. Face Plate 280mm Fixed bezel Steady bezel 4-fold steel holder. Halogen Machine Light Machine Light Foot brake removable chip tray, Chip protection wall Hardened and ground bed sheets Complete coolant system Feed protection Machine Tools Turning diameter over bed 360 mm Turning diameter over support 220 mm Turning length 1000 mm Turning diameter in the offset 380 mm Speed 70 - 2000 rpm Center height 180 mm Spindle bore 50 mm Tailstock quill holder MK 3 MK Connection voltage 230 V Total power requirement 1.8 kW Machine weight approx. 0.65 t Space requirement approx. 2.0 x 0.8 x 1.56 m Condition: never used / new (5) Auction-ID: A7-49782-571
Lathes with: - 4-fold steel holder - 3-jaw chuck 315mm - Centering tip Turning diameter over bed 500 mm Turning diameter over support 320 mm Turning length 2100 mm Center height 250 mm Spindle bore 60 mm Spindle speeds 11 - 2000 rpm Total power requirement 7.0 kW Machine weight approx. 2.9 t Dimensions approx. 4.3 x 1.2 x 1.3 mm Auction-ID: A7-49782-438
Professional Industrial Machine Digital display 3-jaw chuck 200 mm. 4-jaw chuck Face Plate Fixed bezel Steady bezel Multifix steel holder. Machine Light Foot brake Chip tray, Chip protection wall Hardened and ground bed sheets Complete coolant system Feed protection Machine feet Machine Tool Turning diameter over bed 400 mm Turning diameter over support 260 mm Turning length 1500 mm Turning diameter in the offset 570 mm Speed 45 - 1800 rpm Tip height 210 mm Spindle bore 52 mm Tailstock quill holder MK 4 Connection voltage 400 V Total power requirement 3.5 kW Machine weight approx. 1.5 t Dimensions approx. 2.6 x 1.1 x 1.7 m Auction-ID: A7-49782-424
Lead and pull spindle lathe Three-jaw chuck 200mm Multifix Steel Bracket Size B 3 Multifix cassettes Emergency Stop Facility Turning diameter over bed 370 mm Turning diameter over support 200 mm Turning length 1000 mm Center height 185 mm Spindle bore 56 mm Tailstock quill holder MK 4 Speed 50 - 2000 rpm Drive power 4.0 kW Machine weight approx. 1.4 t Dimensions approx. 2.3 x 1.1 x 1.3 m Auction-ID: A7-49782-403
Technical data Manufacturer: Colchester Model: Mascot 1600 Machine Type: Lead and Pull Spindle Lathe Lead screw pitch: 6 mm Multi-stage speed selection, labeling visible up to 1,600 rpm Configuration 3-jaw chuck Fixed bezel Tailstock Tool Holder / Multiple Steel Holder Thread and feed tables on the machine Remarks The machine comes from a well-maintained company liquidation and was actively used in ongoing production until the end. Auction-ID: A7-49302-186
Lead and pull spindle lathe - 4-jaw chuck 200mm - Multifix steel bracket size B - Foot brake - Chip tray Turning diameter over bed 420 mm Turning diameter over support 290 mm Turning length 900 mm Speed 40 - 2000 rpm Tip height 210 mm Spindle bore 38 mm Total power requirement 4.0 KW Machine weight approx. 0.9 t Space requirement approx. 2.4 x 1.1 x 1.3 m Condition: unchecked (6) Auction-ID: A7-49782-499
Professional lathe 3-jaw chuck 4-jaw chuck Face Plate Fixed bezel Steady bezel Quick-change steel holder with 4 cassettes Halogen Machine Light Chip tray, Chip protection wall Hardened and ground bed sheets Complete coolant system Feed protection Machine Tools Turning diameter over bed 320 mm Turning diameter over support 200 mm Turning length 900 mm Speed 75 - 2000 rpm Tip height 160 mm Spindle bore 50 mm Tailstock quill mount MK 3 Connection voltage 230 V Total power requirement 1.5 kW Machine weight approx. 0.29 t Space requirement approx. 2.0 x 0.8 x 1.56 m Condition: never used / new (5) Auction-ID: A7-49782-498
3-jaw chuck 200mm 4-fold steel holder Turning diameter 350mm Turning diameter via support 210 in offset 500mm Turning length 1000mm Speed 20 - 1400rpm Spindle bore 36mm Motor 2.0 KW Weight 600Kg Dimensions 2.2 x 1.0 x 1.5m Auction-ID: A7-49782-493
Professional lathe Digital display 3-jaw chuck 4-jaw chuck Face Plate Fixed bezel Steady bezel Quick-change steel holder with 4 cassettes Halogen Machine Light Chip tray, Chip protection wall Hardened and ground bed sheets Complete coolant system Feed protection Machine Tools Rotating center punch Turning diameter over bed 320 mm Turning diameter over support 200 mm Turning length 900 mm Speed 75 - 2000 rpm Tip height 160 mm Spindle bore 50 mm Tailstock quill holder MK 3 MK Connection voltage 230 V Total power requirement 1.5 kW Machine weight approx. 0.29 t Space requirement approx. 2.0 x 0.8 x 1.56 m Condition: never used / new (5) Auction-ID: A7-49782-442
Lead and pull spindle lathe VEB DLZ 450 / 2000 Center width: 2,000 mm Tip height above bed: 250 mm Tip height above support: 150 mm Speed: 16 - 2240 rpm (18 steps) Spindle bore: Ø 45 mm 380V 3AC 50Hz 21A 10.3kW Dimensions: 3,600 x 1,000 x 1,400 mm Auction-ID: A7-49701-10
General Description Horizontal spindle surface grinding machine, model FG251 , designed for precision grinding of flat surfaces on tool steel, hardened components and precision mechanical parts. The machine is equipped with a hydraulic reciprocating table and automatic table reversing for efficient surface grinding operations. Technical Details Model: FG251 Machine type: Horizontal spindle surface grinding machine Horizontal grinding spindle Vertical wheel-head feed Hydraulic longitudinal table movement Manual cross feed Automatic table reversing Speed/feed selector panel Lubrication system with original lubrication diagram Integrated hydraulic and electrical cabinet in the rear column Approximate table travel: 700–900 mm Approximate table width: 200–250 mm Condition Used industrial condition. The machine appears complete with grinding spindle, hydraulic table dr ...
Serial number: 0577 Voltage: 400 V Frequency: 50 Hz Tip height: 280 mm Distance between tips: 2000 mm Circulation diameter over bed: 560 mm Circulation diameter over cross slide: 390 mm Rotation diameter in offset: 810 mm Spindle bore: 80 mm Spindle holder: MK 7 Centering tip holder: MK 5 Spindle speed: 20 - 1600 rpm Motor power: 7.5 kW Bed width: 345 mm Bed length: 2650 mm Travel cross slide: 265 mm travel upper slide: 135 mm Travel tailstock: 180 mm Diameter tailstock quill: 75 mm Diameter lead screw: 35 mm Pitch lead screw: 6 mm incl. two-axis digital display, manufacturer EASSON, type: ES-8, as well as three-jaw chuck, diameter: approx. 400 mm with Multifix base holder and tailstock and an additional steady rest and a side cabinet with stock of turning steels, turning steel holders, reducing sleeves and other clamping jaws Reference: Wowi - Lot 40 Auction-ID: A7-49056-188
STUDER internal grinding spindle – 40,000 rpm with accessories High-speed spindle for internal grinding STUDER is for sale, in excellent condition and properly stored in its original wooden protection box. Key features: - Type: 102540B - Maximum speed: 40,000 rpm - Compatibility: Studer S30, S40, S31, Favorit, etc. - Application: Internal grinding - High-precision construction. - Includes wheel holders/accessories and tools shown in the photographs. - Includes documentation and instructions. - Wooden box for storage and transport. Ideal as a replacement for STUDER grinding machines, for replacing an existing spindle or for repair projects. The set is delivered with the available accessories shown in the photographs, offering a particularly interesting solution for grinding workshops that need hard-to-find STUDER original equipment. National and inter ...
3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Face Plate 320mm Fixed bezel Steady bezel 4-fold steel holder. Halogen Machine Light Machine Light Foot brake removable chip tray, Chip protection wall Hardened and ground bed sheets Complete coolant system Feed protection Machine Tools Turning diameter over bed 400 mm Turning diameter over support 264 mm Turning length 1000 mm Turning diameter in the offset 550 mm Speed 44 - 2000 rpm Center height 200 mm Spindle bore 52 mm Tailstock quill holder MK 4 MK Connection voltage 400 V Total power requirement 1.5 / 2.4 kW Machine weight approx. 0.9 t Dimensions approx. 1.9 x 0.8 x 1.56 m Condition: never used / new (5) Auction-ID: A7-49782-557
BIGLIA B565 SM (2014) is a two-spindle CNC turning center, equipped with a GE Fanuc Series 32i MODEL B control and an S+M configuration with sub-spindle and rotating tools. Capabilities: Maximum turning diameter: 290 mm Maximum turning length: 560 mm Main spindle bar passage: Ø 65 mm Passage diameter above the bed: 580 mm Main pin: Speed: 30 to 4,000 RPM Spindle Nose: ASA 6\" Spindle Bore: 76 mm Chuck: 210 / 250 mm Engine power: 26 kW / 15 kW C-axis resolution: 0.001° Sub-spindle (S): Speed: 30 to 5,000 rpm Spindle Nose: ASA 5\" Chuck: 165 mm Engine power: 11 kW B-axis stroke: approx. 560 mm Turret and rotating tools (M): 12 positions, all motorizable Index time: 0.15 s Rotating tool speed: 30 to 4,000 rpm (6,000 rpm optional) Rotating tool power: 5.5 kW Tool section: 25 ...
General Description Twin-opposed spindle CNC turning center manufactured by Shanghai SIO Electromechanical Technology Co., Ltd. , model FC-500 . Designed for high-productivity machining of shafts and similar components by enabling simultaneous or sequential machining from both ends. The machine is equipped with Siemens CNC control, hydraulic workholding and automatic chip removal. Technical Details Manufacturer: Shanghai SIO Electromechanical Technology Co., Ltd. Model: FC-500 Machine type: CNC twin-spindle turning center Year: 2019 Serial number: 20191011 Power supply: 400 V, 50 Hz Connected load: 25 kVA Twin opposed spindle configuration Siemens SINUMERIK CNC control Siemens SINAMICS servo drives INVT frequency inverters Hydraulic workholding system Automatic lubrication Chip conveyor Electronic handwheel (MPG) Precision linear guideways Ball screw driven axes ...
Guide and tension spindle lathe machine - With photocopying device - 3-jaw chuck 200mm - 2 Mutifix quick-change steel holders - Moving center punch - Machine light - Chip tray Turning diameter over bed 410 mm Turning diameter over support 260 mm Turning length 1000 mm Turning diameter in the offset mm Speed 40 - 2000 rpm Center height 205 mm Spindle bore 50 mm Total power requirement 4.5 KW Machine weight approx. 1.6 t Dimensions approx. 2.4 x 1.3 x 1.5 m Auction-ID: A7-49782-510
Technical data Manufacturer: EMCO Model: Maximat Super 11 Speeds: 55 / 110 / 200 / 300 / 410 / 600 / 1100 / 2200 rpm 8 speed levels Digital display: ELESTA VISULESTA II E Hardened machine bed Configuration 3-jaw chuck available Additional 3-jaw chuck Collet holder with collet set Quick-change steel holder Tailstock available Accessories with tool holders and tips Machine in used condition Auction-ID: A7-49302-3061
Serial number: 109640 Power: 8 kW Voltage: 400 V Frequency: 50 Hz incl. digital display ACU-RITE incl. tailstock, Multifix grain holder and three-jaw chuck, diameter: approx. 310 mm Center height: 330 mm Center width: 3000 mm Center height in offset: 435 mm Bridge length: 240 mm Spindle bore: 82 mm Max. torque: 1500 Nm Spinde speed: 9 - 1600 rpm Top slide travel: 145 mm Cross slide travel: 310 mm Tool Dimensions: 25 x 25 mm Tailstock Cone: MK 5 Quill Diameter: 75 mm Quill Travel: 150 mm Reference: Wowi - Lot 67 Auction-ID: A7-49056-192
Spindle speed: from 21 to 1500 rpm Spindle passage: approx. 78 mm Center length: approx. 1800 mm Center height above bed: approx. 300 mm Turning diameter over bed: approx. 600 mm Center height over support: approx. 200 mm Turning diameter over support: approx. 400 mm, the machine is equipped with a tailstock, a turning steel holder and a four-jaw chuck from the manufacturer RÖHM, diameter: 350 mm Reference: STS - Lot 9 Auction-ID: A7-49056-250
SINO Digital Display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Face Plate 250mm Fixed bezel Quick-change steel holder with 4 pcs steel holder Machine Light Chip tray, Chip protection wall Hardened and ground bed sheets Feed protection Machine Tools Turning diameter over bed 320 mm Turning diameter over support 200 mm Turning length 900 mm Turning diameter in the offset 320 mm Speed 75 - 2000 rpm Tip height 160 mm Spindle bore 38 mm Tailstock quill mount MK 3 Connection voltage 400 V Total power requirement 1.5 kW Machine weight approx. 0.4 t Space requirement approx. 1.6 x 0.75 x 1.7 m Condition: never used / new (5) Auction-ID: A7-49782-500
Turning diameter over bed: 400 mm, over face slide 246 mm Lead screw diameter: 32 mm Drive: Electric motor main motor: 7.7 kW. Auction-ID: A7-49604-10
maximum number of results exceeded
please refine your search
1.000 € 
