british flag
Resale Logo

spin used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information boilers  Maschinen-Metscher  http://www.maschinen-metscher.de 
banner logo
start page > keywords spin > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
7 8 9 10 11 12 13 14 <  page 15  > 16 17 18 19 20 21 22 23
125726420 202

MARTIN T 21 for sale
Spindle moulders


Used table milling machine internal engine number: m2609 manufacturer Martin type T 21 Ma. Number of unknown 72672 built performance 4.7/5,7 kW speeds from 3,000 to 9,000 rpm. Weight approx. 900 kg with sliding tabl ...
used machine
 
Used table milling machine internal engine number: m2609 manufacturer Martin type T 21 Ma. Number of unknown 72672 built performance 4.7/5,7 kW speeds from 3,000 to 9,000 rpm.
Weight approx. 900 kg with sliding table with feed motor Haffner with additional 40 mm spindle with accessories qualified off

Item location: 58730 Fröndenberg/Ruhr

The machine can be visited like to see power and tried out.

We will gladly send you more photos by E-Mail.

A forklift/crane for loading is available.

We reserve the right to a sale.

There is the way learned to examine suburb for sale articles. Specific questions should be clarified in advance. The information, technical data, dimensions, year, condition are non-binding and were shown to the best of my knowledge and belief. Errors are reserved. The warranty / guarantee is excluded. The goods will be sold from location / camp, with national transfer of risk to the buyer, this also applies to a shipping from us, which we have carried out on your behalf. This offer is only to traders, merchants and legal persons.
Specified trade names, and trademarks are property of their owners and are used only for identification and description of products.

The structure and the electrical connection of the machine / the device must be carried out by a qualified person trained or checked.

See also my other offers.

The article must be paid unless otherwise agreed within 14 days of invoice creation and picked up.
Otherwise, the cost of the storage charge must be made.
 
2,900 €  
    request
125755914 101

CHIRON FZ 18 W MAGNUM for sale
Vertical Machining Centre


Weight approx.: 5000 kgcontrol: SIEMENS SINUMERIK 810 M Dimensions (l x w x h) approx.: 6500 x 1900 x 2600 mmtaper: SK 40 turning speed range: 20 - 10500 rpmDescription: CHIRON FZ 18 W MAGNUM Vertical Machining Centre (4 ...
used machine
 
Weight approx.: 5000 kg
control: SIEMENS SINUMERIK 810 M
Dimensions (l x w x h) approx.: 6500 x 1900 x 2600 mm
taper: SK 40
turning speed range: 20 - 10500 rpm
Description: CHIRON FZ 18 W MAGNUM Vertical Machining Centre (4-Axis)
- serial no.: 430-68
- 4th axis dividing attachment
- with pallet shuttle table and tool changer
- inclusive operating instructions, data backup CD and disc
- KNOLL 350 K-1 chip conveyor
- cooling water basin
- the missing cover of spindle and tool changer on the photos is available and included in delivery
- single dimensions: 3700 x 1900 x 2600 mm + 2800 x 1900 x 1400 mm
- for further information see photos
1991
used machinery auction RESALE 2,300 €  
  DE   request
125726393 103

BOHLE FS100 for sale
Universal Milling Machines


A milling machine is offered of the manufacturer Bohle here. The machine is in good condition and can be visited like in our warehouse. Technical data: Manufacturer: Plank Type: FS100 Year of construction: 1970  ...
used machine
 
A milling machine is offered of the manufacturer Bohle here.
The machine is in good condition and can be visited like in our warehouse.

Technical data:
Manufacturer: Plank
Type: FS100
Year of construction: 1970

Table clamping surface: 630 x 1600 mm
Clamping grooves: Number 5
X/Y/Z path: 1,250/850/500 mm

Feed X-Y: Max 4,000 mm / min
Z: maximum 2,000 mm / min feed

Rapid traverse x-Y: 10, 000 mm / min
Rapid traverse z 5000 mm / min

Headstock - head continuously adjustable in two axes
Taper: ISO 50

Infinitely variable spindle speed in the range of the spindle: 14-3500 RPM
Max power spindle: 19 kW

Total wattage: 40 kVA

Transport dimensions: 4,000 x 2,400 x 2,400 mm

Leasing/financing available. Please enquire.
Free loading truck
Price Excl. VAT
For more information see also pictures or manufacturer's website.
Sales invoice. The VAT is shown separately on the invoice
Visit any time by appointment only possible and desirable.
It used no guarantee or warranty.
Delivery possible. Please enquire
Errors and omissions as well as subject to prior sale
1970
5,500 €  
    request
125755916 101

CHIRON FZ 12 S for sale
Vertical Machining Centre


Weight approx.: 2500 kgcontrol: SIEMENS SINUMERIK 810 M workpiece weight: 4 kgDimensions (l x w x h) approx.: 2500 x 1600 x 2400 mmtoolchanger positions: 12 taper: SK 30 turning speed range: 20 - 7100 rpmspindle torque:  ...
used machine
 
Weight approx.: 2500 kg
control: SIEMENS SINUMERIK 810 M
workpiece weight: 4 kg
Dimensions (l x w x h) approx.: 2500 x 1600 x 2400 mm
toolchanger positions: 12
taper: SK 30
turning speed range: 20 - 7100 rpm
spindle torque: 35 Nm
Description: CHIRON FZ 12 S Vertical Machining Centre
- electrical connection: min. 12 kVA
- pneumatic connection: 5 - 7 bar
- drill performance in ST 60: diameter 20 mm
- thread cutting performance: M 16
- milling performance in ST 60: 85 cm³/min
- main spindle motor AC: 5,5 kW
- spindle bearing diameter: 50 mm
- injection force: 3000 N
- feed travel Z: 425 mm
- rapid traverse Z: 24 m/min
- feed force Z: 4000 N
- feed travel Y: 300 mm
- rapid traverse Y: 24 m/min
- feed force Y: 3000 N
- feed travel X: 550 mm
- rapid traverse X: 24 m/min
- feed force X: 3000 N
- programmed feed in all 3 axes: 1 - 4000 mm/min
- fixed table - table load: max. 500 kg
- clamping surface: 950 x 370 mm²
- distance between spindle holder - table surface: 370 - 795 mm
- jib length spindle centre - column: 330 mm
- tool diameter at fully places: max. 65 mm
- tool diameter with next free places: max. 100 mm
- tool length: max. 220 mm
- tool weight: max. 4 kg
- multi spindle head holder: max. diameter 100 mm, weight: 4 kg
- with cooling water basin, documentation and parameter perforation strip
- attention: three tool holder cassettes are defect and need to be exchanged
- for further information see photos
1992
used machinery auction RESALE 1,900 €  
  DE   request
125726372 101

MAZAK VC NEXUS 510-C-II for sale
Vertical Numerically Controlled Machining Centres


1 off. vertical M/C MAZAK VC NEXUS 510-C-II courtesy. year 2010 Mazatrol matrix control movements: X: 1,050 mm Y: 530 mm Z: 510 mm Spindle motor 18.5 kW Max spindle speed 12,000 rpm ATC 30 tools SK-40 system  ...
used machine
 
1 off. vertical M/C
MAZAK VC NEXUS 510-C-II
courtesy. year 2010
Mazatrol matrix control
movements:
X: 1,050 mm
Y: 530 mm
Z: 510 mm
Spindle motor 18.5 kW
Max spindle speed 12,000 rpm
ATC 30 tools
SK-40 system
coolant through spindle, 15 bar
tool length measuring preparation Renishaw infrared system
swarf conveyor
CE-mark
2010
Price  
    request
125755919 103

Lot of Horizontal Milling Spindles


Weight approx.: 60 kgDimensions (l x w x h) approx.: 1000 x 400 x 400 mmDescription: Lot of Horizontal Milling Spindles - approx. 17 pieces - different sizes and versions - for further information see photos

 
Weight approx.: 60 kg
Dimensions (l x w x h) approx.: 1000 x 400 x 400 mm
Description: Lot of Horizontal Milling Spindles
- approx. 17 pieces
- different sizes and versions
- for further information see photos
 
used machinery auction RESALE 100 €  
  DE   request
125726366 101

MAZAK VC NEXUS 510-C for sale
Vertical Numerically Controlled Machining Centres


1 CNC vertical machining center MAZAK VC NEXUS 510 C Built in 2007 Mazatrol matrix control Procedures: X: 1,050 mm Y: 530 mm Z: 510 mm Spindle motor 18.5 kW maximum speed 12,000 rpm Automatic tool changer with  ...

 
1 CNC vertical machining center
MAZAK VC NEXUS 510 C
Built in 2007
Mazatrol matrix control
Procedures:
X: 1,050 mm
Y: 530 mm
Z: 510 mm
Spindle motor 18.5 kW
maximum speed 12,000 rpm
Automatic tool changer with 30 tool stations
SK-40 tool system
Cooling by means of the spindle, 15 bar
Tool length measurement preparation Renishaw infrared measurement system
Chip conveyor
CE mark
 
Price  
    request
125756179 205

WEEKE BP 100 for sale
CNC Machining Center


serial number: 0-250-05-2150 Weight approx.: 4000 kgcontrol: Homatic IPC Dimensions (l x w x h) approx.: 6230x3600x2200 mmsetting measure approx (l x w x h): 6230x3600x2200 mmpacking measure approx (l x w x h): 7000x2400 ...
used machine
 
serial number: 0-250-05-2150
Weight approx.: 4000 kg
control: Homatic IPC
Dimensions (l x w x h) approx.: 6230x3600x2200 mm
setting measure approx (l x w x h): 6230x3600x2200 mm
packing measure approx (l x w x h): 7000x2400x2400 mm
software: WoodWop 4.5
working length x-axis: 2800 mm
drilling head vertical x-axis: 8 piece
drilling head vertical y-axis: 7 piece
drilling head horizontal x-axis: 2 piece
drilling head horizontal y-axis: 2 piece
travelling way X-axis: ca 3200 mm
travelling way Y-axis: ca 1480 mm
travelling way Z-axis: ca 260 mm
Description:

WEEKE BP 100 CNC Machining Center

  • Grooving saw x-axis
  • 2 pcs. milling spindles left / right
  • 4 pcs. horizontal drills
  • 15pcs. vertical drills
  • per console a lifting device
  • without tools
1997
used machinery auction RESALE 3,600 €  
  DE   request
125726356 102

NAKAMURA WTS-150 for sale
CNC Turning Centers


CNC turning Center NAKAMURA WTS-150 Built in 2001 FANUC 16i-T control Procedures: X 1 / X 2 / X 3-207,5 mm Z1/Z2 (top turret) - 300 mm Z3 (lower turret) - 800 mm Y1/Y2 - 60 mm B (counter spindle) - 875 mm Maxim ...
used machine
 
CNC turning Center
NAKAMURA WTS-150
Built in 2001
FANUC 16i-T control
Procedures:
X 1 / X 2 / X 3-207,5 mm
Z1/Z2 (top turret) - 300 mm
Z3 (lower turret) - 800 mm
Y1/Y2 - 60 mm
B (counter spindle) - 875 mm
Maximum turning diameter 300 mm
H turning diameter 200 mm
Maximum turning length of upper turret left &amp; right 275 mm
Maximum turning length of lower turret 775 mm
Distance between the spindle nose 1.070 mm
Distance between 2 Collet Chuck 850 mm
Main spindle 15/11 kW, max. speed 5,000 rpm
Main spindle maximum passage of bar 52 mm
Counter spindle 15/11 kW, max. speed 6,000 rpm
3 x 12 station tool turret
3 x 12-driven tool stations, AC 3,7 kW
Maximum speed driven tools 6,000 rpm
Grab G for precast discharge, including internal part conveyor
Bar loader FMB Turbo 5-42, up to 3 m length
Hainbuch clamping chuck BZI 42 for main and sub spindle
High pressure coolant system with paper band filter
Nordmann tool breakage detection
Fire extinguishing, brand strength &amp; Bauer
CE mark
2001
Price  
    request
125755933 103

FOREST LINE 5-ACHSEN Seramill 240 for sale
FOREST LINE 5-Axis Portal milling machine


Weight approx.: 30000 kgDimensions (l x w x h) approx.: 0x0x0 mmDescription: Year of construction: ca. 1987, control: Siemens 840 D, speed: 2.500 rpm., movement X/Y/Z: 4.000 (+2.000 mm)/2.500/950 mm, passage between stan ...

 
Weight approx.: 30000 kg
Dimensions (l x w x h) approx.: 0x0x0 mm
Description: Year of construction: ca. 1987, control: Siemens 840 D, speed: 2.500 rpm., movement X/Y/Z: 4.000 (+2.000 mm)/2.500/950 mm, passage between stand: 2.400 mm, height under spindle: 1.000 mm, usable bed area: 2.115 x 4.000 mm, table loading (max.): 4.000 kg, Number of T-notches: 11 pieces, rapid traverse in X/Y/Z-Achse: 10 m/min, technology spindle: Birotativer Spindelkopf (A- und C-Axis), speed: 2.500 rpm, taper: SK50, section of the slider: 320 x 340 mm, tool magazine: 45-fold Position sensor: Direct scales in X/Y/Z Setup operation: Electronic handwheel, Dimensions as shown in the pictures, ATTENTION: Noise generation when starting the spindle ATTENTION: Verkauf ab Standort!
 
used machinery auction RESALE 3,500 €  
  DE   request
125726352 102

PETERMANN 10 HS for sale
Longitudinal Turning Machines (Lathes)


Automatic lathe Manufacturer: PETERMANN type: 10 HS Maximum diameter of the material can be edited for the machine 12.70 mm Maximum length of turning with advance Doll by cam Bell: with a run 80 mm with adjust ...
used machine
 
Automatic lathe

Manufacturer: PETERMANN type: 10 HS

Maximum diameter of the material can be edited for the machine 12.70 mm

Maximum length of turning with advance Doll by cam Bell:
with a run 80 mm
with adjustable run 80 mm
with rotating barrel for approximately 60 mm
for 70 mm form material

Maximum length of turning with progress Doll by cam plate:
with a barrel of 50 mm
adjustable bore 50 mm
with rotating barrel 40 mm

Maximum thread diameter with automatic thread
Steel not 1.25 mm 8 mm
Brass not 1.50 mm and 10 mm

Minimum number of pins in the doll 12
Maximum spindle speed of the doll (revolutions per minute) 6260
Minimum spindle speed of the doll (revolutions per minute) 1965

Number of minimum and maximum revolutions of the cam shaft (turns / min) 0.4-63

Number of engine revolutions per minute 1415
Power cv. 3

Dimensions 1800 x 800 mm

Net weight of machine with accessories and motor 1000 kg

The machine packs 1200 kg (with motor)

The machine is fully operational.

Contact person Mr. Mueller see also our over 200 more deals at.

(Changes and errors in the technical data, information
and prices and subject to prior sale!)
 
Price  
    request
125755936 101

DIXI 75 FE for sale
Jig boring machine


Weight approx.: 10500 kgDimensions (l x w x h) approx.: 3350 x 2800 x 2800 mmDescription: Control System: Siemens 840 D, Movement X,Y,Z [mm] 760/760/760 mm, Spindle speed: 1.600 rpm, taper: SK50, clamping surface: 1.000  ...
used machine
 
Weight approx.: 10500 kg
Dimensions (l x w x h) approx.: 3350 x 2800 x 2800 mm
Description: Control System: Siemens 840 D, Movement X,Y,Z [mm] 760/760/760 mm, Spindle speed: 1.600 rpm, taper: SK50, clamping surface: 1.000 x 810 mm, table loading (max.): 1.200 kg, Incl. Equipment as shown in the pictures
1971
used machinery auction RESALE 5,900 €  
  DE   request
125726350 102

NAKAMURA WT 300MMY for sale
CNC Turning/Milling Cenrtre


Reference No.: 17219 1 CNC turning-milling center NAKAMURA model WT-300 MMY Year 2011 / 2012 start-up FANUC 31i-B control Procedures: X 1 / X 2: 195 mm / 195 mm Z1/Z2/B: 780 mm / 780 mm / 850 mm Y1 (top gun): ...

 

Reference No.: 17219

1 CNC turning-milling center
NAKAMURA model WT-300 MMY
Year 2011 / 2012 start-up
FANUC 31i-B control
Procedures:
X 1 / X 2: 195 mm / 195 mm
Z1/Z2/B: 780 mm / 780 mm / 850 mm
Y1 (top gun): 120 mm max. turning diameter 270 mm
Distance between Spindle noses 1,100 mm
Stronger spindle motor left spindle AC22 kW
Maximum main spindle speed 4,000 rpm
Increased spindle bar passage left, 71 mm
Main spindle spindle nose A8
Stronger spindle motor right spindle AC18, 5 kW
Maximum speed spindle 4,500 rpm
Forage blower right spindle
Air and coolant blowing right spindle
2 x 12 x turret, 24 stations index
2 x 12 driven tool stations, 5.5 kW maximum speed 3,600 rpm
Reinforced Z axis motor of lower turret
Part catcher type A
Precast gripper type G
2 x 15 bar pump
Chip conveyor
5-free M-codes
Polygon rotation function
Oriented down rolling milling 2:1 for upper turret
Helical interpolation
Clamping pressure control
NT-nurse 2
NT-work naviagtor
G52-59
Polar coordinate interpolation
NC option Kit:
-Tray on the control panel
-Cooling medium-sized monitoring
-Spindle speed potentiometer
-Positioning Memory button
Bar loader Irco Breuning SiMag 70.1-3000
-Maximum length 3,000 mm
-Maximum bar diameter 70 mm
-Including various channels
Various tool holders, including 10 driven tools
1 x 3 - jaw Chuck SMW car block HFK-N-260-72
1 x 3 - jaw Chuck SMW car block HFK-N-165-46
Machine weight 14,000 kG
CE mark

On-time: approx. 16,000 hours
Running time: approx. 6,400 hours
 
Price  
    request
125755939 101

SIP Hydroptic-6A for sale
Jig boring machine


Weight approx.: 11500 kgDimensions (l x w x h) approx.: 3300 x 2350 x 2800 mmDescription: Clamping surface: 1.100 x 842 mm, Table loading (max.): 1.000 kg, drilling spindle stroke: 300 mm, drilling spindle-ø: 135 mm, Ta ...
used machine
 
Weight approx.: 11500 kg
Dimensions (l x w x h) approx.: 3300 x 2350 x 2800 mm
Description: Clamping surface: 1.100 x 842 mm, Table loading (max.): 1.000 kg, drilling spindle stroke: 300 mm, drilling spindle-ø: 135 mm, Taper: MK4 further technical data as shown in the PDF Incl. Equipment as shown in the pictures
1968
used machinery auction RESALE 2,900 €  
  DE   request
125726336 102

OERLIKON DM0 for sale
Turning Machines (Lathes)


Lathe manufacturer: Oerlikon Type: DM0 Tip height: 230 mm Top wide: 1500 mm Spindle bore: 45 mm Machine is fully functional. Contact person Mr. Mueller see also our over 200 more deals at. (Changes and err ...
used machine
 
Lathe manufacturer: Oerlikon
Type: DM0

Tip height: 230 mm
Top wide: 1500 mm
Spindle bore: 45 mm

Machine is fully functional.

Contact person Mr. Mueller see also our over 200 more deals at.

(Changes and errors in the technical data, information
and prices and subject to prior sale!)
 
Price  
    request
125755684 104

ELB SWH 4ND for sale
Surface Grinder


Weight approx.: 1900 kgDimensions (l x w x h) approx.: 1800 x 1500 x 2400 mmDescription: Grinding length: 450 mm, grinding width: 250 mm, workpiece height: 375 mm, transverse travel: 230 mm, grinding wheel speed: 1400/28 ...
used machine
 
Weight approx.: 1900 kg
Dimensions (l x w x h) approx.: 1800 x 1500 x 2400 mm
Description: Grinding length: 450 mm, grinding width: 250 mm, workpiece height: 375 mm, transverse travel: 230 mm, grinding wheel speed: 1400/2800 rpm, Grinding spindle drive: 3.7 / 4.5 kW, grinding wheel diameter: 300 mm, grinding wheel width: 50 mm. The machine is equipped with magnetic chuck 400 x 200 mm, Puller on the grinding head and coolant device.
1988
used machinery auction RESALE 2,800 €  
  DE   request
125726331 102  

MAZAK Integrex 300-IV x 1500 U for sale
CNC Turning/Milling Cenrtre


1 CNC turning and milling center Mazak Integrex 300-IV x model 1500 U built in 2007 Mazatrol matrix control Max turning diameter 760 mm maximum turning length 1,524 mm spindle motor spindle 30 kW maximum main spindle sp ...
used machine
 
1 CNC turning and milling center Mazak Integrex 300-IV x model 1500 U built in 2007
Mazatrol matrix control Max turning diameter 760 mm maximum turning length 1,524 mm spindle motor spindle 30 kW maximum main spindle speed 4,000 rpm C-axis, 0.0001 °
3 - jaw Chuck
Y-axis, 230 mm
Spindle motor spindle 18.5 kW max speed milling spindle B-axis, 0.0001 ° 12,000/rpm
Tool changer with 40 stations
Capto C6 tooling
NC-controlled tailstock, integrated revolving tailstock MK5 Tooleye
Laser tool rupture control, Renishaw NC4
Niagara cooling and flushing system
70 bar high-pressure cooling, 7 levels of cooling through the milling spindle
Hydraulic Temeperaturregelung
Chip conveyor overload detection
8MB memory
4 additional M-codes
CNC option package N performance
-synchr. Mill/TAPP
-3D coordinate
-shape comp. for Red axis
-cylindriacl interpolation G07, 1
-polar coordinate G12
Weight 12,200 kg CE mark
2007
Price  
    request
125756197 103

CORREA F2UE for sale
CNC universal miller


Weight approx.: 2100 kgDimensions (l x w x h) approx.: 2200 x 2200 x 2300 mmDescription: Table surface 1200x305 mm. Automatic longitudinal travel 950 mm. Automatic transversal travel 260 mm. Automatic vertical travel 475 ...

 
Weight approx.: 2100 kg
Dimensions (l x w x h) approx.: 2200 x 2200 x 2300 mm
Description: Table surface 1200x305 mm. Automatic longitudinal travel 950 mm. Automatic transversal travel 260 mm. Automatic vertical travel 475 mm. Spindle ISO 40. CNC HEIDENHAIN TNC-135. Serial Nº 5104849. Internal reference 403.302
 
Price  
  ES   request
125726325 101

MORI SEIKI M-300L/3000 for sale
Numerically Controlled Machining Centres


A CNC machining center of manufacturer Mori Seiki is available here. The machine is in good condition and can be visited like to by appointment only in our warehouse under power and tested. The spindle was replaced abo ...
used machine
 
A CNC machining center of manufacturer Mori Seiki is available here.
The machine is in good condition and can be visited like to by appointment only in our warehouse under power and tested. The spindle was replaced about 2 years ago.
Free loading truck

Technical data:
Make: Mori Seiki
Type: M-300 L/3000
Control: Fanuc Series 16/18 MF-M6
Year of constr.: OSTEO. 1994

Traverse path x/Y/Z: 3000/500/500 mm
Clamping surface: 3400 x 540 mm
Toolholder: BT 40
Number of tool stations - tool changer: 30
Dimensions: 5000 x 3000 x 2800 mm
Weight: 13000 kg

Leasing/financing available. Please enquire.

Orginalfoto
Price Excl. VAT
Free loading truck
Please note that the photos are part of the auction
Sales invoice
For more details see pictures or manufacturer page
Visit and pick up at any time
All details are information about
It used no guarantee or warranty.
Delivery possible. Please enquire
Errors and omissions as well as subject to prior sale.
1994
Price  
    request
125756464 103

AVIA FNC 25 D 3 for sale
Universal Tool Milling Machine


Weight approx.: 1200 kgDimensions (l x w x h) approx.: 1500 x 1300 x 2000 mmDescription: - machine no.: 4417 - with HEIDENHAIN 3-axis digital read out - counter holder for horizontal milling spindle - travel X: 400/240 m ...
used machine
 
Weight approx.: 1200 kg
Dimensions (l x w x h) approx.: 1500 x 1300 x 2000 mm
Description: - machine no.: 4417
- with HEIDENHAIN 3-axis digital read out
- counter holder for horizontal milling spindle
- travel X: 400/240 mm
- travel Y: 200 mm
- travel Z: 310/330 mm
- spindle holder: SK 40
- 16 spindle speeds: 56 - 1800 rpm
- vertical clamping surface: 826 x 250 mm
- table size: 280 x 750 mm
- 16 automatic feeds: 11,2 - 355 mm/min
- drive power: 2,2 kW
- for further information see photos
1980
used machinery auction RESALE 2,900 €  
  DE   request
<  page 15  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
More models (2 or more machines):
(3)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold
Find used machinery dealers in your country