speedmaster 52 used for sale

Folding machine MB multipli-cas 524 Serial-No. 78261 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

Schneidmaschine / Gullotine Ideal 5221-95 EC Baujahr / Year 2001 - Serial-No. 1981934 Schnittbreite / Cutting width max. 520mm Programm Ersatzmesser / Spare Knife Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

-Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-

Schneidmaschine wie Neu / Gullotine like New Ideal 5255 EASY-CUT Baujahr / Year 2019 - Serial-No. 1429278 Schnittbreite / Cutting width max. 520mm Einsatzhoehe / staple high max. 80mm Einlegetiefe / Infeed deep max. 520mm Restschnitt / minimum Cutting size 35mm Masse / Dimensions  B860 x T1120 x H1293mm Gewicht / Weight 261kg Ersatzmesser / Spare Knife Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

power capacity: 3 kW feed pressure: 10 bar liter capacity: 420 l7min intake capacity: 520 l/min 0: 270 l turning speeds: 800 U/min sound - pressure - turn off level ca. max.: 71 dB total power requirement: 3 / 0,35 kW weight of the machine ca.: 170 kg dimensions of the machine ca.: 1,6 x 0,5 x 1 m Electric 400 Volt: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pneumatic feeder with 2 air suction units Thermal oil sealed heating roller Cutting unit Sheets size : 530x750 – 220x220 mm Sheet weights : 130-350 g/m² Speed : 25 m/m (3700 sheets SRA3/hour – 1800 sheets B2/hour)

Shredder for green waste, roots, waste wood, reed wood, organic waste, biomass, bark, etc. Equipment: Radio, hydraulic travel drive, overbelt magnet, SPECIAL FEATURE: Both shredding shafts, basket carrier with bio-cutting unit, baskets, tools, large service renewed before 100 hours of operation original Komptech.

3.0 carrying capacity 150kg weight Suitable for Euro recording

3.0 carrying capacity 150kg weight Suitable for Euro recording

Welding fume extraction for wall mounting NEDERMANN Extraction system, Extraction fan, Articulated extraction arm Year of manufacture: 1997 Centrifugal fan series: 521 Art. No: 510521 Extraction arm series: 535 Art. Ref: 522535 Flow rate approx. 1000 m3/h Suction hose 160 mm Suction funnel 250 x 300 mm Air outlet 160 mm Extraction arm length approx. 3 metres Motor power 0.37 kW Mains connection 400 volts, 50 Hz. • Centrifugal fan with rotating arm • Extraction arm with 3 joints •Suction funnel with shutter • Bracket for wall mounting Weight 35 kg Other welding fume extractors under stock number: 60890, 61327, 61328; used

General SKU235U235 LocationBarneveld MakeIlchmann TypeDTSF 2x200x6.525 Mach.No.CRO 0348 Main Features Motor3 KW Length6525 mm Inlet diameter350 mm Specified Features - Horizontal screw conveyor MaterialStainless steel 1.4571 (316Ti) Horizontal conveyor screwcheck Trough-typecheck Double shaftcheck Diameter200 mm (2x) Length6525 mm Between inlet and outlet5880 mm Shaft diameter108 mm (x) Pitch200 mm Inlet630x350 mm Outlet350x350 mm Max. temperature90 °C With adjustable packing glandscheck Motor3 kW, 220-230 volt / 380-400 volt, 1456 rpm Screw speed31 rpm With coverscheck Information Year of construction2014 Total height0,49 m CEcheck Floorspace8,3x5,1 m Weight1250 kg Extra SpecificationsCapacity: max. 5 m³/hHorizontal screw conveyorsIlchmannConveying systems > Horizontal screw conveyorsBrand > Ilchmann What you can expect from Foeth: -- Machine is in wo ...

Screw diameter: 40 mm Calculated injection volume: 217 cm³ Length/diameter ratio: 23 L/D Pressure on the material: 2377 bars Nb Temperature zones: 5 N CLOSING UNIT Closing force: 1500 kN GENERAL Heating power: 13 kW Total installed power: 22 kW Oil quantity: 345 l. Dimension: (WxHxD) 4.47 x 2.19 x 1.51 m. Weight: 6400 Kg

Control Type: MC4 Number of hours: 37,121 H Closing force: 110 T Opening stroke: 600 mm Between columns: 470 x 470 mm Tray dimensions: 745 x 770 mm Mini/maxi mould: 300 mm Max gap between trays: 900 mm Injection: Screw diameter: 45 mm Screw length: 20 D cm3: 275 Bars: 1878 General: Motor power: 18.5KW Heating power: 13KW Closing weight: 6T Options: Cores: 2 Robot interface: YES Bi metal: YES Others: accumulators

heavy-duty thickness planer SCM S 520 Planing width 520 mm Planing height max. 250 mm Chip removal 3 - 8 mm Ribbed Steel Feed Roller Rubber pull-out roller 4-knife planer shaft, diameter 120 mm motorized height adjustment l mech. DIGITAL Feed rate 5 - 8 - 12 - 18 m/min. Machine is WORKSHOP OVERHAULED IN TOP CONDITION

- Exhibition machine - TERSA planing shaft, electric height adjustment, digital display for planing thickness ---------- Technical data ---------- planing width: 520 mm, thickness table dimensions: 850 x 520 mm, table length: 2,250 mm, max. chip removal: 5 mm, planing shaft: 120 mm, number of knives: 4 pieces, clearance height: 240 mm, min. workpiece thickness: 3 mm, feed speed: 5 / 8 / 12 / 18 m/min., speed: 5,000 rpm, suction nozzle: 120 mm, Motor power 400 V: 9.5 hp / 7.0 kW, weight: 695 kg new exhibition machine

Key data: 1500 kN, 141 g/PS, 35 mm

Arburg 520S-1500-400 (217) General information SKU: (217) Availability: In stock Year of construction: 2008 Brand: Arburg Specifications Spray weight: 141 g Clamping force: 1,500 kN Screw diameter: 35 mm Spray pressure: 2000 bar Tie bar spacing: 520 x 520 mm Clamping plate size: 688 x 688 mm Tool installation height min.: 250 mm Control: Selogica Language: English,German Power: 33.9 kW Hours: 45343 h Weight: 6490 kg Dimensions: 4.9 x 1.7 m Funnel: No Core Train: Yes Euromap: Yes Air Valve: Yes Heating cans: Yes C90fn8e

Description: With water bath Internal dimensions: 600 x 450 mm With 4 drawers Approx. Onsite Dimension. (l x w x h): 700 x 600 x 800 mm, weight approx.: 150 kg

Closing unit Clamping force [kN] 2000 Dimensions of mounting plates (hxv) [mm] 715 x 715 Clearance between columns (hxv) [mm] 520 min./ max. mold height [mm] 250 / 500 injection unit Screw diameter [mm] 55 Injection weight [g] 310 Injection pressure [bar] 1720 Dimensions and weight Net weight with control cabinet [t] 6.63 Dimensions (L x W x H) [m] 6.00 x 1.50 x 2.40

Closing unit Clamping force [kN] 1250 Dimensions of mounting plates (hxv) [mm] 805 x 770 Clearance between columns (hxv) [mm] 530 x 470 Min./max. mold height [mm] min. 300mm Injection unit Screw diameter [mm] 45 Injection volume [cm3] 275 Injection weight [g] 250 Injection pressure [bar] 1878 Dimensions and weight Net weight with control cabinet [t] 7.69 Dimensions (length x width x height) [m] 4.48 x 1.5 x 2.2

Clamping force [kN] 1000 Clearance between columns (hxv) [mm] 420 x 370 min./ max. mold height [mm] 230-730 Maximum opening width [mm] 500 injection unit Screw diameter [mm] 40 Injection volume [cm3] 251 Injection weight [g] 250 Electric-hydraulic equipment Rated power of the pump motor [kW] 18.4 Heater power [kW] 18.4 Dimensions and weight Dimensions (L x W x H) [m] 4.3 x 1.5 x 2.0 m

Dimensions and weight Net weight with control cabinet [t] 7.69 Dimensions (length x width x height) [m] 4.48 x 1.5 x 2.2 Closing unit Clamping force [kN] 1250 Dimensions of mounting plates (hxv) [mm] 805 x 770 Clearance between columns (hxv) [mm] 530 x 470 Min./max. mold height [mm] min. 300mm Injection unit Screw diameter [mm] 45 Injection volume [cm3] 275 Injection weight [g] 250 Injection pressure [bar] 1878

Clamping force [kN] 2000 Dimensions of mounting plates (hxv) [mm] 685 x 685 Clearance between columns (hxv) [mm] 520 x 520 injection unit Screw diameter [mm] 45 Injection volume [cm3] 286 Injection weight [g] 240 Injection pressure [bar] 2500 Electric-hydraulic equipment Pump motor rated power [kW] 30 Heater power [kW] 14.9 Dimensions and weight Net weight with control cabinet [t] 6.63 Dimensions (L x W x H) [m] 5.35x1.93x2.20

Battenfeld HM 100/525 Injection molding machine Year: 2006 Control version: B 4 Technical details Closing force: 1000 kN Mold plate size (hxv): 680mm x 594mm Distance between columns: 470 mm x 420 mm Mold opening stroke: 500 mm Mold height min .: 250 mm Maximum ground clearance: 750 mm Hydraulic ejector - stroke: 150 mm Ejector force forward / back: 41.2 kN Injection unit Screw diameter: 40 mm Ls / D ratio: 22 Injection pressure: 2,100 bar Injection volume: 251 cm³ Shot weight, PS: 228.4 g Injection stroke: 200 mm Screw speed: 0 - 318 1 / min Plasticization rate: 30.4 g / sec. Nozzle pressure: 86 kN Electrical and hydraulic equipment Installed heating capacity: 12.1 kW Adjustable barrel heating zones: 1 + 3 Pump power 18.5 kW Oil 275 liters Dimensions and weights Total machine weight: 4.600 kg Dimensions (L x W x H) 4.3 x 1.5 x 2.0 m the machine has a hyd ...

Krauss Maffei KM 110-520 C1 injection molding machine Year of production - 2004 Fully hydraulic locking system. MC4 control system with color monitor, integrated control panel and built-in disk drive Plasticizing system 1 complete plasticizing system for thermoplastics, abrasive version, 45 mm screw diameter, with backlatch and open nozzle TECHNICAL DATA OF THE MACHINE IN STANDARD EXECUTION Closing unit: - Mold closing force: 1100 kN - Mold opening force: 70 kN - Movement force of the movable plate clamping the mold - - - opening: 35 kN - closing: kN 28 - Mounting plate dimensions (h x v): mm 745 x 770 - Clearance between columns (h x v): mm 470 x 470 - Way of opening the mold: mm 600 - Mold development height: mm 300 - Opening width: mm 900 - Ejector stroke: mm 150 - Ejector force: 22/10 kN Injection unit: - Screw diameter: mm 45 - Injection pressure: 1878 bar - In ...

Arburg 520C-1300-350 with bimetallic plasticizing system Shot weight: 194 g Closing force: 1,300 kN Screw diameter: 45 mm Injection pressure: 1670 bar Column spacing: 520x520 mm The size of the plates: 715x715 mm Mold height min: 250 mm Type of control: Selogica German Installed power: 32.2 kW Working hours: 95 616 h Weight: 6380 kg Dimensions: 5.1x1.9 m Hopper: No. Core sequence: Yes Robot Socket: Yes

Arburg 520C-2000-675 Shot weight: 240 g Closing force: 2,000 kN Screw diameter: 45 mm Injection pressure: 2500 bar Column spacing: 520 x 520 mm Plate size: 715 x 715 mm Mold height min: 250 mm Type of control: Selogica German Installed power: 44.9 kW Working hours: 126,766 h Weight: 6630 kg Dimensions: 5.6 x 1.7 m Robot nest Air valve

Injection weight: 487 g Closing force: 1,500 kN State: Used Screw diameter: 60 Injection pressure: 1390 Column spacing: 520x520 Size of plates: 700 x 700 Control type: Selogica Installed power: 74 Working hours: 63,600 Libra: 7300 Dimensions: 6 m x 2.4 m Feed hopper: NO

Injection Weight: 434g Closing force: 2,000 kN Screw diameter: 55 mm Injection pressure: 1650 bar Column spacing: 520x520 mm Board size: 728x728 mm Min mold height: 250 mm Type of control: Selogica German Installed power: 44.9 kW Working hours: 80000h Weight: 7300 kg Dimensions: 6x2 m Hopper: No Core String: Yes Robot nest: Yes with conveyor belt, ticketing snail

Krauss Maffei KM 150-520 C2 with the LR 100 robot Clamping force [kN] 1500 Dimensions of mounting plates (hxv) [mm] 780 x 790 Clearance between columns (hxv) [mm] 500 x 500 Maximum opening width [mm] 900 injection unit Screw diameter [mm] 45 Injection volume [cm3] 275 Injection weight [g] 250 Injection pressure [bar] 1878 Electric-hydraulic equipment Pump motor rated power [kW] 30 Heater power [kW] 16 Dimensions and weight Net weight with control cabinet [t] 7.1 Dimensions (L x W x H) [m] 4.66 x 1.51 x 2.19

Clamping force [kN] 1100 Dimensions of mounting plates (hxv) [mm] 745 x 770 Clearance between columns (hxv) [mm] 470 x 470 min./ max. mold height [mm] min 300 Maximum opening width [mm] 900 Injection unit Screw diameter [mm] 45 Injection volume [cm3] 275 Injection weight [g] 250 Injection pressure [bar] 1878 Electric-hydraulic equipment Rated power of the pump motor [kW] 18.5 Heater power [kW] 13 Dimensions and weight Net weight with control cabinet [t] 6 Dimensions (length x width x height) [m] 4.48 x 1.51 x 2.19

Closing unit Clamping force [kN] 2000 Dimensions of mounting plates (hxv) [mm] 685 x 685 Clearance between columns (hxv) [mm] 520 x 520 Injection unit Screw diameter [mm] 50 Injection volume [cm3] 353 Injection weight [g] 297 Injection pressure [bar] 2080 Electrical and hydraulic equipment Rated power of the pump motor [kW] 30 Heater power [kW] 14.9 Dimensions and weight Net weight with control cabinet [t] 6.63 Dimensions (length x width x height) [m] 5.35x1.93x2.20

Closing unit Clamping force [kN] 1100 Dimensions of mounting plates (hxv) [mm] 745 x 770 Clearance between columns (hxv) [mm] 470 x 470 Min./max. mold height [mm] min 300 Maximum opening width [mm] 900 Injection unit Screw diameter [mm] 45 Injection volume [cm3] 275 Injection weight [g] 250 Injection pressure [bar] 1878 Electrical and hydraulic equipment Rated power of the pump motor [kW] 18.5 Heater power [kW] 13 Dimensions and weight Net weight with control cabinet [t] 6 Dimensions (length x width x height) [m] 4.48 x 1.51 x 2.19 Additional equipment: Single-phase plastic feeder Picker

Important Note: The following description provides additional technical details about the Battenfeld TM 1300/525 M Injection Molding Machine beyond the core offer. This information is intended to assist buyers in making an informed decision. Core Offer: For professionals seeking a reliable injection molding machine, the Battenfeld TM 1300/525 M offers exceptional performance. Its specifications include: Clamping Force: 1300 kN Mounting Plate Dimensions (hxv): 670 x 670 mm Clearance Between Columns (hxv): 470 x 470 mm Min./Max. Mold Height: 225-500 mm Maximum Opening Width: 930 mm Injection Unit: Screw Diameter: 40 mm Injection Volume: 251 ccm Injection Weight: 228 g Injection Pressure: 2100 bar Electrical and Hydraulic Equipment: Rated Power of the Pump Motor: 18.5 kW Heater Power: 12.1 kW Dimensions (L x W x H): 4.9m x 1.33m x 2m Net Weight with Control Cabinet: 4.8 ...

Features of the machine: 1. 4 compartment sealing for better stability of the bags 2. date stamp 3. valve applicator 4. 2 different moulding tools (e.g. for 250g and 1000g content) 5. conveyor belt loading 6. unloading conveyor belt 7. 4 head linear weigher 8. electronics from Schneider The machine is assembled and can be tested and demonstrated. Specifications: Voltage: 220V / 3Ph (380V) Film type: OPP/CPP OPP/CE MST/PE PET/PE Film thickness: 0.04 - 0.08 mm Film width: 140 - 520 mm Diameter Film roll: 320 mm outer and 75 mm inner Max. Bag Size: 80-160 mm (Front), 40-80 mm (Side), 80-400 mm (Length) Speed: 5-40 Bpm Weight: 750 kg Power: 7KW Horiz. Jaw heater: 4400W 220V Vert. jaw heater: 4600W 220V Air pressure: 0,65MPa Consumption: 0,6m³ / min Dimension: L 1400 x W1800 x H2020 Dismantling and transport must be organised by the buyer. It is 3 years old, h ...

Producer DEMAG Type Demag IntElect 150/520-310 NC4 All electric Year 2005 Clamping unit Clamping force 150 ton Opening stroke 850 mm Distance between tie bars 520 X 520 mm Mould height min. 275 mm Injection unit Screw diameter 30 mm Injection volume 64 cm³ Shot weight 58 g Injection pressure 2500 bar Measurements and weight Dimensions 5,35 X 1,48 X 2,28 m Machine weight 6400 kg

Producer Arburg Type 520 C 2000 - 800 Year 2005 Clamping unit Clamping force 200 ton Opening stroke 650 mm Distance between tie bars 520 x 520 mm Mould height min. 250 mm Opening width 900 mm Platen size (h x v) 728 x728 mm Injection unit Screw diameter 55 mm Injection volume 474 cm³ Shot weight 434 g Injection pressure 1650 bar Measurements and weight Dimensions 5.45 x 1.8 x 2.1 m Machine weight 7150 kg

Producer Arburg Type 520 C 2000 - 800 Year 2008 Clamping unit Clamping force 200 ton Opening stroke 650 mm Distance between tie bars 520 x520 mm Mould height min. 250 mm Opening width 900 mm Platen size (h x v) 728 x 728 mm Injection unit Screw diameter 55 mm Injection volume 474 cm³ Shot weight 434 g Injection pressure 1650 bar Measurements and weight Dimensions 5.45 x 1.8 x 2.1 m Machine weight 7150 kg

Engine Brand: VOLVO, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Working Hours: 1572653 Hour(s), Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 447 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 520 , Generator Hz: 50 , Generator Volts: 400 , Generator Amps: 650 , Generator Fases: 3 Fases , , https://www.hamofa.com/catalog/product/view/id/226672, , = More information =, , Type: Engine, Type number: TAD1630G GENERATOR 520KVA

Injection weight: 141 g Closing force: 1,500 kN Screw diameter: 35 Injection pressure: 2000 Column spacing: 520x520 Size of plates: 688x688 Min mold height: 250 Control type: Selogica Tongue: English German Installed power: 33.9 Working hours: 45343 Libra: 6490 Dimensions: 4.9 x 1.7 Feed hopper: NO Core String: Yes Robot socket: Yes Air valve: Yes Heating control for molds: Yes

Key data: 52 mm, 500 mm, 5000 1/min

Condition of the machine: The machine is currently still in production and powered by the original owner. The Spinner TC400 is in a very good mechanical condition, running 1 layer with light and small machining. A visit to the supplier directly is still possible for a short time, then at our warehouse. Accessories Machine: - Control SIEMENS 840D sl with SHOP TURN - Tool measurement incl. software - Bar feeder SERVO-LOAD 80/1200 -Conveyor - Driven tools and tool holders (used) - Collet chuck for 185 E collets with hydr. Clamping (Footswitch) - 3-jaw chuck ( m. gebr. Baking) - IKZ - Parts catcher - C-axis 360° - Tailstock MK4 with hydr. Clamping (Footswitch)

Description: machine no.: KMM 526 1213 operating voltage: 400 V frequency: 50 Hz , nominal current: 45 A pre-switching fuse: 3 x 50 A control system: SIEMENS SINUMERIK 840 D working spindle: , spindle bearing ,diameter: 70 mm , tool holder: SK 40 , Max. torque value: 45 Nm , spindle speed: 36 – 10500 rpm tool magazine: , number of tools: 42-fold tool clamping: 8000 N , Max. tool diametre: 125 mm , Max. tool length: 250 mm , feed rate: X-axis: 10000 mm/min , Y-axis: max. 10000 mm/min , Z-axis: max. 10000 mm/min , rapid traverse: , X-axis: 60 m/min , Y-axis: 60 m/min , Z-axis: 60 m/min , Max. feed force: , X-axis: 4000 N Y-axis: 4000 N , Z-axis: 8000 N , chiping values: , Max. milling performance: 460 cm³ , Max. drill diameter: 40 mm , Max. thread diameter: M30&nbs ...

Ryobi 525 GE AGE 2011-52 mio PDS-E- RYOBI Semi-RPC- RYOBI-matic- PCS-J-Technotrans Alpha.d- automatic washers

with remote control with digital scales Kind of: overhead travelling crane Capacity: 2,5 ton + 2,5 ton Span: 18 520 mm

RECON Part Number: 0212 3104 0.199.20.73.01 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

New Part Number: 0206 5542 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

New Part Number: 0291 6480 not reversible ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

pressure: 230 t chamfer lenght: 3230 mm throat: 420 mm stroke of ram: 445 mm column daylight: 2690 mm weight of the machine ca.: 16.500 kg dimensions of the machine ca.: 4995 x 3370 x 3200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

OEM Wartsila 524 TS - Inlet Valve 121101 - 24TS Part number - 121101 Inlet valves are new and unused (Condition - See photos, unused, from a canceled order, stored since 2013). Please kindly note that we also have another Wartsila spare parts on stock. If you are interested we would be pleased to provide you with our stock list.

Key data: 520 mm, 250 mm, 5 kW

Used comb. Dressing / Thickening Manufacturer: SCM Type FS 520 Built in 1998 4-Knife Wersa Shaft Planing width 520 mm Total length of dressing tables 2,300 mm Planing height 250 mm Inclination of the joint fence 90° to -45° Power 5.5 kW With engine brake Slotted table lips Weight 980 kg With pneum. Quick changeover system dressing -> thickness -> dressing Very neat overall condition.! Location: 59425 Unna The machine can be viewed under electricity. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarante ...

Folding machine YOC 2000 1. Folder 4 pockets 2.. Folder 4 pockets good condition