speedmaster 52 used for sale

Straight grinder, straight grinder, belt grinder, internal cylindrical grinder, angle grinder, cut-off grinder -Pneumatic straight grinder -Length: 520 mm -Dimensions: 800/130/H130 mm -Weight: 5.5 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 1050 mm -Piston diameter: 40 mm -Piston rod: 16 mm -Thread mounting: M12 -Total length: 1210 mm -Total length extended: 2260 mm -Number: 2x cylinders available -Price: per piece -Weight: 4.1 kg

Computer, board computer, organizer -Manufacturer: CV90-52689-12 -Type: CV90-52689-12 -Number: 2x organizers available -Price: per piece -Weight: 0.8 kg

Measuring device for air conditioning units, air conditioning systems, cooling units -Type: Testo 523 -with: various hoses -Number: 1x measuring devices with suitcases available -Price: per piece -Dimensions: 490/400/H130 mm -Weight: 5.5 kg

Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer -Width: 525 mm -Length: 585 mm -Plate thickness: 28 mm -Plate: is solid -Groove width: 20 mm -Grooves spacing: 127 mm -Thread: M12 -Weight: 63 kg

Control amplifier, servo motor control -Manufacturer: Indramat -Type: TRM3-W23-E0/523 -Module: TSS8/532 -Number: 1x controls available -Price: per piece -Dimensions: 305/145/H310 mm -Weight: 7.1 kg/piece

Three-phase motor, electric motor -Power: 0.22 kW -Speed: 2880 rpm -Shaft: Ø 12 mm -Construction: B3 -IP protection - -Dimensions: 230/160/H190 mm -Weight: 8 kg

Pneumatic cylinder, air cylinder, standard cylinder -Manufacturer: Westinghouse -Type: 521 295 180 0 -Piston rod: Ø 22 mm -Piston: Ø 80 mm - Stroke: 100mm -Pressure: max. 10 bar -Number: 1x available -Weight: 7.2kg

Gear motor, electric motor -Manufacturer gear Lenze type: 52307 04 111 -Manufacturer Motor Bauknecht Type: RF0,37/4-7 -Speed: 94 rpm -Power: 0.37 kW -Construction: B3 angle -Diameter shaft: Ø 19 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 390/220/H180 mm -Weight: 15 kg

Band sawing machine Kasto HBA 520 AU saw area 350 x 350 mm, table load 7000 kg. Machine immediately available and available. Free truck loading.

Gear, gears, spur gear, spur gear -Manufacturer: PTI, gear, spur gear module 5 18 teeth -Type: M5 Z18 -Shaft holder: I pilot hole Ø 20 mm -Tooth width: 50 mm -Quantity: 2x gear available -Price per piece -Total dimensions: Ø 100 x 75 mm -Weight: 3.0 kg/pc.

Refurbished and Used Cylinder Heads

Folding machine MB multipli-CAS 524 Machine Type: FN

We sell our LAMEC 520, which was in use until recently, with die quick coupler; Drive press: new motor 1x 75kW with 1450rpm + alternatively 1x 110kW with 985rpm for biomass, incl. 2 pcs Pcs conditioners and 2 pcs dosing units frequency controlled; Control with star/triangle combination for 75kW motor, incl. several roller wheels and various dies; built-in die 4x40 for animal feed,

KRAUSS MAFFEI KM 110-520 C1 injection moulding machine was built in Germany in 2003. The machine used in production plants produces top-quality plastic products using the injection moulding method, which involves feeding a plastic material of sufficient plasticity into an injection mould, which is then clamped with a high force of 110 tonnes. To ensure the highest possible operating efficiency and productivity, the machine uses reliable components, such as a powerful screw with a diameter of 45 mm and an ejector with a force of 22 kN. The KRAUSS MAFFEI KM 110/520 C1 injection moulding machine weights 6000 kg. Technical data of the KRAUSS MAFFEI KM 110-520 C1 injection moulding machine - mould clamping force: 110 t (1100 kN) - mould opening force: 7 t (70 kN) - injection volume: 275 cm3 - injection capacity: 159 cm3/s - injection pressure: 1878 bar - injection weight: 250 g - p ...

impressions: - Mio. max. printing speed sheets: 13000 /h max. paper size: 36 x 52 cm serial no.: 1809 dampening system: konventionell The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of heads: 2 serial no.: 2257013 voltage: 220/380 V frequency: 50 Hz current: 2,16 / 1,25 A Electric capacity: 0,55 kw speed: 2800 U/min spindle distance: 80 mm range L-W-H: 120 x 80 x 100 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

impressions: - Mio. max. printing speed sheets: 11000 /h max. paper size: 38,1 x 52 cm serial no.: 52510098 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inert gas welding machine, arc welding system, MIG/MAG welding system -Manufacturer: Ess, inert gas welding machine MIG-MAG 520-2 MW -Type: 520-2MW -Max. Welding power: 500 A -Water cooled -Wire feed case: ESS DVK 17 -Dimensions: 1160/500/H1220 mm -Weight: 379 kg

spindle diameter: . mm x-travel: 2500 mm y-travel: . mm : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Absolute encoder, encoder, encoder, encoder, absolute encoder, absolute encoder, function encoder, resolver, resolver -Manufacturer: Hengstler, rotary encoder with cable and plug -Type: R158-02000EK.42KD 0 522 166 -Voltage: 10-30VDC -Shaft: Ø 10 x 20 mm -Quantity: 1x encoder available -Dimension: 160/70/H80 mm -Weight: 0.4 kg

x-travel: 750 mm y-travel: 1000 mm z-travel: 870 mm Control: 840 D total power requirement: 29 kW weight of the machine ca.: 22,5 t dimensions of the machine ca.: B 3,2 x L 6 x H 3.3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Very good condition sheet metal shear guillotine with little use https://www.baileigh/sheet-metal-shear-sh-5210 This hydraulic shear was one of the machines that got us started and built Baileigh’s quality reputation. With its welded steel frame, the SH-5210 sheet metal shear makes perfect cuts every time. 52” length. 10 gauge mild steel maximum capacity. Minimum capacity of 24 gauge mild steel. 5 hp motor runs on 220-volt single-phase power. Up to 28 strokes per minute. Adjustable 24” backgauge ensures precise repeatability. Front support arms and table guides keep the material square to the blade. 3 modes on the operator console: Inch mode: Jog the control and ease the blade down to the material. Single mode: Make one cut cycle per foot pedal push. Auto mode: Continue cycling as you hold the pedal down. This hydraulic shear comes standard with high ca ...

Injection molding machine by Battenfeld Wittmann. The injection molding machine is from 2018 and has been with us since the news, serviced only in Battenfeld Polska, full history, documentation. The injection molding machine has only 6600 hours of working life. Injection molding machine like new. Upper injection unit - not used, turntable - not used. screw diameter mm 30 specific injection pressure bar 2042 calculated injection volume ccm 106 screw L / D ratio 22 plasticization efficiency g / s PS 12 air injection speed - standard ccm / s 85.7 Cylinder heating system power kW 10.4 SmartPower Rotary Table Table diameter mm 750 Table height mm 140 Table weight kg 1,200 Time of table rotation by 180 ° sec 1.2 Max weight of the mold kg 600 Number of connections 4 x G3 / 8 Max weight of the mold on the turntable kg 1,000 power of the drive system kW 37 oil tank cap ...

Control B4 1. Plasticizing system with a diameter of Ø45mm, mounted in a screw with increased homogenization of the material - with a barrier zone and an additional PMT mixer 2. (03.G04) Plasticizing unit with increased resistance to abrasion and corrosion. Applies to cylinder and worm in standard Battenfeld design (original worm is also delivered as a set). 3. (06.X17) UNILOG B4 HM Europackage consisting of: - 07.D00 setting elements, - 02.K02 air valve controlled as a function of time - 01.C01 hydraulic core control NW 6 on closing plate - 06.R02 2 Schuko 16A sockets mounted on the side wall of the control cabinet. - 06.R20 2 CEE 16A sockets mounted on the side wall of the control cabinet. - 06.B21 robot connection according to Euromap 67 - 06.D10 charging zone temperature set from the level of the control system 4. 06.K40 Quality table 5. 06.K01 Graphic functions of a ...

For sale are 3 Sumitomo Demag IntElect 150/520-410 injection molding machines in good technical condition, complete with hydraulic stations, Witmann Battenfeld W-721 robots (3 axes) and robot work area fences. Stored in a heated room. Unfortunately, there is no way to see the operating time, because... The injection molding machines are not connected to the power supply. Clamping unit 1500. Closing force 1500 kN, holding force 1650 kN, opening stroke max. 495 mm, built-in mold height min/max 275/585 mm, max. the distance between the plates for clamping the mold is 1080 mm, the plates for clamping the molds are 770x770 mm, the clearance between the columns is 520x520 mm, the weight of the mold is max. 1700 kg, which makes the weight of the mold on the movable clamping plate 1150 kg. Ejector. ejector stroke - 125 mm, ejection force 35 kN, ejector return force - 35 kN Injection unit 41 ...

Fully hydraulic closing system, MC 4 control system with color monitor, integrated control panel and built-in disc drive. 1 complete plasticizing system for thermoplastics with a screw diameter of 45 mm - Levels for the foundation of the Nolato machine - Hydraulic blockade of reverse rotation of the auger - Hydraulic auger drive with standard speed - SVO open nozzle in 2-piece design (nozzle body with screw-in nozzle). - A device for sorting good and defective parts. Pneumatic pendulum. Pendulum speed approx. 3 sec. Free-standing device under the machines discharge shaft. Including electrical standard connector and software (Pos. 42.42). - Single pneumatic valve on the movable mold clamping plate for the blowing function (1 piece of 3/2 separating valve with 1 magnetic coil). Control to choose between road/time or time/time. Possibility to manually set the flow using 1 thrott ...

Clamping force: 125 tons Closure system: hydraulic Plate dimensions (H x V): 805x770 mm Dimensions between guide bars (H x V): 530x470 mm Mold min. thickness: 300 mm Screw diameter: 45 mm Injection volume: 275 cm3 Injection weight in PS: 250 g Pressure on material: 1878 bar Length x Width x Height: 4,48 x 1,5 x 2,2 m Weight: 7690 kg Year: 2005 Equipment: Hydraulic ejector Ejector stroke: 150 mm Ejector force: 22,6/9,9 kN Cooling circuits: 6

grinding length: 600 mm grinding width: 230 mm workpiece height: 400 mm table surface area: 600 x 200 mm dimensions of grinding wheel: 250x25x51 mm feed: 1...24 m/min cross feed: 0,02 mm power capacity - grinding motor: 5 kW grinding spindle speeds: 800 - 4200 U/min weight of the machine ca.: ca. 2,3 t dimensions of the machine ca.: ca. 2,8 x 2,5 x 2,0 m Optical condition: good: Mechanic: good: The machine can be viewed under current.: # 2512 Switch-on hours 6273 h Machine is functional, but in delivery condition Accesories: Vogel central lubrication Optidress E device Wet grinding device with belt filter Dressing device Electric sine swivel magnet 400 x 175 mm Operation manual Machine is functionally tested and has an electrical test report! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Flat Pile Feeder, 1st Plant 4 Bags, 2nd Unit CAS 38/2# 96952157 (2 Bags), Shed Delivery, Compressor

Verdichter, Compressor, Copeland Scroll ZR 40 K3E-TFD-522 Displacement: 9.94m3/h 2900 Red/min. Power, Amp.7 Year: New Refrigerant 134a, and others

Welding fume extraction for wall mounting NEDERMANN Extraction system, Extraction fan, Articulated extraction arm Year of manufacture: 1996 Centrifugal fan series: 522 Article number: 510422 Extraction arm series: 535 Article number: 522435 Flow rate approx. 1200 Suction hose 160 mm Suction funnel 250 x 300 mm Air outlet 160 mm Extraction arm length approx. 3 metres Motor power 0.75 kW Mains connection 400 volts, 50 Hz. • Centrifugal fan with rotating arm• Extraction arm with 4 joints • Intake funnel with shutter • Bracket for wall mounting Weight 35 kg Further welding fume extractors under stock number: 61326, 61328; used

Immediately available used injection p. Drive

Immediately available used starting air distributors

plate width: 7000 mm plate depth: 5250 mm plate height: 330 mm weight: ca. 4400 kg Dimensions: Length: 7000 mm Width: 5250 mm Height: 330 mm The panel field comprises six clamping plates with the following dimensions: 1750 mm x 3500 mm The plates are also available individually. Total Area: 36.75 m² T-Slot Specifications: Number of T-slots: 21 T-slot Spacing: T-slot Dimensions: 58 mm x 34 mm T-slot Depth: 60 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Immediately available Elevated main start valve

Key data: 1500 kN, 35 mm

warehouse no.: 503299 manufacturer: ARBURG type: Allrounder 520 S 1500-290 controller: Selogica year of construction: 2018 operation hours: 17400 h clamping force: 1500 kN distance between tie bars h:: 520 mm distance between tie bars v:: 520 mm size of mould plates h: 695 mm size of mould plates v: 695 mm min. mould height: 450 mm max. open daylight: 1025 mm opening stroke: 575 mm screw diameter: 35 mm swept volume: 144 ccm injection pressure: 2000 bar measures of machine lxbxh: 4.42m x 1.61m x 2.2m total weight: 5900KG equipment included: screen text german cascade control unit-interface pneu.6x core pulling hydraulically 2x machine without material hopper mould heating 12x

Parallel Lathe MULLER & PESANT Between points: 2500 mm Maxi Ø on bench: 520 mm Maxi Ø over saddle: 280 mm Maxi diameter in brocken bed: 700 mm Spindle diameter: Ø 56 mm Spindle speed: from 12,5 to 1000 RPM TRIPAN Turret 3-jaws chuck Ø 250 mm Tailstock CM4 Auto feeds longitudinal + transversal Lubricant pump Voltage: 380 V Dimensions (L x W x H): 4000 x 1500 x 1600 mm Weight: approx 3,5 T

Outer 400 mm, mounting cone 196 mm, DIN 55027 size 11 Fmax 9000 daN, nmax 3000 min-¹, bayonenette lock 6 bolts

Immediately available used injection pump

Dimensions & Weight Net weight with control cabinet [t] 7.69 Dimensions (LxWxH) [m] 4.48 x 1.5 x 2.2 Clamping unit Clamping force [kN] 1250 Dimensions of mounting plates (hxv) [mm] 805 x 770 Clearance between columns (hxv) [mm] 530 x 470 Min./ max. mould height [mm] min 300mm Injection Unit Screw diameter [mm] 45 Injection volume [cm3] 275 Injection weight [g] 250 Injection pressure [bar] 1878

Clamping unit Clamping force [kN] 1300 Dimensions of mounting plates (hxv) [mm] 670 x 670 Clearance between columns (hxv) [mm] 470 x 470 Min./ max. mould height [mm] 225-500 Maximum opening width [mm] 930 Injection Unit Screw diameter [mm] 40 Injection volume [cm3] 251ccm Injection weight [g] 228 Injection pressure [bar] 2100 Electrical-hydraulic equipment Pump motor rated power [kW] 18.5 Power of heaters [kW] 12.1 Dimensions & Weight Net weight with control cabinet [t]: 4.8t Dimensions (LxWxH) [m] 4.9x1.33x2

Year: 2011 - technically efficient, ready to work - after full service - for shaped/arched posts

Cycle-controlled lathe GILDEMEISTER NEF 520 With control MANUAL PLUS 4110 Year of construction: 2005 Spindle bore: 70 mm Center width: 1000 mm Circulation O above bed : 500 mm Circulation O over face slide: 290 mm Center height: 250 mm Speed range: 10 – 3050 rpm infinitely variable With the following accessories: Slide protection with interior lighting 8-speed Sauter Revolver VDI 30 30 VDI 30 tool holders 2 driven tools VDI 30 1 collet chuck Coolant system 3 jaw chuck Röhm 0 250 mm 19 set of soft jaw inserts ICP Contour Programming Tailstock with extendable drill quill Chip pan Operating instructions

Size of magnet: 450 x 175mm Dimension of grinding wheel: ?250x25mm grinding flange included Made in Germany Control:SIEMENS 840C Grinding lenght: 600mm Grinding width: 250mm Grinding height: 400mm

turning diameter over bed: 500 mm turning diameter over slide rest: 1150 mm turning length: 1040 mm Control: total power requirement: 12 kW weight of the machine ca.: 3 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DUE TO NEW ENGINE THIS VERY WELL FUTILIZED DEUTZ DRIVE ENGINE FOR SALE

CATALOG NO. 6903 TECHNICAL DATA - max width of the processed element 230mm - max height of the processed element 160mm - number of spindles 5: 1) horizontal bottom 230mm 5.5kW 2) vertical right 160mm 5.5kW 3) vertical left 160mm, electrically adjustable right/left 7.5kW 4) horizontal top 230mm, electrically adjustable up/down 11kW 5) horizontal bottom 230mm 7.5kW - all spindles adjustable up/down, right left - spindle diameter 40mm in advance: - 6 pulling and toothed input rollers, including 2 double rollers 2 pulling, rubber, double output rollers from down: - toothed pulling, metal, swivel input shaft - smooth metal pulling roller - side pressure - pneumatically adjustable rollers - length of the introductory tabletop 1980mm - central lubrication - electric setting of planing thickness - smooth adjustment of feed speed 6-24m/min - feed on cardan shafts - feed m ...

This APV Gaulin MC 45 homogeniser is a 3-cylinder machine which is designed for 20.000 liter per hour with a maximum pressure of 172 bar. The homogensier is equipped with 2-stages with poppet valve cylinder and a MICRO-GAP homogenizing valve assembly which is especially for non-abrasive, low viscosity dairy products. The highly efficient MICRO-GAP valve will enable to operate at up to 40% lower pressure, while giving you the same or better product quality and saves energy and reduction in the machine drive-end loading. Manometer on the inlet and manometer on the stages. Piston diameter: 76 mm. Motor: 90 kW - 380 V - 172 Amp - 50 Hz - 1485 rpm. Oil pumping system inside the machine. Stainless steel cladded. Feetplates available., General application:, High pressure homogenizers are used to break up the fat globules contained in the milk under high pressure and thus distribute them evenly  ...

Specifications: Grinding length: 750 mm Grinding width: 250 mm Grinding headstock/ Drive power: 5 kW Table clamping surface: 720 x 200 mm Grinding height to center spindle: 500 mm Grinding wheel: 225/250 x 25 x 51 mm Max. table load: 100 kg Power supply: 3 phases, 400 V