We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,845 used machines on RESALE, but how to find them? Machine Search
used
used paper sorting system composed of: Feed belt with high side walls, standing on the floor Climbing belt as steep chain conveyor Cross band as webbing to the screening machine Screening machine Trigger tape 1 as webbing for large cardboard Trigger belt 2 as chain belt to sorting belt 1 Trigger belt 3 as belt conveyor Sorting belt 1 Sorting platform 1 with 4 boxes of approx. 3 m width each with stairs and emergency ladder Sorting cabin1 with heating and ventilation system Paper Spike 1600 Sorting belt 2 Sorting platform 2 with 3 boxes of approx. 3 m width each with stairs, flanged to sorting platform 1 Sorting cabin 2 with heating and ventilation system
used
Technical data PaperSpike 2 G: Manufacturer Grumbach und Petermann GmbH Type 2500 Year of construction 2019 Dimensions accelerator belt 3,000 x 2,980 x 600 mm (l x w x h) Weight 1,100 kg Dimensions PaperSpike sorting unit 2,480 x 2,982 x 1,805 mm (l x w x h) Weight 3,100 kg Dimensions PaperSpike 2G complete 5,450 x 3,480 x 1,805 mm (l x w x h) Weight 4,600 kg Dimensions paper discharge conveyor 3,400 x 1,200 x 650 mm (l x w x h) Weight 400 kg Electrical equipment of the entire system: Voltage 380 - 420 V Connected load 9.5 kW Current consumption 20.34 A Operating principle: The material is fed in as dry and thin a layer as possible, preferably a monolayer, evenly over the entire width on the accelerator belt. The sorting roller with the spikes pulls the mixed paper from the chute, while cardboard boxes are impaled and held by the spikes. Material (paper) with low stiffness (newspapers, m ...
used
Number of Bizerba scales: 4 pieces Power ratings: 3 x 400 V/ 50 Hz / 16 A technical documentation: available Availability: as of now composed of: - Sorting belt / separator with two Bizerba ST scales, weight range 0.04 to 6 kg, overall dimensions (L x W x H): approx. 2430 x 1530 x 1250 mm, width approx. 850 mm - simple conveyor belt (height adjustable), total length approx. 3650 mm, total width 510 mm, bandwidth approx. 250 mm - Control cabinet, control panel Siemens OP 73 (Simatic Panel), year of construction 2007 - tray dispenser, machine weight 64 kg, year of construction 2009, connected loads 230 V / 50 Hz, 16 A, overall dimensions (LxWxH): approx. 4750 x 880 x 1035 mm - Control cabinet, type GMS, year of construction 2008, operating pressure max. 8 bar, connected loads 3 x 400 V / 50 Hz / 16 A, control panel Siemens (Simatic Panel) - Sorting belt (height ad ...
used
Multi-purpose gripper, sorting gripper, gripper for weight class 7.5 - 13to unused! Manufacturer Haener Baumaschinen Model HSOG500 Condition Unused, never been in use, year of construction 2022 Weight class 7.5–13t Opening width 1500 mm Height 943 mm Width 600 mm Clamping force 48 kN/bar Net weight approx. 520 kg Operating pressure 300 bar Capacity per litre 40 L/min Stock Special price
used
Multi-purpose grabs, sorting grabs, grabs for weight class 2.5–3.8t unused! Manufacturer Haener Baumaschinen Model HMZG200R Condition Unused, never been in use, year of construction 2022 Weight class 2.5–3.8t Opening width 944 mm Height 601 mm Width 400 mm Clamping force 19 kN/bar Net weight 200 kg Operating pressure 250 bar Capacity per litre 15 L/min Compact Rotator Stock Special price
used
Multi-purpose grabs, sorting grabs, grabs for weight class 3.5–6.5t unused! Manufacturer Haener Baumaschinen Model HMZG300R Condition Unused, never been in use, year of construction 2022 Model HMZG300 Weight class 3.5–6.5t Opening width 1206 mm Height 747 mm Width 505 mm Clamping force 29 kN/bar Net weight 300 kg Operating pressure 300 bar Capacity per litre 25 L/min Rotator Thumm 605 Stock Special price
used
Hedge trimmer for excavator attachment for weight class 1–6to unused! Manufacturer Haener Baumaschinen Model HHE120 Condition Unused, never been in use, year of construction 2022 Weight class 1–6t Width 1.200mm Net weight 48 kg Operating pressure 180 bar Liter capacity 18-21 L/min Stock Special price
used
We offer a used sorter P-FTO.294 of the manufacturer EQUINOX for sale. Brand: EQUINOX Type: Compact sorter for sliding trays Year of construction: 2015 Sorting machine type P-FTO.294 Features: 38 ejects, first induction zone with two induction positions, one ejection Sorting capacity: 4000 trays per hour Dimensions for sorted items: 70/450 x 40/340 x 3/250 mm-H from 0.1 to 2 kg Sorting speed: 0.55 m/s Sorting height: Conveyor belt 14.5 m 16.8 m Dimensions of the sorting compartment: 475 x 466 mm wide Machine location: 89-600 Chojnice/Poland Price on request If you are interested, please contact us: +48601553406 or biuroregalux.pl
used
We offer a used sorter of the manufacturer PROMECH for sale. Description of the product: - 108 sorting units - internal roller conveyor with SEW motors - Emergency stop system - 1 automatic scanning system, 3 manual scanning systems Overall dimensions approx.: 44m x 11m, height 2.85m. Machine location: 89-600 Chojnice/Poland Price on request Machine has been tested and is dismantled, stored dry and ready for shipping. If you are interested, please contact us: +48601553406 or biuroregalux.pl
used
Tilt tray sorter 2x 80 targets – second-hand - : Price on request! Manufacturer: Kosan Crisplant a/s Type: S2000-750 Year of construction: 1993 Sorter: Total length of the entire loop: 168.75m Number of changeovers: 80 Number of erecting units: 2 set Number of linear motors: 7 Number of bowls: 225 Shell pitch: 750mm Shell width: 700mm Speed: 1.5m/s 2 Scanners 160 slides 4 Infiltrations Number of sorter targets: approx. 2 x 2 x 40 targets (sorted to the right and left) Linus based controls Smallest size: approx. A4 x 8cm Maximum size: approx. boxes of 60 x 60 x 80cm Sorting capacity approx. 6 - 10,000 / hour Condition: good Available from. ca. Mid-2024 (possibly earlier on request) Location. Area Berlin More photos, videos and plans on request!
used
Product number: 2566 Marel weigher Type: DWU 2x225 Serial number: A005637 Year of construction: 2001 Belt width: 2 x 225 mm Power: 3 x 400V, 50Hz, 0.25kW Dimensions: 1850 x 1150 x 2050 mm Marel sorting belt Type: G600-460 Serial number: A005611 Stations: 2 x 8 stations Belt width: 600 mm Power: 3 x 400V, 50Hz 0.65kW Dimensions: 6000 x 1800 x 2250 mm
used
TECHNICAL SPECIFICATIONS Manufacturer: DOPPSTADT Designation: Solids separator Design: Semi-mobile, hook lift system Type: GT 130 A Year of construction: 2019 Release medium: water Adjustable incline: up to max. 23° Drive type: Hydraulic Weight: 9,000 kg Transport dimensions (length/width/height): 7,346 x 2,500 x 2,921 mm SPECIFIC COMMENT - Machine for separating mixtures of materials made of buoyant and non-buoyant materials by means of water - Low operating hours - Robust and low-wear design of the machine - Compact transport dimensions as well as easy transport by hook lift truck
used
Automatic inspection machine 100% inspection for the groove, length, hole (ex. Diameter 9,5mm,ID, length 51,5mm Including rotary feeder Manual available Machine is available to see running Video available
used
True color sorter with 2 RGB cameras and 2 NIR cameras, working width 1 chute with 270 mm, for grain 2-5 t/h, sunflower seeds up to 1 t/h, mustard up to 0.7 t/h
used
Guide rails for sorting plant PAGUS 550 x 410 x 95 Inlet: 175 x 50 mm outlet: 5x 55 x 50 mm 2x 60 x 50 mm stainless steel used, checked ! Dimensions: 550 x 410 x 95 mm
used
Gebhardt roller conveyor turnout sorter switch diverter ejector 45° 1900-1800-550 RA1149 TYear of manufacture 2007 perm. weight load: 30 kg/m dead weight: 40 kg/m roll width: 550 mm nominal/external width (NB): 610 / 1800 mm conveying length: 1900mm push-off element: roller adjusted headroom: 680 mm conveying speed: 0,35 m/sec. brake for dust operation on discharge track drive of discharge mechanism: electric dimensions of the conveyed material: l x w = 600 mm x 400 mm Optional: Adjusted height on your request Electrical attachments like light barriers, barcode sensors Control/Software Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: very good (used) Construction year: 2007 Conveying length in mm: 1900 Nominal / outside width in mm: 1800 Roll width in mm: 550 Driven: YES Conveyor speed m / s: 0,35 For individual, profess ...
used
Gebhardt roller conveyor turnout sorter switch diverter ejector 45° 1800-1220-550 RA1148 year of construction 2007 perm. weight load: 30 kg/m dead weight: 40 kg/m roll width: 550 mm nominal/external width (NB): 610 / 1300 mm push-off element: roller adjusted headroom: 680 mm conveying speed: 0,35 m/sec. Brake for dust operation on discharge track drive of discharge mechanism: electric dimensions of the conveyed material: l x w = 600 mm x 400 mm Optional: Adjusted height on your request Electrical attachments like light barriers, barcode sensors Control/Software Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: very good (used) Construction year: 2007 Conveying length in mm: 1800 Nominal / outside width in mm: 1220 Roll width in mm: 550 Driven: YES Conveyor speed m / s: 0,35 For individual, professional advice, simply cont ...
used
HEKOTEK Kombi - Sorting system for sawn timber 28 bins Excellent Condition Hekotek Combi - Sorting Plant Capacity: 40000-50000 m3 sawn material/shift/year (operated in 1 shift) 28 electrically driven sorting bunkers min/max board length 2.1/6.4 m Sorting speed 100 pieces/min Stacking speed 10 layers/min Oven bottom 1.5 x 1.5 x 6.05 m 14 knife trimmers, 30 cm increments, 110 pcs/min (22x100 mm) Hard packages min 650 X 650 mm - max 1600 x 1600 mm Specifications The line starts with a double elevator that destacks the boards Sorting station - automatic dimension sorting and visual sorting of dry material Trimmer with 14 blades in 30 cm increments Sorting bags - 28 electrically driven lowering bags with lifts Chain conveyor under the bags for assorted material Trolleys on rails with chains for transporting the material from the sorting plant to the stacking line Step ...
used
18-fold; Max. Ø 20 mm; Equipped with measuring station with rotating sorting table; supply vibration table; Ø approx. 400 mm; "Siemens" touch panel control and control box; on 3 pallets
used
Output wheat/wheat curd/maize: 2.4/0.45/2.4t/h, motor power: 0.3kW, length: 1950mm, width: 1665mm, height: 1895mm, weight: 500kg.
used
- Non-ferrous eddy current separator type STEINERT - for the sorting of non-ferrous metals such as aluminium or copper - Belt width 1500 mm - incl. control cabinet - Condition outdated -ready for action
used
Max. output: 15t/h, length: 2753mm, width: 2515mm, height: 2438mm.
used
Product weight: 200-400g, speed: 60-80 cycle/min, without documentation.
used
System includes 2x Conveyor SCANVAEGT 7120.25.10, weight: 75kg, Weighing Unit SCANVAEGT 7147.275.10, weight: 180kg and Separator, weight: 395kg.
used
• For sorting and erecting of bottles, consisting of: - Feeding bunker with elevated conveyor, type BBR 350 B, filling volume 350 l, filling weight max. 75 kg, belt width 400 mm, bar distance 300 mm, belt length 2,00 m - Bowl feeder, type RF52 L, diam. 800 mm - Vibrating conveyor, type LFL 650 - Outfeed conveyor, type PMA 30, belt width 30 mm, belt length 2,10 m, for lining up e.g. at a filling machine • With change parts for bottle 5 ml (diam. 20,7/20,9/21 mm) and 10 ml (diam. 23 mm) • Electr. connection 230V/50Hz
used
• Sorting insert diam. 650 mm made of stainless steel • Frequency control unit • Adjusted for cap diam. 28 x h 12 mm • Plastic housing • Height adjustable • Electr. connection 230V/50Hz
used
- Capacity: up to 10 to/h - Machines in new condition - Due to internal company problems, the installation was only used for 2 harvests Consisting of : - Dosing hopper with vibrating draining table BUCHER Length 2000 x width 1800 x height 1750 mm - Conveyor belt BUCHER EA 3600 Belt width: 400 mm Belt length: 3600 mm Hopper dimensions : Length 1350 x width 950 x height 1100 mm - Destemmer BUCHER DELTA E2 Standard machine Length 2600 x width 900 x height approx. 2000 mm - Sorting machine BUCHER DELTA R Flow Length 4250 x width 1600 x height 1780 mm Table dimensions, inside : Width 900 x height 1000 mm - Flat mash pump Length 3300 x width 750 x height 1000 mm Hopper Length 1200 x width 750 x height 450 mm
used
TECHNICAL SPECIFICATIONS Manufacturer: SALA Description: Lamella thickener Type. LT 200-F5 Year of construction: 1992 Total volume: 86.3 cbm Drive Unit Type: SFL 20040 Working torque: 20,000 Nm Shaft speed: 0.4 rpm Gearbox Type: S.O.M. Planetary Gearbox Sheet thickness tank: 6 mm Flocculator: STAMO AB Flocculator power: 1.1 kW
used
- For bags and cartons - Passage: width 350 / height 875 mm - Mat: 325 x 4000 mm Possibility to change the conveyor
used
Conveyor belt detector + ejection Year: 2000 Software : 1.01 Belt width : 100 mm Passage height: 160 mm
used
Rundholzsortier- und Transportwagen BAJLER ZEMBROD SPURBREITE 3m
used
Transnorm roller conveyor TS 2800 sorter switch 1980-1250-1150 RA1999 Make: Transnorm Roll width (RB): 1150 mm Nominal/outer width (NB): 1250 mm Length: 1980 mm Diameter rollers: 50 mm distance between rollers: 76 mm Roller conveyor motor: 2x SEW drive motor Angle of the rollers is adjusted pneumatically (see pictures) conveying speed: approx.1,73m/s maximum recommended box/package width: 400 mm Theoretical sorting speed at 600 mm crate length: ca. 4250/h Included: Side guide included on one side Control valve Optionally available: Supports Side guides on both sides Conversion to box width up to 500 mm Barcode scanner Control system (stand-alone unit) System optimization (e.g. replace valves, dual solenoid valve, forward conveyors, frequency converter) for higher flow rate 6000 and more Translated with
used
ID2842 Knott BSS 19 Evolution year/Bauahr 2017 2995 hours/hours Ballistic disc party Ballistic Disc Separator
used
- Capacity: 10 – 17 to/h - Height-adjustable feet: 500 – 1050 mm - Very little use of the machine - In very good condition
used
ID2836 Construction waste sorting plant / Bauschutt-Sortieranlage year/Year of construction 1995 Construction waste sorting plant, throughput capacity 60,000 kg/h mixed construction waste, 2500-3000 kg/year commercial waste, total 110 KW Sorting system consisting of: bunker conveyor Screening machine (cup screen) Chain conveyor for coarse material Palmiste Tape conveyor belt various chain conveyors Conveyor belts for fines and leftovers screening machine Palm Reading Tape (Ergobelt) Conveyor belt rev. and moveable Electromagnetic belt separator sorting booth Sifter System various conveyor belts sorting status compressor Additional heating for sorting cabin Construction waste sorting plant, throughput 60,000 kg/h mixed construction waste, 2500-3000 kg/year commercial waste, total 110 KW Sorting plant consisting of: Bunker conveyors Screening machine (cup scree ...
used
Lippert Belt Conveyor Belt Conveyor Aligner Conveyor Sorter GF 2640-650-500 RA2048 Technical data: Conveying length (NL): 2640 (1340 + 650 + 650) mm Framework width (NB): 1300 mm belt width (GuB): 500 mm height (BH): 540 to 860 mm support feet: includet Conveying speed (v m/s): 0,8 m/s Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 82 mm Drive drum (AT): Ø = 82 mm Slide travel: 370 mm Year of construction: 2001 Optionally available: controlling/Software Frequency Converters Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2001 condition: good (used) Conveying length in mm: 2640 Nominal / outside width in mm: 1300 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Ampere: 1,30 Conveyor speed m / s: 0,8 scope of delivery: Lichtschranken, inklus ...
used
Blume transfer roller conveyor slider 90° 1880-610-580 RA2045 Make: Running direction: both directions Roller width (RB): 580 mm Nominal/outer width frame (NB): 610 - 670 mm Length: 1880 mm Roller distance: 75-80 mm Ejector side: both sides Motor: drummotor Interroll 24V Lifter: pneumatic cylinder Currently set high: 875 mm Conveyor speed: freely adjustable with frequency converter between 0.275 and 0.667 m/s Optionally available: Light barrier scope of delivery: supports Features: condition: very good (used) Construction year: 2012 nominal voltage: 24V angle: 4x 90° Conveying length in mm: 1880 Nominal / outside width in mm: 610, 680 Roll width in mm: 580 Roll division in mm: 75-80 Driven: YES Engine type: Interroll Trommelmotor Conveyor speed m / s: 0,275 - 0,667 scope of delivery: including supports without side guides For individual, expert advice, simply get in touch with us. ...
used
On offer is a used rumble system with sorting and translator for chamfering concrete and natural stones The plant is fully functional and can still be visited during operation.
used
Gebhardt roller conveyor turnout sorter switch diverter ejector 45° 2400-1300-550 RA1147 Type 356.10 year of construction 2007 perm. weight load: 30 kg/m dead weight: 40 kg/m roll width: 550 mm nominal/external width (NB): 610 mm push-off element: roller adjusted headroom: 680 mm conveying speed: 0,35 m/sec. Brake for dust operation on discharge track drive of discharge mechanism: electric dimensions of the conveyed material: l x w = 600 mm x 400 mm Optional: Adjusted height on your request Electrical attachments like light barriers, barcode sensors Control/Software Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: very good (used) Construction year: 2007 nominal voltage: 230, 380-500V Conveying length in mm: 2400 Nominal / outside width in mm: 1300 Roll width in mm: 550 Roll division in mm: 100 Driven: YES Engine type: SE ...
used
New machine in its original box - price offered 30% off. Description : https://www.sonybiotechnology/us/instruments/fx500-exchangeable-fluidi cs-cell-sorter/specifications/ The FX500 is a microfluidics chip based cell sorter. Its fully replaceable fluidics system lets researchers easily replace the entire fluidics path to control sample-to-sample carryover. The FX500 features comprehensive fluidics controls, advanced automation and easy to use software. Patented CoreFinder™ technology automates instrument setup and streamlines workflow. The optical design offers up to three collinear excitation lasers - 488 nm, 561 nm, and 638 nm and six fluorescence detectors. The six free-form PMTs enable detection of fluorescence signals from any laser-based on filter setting. The FX500 is for non-clinical research use only and is a Class 1 laser product.
used
- Complete system - incl. conveyor belt width 2400 mm with NEW CONVEYOR BELT - Incl. discharge hood with separating parting - incl. ADDITIONAL METAL DETECTOR - incl. SOFTWARE UPDATE FROM PELLENC - incl. COMPLETE OVERHAUL IN OUR SPECIALIST WORKSHOP IN D-59329 WADERSLOH - incl. COMPLETE DOCUMENTATION - YEAR OF CONSTRUCTION 2015
used
Transnorm accumulating roller conveyor with ejector 3820-700-645 RA2279 Make: Transnorm Running direction: both directions Roller width (RB): 645 mm Nominal/outer width (NB): 700 mm Length: 3820 mm Diameter of rollers: 50 mm Roller spacing: 60 mm Drive: SEW geared motor, WA20/T DR63L4/TH and 24 V drum motor Electrical data: V 380, kW 0.25/S1 Frame height: 120 mm A total of 6 modules preloaded with 2 dischargers each. There is a storage space between each discharger as a buffer Conveying speed: 0.33 m/s Optionally available: Supports Side guides on one and both sides Frequency converter for stepless speed control Adjustable length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: very good (used) nominal voltage: 24V, 380-500V Conveying length in mm: 3820 Nominal / outside width in mm: 700 Roll width in mm: 645 Roll d ...
used
- Complete system - incl. conveyor belt width 2400 mm with NEW CONVEYOR BELT - Incl. discharge hood with separating parting - INCL. BLOWER FOR FOIL SORTING - incl. SOFTWARE UPDATE FROM PELLENC - incl. COMPLETE OVERHAUL IN OUR SPECIALIST WORKSHOP IN D-59329 WADERSLOH - incl. COMPLETE DOCUMENTATION - YEAR OF CONSTRUCTION 2015
used
- Complete system - incl. conveyor belt width 800 mm - Incl. discharge hood with separating parting - incl. SOFTWARE UPDATE FROM PELLENC - incl. COMPLETE OVERHAUL IN OUR SPECIALIST WORKSHOP IN D-59329 WADERSLOH - incl. COMPLETE DOCUMENTATION - YEAR OF CONSTRUCTION 2015
used
Capacity up to 6 tons For more details contact with us
used
- 17 programmed formats, 0.5l, 0.75l, 1l - Machine in very good condition
used
Electricity: Single phase 230v / 5kVa / fuse 25 A / wires 4 mm 50/60 hz The electricity consumption for an 8 hours shift is approximately 2500W x 8h = 20kWh. Cooling water: Since the cooling unit (stainless steel) is a closed water-circuit, there is no water consumption (after a one-time fill). Minimum pressure: 1 bar (15psi) Maximum pressure: 3 bar (45psi) Temperature: between 13°C and 18°C Quality: lime free and reusable Inlet Connection: inch Outlet Connection: inch Compressed Air: Typical consumption of compressed air is 200 Nm / h (120 cfm), with a maximum consumption of 450 Nm / h (300 cfm). Minimum pressure: 6 bar (90 psi) Maximum pressure: 10 bar (145 psi) Quality: iso 8573.1 air quality standard Connection: 1.5 inch
used
Polymer plant incl. motors, tanks and agitators, etc.
new
NON-FERROUS METAL SORTER - with vibrating feed conveyor and magnetic drums - For sorting e.g. iron, aluminium and copper - Conveyor width 500 mm - 14-pole concentric separation drum - Sturdy PVC strap - With control cabinet, 2 frequency converters for the band and the separation drum - Color according to customer requirements - New machine made in the EU
used
Meiko mobile basket sorting station for 6 baskets, model: station de triage a paniers, serial number: 10174337, year of construction: 04.2011, 400 V, 3 Ph, 50 Hz, 1.1 A, 0.18 kW, plastic rollers, roller width: 370 mm, total dimensions: 4000 mm x 1400 mm x 1570 mm.