sort used for sale

NEW, 100 cm width, with Lehnhoff MS03 Symlock mount, 207 kg dead weight, suitable for 4.0 - 5.5 t excavators

NEW, 80 cm width, with Martin M03 mount, 125 kg dead weight, suitable for 2.8 - 3.9 t excavators

NEW, 80 cm width, with Martin M03 mount, 125 kg dead weight, suitable for 2.8 - 3.9 t excavators

Technical data: total length: 5.3 m boxing number: 5 pieces impulse: 1.5 kW conveyor height: 2,350 m

Technical data: total length: 9.7 m boxing number: 5 pieces impulse: 1.5 kW conveyor height: 2,350 m

• Sorting insert diam. 550 mm made of stainless steel • Frequency control unit MFS 168 • Oscillation 3000 • Plastic housing • Height adjustable • Mobile • Electr. connection 230V/50Hz

Accu-Sort Axiom-X 2L Barcode Scanner RA2283 Manufacturer: Accu-Sort Model: Axiom-X Number of lasers: 2 Maximum scans per second 1120 SPS Voltage: 230V AC (12-30V DC) , 24V output Size L 311 mm x W 354 mm x D 176 mm Weight of scan head 6.6 kg Mounting bracket: 1.9 kg Cable base 0.8 kg Power supply unit 1.1 kg Housing Powder-coated cast aluminum, high-impact plastic, protection class IP54 Operating temperature: 0° to +50° C Storage: -20° to +70° C Relative humidity 10% - 90% non-condensing Laser type Visible laser diode 650 nM (standard) Power consumption < 40 W Optical indicators (LEDs) Status, trigger, read, RX/TX, network, link, read quality (5 LEDs) Barcode types All standard 1D symbologies Connections Dedicated setup connection, optional RJ45 connection for Ethernet Communication Standard On-board EtherNet/IP, Ethernet TCP/IP, Serial RS232, RS422 and 4 programmable I/O relays Comm ...

Technical Conditions - Application: Outdoor, temperature range –10°C to +40°C, weather-protected - Operation: 8 hrs/day, 1-shift (06:00–18:00) - Material: Pre-sorted KVA (waste incineration slag), 0–500 mm, mixed with wood, plastics, metals, dry - Capacity: ~5 t/h (max. 10,000 t/year) - Foundation: Concrete floor with steel structure Main Components - Feed Bunker with Vibrating Feeder (SFLU 800-2505000) - Input: KVA slag, up to 500 mm - Capacity: 5.0 t/h - Wear-resistant lining (similar to Hardox 400) - Weight: ~5,000 kg - Belt Conveyor FB 1,000 RB (3,000 mm) - Incl. magnetic separator integration - Permanent Overband Magnet Separator (IMP Z-120) - Removes ferrous metals - Sorting Belt Conveyor FB 1,000 RB (6,500 mm) - With hand-sorting section - Belt Conveyor FB 1,000 RB (4,000 mm, swivel type) - Swivelling discharge, manual adjustment - Steel Sorting Platform / Wal ...

Screw-on plate with Martin M10 mount, - Suitable for demolition & sorting grapples:, - GRP450, - GR45, - GRP750, - GR75, - Mount: Martin M10, - Hole pattern: 36 x 48 cm, - Made of mechanical steel S355, - Dimensions see product pictures, - Immediately available from stock

NEW, 140 kg net weight, suitable for 1.5 - 4 t excavators, oil flow for excavators 15 l/min, with mounting plate, available with various mounts such as Martin & Lehnhoff mounts

Screw-on plate with Martin M10 mount, - Suitable for demolition & sorting grapples:, - GRP450, - GR45, - GRP750, - GR75, - Mount: Martin M10, - Hole pattern: 36 x 48 cm, - Made of mechanical steel S355, - Dimensions see product pictures, - Immediately available from stock

NEW, 140 kg net weight, suitable for 1.5 - 4 t excavators, oil flow for excavators 15 l/min, with mounting plate, available with various mounts such as Martin & Lehnhoff mounts

NEW, 690 kg net weight, suitable for 7 - 16 t excavators, oil flow for excavators 45 l/min, with mounting plate, available with various mounts such as Martin & Lehnhoff mounts

NEW !, 2024 Mustang GRP1000 Demolition & Sorting Grapple, 990 kg, Suitable for 13-19 t excavators, Required dredging power: 300bar, Oil flow rate of the excavator: 50 l/min, Grapple capacity: 70 bar, Oil flow rate of the grapple: 30 l/min, Many more grapples available!

Screwing plate / hammer plate / demolition grapple plate / sorting grapple plate suitable for Hammer and Mustang GRP250 and GR25

Mustang GRP1500 demolition & sorting grapple, Technical specifications:, - Year of construction: 2025, - Dead weight: 1250 kg, - Suitable for 17-23 t excavators, - required excavator power: 300 bar, - Excavator oil flow rate: 75L/min, - Gripper capacity: 70 bar, - Gripper oil flow rate: 30L/min, Many more grippers available!

NEW, 1640 kg net weight, suitable for 22 - 31 t excavators, oil flow for excavators 90 l/min, with mounting plate, available with various mounts such as Martin & Lehnhoff mounts

Mobile sorting table Cycle Sort Type B BJ 2025

Mustang GRP450D demolition & sorting grapple, Suitable for 5-12t excavators, With hydraulic rotator, 60cm AB, 145cm opening width, 50cm gripping height when open, Transport dimensions:, - 200cm length, - 70cm wide, - 125cm height, - 600kg

System Description Partial automated sorting system for returnable beverage crates and EPS foldable trays. Incoming returnable containers arrive mainly on Euro and half pallets and must be manually unloaded due to mixed crate types. Additional quantities arrive in roll containers. Main Functions - Identification and sorting of various returnable crate types - Deposit value calculation per crate based on pallet barcode - Sorting of bottles into 20-unit and 24-unit module crates - Automatic unpacking of EPS trays with bottles using Inlet systems - Handling of up to 440 crate types - Sorting of standing bottles inside EPS trays with Inlets - Allocation of sorted crates for automated palletizing or manual handling Capacity and Performance - Total annual throughput: 6.5 million crates - Operation: 2 shifts per day, 5 days per week - Average throughput: 1,625 crates per hour - Peak throug ...

old sorter for hobbyists to pick up from our customer - still running, but rather "somehow" VB 2 crates of beer

General SKU336T901 MakeJ. Engelsmann AG TypeM3.C.187/3-1.4541 Mach.No.30059 Year of construction2006 Main Features MaterialStainless steel Motor1.5 KW Length700 mm Specified Features - Sorting sieve Sorting sievecheck Sieve surface1.9 m² Number of sieve decks:2 Number of fractions:3 Sieve sizes700x680 mm Sieve perforation5,5-1,5 mm With covercheck InletDia: 150 mm OutletDia: 140 mm, Dia: 110 mm (2x) Unbalance drivecheck Motor1.5kW, 220-240/380-420 Volt, 940 rpm Variable speed drivecheck With extra sieve decks1 MaterialStainless steel 1.4541 (321) Information LocationBarneveld Mounted on mild steel framecheck With switchcheck With switchgearcheck(as is) Floorspace4,5x1,9 m Total height1,6 m Weight2100 kgSorting sievesEngelsmannSieves > Sorting sievesBrand > Engelsmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price ...

General SKU336T902 MakeEngelsmann TypeM3.C.187/3/1.4541 Mach.No.32516 Year of construction2007 Main Features MaterialStainless steel Motor1.5 KW Length700 mm Specified Features - Sorting sieve Sorting sievecheck Sieve surface1,9 m² Number of sieve decks:2 Number of fractions:3 Sieve sizes700x680 mm Sieve perforation5,5-1,5 mm With covercheck InletDia: 150 mm OutletDia: 140 mm, Dia: 110 mm (2x) Unbalance drivecheck Motor1.5 kW, 220-240/380-420 Volt, 940 rpm Variable speed drivecheck MaterialStainless steel 1.4541 (321) Information LocationBarneveld Mounted on mild steel framecheck Floorspace4,5x1,9 m Total height1,6 m Weight2100 kgSorting sievesEngelsmannSieves > Sorting sievesBrand > Engelsmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You ar ...

PAPER CARTON SORTER good condition Available now! cheap to give away

· NON FERROUS SEPARATOR EDDY CURRENT · For the separation of aluminium and copper · Width 1000 mm · 14 poles concentric drum · Durable PVC belt conveyor · With electric cabinet, with 2 pieces of frequency inverters for speed adjustment of conveyor and separation drum · RAL color according to the customer´s choice · New machine manufactured in the EU

Omnidirektionaler barcode scanner X Manufacturer: ACCU-SORT Featured: The Omni-directional barcode scanner product family mini-X are used for the reading of arbitrarily oriented bar codes. This is made possible by an optical arrangement of several arranged crosswise to each other scanning, which is integrated in a compact housing. Bar codes can be identified at a distance of 500 up to 1800 mm. A total of six configurations to satisfy a wide range of read. With the DRX de fragmentierung technology also badly damaged or poorly printed codes can be reconstructed safely. The TachTrac function maps the read result the right object with several objects in the reading pane. RS 232, RS 422 or RS 485 interfaces the reading result is decoded in the device is delivered. Usage area: The Omni-directional barcode scanner X for arbitrarily oriented bar codes is used in identifying non-aligned obj ...

For sale is a used parcel sorter. The Sorter solution consists of a high speed processing system capable of the following: • Ergonomically designed manual induction prep section for 2-operators that will allow Efficient processing: • 5,000 pieces per hour (pph) in barcode reading mode with a single operator. This mode does not require orientation of the product and will be used for the reject processing of parcels back into the Parcel Manager- (extreme pieces must be oriented). • 5000 pph for labeling and OCR mode with two operators. This mode requires the operator to orient and bring the product to the edge. • Automated product gapping with minimal skewing • In-motion weighing and dimensioning Jcg2w8n • Top read, full piece image, omni-directional camera solution with complimentary dual barcode reading and OCR address reading software • High speed linerles ...

Sorter, Translog, approx. 471m, – used - : Price: ex location: 209.500.-€ (net), packed and loaded! Total length upper line: 327.50m Total length of lower line: 144m Manufacturer: Translog (NL) Year of manufacture: 2023 Drive shaft iConveyor Working width 900 mm Overall width 1,000 mm Length according to scheme 3000 68 204.00 Height level 1: 850 mm +/ 50 mm Level 2: 2,500 mm +/ 50 mm Rollers Fi 50, galvanized steel Roller spacing 75 mm Drive type: Geared motor Side frame: 35 mm Material: Powder-coated steel Drive shaft iConveyor Working width 900 mm Overall width 1,000 mm Length according to scheme 1500 4 6.00 Height level 1: 850 mm +/ 50 mm Level 2: 2 500 mm +/- 50 mm Rollers Fi 50, galvanized steel Roller spacing 75 mm Drive Type: Gear Motor Side frame: 35 mm Construction material: powder-coated steel Ascent/descent conveyor belt Working width ...

Lasers, barcode scanners, position scanners, barcode scanners -Manufacturer: Accu-Sort, barcode scanner -Type: Axiom-X -Dimension: 360/220/H410 mm -Weight: 11 kg

Vehicle rack, commercial vehicle equipment, sortimo block, equipment block -Manufacturer: Sortimo, vehicle rack vehicle equipment with vice -Type: unfortunately without type designation -Mounting kit: BFE215 -Vice: clamping jaws 120x25 mm, span 170 mm -Dimensions: 1720/380/H1500 mm -Weight: 88 kg

Tap for blind hole drilling -Tap tools: extensive range -Type: Coarse and fine threads, see photos -Sale: only complete set -Transport dimensions: 1200/800/H120 mm -Weight: 205 kg

2022 Diebels RMH Con Sort III Wet cutting table Technical data: Drive power [kW]: 2.6/32 CEE plug Separating area LxW [mm]: 1270 x 710 Lightweight discharge area [mm]: 1270 x 710 Number of water pipes [pcs]: 5 Number of water nozzles [pcs.]: 18 Water tank volume [litres]: 400 Electrical connection [V/A]: 400 / 32 CEE plug Weight [kg]: 750 Dimensions (without tank) LxWxH [mm]: 2500x1010x1120 Speed control in 3 stages via potentiometer on the control cabinet VA water tank with waste water pump Automatic water level control via Quick stop Operational hours: 100 hours. The separate water tank with filter was adapted by us to this system and would also be included in the sale if desired. This also applies to the table frame. Find more here - / Contact us at -

description: High quality control unit for pallet conveyors for a part of a 50.000 bph filling line For approx. 5 frequency controlled drives in a total, diverse protective switches (see pictures for details). The Danfoss inverters are overhauled (formated) and can be commissioned without concern. The software might be added as well. An andaptation to your project can be also offered. Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offe ...

description: The paddel dirstributor allows a 1 line-> 2 line distribution. This offer does not include a distribution table (can be offered separately). The distribution is incl. paddle/ frame/ switchboard / software serial number: 041483 Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you in your company to do an on-site survey. Our DRINK technic ...

Newtec CELOX optical sorting line, Machine has been upgraded to the newer type CELOX in 2016, The order is based on the following specifications, Ambient temperature ± 5 – 25 ºC., Product Clean, washed carrots, Capacity: 8 to 10 tons per hour, depending on the batch, (quality and sorting), Product foreign materials The Celox cannot detect foreign materials such as glass,, wood, stones etc., Functionality:, Length: +/- 3mm (less than 1% errors), Diameter: +/- 1mm (less than 1% errors), broken: 60-65% is removed (on normal broken carrots) there will be 5-6% good, carrots among the errors, C/S shape: 85-90% is removed. There will be 3-4% good carrots among the errors, Volume: +/- 5%, -Incl. conversion of complete camera unit to new version, -9 Cameras with 8 megapixel resolution (current 2 magapixel), Cameras look at the carrots from above and below at an angle, -Better detection of roo ...

Checkweigher to check if product meets target weight. 6 sorting stations with 2 way reject device, each. - Specifications: belt width: 220mm | weight range: 5-1000g | accuracy: +/- 0.3-3g | max. speed of the machine in neutral: 60 cycles/minute | power: 220V, 1-phase | machine dimensions (mm) approx.: L2459xW684xH780(weighing belt). Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Separates polymers, colors (including black). Partially shoots aluminum (sees by color). The sorting machine additionally includes: a platform, a chiller ~3.5kW (for cooling), a flake feeding system (by fan), suction of good flakes and feeding into a packing cyclone + cyclone/bunker + big bag frame with pneumatic cylinders, suction of bad flakes into a cyclone (separate from good ones). We sorted 1-1.3 tons/hour of sufficiently quality PET flakes.

Manufacturer: Buhler Model: SORTEX E PolyVision Year of Manufacture: 2018 Type of Machine: Optical sorting line Sorting Capabilities: - Capable of separating materials by color, including black and polymers. - Detects and partially ejects aluminum based on color recognition. Included Components: - Operator platform - Water chiller (~3.5 kW) for cooling - Flake feeding system with fan-assisted delivery - Suction system for good flakes with transfer to a packing cyclone - Cyclone/bunker unit with big bag frame and pneumatic cylinders - Separate suction and cyclone system for rejected (bad) flakes Performance: - Proven throughput of 1 to 1.3 tons per hour with sufficiently clean flake input Additional Applications: - Suitable for sorting berries and other small-sized items Technical Specifications Dimensions (Service Access - Including Vibrator): - Width: 2651 mm (104.8 in) -  ...

Transnorm belt conveyor belt conveyor belt flap belt Smart Sort GF 1450-800-700 RA2037 Technical data: Conveyor length (NL): 1450 mm frame width (NB): 800 mm, 150 with motor Belt width (GuB): 700 mm headroom (BH)/transfer height : 800 mm Conveying speed (v m/s): 1.47 Drive: SEW gear motors, with brake at angle adjustment Electrical data: 50Hz V380-500, kW 0,37 drive belt and 2,2 drive angle height of sorting out bottom: 500 mm sorting height top 1200 mm Angle adjustment speed: 1s from min to max year of construction: 2009 Special feature / accessories: 4x proximity sensors for angle determination Optionally available: Side guide one-sided and both-sided Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2009 condition: Ausstellungsstück Conveying length in mm: 1450 Nominal / outside width in mm: 800, 1150 Belt width  ...

Laboratory screening machine Pfeuffer Sortimat K3, Screen stack with 3 sieves Slot perforations 1.1 mm, 1.8 mm (rye) and 3.5 mm Interchangeable screen with frame 2.0mm (wheat) 230V, with power cord. cleaned and test run carried out Very good condition

for 7 - 16 t dead weight, 700 kg dead weight, 45 l / min oil flow, 360° rotation, various mounting plates & hoses available on request

for 5 - 12 t excavator, 480 kg net weight, 25 l/min excavator oil flow capacity, 360° rotation,

General SKU324U773 LocationBarneveld MakeOCS Checkweighers GmbH TypeHC No.1004488 Year of construction2009 Main Features MaterialStainless steel Specified Features - Miscellaneous transport MaterialStainless steel Information Total height1,71m Weight370kg CEcheck Floor space2,16x0,83m Extra SpecificationsOperating pressure: 6 bar.Operating temperature: +5°C...+40°C.Maximum weighing range: 1500 g.Belt width: 195 mm.Scale platform: 195x250 mm.Feeder belt width: 32 mm.Feeder belt height is adjustable.Miscellaneous transportWipotecConveying systems > Miscellaneous transportBrand > Wipotec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU300U1003 LocationBarneveld MakeCI Electronics Type195/36 Sade P2 No.TP595 Main Features MaterialStainless steel Specified Features - Miscellaneous transport MaterialStainless steel Information Floorspace0,80x0,65 m CEcheck Total height1,37 m Weight70 kg Extra SpecificationsTablet/capsule weight sorter, capacity: 5-2000 milligrams, processing 55 tablets/capsules per minute.Miscellaneous transportCI ElectronicsConveying systems > Miscellaneous transportBrand > CI Electronics What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Cup Ø: - mm depth: - mm NUMBER OF TURNS: - total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical Data Type of Machine : Automated Packaging Line Sorter Year of Manufacture: 2011 Number of chutes: 20 + 1 reject chute Control system: PLC Throughput: Up to 2,800 packs per hour Remarks The sorter is fed by an infeed conveyor (90° angle or straight). The infeed conveyor is included in the price. Inspection The sorter is currently connected to a Bizerba GLM-I Find more here - / Contact us at -

A full USNR automatic saw mill, - Log yard with debarker and sorting, - canter chipping line, - 3x quadro bandsaw, - 2x automatic edger line, - Almab drop sorting line for main products, - USNR drop sorting line for side products

Dimensions: 3.5 x 7m, Electricity: 9x 230v sockets and one 16A socket, Light: available, shatterproof (food standard), Ventilation: Large, professional ventilation system with filters. Supply air damper also with filter. Additional insulated exhaust duct for connecting a portable air conditioner (not included)., Sink/Water: Mobile sink from Calosy with shower, hot water, tanks for fresh water and waste water., Floor: Currently directly on the hall floor. Custom flooring can be installed if the existing hall floor is unsuitable., Door: 118cm wide, also fits wide pallets., Materials + surfaces: Clean room made of wood (solid carpentry), stainless steel surfaces, easy to clean., Upper floor + stairs: accessible, storage and workstations possible, stairs approved by the employers liability insurance association (steepness, height, steps)., General standard: 100% food-safe; this room was prod ...

Cutter knife, dicer, multi-purpose cutter, slicer and portion cutter, cutter knife, cutter knife, dicer -Manufacturer: Holac, knife set for meat cutter multi-purpose cutter dicer -Type: various versions, see photos -Price/Delivery: complete -Transport dimensions: 590/390/H220 mm -Weight: 71 kg