soco system used for sale

General SKU289P502 LocationBarneveld MakeSartorius (DE) TypeSARTO / UF / M30 No.3/30/002/6 Main Features MaterialStainless steel Specified Features - Miscellaneous filter MaterialStainless steel General Year of construction1996 Floor space1.9x1.1 M Total height2.1 M Weight500 KG Extra information There are 2 x Mebraline filters from 2013 on this skid (25 bar -10 / + 80 Deg. C 47 Ltr) 1 Alfa Laval LKM pump type LKH-114. SSS 18.5 kW from 1996 1 tube heat exchanger length 1300 mm with 52 pipes 12 mm internal total VO 3 m2 1 spare filter cartridge (Microdyn-Nadir Spira-cell PS UH030 8338C prof nr 00201525) 1 Danfoss HVAC DRIVE controller type VLT 3532 HV-AC 380-415 Volt Performance according plant info was performance up to 30 m³/h ( Product Heparin) Fine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPa ...

General SKU219N106 LocationBarneveld MakeSysTec Systemtechnik und Industrieautomation gmbh Main Features MaterialMild steel Specified Features - Miscellaneous transport Capacity0,4 - 150 KG Miscellaneous transport MaterialMild steel General TypeIT1000 Mach.No.1606952 Extra Specifications110-240 VAC/50|60Hz/100mAStarchAgrochemicalsSpicesPlastic & polymersCatalysts & fillersDetergent & surf.SugarOther feedSolid pharmaceuticsDyes & pigmentsMinerals & inorganicTea, herbs & coffeeGeneric medicinesPowdered foodsMiscellaneous transportSystec SystemtechnikIndustries > Food & Feed > StarchIndustries > Chemical > AgrochemicalsIndustries > Food & Feed > SpicesIndustries > Chemical > Plastic & polymersIndustries > Chemical > Catalysts & fillersIndustries > Chemical > Detergent & surf.Industries > Food & Feed > SugarIndustries > Food & Feed > Other feedIndustries > Pharmaceutical > Soli ...

General SKU245P306 LocationBarneveld MakeHosokawa Alpine Type160 UPZ No.6667 Main Features Motor6 KW Inlet diameter160 mm Specified Features - Fine Impact Mill Grinder:plate beater: Rotor sizedia.160mm Moving hammerscheck With grinding trackcheck Feeding with rotating valvecheck Motor4,9/6 KW, 380 Volt Fine Impact Mills MaterialStainless steel General Year of construction1995 Extra SpecificationsComplete size reduction system including Rotary valve Typ 150 V2A, K-Tron Soder S200 dosing screw, dust filter and AERON filterStarchAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesFine Impact MillsDetergent & surf.CosmeticsOrganicsE-waste & metalFood additivesSugarAnimal feedConfectionerySolid pharmaceuticsDyes & pigmentsBiopharmaceuticalPlastic & rubberMinerals & inorganicGeneric medicinesPowdered foodsPaints & coatingsConsumer wasteHosokawa AlpineIndu ...

General SKUR0456 MakeAZO GmbH &: Co KG (D) LocationBarneveld TypeAZO Emptying system AZO Batchtainer 700x1005 Main Features MaterialMild steel Number of1 heads Specified Features - Powder filler Powder filler:Emptying system: MaterialMild steel General No.1269665 Year of construction2015 Floorspace1,3x0,9 M Total height0,7 M Extra information This pick-up station is used for discharging product from a container of type AZO Batchtainer This machine is equipped with 2 JVM vibration motors 0.4 kW 380/420 Volt For opening the Batchtainer, a pneumatically driven rotary mechanism is mounted StarchSpicesCatalysts & fillersFood additivesSugarPowder fillersSolid pharmaceuticsDyes & pigmentsBiopharmaceuticalMinerals & inorganicTea, herbs & coffeeGeneric medicinesPowdered foodsAZOIndustries > Food & Feed > StarchIndustries > Food & Feed > SpicesIndustries > Chemical > Catalysts &  ...

General SKUR0455 MakeAZO gmbH &: Co KG LocationBarneveld TypeAZO Emptying system AZO Batchtainer 700x1005 Main Features MaterialMild steel Number of1 heads Specified Features - Powder filler MaterialMild steel General No.1269665 Year of construction2015 Floorspace1,3x0,9 M Total height0,7 M Extra information This pick-up station is used for discharging product from a container of type AZO Batchtainer This machine is equipped with 2 JVM vibration motors 0.4 kW 380/420 Volt For opening the Batchtainer, a pneumatically driven rotary mechanism is mounted StarchSpicesCatalysts & fillersFood additivesSugarPowder fillersSolid pharmaceuticsDyes & pigmentsBiopharmaceuticalMinerals & inorganicTea, herbs & coffeeGeneric medicinesPowdered foodsAZOIndustries > Food & Feed > StarchIndustries > Food & Feed > SpicesIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Fo ...

General SKU437X1381 LocationBarneveld Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure tubes6 Bar Main Features MaterialStainless steel Surface5 m2 Specified Features - Plate heat exchanger Heat exchangercheck Horizontalcheck Heating surface8,4 m² Max. temperature200 °C Shell connectionsDN 80 Cover connectionsDN 80 Plate heatexchangers Max. temperature200 Capacity30 l. MaterialStainless steel 1.4404 General MakeGEA PHE Systems Serial303/10016 TypeBT30-5C-10V-80 Year of construction2010 Floor space0,47 x 0,33 m Total height0,74 m Weight422 kgFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlate heat exchangersPlastic & polymersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDy ...

General SKUR0453 MakeAZO gmbH &: Co KG LocationBarneveld TypeAZO Emptying system AZO Batchtainer 700x1005 Main Features MaterialMild steel Number of1 heads Specified Features - Powder filler Powder filler:Emptying system: MaterialMild steel General No.1269665 Year of construction2015 Floorspace1,3x0,9 M Total height0,7 M Extra information This pick-up station is used for discharging product from a container of type AZO Batchtainer This machine is equipped with 2 JVM vibration motors 0.4 kW 380/420 Volt For opening the Batchtainer, a pneumatically driven rotary mechanism is mounted StarchSpicesCatalysts & fillersFood additivesSugarPowder fillersSolid pharmaceuticsDyes & pigmentsBiopharmaceuticalMinerals & inorganicTea, herbs & coffeeGeneric medicinesPowdered foodsAZOIndustries > Food & Feed > StarchIndustries > Food & Feed > SpicesIndustries > Chemical > Catalysts & fill ...

General SKU312X1454 LocationBarneveld MakeAura Specified Features - Temperature control unit MaterialCopper, Stainless steel 1.4552 General Serial113819/1 TypeTST 140/8/185 – 25(50)/32 Year of construction2011 Mounted on framecheck Floorspace11 23 Total height1,9 Weight1000 Extra information Thermal oil secondary control circuit / temperature control station (heating duty)Heat transfer medium: thermal oil (Mobiltherm 603)Heating capacity: 140 kWSupply temperature from heater: 200°CCirculation pump: 8 m³/h, 9 m head, 1.1 kW, 1450 rpm, 3 × 400 V / 50 HzElectrical control cabinet section with main switch, E-stop, pump/heater controls, and indicator lamps (as is)Fine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsTemperature control unitsDetergent & surf.Other pharmaceuticsCosmeti ...

This 6 axes MEI robot arm was manufactured in 2023. This system was manufactured for a project in the automotive industry. It features a total installed power of 26 kW and operates at a maximum peak air flow of 62.5 liters/min. The machine is equipped with a main control cabinet and various pneumatic components from SMC. If you are looking to get high-quality automation capabilities, consider the MEI robot arm we have for sale. Contact us for further details.

Manufacturer: Harald Baumgarten/Sema Systemtechnik Model: TM 400S Year of Manufacture: 2014/2015 Type of Machine : Angle Grinding System The system consists of the following components: - Cut-off grinding machine type TM 400 S with bundle loader (manufacturer Sema Systemtechnik, - rod breaking device, - Rod rotary drive / measuring station - Weighing station with section sorting, - Extraction and filtration system, - Soundproof booth (manufacturer: HüWa Schallschutz und Anlagenbau) and protective fencing - Four-column press (Manufacturer: Winter Presses) - Hydraulic power unit with hydraulic pumps - Control cabinet and control panel Find more here - .ucymachines/ Contact us at - sales@ucymachines

General SKU327X676 LocationBarneveld CEcheck MakeLauda Pressure Working pressure10 Bar Main Features Heating (medium)Water glycol Capacity7.5 KW Temp.140 °C Specified Features - Temperature control unit Temperating machinecheck Heating medium:water/glykol Electric capacity7,5 kW Temperature—25 / 140 °C Tank capacity50 l. With pump(2x) Capacity4 m3/h Motor2x 3 kW (400 V, 2900 rpm) With temperature controllercheck MaterialCopper General TypeTR350HT Mach.No.HKS08078 Year of construction2008 Mounted on framecheck With switchcheck With switchgear(as is) Floorspace1,00 x 1,50 m Total height2,00 m Weight1500 kgFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsTemperature control unitsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSu ...

General SKU394U1111 LocationBarneveld CEcheck MakeLauda Pressure Working pressure3 Bar Main Features Heating (medium)Oil Capacity12.46 KW Temp.130 °C Specified Features - Temperature control unit Heating medium:Therminol D12 Electric capacity12,46 kW, 400 volt, , (Ex) Temperature-35/130 ºC With pump(2x) Capacity18 m³/h Motor5,5 kW, 400/690 volt, 2925 rpm (EX) (2x) MaterialStainless steel 1.4571 (316Ti) General TypeTR400HK/K-EX Mach.No.HSK13074 Year of construction2013 With switchcheck Floorspace1,75x1,0 m Total height2,5 m Weight1800 kg ATEX designedcheckFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsTemperature control unitsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectio ...

Pressure-tight clamping connection, formwork accessories, KRASO clamping connection -monolithic connection of the vulcanized KRASO locking disc -Easy installation -No assembly on site -simple closure of the clamping point -no complicated gluing of the sealing plugs -no labor-intensive rework -absolutely watertight clamping point -Tested to be watertight inside and out -from company liquidation -Total length: 300 mm -1 wire mesh box approx. 350 pieces -Weight: including box 142 kg

Screen keyboard, control cards for lamp-pumped lasers, marking lasers, control card, input card, control -Manufacturer: HAAS LASER -Control comes from a marking laser SLS Spectron Laser Systems -Type: Handling Gretag Laser 6211 -Q-BW-Driver: 68.11.40 -Control is sold untested from stock, so as a spare parts carrier -Dimensions: 530/500/H135 mm -Weight: 14 kg

Air cooler, evaporator, cold cell, industrial cooler, cooling unit, cooler, water cooler, cooling system, cooling -Manufacturer: Gretag Cooler -Cooling system comes from a marking laser SLS Spectron Laser Systems -Type: Handling Gretag Laser 6211 -for distilled water -Dimensions: 482/620/H177 mm 590/240/H705 mm -Weight: 37kg

Control cards for lamp-pumped lasers, marking lasers, control cards, input cards, controls -Manufacturer: SLS Spectron Laser Systems -Control comes from a marking laser -Type: Handling Gretag Laser 6211 -Control is sold untested from stock, so as a spare parts carrier -Dimensions: 482/400/H88 mm -Weight: 5 kg

Power supply for lamp-pumped lasers, marking lasers, control card, input card, control -Manufacturer: SLS Spectron Laser Systems MAINS SUPPLY -Control comes from a marking laser -Type: Handling Gretag Laser 6211 -Control is sold untested from stock, so as a spare parts carrier -Dimensions: 482/530/H220 mm -Weight: 15 kg

Screen keyboard, control cards for lamp-pumped lasers, marking lasers, control card, input card, control -Manufacturer: SLS Spectron Laser Systems -Control comes from a marking laser -Type: Handling Gretag Laser 6211 Screen keyboard -3x cards type: EK-1 MPS 732/015 -Control is sold untested from stock, so as a spare parts carrier -Dimensions: 530/398/H290 mm -Weight: 18 kg

Power supply for lamp-pumped lasers, marking lasers, control card, input card, control -Manufacturer: SLS Spectron Laser Systems -Control comes from a marking laser -Type: Handling Gretag Laser 6211 -Control is sold untested from stock, so as a spare parts carrier -Dimensions: 482/500/H266 mm -Weight: 54 kg

Power supply for lamp-pumped lasers, marking lasers, control card, input card, control -Manufacturer: SLS Spectron Laser Systems -Control comes from a marking laser -Type: Handling Gretag Laser 6211 -Control is sold untested from stock, so as a spare parts carrier -Dimensions: 482/540/H178 mm -Weight: 11 kg

Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Quantity: 1x unit available -Dimensions: 400/180/H500 mm -Weight: 32 kg

Control board, output board, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, communication processor, digital interface balancer -Manufacturer: Balance Systems Balancing Unit B6 from CNC machining center Santenberg GTC S 2 -Terminal modules: Type 9SHVM2510NL000 (2 pieces) -Dimensions: 300/275/H130 mm -Weight: 5.3 kg

Pump control for centrifugal pumps, high-pressure pumps, water pumps, multi-stage vertical centrifugal pumps, control units, comfort control technology -Manufacturer: Wilo, control unit with control board / control card -Control device: Type CR system -Control card/board: 7022034.3 CR-LP-N 002 008 008 -Shipping/Price: complete -Dimensions: 270/230/H90 mm -Weight: 2.1 kg

Measuring machine, measuring and marking machine, coordinate measuring machine, coordinate measuring machine, form tester, clamping plate, marking and marking plate, measuring plate, measuring table, welding table, welding table, surface plate -Manufacturer: Stiefelmayer Type C-System -Digital display: Stiefelmayer type MZ 2000 -Travel paths: X 2450 mm, Y 1215 mm, Z 1645 mm -with: 6x adjustable feet -Accessories: see photos -Measuring plate: 2000/3000/H355 mm -Dimensions: 2540/3000/H2630 mm -Weight: 4660 kg

Cable winch, hoist winch, construction winch -Mechanical winch: with planetary gear without drive -hydraulic brake -Traction force: approx. 20,000 kg -Drum: Ø 500 mm -Rope diameter: 24 mm -Rope to be wound length: 2x 28 m -Number: 2x winches available -Price: per piece -Dimensions: 1640/700/H700 mm -Weight: 1026 kg/piece

ASPARAGUS PEELER, CHRISTIAENS AGRO SYSTEMS, TYPE: 1350-6 Technical description: Machine number: 062 906 Heads number: 6 Power supply: 380-440V/50-60 Hz Dimensions: 1650 x 2000 x 1600 mm

CHRIST PACKING SYSTEM WRAPPING MACHINE FILMTEQ 3030 Fully automatic wrapping machine with innovative sealing unit with automatic spindle locking, for secondary packaging of products using polyethylene film. Modular configuration for integration with other machines and systems, with ergonomic balcony technology for quick format changeover. Ideal for industrial applications that require efficiency, accuracy and adaptability. Built in 2015. CHARACTERISTICS - Production: up to 60 cycles/minute - Wrapping material: Low-density polyethylene film (LDPE) - Packaging type: Single band wrap, with side shrink, or full wrap - Film width: From 30 mm to 300 mm - Maximum reel diameter: 400 mm - Grouping dimensions: (L): 60–400 mm/(W): 60–240 mm/(H): 30–230 mm - Single product dimensions (with stacker): (H): 15–400 mm/(W): 15–90 mm/(H): 60–240 mm ENERGY ...

Description MicroJet Slide Feeder MJ 45 A with MicroJet Conveyor Belt

LaserCleave for Simplex Connectors Used, bought as seen Viewing by telef. Arrangement possible

This IMA AM33 - 3000 /1300 Systems unloading and stacking station was manufactured in 2005. It is a robust and reliable choice for your automation needs. Contact us for more information.

Pitch: 32 mm Working width: 896 mm Boring depth max.: 65 mm Motor output: 2x1,5 kW Overall size: 1122x1040x1250 mm Weight: 380 kg Number of boring spindles: 29 St. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pitch: 32 mm Working width: 1088 mm Boring depth max.: 85 mm Motor output: 2x1,5 kW Overall size: 1320x1040x1250 mm Weight: kg Number of boring spindles: St. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pitch: 32 mm Working width: 704 mm Boring depth max.: 70 mm Motor output: 1,5 kW Weight: 310 kg Number of boring spindles: 23 St. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Conveyor belt systems 21 or 23 according to the desired layout. For the selected asset or your existing lines. Curves, switches and drives can be adapted according to your wishes. On request, we can provide extensive services. In addition to consulting and planning, this also includes transport, assembly and assembly. We will be happy to provide you with a detailed, non-binding offer. All offers are subject to prior sale.

The testing device can measure even the smallest leaks in packaging (helium detection)., The device is little used and in good condition., Information from the manufacturer’s brochure:, The detection limit of < 10-8 mbar l/s of the CONTURA Z can only be determined by mass spectrometric, Analysis can be achieved with a test gas., However, when sensitive flexible packaging is exposed to such a pressure difference,, the sealing seams could be subjected to such severe stress that the package could even burst., Such stress is eliminated by the patented membrane chamber principle of the CONTURA Z²., Function:, The product to be tested is placed manually or automatically on the bottom membrane. When the lid, is closed, the test procedure is initiated automatically., During the evacuation, the pressure of the atmosphere pushes the highly elastic membranes against the, packaging, and the conto ...

Control cards for lamp-pumped lasers, marking lasers, control cards, input cards, controls -Manufacturer: SLS Spectron Laser Systems -Control comes from a marking laser -Type: Handling Gretag Laser 6211 -Control is sold untested from stock, so as a spare parts carrier -1x card type: Gretac SPT 68.12.00 -1x card type: Gretac GPR 68.11.90 -1x card type: Gretac SIP 68.11.87 -1x card type: Gretac IOF I 68.11.96 -1x card type: II 34.74.11 -1x card type: Gretac GSP 68.12.24 -1x card type: Gretac ASP 68.12.36 -1x card type: Gretac GHD 68.12.28 -1x card type: Gretac HSP 68.12.32 -1x card type: Gretac CKB 68.12.48 -1x: Positive Switching Regulator PSR 128E -1x: Positive Switching Regulator PSR 510E -Dimensions: 482/400/H620 mm -Weight: 29 kg

Manufacturer: Wolf Power Systems Model: GTK 50E0 Year of Manufacture: 2021 Type of Machine : CHP UNIT Condition : Never used, never even connected CE Certified: Yes Technical Specifications • Engine Type: Hoeckle HMG 434 S • Generator Type: Marelli MXB-E 225 MA/4 • Fuel: Natural Gas H (Erdgas H) • Electrical Output: 50 kW • Thermal Output: 90 kW • Power Consumption: 146 kW • Gas connection pressure range: 25 to 60 mbar • Maximum operating pressure: 4 bar • Maximum coolant inlet temperature: 90 degrees C • Rated voltage: 400 VAC 3PH 50Hz • Supply fuse: 100 A • Protection class DIN VDE 0470: IP 22 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Reference Num.: 3459 Brand: SIS Paßsystem Type: 50 x 70 cm Available: directly Status: In production Location: Deutschland

Reference Num.: 4284 Brand: Duplo Type: System 4000 Available: directly Status: In production Location: Deutschland Equipment: - Broschürenfinisher mit Frontschnitt - 10 Stationen - Hefteinheit - DUPLO Fronttrimmer DBM-400LS - Falzeinheit

10852025 Beverage Can Filling Line – 1500 Cans Per Hour with CASK mACS Filler (2022) High-quality beverage can filling line with integrated Cask Brewing Systems Inc. mACS can filler, manufactured in 2022 and designed for efficient small- and medium-scale beverage production. This canning line is suitable for beer, kombucha, cider, tea, carbonated soft drinks, and still beverages. The system combines reliable filling technology, flexible can handling, and low-oxygen filling performance to deliver excellent product quality and shelf stability. The line includes a semi-automatic can depalletizer, rinser, conveyor system, and CASK mACS V2.0 three-head can filling station. The depalletizer operates with forklift-assisted pallet loading, allowing cans to flow smoothly by gravity through the rinsing section and into the filler infeed system. The CASK mACS Micro Canning System utilize ...

Manufacturer: Sidasa Type of Machine : ZT100+ Centrifuge System Year of Manufacture: 2017 Application: Zinc Flake Coating for Bulk Small Parts Includes: Associated Dryer CE Certified Technical Specifications - Maximum Coating Capacity: 7.5 tons per hour Find more here - .ucymachines/ Contact us at - sales@ucymachines

Dimeco 1675/Dnbsp;straightener with CNC feed system (cybelec) - width: 500 mm - max thickness: 1,6 mm

Dimeco 1675/D richtmachine met CNC-aanvoersysteem (cybelec) - breedte: 500 mm - maximale dikte: 1,6 mm

Granule dryer, granule drying system, granule conveyor, vacuum conveyor, vacuum station, drying container, vacuum suction conveying system, vacuum suction device, vacuum loader, hopper loader -Manufacturer: Plastic Systems, granulate conveyor vacuum suction conveying system -Type: PD2-40 FC1 -Side channel blower: Elmo Rietschle -Individual components: see photos -Quantity: 1 device available -Dimensions: 530/520/H1120 mm -Weight: 56 kg

Manufacturer: Heiche Model:HEIS01 KTL system Year of manufacture: 1982 Major overhaul: 2008 to 2013 Status: Fully operational Control system: Siemens S7-300 Operating software: Ditec Operating modes: Manual, jog, and fully automatic Technical Specifications - Max. workpiece window: 1,240 x 800 x 600 mm - Max. workpiece carrier weight: 160 kg - Coating material: KTL paint (cathodic electrodeposition) - Coating thickness: 10 to 45 micrometers - Cycle time / throughput: 190 seconds per cycle (18 workpiece carriers per hour) - Noise level: below 85 dB(A) - Overall dimensions (L x W x H): 9,000 x 12,000 x 7,000 mm - Number of baths: 15 - Number of loading and unloading stations: 6 - Conveyor system: Chain conveyor by KEWESTA - Dip system: Lifting station by Klaus Sessler - Drying: Curing oven by Rippert Electrical and Utilities Data - Supply voltage: 3-phase 230/400 V / 50 Hz - Con ...

We are offering for sale a complete used longitudinal beam welding line, comprising the following equipment: MACHINE 1 - TACK WELDING DEVICE - Manufacturer: Wehling - Type: Heftvorrichtung Langsträger - Year of Construction: 2015 - Power: 0.25 kW + 28 x 0.06 kW - CE Marked: Yes Technical Specifications: - Maximum beam length: 13,700 mm - Beam height range: 70 to 500 mm - Flange width: 150 mm and 120 mm (after conversion) - Flange thickness: 5 to 20 mm - Web plate thickness: 5 mm (to DIN 2768-1 tolerances) - Tack position: trough position, 45 degrees - Changeover time per beam pair: max. 10 minutes - Total unit length: 14,300 mm - 28 servo motors for individual height adjustment of beam supports - Rotatable base frame: 0 to 45 degrees - Permanent magnet clamping of the top flange - Siemens S7 control system - Touch screen operator interface - NC axis with programmable software switch ...

Progress M-System Mesh Welding Machine, Type EVOLUTION 2012 Complete mesh welding system for the production of customised reinforcement mesh from straightened wires. Main Components MMR straightening machine with 6 wire lines SWR welding machine with 6 welding heads Technical Data Maximum mesh size: Width: up to 3,500 mm Length: up to 9,000 mm Wire diameters: Longitudinal and cross wires: 6, 8, 10, 12 and 16 mm Mesh dimensions: Maximum width: 3,500 mm Maximum length: 9,000 mm Minimum width: 500 mm Minimum length: 1,000 mm Bar dimensions and accuracy: Maximum bar length: 9,000 mm Minimum bar length: 500 mm Bar length tolerance: ±5 mm Bar placing accuracy: ±10 mm Description The Progress M-System EVOLUTION 2012 is designed for the flexible production of customised reinforcement mesh in a wide range of grid patterns, dimensions and wire diameter ...

Offer 25338 Technical data: - Length 1300 mm - Width 800 mm - Top height 215 mm - Wall thickness 15 mm - Hole diameter of the holes approx. 28 mm - Center distance of the perforations each approx. 100 mm - Table height approx. 970 mm - Total weight approx. 400 kg

WE HEBBEN 46 KEER: EuroScaffold rolsteigerframe 75 × 28 × 7 × 6 keer EuroScaffold steigerplatform 190 cm met luik X 2 KEER EuroScaffold leuningframe AGS Pro 190 cm x 1 keer EuroScaffold horizontale schoor 190 cm x 4 keer EuroScaffold diagonale schoor 190 cm x 6 keer Steigerwiel Ø200 mm met stalen as, 500 kg, nylon X 4 TIMES Steiger telescopische stabilisator 200 cm x 2 keer EuroScaffold aluminium kantplankenset X 1 TIME Leuningklemmen X 8 KEER TOTAAL Gewicht: 153 KG x 46 = 7000 KG EN Verstelbare stabilisatoren 200 x 92 keer TOTAAL Gewicht: 9 kg x 92 = 828 kg

Manufacturer: 3D Systems Model: nextdent 5100 Year of Manufacture: 2023 Type of Machine : 3D Printing Machine Find more here - .ucymachines/ Contact us at - sales@ucymachines