sm 74 5 used for sale

SMI Pack FP560 L sealer 6114 sealing bars 560mm x 560mm, automatic outfeed conveyor, with aplhanumeric LCD control panel

24 months warranty TOP value for money Solid, movable baguette long roller, mounted on a mobile frame with caps lock wheels Capacity: 50 g - 1200 g, 1200 pieces per hour Roll width: up to 75 cm on retractable felt rolling belt Mechanical adjustment of Ausroll properties Dimensions in cm: 105 x 69 x 153 (WxDxH) Height of the machine without frame: approx. 70 cm, Engine power: 0.55 kW 380V - 3Ph - 50 Hz - 16A-CEE connector Weight: 258 kg Price incl. mobile base --- Alternative as stainless steel model: SM-380S (machine completely in stainless steel): Price: 5.220,-- incl. mobile frame

Te Coop: SMC luchtsturingskleppen ECC 512 M met 10 aansluitingen by blok

Te Coop: SMC luchtsturings kleppen VFS 2110 met 10 aansluitingen by blok

Te Coop: SMC Luchtsturings kleppen VFS 2110 met 14 aansluitingen by blok

swing diameter: 125 mm centre height: 400 mm weight of the machine ca.: 150 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Smicon PT 1500 Fumigation / Fumigation System In a fumigation, a room is flooded with a poisonous gas to fight pests / bacteria. Because they are toxic gases, special safety measures are required. Fumigations are common in the storage of organic materials (eg grain storage, in warehouses of harbors, silos, mills), in addition, in churches to control the woodworm. It is a device which is used for the disinfection of rooms. Formaldehyde is boiled on the left-hand cooking plate and placed in a stream of air in a room together with condensed water (right hearth) to kill all the bacteria. Former list price 9.900EUR

SMEVA 48 M2 Product number:M18-7071 Cooling capacity:0,001 kW Dimensions:8000 x 6000 x 2480 mm Number in stock:1 piece(s) Price:Quotation request Very nice Smeva cold room of 48 m2, two entrance doors, 5 drawer kabinets and 10 glass doors (5 frames). Visit also our website: used-refrigeration

SMEVA 27 M2 Product number:M18-7070 Cooling capacity:0.001 kW Dimensions:9000 x 3000 x 2780 mm Number in stock:1 piece(s) Price:Quotation request Very nice Smeva cold store with two rooms (15 m2 and 12 m2), an entrance door per room and 10 glass doors (4 frames). Visit also our website: used-refrigeration

1 unused flail mower shaft to Dücker SMT 15

Technical data:-Roll diameter 420 mm -Throat depth 410 mm -Max volume height 265 mm -Table size 600 x 600 mm -Table li. + re. Tiltable 15 / 30 ° -Table height 1020 mm -Blade length 3150-3260 mm -Saw band width 3-16 mm -8 speeds 12-375 m / min -Drive: 400 V / 1.1 / 1.7 kW -Weight approx. 650 kg -Space requirement approx. B 900 x H 1900 X 1000 mm -with: - blade welding machine in the machine base - grinding wheel and lamp -Scissors, air pump and lighting

Sharping machine for endless abrasive belts. The subsequent endless abrasive belts be sloping ground at the various stations. At the last station of the contact cement is then applied.

Collette SM200 high speed bowl mixers 200L, stainless bowl and mixer attachment, brand new unitronics HMI + PLC controls

Turning Diameter 400 mm Turning Lenght 650 mm With C ,Y axes and subspindle Control Unit Fanuc 31i Can be inspected under power

Form-on smartPROP 20 sF2 - 2,00 - 3,50m, new a 33,95€ net -low weight -long service life -safe working Your benefits: Effortless and fast work due to the low dead weight Preservation of the value of the support over many years thanks to high-quality production and galvanizing Safe working thanks to crushing and Failover Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Phone 07305/9562350, Fax. 07305/9562352 mobile: 0049 176 70044689 Mr. Becker Office/ warehouse address: Birkenstrasse 15 D-89185 Humlangen-Hüttisheim e-mail: sfsystemst-online.de Register court Ulm: HRA722943 VAT ID NO: DE279047055

ZOLLER SMILE / PILOT 3.0 presetting and measuring machine was manufactured in 2019 in Germany. The machine is a professional tool measuring and presetting device, whose easy operation and precision guarantee flawless results. A telecentric lens and a CCD camera with integrated LED ring for measurements in reflected light (blade inspection) are used to perform the measurements. ZOLLER SMILE 420 is equipped with the CNC controller ZOLLER »pilot 3.0« and functions such as automatic blade recognition, measurement of radial run-out and axial run-out, maximum contour function and cutting edge control. The tool to be measured can have a maximum length of 420 mm and a maximum diameter of 420 mm. Specifications of the ZOLLER SMILE / PILOT 3.0 presetting and measuring machine - maximum tool length Z: 420 mm - maximum tool diameter D: 420 mm - diameter measurement according to Abbe’s p ...

Equipment / Additional information: JEWA Flexo Rotonir SM52: M.No.: 02010-0017 BALDWIN: Typ: FK-1-500 // Serien No.: 151166 // Art.- No: 150.01.0001

SMG DS 315-1500/1300 CNC hydraulic press was manufactured in 1984 in Germany. The machine, consisting of two interconnected stations, is used for pressing metal workpieces in manual, semi-automatic and automatic mode with a pressing force of up to 315 tonnes. All the machine’s machining parameters are set using a CNC control with a full-colour, touchscreen display. The press is equipped with a hydraulic and pneumatic sheet metal feeder, servo drives for feed rollers to set a very precise stroke of up to 0.1 mm, safety cages and workpiece feed and drop control sensors. The SMG 315 T machine underwent a complete overhaul in 2007, during which components such as pumps and safety installations were replaced. Technical data of the SMG DS 315-1500/1300 press - maximum press force: 315 t - working table dimensions (L x W): 1500 x 1300 mm - upper machine point (from the table): 750 mm ...

Conductive transmitter; Conductivity meter for bottle cleaning machines. Used from warehouse dissolution. Very good condition see photos

consisting of: 12-head rinser 12-head long-tube beer filler 4-head crown corker capacity: 2200 bph

We offer a used SMC Carousel mini load of the manufacturer SSI Schaefer for sale. Specifications: Powerful modular shelving system for small goods (miniload), 68 container racks with 12 levels per carousel Container 600x400x310mm, weight 30kg (not included) 1040 transport units per hour Approx. 3,264 memory locations The entire system (miniload, flow racks, sorting system) consists of 4 carousels Length per carousel approx. 15 m, height approx. 4.5 m Total area approx. 320 m2 Maximum walking speed 0.6 m/s, Machine location: 89-600 Chojnice/Poland Machine is dismantled, stored dry and ready for shipping. If you are interested, please contact us: +48601553406 or biuroregalux.pl

Tables for hydrsulic press for clamping on the stump or for the edition on the table. Multiple available. The tables are from a 420to press with installation height 1,250mm The round tables have a continuous opening in the middle. More data and photos on request

Strapping machine SMB SM1-600; good condition; cleaned and tested; Frame size 600x600mm; Bandwidth 5mm; Core diameter 200mm; Power max.42 Strappings/min.; suitable for PP-band 5mm DIN 55535; Stand-up device; Footswitch. Strapping machine SMB SM1-600; good condition; cleaned and checked; frame size 600x600mm; band width 5mm; core diameter 200mm; speed up to 42 straps/min.; used for PP-band DIN55535; floor mounted machine; foot switch.

New device 24 months warranty Advantages: + no power connection required, maintenance-free + space-saving, fits even in the smallest bakery + easy to maintain, robust design + with round dough tub + even, manual division of the dough + lacquered frame + fast spare parts supply within 1-2 working days SERIEN accessories, included in the price: + 2 dough dividing tubs, in which the doughs are divided / punched Specifications: - Dimensions device: 450 x 860 x 2150 mm (WxDxH) with lever - Dimensions dough dividing tray: ø 380 mm, height 60 mm - Working height: approx. 90 cm - Divisions: 30 pieces of dough - Unit weight: 50 - 170 grams (depending on dough) - Dough insert: 1,500 - 5,100 grams (depending on dough) - Net weight: 130 kg

-Max pressure at the end of stroke – 4000 ton -Press stroke – 400 mm -Number of stroke – 50 per minute -Max distance of stroke from the table – 1400 mm -Dimensions of slider: 1320 x 1320 mm -Bed dimensions: 1120 x 1600 mm -Bed movement by height – 20 mm -Max pressure of upper ejector – 20 t -Max stroke of upper ejector – 65 mm -Max pressure of lower ejector – 40t -Max stroke of lower ejector – 80 mm -Main motor power – 225 kW -Main motor speed – 730 rpm -Total width — 6280 mm -Total depth – 4885 mm -Total height – 8870 mm -Height over the bed – 7315 mm -Total net weight – 280 092 kg

Qty. 1 Second-hand steel strip production plant Mfc.: NKK, SMS, Bricmont, Siemens, Woo Jin Inc., Kum Soo Ind., Yong Woon Heavy Ind., Affival, Chun Yang, Sumitomo Heavy Ind., Primetals, Toshiba, Sungmyung Eng., Kiheung, Hyundai Steel, Dosan, Kobe, Yaskaawa, IMS, ABB Built: 1995 – 2018 Production plant weight: approx. 50,000 T Slab dimensions: 55 mm x 900~1,560 mm x 20,000~43,000 mm - T x W x L Strip dimensions: 1.4~16 mm x 900~1,560 mm – Coil weight: 28 ton Scope of supply: EAF A EAF B Ladle Furnace Continuous Caster Soaking Pit Descaler Hot Rolling Mill Cooling Unit Coiler Skin Pass Mill Equalizer EAF A Built: 1995 – 2005 Stopped in 2011 EAF B Built: 1995 – 2005 Stopped in 2020 Caster & Rolling Mill Built: 1995 -2005 Stopped in 2020 Capacity (slab) 1.8 MT /annum (A & B combined) Slab dimensions: 55 x 900-1,560 x 20,000-43,000 mm T x W x L  ...

CNC CONTROL: MSD 501 II, FANUC FEATURES: DIAMETER ADMITTED ON THE BED, MM 680 MAXIMUM TURNING DIAMETER 440 MM N1 MAXIMUM TREATMENT DIAMETER N2 322 MM MAXIMUM TURNING LENGTH, MM 471 THE STANDARD MACHINING DIAMETER MM170 MAIN SPINDLE: STEP PANEL 45 MM COUNTER SPINDLE: HOLE PITCH LINE 43 MM TURRET 1: POSITION N12 ALL MOTORIZED TOWER 2: POSITION N12 ALL MOTORIZED

Qty. 1 Second-hand extrusion press including log furnace Mfc.: SMS Built: 1986 Force: 960 MT (9.3 MN) Press jaw: Wide: 155 mm Height: 140 mm Max. inlet: 130 mm (144 mm block, 5 mm protection per side) Recipient: 149,9 mm Extras: Heatable tool cassette from Marx (installed 2016) Conversion of recipient to resistance heating (beginning of 2016) Punch press disc: 149,2 mm Broaching disc: 150 mm Billet Ø: 144 mm Length: 265 – 540 mm Log length: 3000-4800 mm Log Furnace Mfc.: Extrutec GmbH Built: Temperature: 480-520 °C Zone 1: 460-490 °C Zone 2: 440-470 °C Zone 3: 400-450 °C Table weight: Max. 1350 g/m Min. 80 g/m Electrical control cabinet Puller Exhausting system Cooling device Spare parts for furnace combustion air Spare parts head burner Spare parts oven stove bo ...

Compact and fast strapping machine with maximum package dimensions of approx. width 600 x height 600 mm from a renowned German manufacturer, designed for high speed and trouble-free operation. Equipped with an ergonomic and uncomplicated bobbin changing and threading system. -Closure type: Welding using the hot wedge method. -Up to approx. 48 straps per minute. -Tape type: PP tape. -Bandwidth 5-9 mm adjustable: Set to 5 mm. -Belt tension adjustable on the operating terminal. -Soft tension possible. -Standby function/power saving mode. -Stable foot pedal. -Low-maintenance and low-wear belt frame. -Sliding and lockable via castors. The machine can be demonstrated under electricity.

The extrusion line was designed for cast film production. Processing of thermo plastics in a temperature range of 150-300°C. POSSIBLE LAYER STRUCTURES: - mono film
 - 3- layer (A-B+C-A) - 5- layer (A-B-C-B-A) DATA OF FACILITY Total output of extruders max. 2230 kg/h Extruder A: 90/33 L/D max. 330 kg/h Extruder B.: 135/33 L/D max. 950 kg/h Extruder C.: 135/33 L/D max. 950 kg/h Film width range (net): 1600 - 2110 mm Two rolls cutting possible (2x 800 – 2x 1055mm) Thickness range: 25-580μm Production speed: 10 - 150m/min Roll width: 2500 mm Max. roll weight: 2000kg ADDITIONAL COMPONENTS (QUALITY): Non-contact thickness equipment for automatic TD profile measurement with double side corona treatment (max. 12000W) Optical inspection system, including marker system if failures are detected, incident and transmitted light system  ...

Qty. 1 Second-hand slab manipulator Mfc.: SMM Built: 2009 Slab dimensions: Length: 2000-3200 mm Width: 720 – 1450 mm Thickness: 320 – 406 mm Drive power: 55 kW, 400 V

Pneumatic riener for ship rivets Comes with the following accessories, 1 x impact bolt for round head 16 mm 1 x impact bolt for round head 22 mm

New machine 24-month warranty Benefits: + Solid construction + Boiler, central rod and spiral made of stainless steel + Flour dust hood closes gently with dampers, with auto shut-off + mobile machine, on swivel wheels, with fixed boiler + Dirt protection cladding for adjustable feet + short kneading time with excellent result + Switches for manual or automatic operation + 3 timers + 1 reverse gear for mixing, 2 forward gears for kneading + fast spare parts supply within 1-2 business days Technical data: - Flour capacity: 2 - 15 kg - Dough capacity: 3 - 25 kg - Boiler volume: approx. 40 litres - Boiler outer edge: 480 mm - Motor power: 2.2 kW (kneading spiral & boiler drive) - rpm at 50Hz (1st / 2nd gear): 140 / 280 - Connection values: 400V - 3Ph - 50Hz - 16A CEE plug - Dimensions in cm: 56 x 81 x 113 (WxDxH) - Height when flour dust hood opened: 140 cm - Net w ...

New machine BÄKO SPECIAL OFFER with 3 year warranty BÄKO Item No. 821189 Benefits: + TOP value for money + robust, mobile socket roll-out machine + Operation with lever sand sand sands and pedals possible + suitable for all types of dough for rolling out and touring + PVC conveyor belts, easy and quick to clean + therefore even suitable for marzipan and roll fondant + integrated electric motor + large digital display of the roller setting, instead of a mm scale on the lever + Tables can be folded up on the left and right + Scrapers can be easily removed without tools + Machine is equipped with 1 hand reel as standard + Dough collection sheets made of stainless steel, on both sides of the table, pull-out + fast spare parts supply within 1-2 business days Technical data: - Bandwidth: 650 mm - Table length: 1,320 mm each = 2,640 mm - Roller adjustment: from 0.5 mm  ...

New machine Stainless steel model 24-month warranty Properties: + TOP value for money + Solid cone round wire in stainless steel version + with control panel and automatic flour spreader + Model "S", suitable for small dough pieces (approx. 100 - 350 gr) + optimally suited for wheat dough up to a TA of approx. 170 (depending on the dough) + extra long rounding/running distance of 6 meters for best round ingestion properties + gutters and cones are teflon-coated + Base is mobile and also available in stainless steel + mounted on robust rollers with fixed SPECIAL equipment (not retrofittable!): - Blower / ventilation of the gutters and cone (recommended for dough with TA > 155): + EUR 1,745,-- Technical data: Weight range: 100 - 350 grams (dough/product dependent) Hourly output: approx. 1,800 pieces (dough/product dependent) Orbit: 6 meters Dimensions: 105 x 105  ...

New machine Stainless steel model 24-month warranty Properties: + TOP value for money + Solid cone round wire in stainless steel version + with control panel and automatic flour spreader + suitable for medium-sized dough pieces (approx. 300 - 1,100 gr) + optimally suited for wheat dough up to a TA of approx. 170 (depending on the dough) + extra long rounding/running distance of 6 meters for best round ingestion properties + gutters and cones are teflon-coated + Base is mobile and also available in stainless steel + mounted on robust rollers with fixed SPECIAL equipment (not retrofittable!): - Blower / ventilation of the gutters and cone (recommended for dough with TA > 155): + EUR 1,745,-- Technical data: Weight range: 300 - 1100 grams (dough/product dependent) Hourly output: approx. 1,800 pieces (dough/product dependent) Orbit: 6 meters Dimensions: 105 x 105 x ...