We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
122,046 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Pneumatic cylinders, variant cylinders, round cylinders, double-acting SMC CD85N25-200-B stroke: 200 mm Piston diameter: Ø 25 mm Rod diameter: Ø 10 mm Rod thread: M10 x 1,25, Length: 20 mm pmax: 1.0 MPa ( 10 bar ) Mounting thread: M22 x 1.5, length: 20 mm Mounting socket: Ø 8 mm, length: 16 mm New ! Dimensions: 340 x 30 x 30 mm
Qty. 1 Second-hand extrusion press Mfc.: SMS – Schloemann Built: 1997 Force: 2200 MT Type: direct Operation pressure: 250 bar Billet dia.: 8” – 203 mm Length: 900 mm Force Main piston: 19.64 MN Feeding piston: 2.45 MN Retreat force: 1.18 MN Press stroke: 2100 mm Press speed: at force 22 MN (250 bar) up to 19.0 mm/sec. At force 15.4 MN (175 bar) up to 26 mm/sec.
Qty. 1 Second-hand extrusion press Mfc.: SMS - Hasenclever Force: 2500 MT Built: 1990 Container for flat billets Width: 375 mm Height: 140 mm Billet length: 1000 mm Stem length, max.: 950 mm Consist of: Extrusion Press Body Cylinders Motors Hydraulic tank Qty. 2 Containers (8” & 9”)
used
Compact cylinder, pneumatic cylinder, double-acting, 2 pieces SMC CDQ2B32-25DMZ Piston diameter: Ø 32 mm stroke: 25 mm rod diameter: Ø 16 mm rod thread: M14 x 1,5, Length: 22mm max. 1.0MPa (10 bar) New ! Dimensions: 87 x 45 x 50 mm
used
Compact sled SMC MXP16-20B stroke 20 mm 0.15 - 0.7 MPa ( 1.5 - 7 bar ) Piston diameter: Ø 16 mm Slide: 40 x 45 mm used, tested ! Dimensions: 110 x 80 x 50 mm
used
Throttle check valve, 5 pieces SMC AS 2200F Hose diameter: Ø 4 mm Thread: G3/8 New ! Dimensions( packaging ): 140 x 140 x 30 mm
used
Compact cylinder, pneumatic cylinder, double-acting SMC CQ2B40TF-25DZ Piston diameter: Ø 40 mm stroke: 25 mm rod diameter: Ø 16 mm rod thread ( inside ): M8 x 1,25, length: 15 mm max. 1.0 MPa ( 10 bar ) New ! Dimensions: 61 x 52 x 57 mm
used
Pneumatic cylinders, standard cylinders, round cylinders, double-acting SMC CDG1FA25-240Z stroke: 240 mm piston diameter: Ø 25 mm rod diameter: Ø 10 mm rod thread: M10 x 1,25, Length: 22 mm pmax: 1.0 MPa ( 10 bar ) New ! Dimensions: 350 x 31 x 31 mm
used
pneumatic cylinders, standard cylinders, round cylinders, double-acting, with position sensors SMC CDG1BA20-210Z-M9BWL stroke: 210 mm piston diameter: Ø 20 mm rod diameter: Ø 8 mm rod thread: M8 x 1,25, Length: 16 mm pmax: 1.0 MPa ( 10 bar ) New ! Dimensions: 325 x 26 x 26 mm
used
pneumatic cylinders, standard cylinders, round cylinders, double-acting SMC CDG1BA20-210Z-M9BWL stroke: 210 mm piston diameter: Ø 20 mm rod diameter: Ø 8 mm rod thread: M8 x 1,25, Length: 16 mm pmax: 1.0 MPa ( 10 bar ) New ! Dimensions: 325 x 26 x 26 mm
used
2-finger parallel gripper, single-acting (closed without pressure) SMC MHZ2-20C stroke: 2x 4 mm piston diameter: Ø 20 mm pmax: 0.25 - 0.7 MPa ( 2.5 - 7.0 bar ) New ! Dimensions: 85 x 50 x 27 mm
used
2-finger parallel gripper, single-acting (closed without pressure) SMC MHZ2-20C stroke: 2x 4 mm piston diameter: Ø 20 mm pmax: 0.25 - 0.7 MPa ( 2.5 - 7.0 bar ) used, tested ! Dimensions: 85 x 50 x 27 mm
used
Pneumatic cylinders, standard cylinders, round cylinders, double-acting, with position sensors SMC CDG1BA20-240Z-H7BL CDG1BA20-240Z Hub: 240 mm piston diameter: Ø 20 mm rod diameter: Ø 8 mm rod thread: M8 x 1.25, length: 16 mm pmax: 1,1,0 MPa ( 10 bar ) New ! Dimensions: 355 x 38 x 27 mm
used
Compact cylinder, pneumatic cylinder, double-acting, with guide rods SMC MGPM40TF-200Z Piston diameter: Ø 40 mm stroke: 200 mm rod diameter: Ø 14 mm guide rod diameter: Ø 20 mm yoke plate: 118 x 44 x 10 mm max. 1,0 MPa ( 10 bar ) New ! Dimensions: 295 x 120 x 54 mm
used
Compact cylinder, pneumatic cylinder, double-acting, with guide rods SMC MGPL32TF-200Z Piston diameter: Ø 32 mm stroke: 200 mm rod diameter: Ø 14 mm guide rod diameter: Ø 16 mm yoke plate: 110 x 44 x 10 mm max. 1,0 MPa ( 10 bar ) New ! Dimensions: 317 x 113 x 48 mm
used
Compact cylinder, pneumatic cylinder, double-acting, with guide rods SMC MGPM25TF-175Z Piston diameter: Ø 25 mm stroke: 200 mm rod diameter: Ø 10 mm guide rod diameter: Ø 16 mm yoke plate: 91 x 38 x 9 mm max. 1,0 MPa ( 10 bar ) New ! Dimensions: 277 x 93 x 42 mm
1 x Smit 660mm dia x 2100mm wide two roll mill, Rebuilt 2005, manual nip adjustment, Lunn type safety bars, Back roll surface fluted, Front roll smooth finish. Bush type bearings with flood lubrication, compact \Jahnel\ right angle drive gearbox. with 180KW DC variable speed motor and controls. Strip knives to front roll. Heavy duty 2 part bedplate. Extra Information: Front roll 29 teeth Back (fluted roll) 32 teeth Friction ratio 1:1.1 Motor 180kW DC variable speed, 1300rpm, Gear box ratio 1:9.8 Bullgear 122 teeth, Pinion gear 18 teeth (Ratio 1:6.777) Therefore approx roll speeds as follows: Input motor speed 1300rpm: Front roll 21.53 rpm Back (fluted) roll 19.6 rpm
used
SMA-inverter sunny boy 2500 Built in 2002
new
CNC control: FANUC 0i-TF+ with 15" LCD color display and Manual Guide i -12-fold tool turret with BMT45 holders, 24-fold indexing -Coolant device with 10 bar delivery pressure incl. coolant gun -WTO Holder Package -Oil skimmer with endless belt for extraneous oil separation -Warning light with 3 colors -Workspace lighting -Bar feeder interface for connecting loading magazines -Chip conveyor, ejection right -Part ejector on counter spindle incl. cooling by the spindle -Chuck blow-out device on the counter spindle -Parts catcher with parts conveyor belt inside -Automatic surveying arm -Transformer -CE conformity -English machine manuals -Main spindle: 3-jaw power chuck Ø210 mm (8") for spindle head standard: A2-6; Make: SAMCHULLY incl. 1 set of soft and 1 set of hard jaws -Counter spindle: 3-jaw power chuck Ø135 mm (5") for spindle head standard: Flat-110; Make: SAMCHU ...
new
CNC control: FANUC 0i-TF+ with 10.4"/15" LCD color display and Manual Guide i -12-fold tool turret with BMT65 mounts -Coolant device with 10 bar delivery pressure incl. coolant gun -WTO Holder Package -Oil skimmer with endless belt for extraneous oil separation -Warning light with 3 colors -Workspace lighting -Bar feeder interface for connecting loading magazines -Chip conveyor, ejection right -Part ejector on counter spindle incl. cooling by the spindle -Chuck blow-out device on the main spindle -Parts catcher with collection box -Automatic surveying arm -Transformer -CE conformity -English machine manuals -3-jaw power chuck Ø210 mm (8") for spindle head standard: A2-6; Make: SAMCHULLY incl. 1 set of soft and 1 set of hard jaws -Counter spindle 8": 3-jaw power chuck Ø170 mm (6") for spindle head standard: A2-5; Make: SAMCHULLY, incl. 1 set of soft and 1 set of hard ...
used
used
For sale: Air control valve 14 connections per block Order number: 3102.1 For more information, please call or send an email. Phone: 06-20758459 Email: wh.derikx@gmail.com The price is plus 21% VAT.
used
Inv. Num. : 4164 Type: LKT 250 Producer: SMERAL Created: 1977 Parameters: Pressing force: 250 t Table: 1575 x 1150 mm plunger stroke: 250 mm Stroke: 20/min Plunger adjustment: 100 mm Installation height: 750 mm Shock dimensions: 1380 x 850 mm Motor power: 28 kW Dimensions 2800 x 1240 x 4450 mm Machine weight: 23400 kg
used
used
SMS Leveller YOM: 1990 Model: 3-13-2000 Max Strip width: 2030 mm Max Thickness: 13 mm 11 Rolls, diam.: 125/115 mm; 154 Back-Up Rolls, diam: 130 mm Max opening (gap): 100 mm Speed: 30/45 M/Min; Leveling Pressure: 6.500 kN; Main drive: 0-199kW
used
Used SMG HZPUX 350/200 - 1500/1300 moulding press in good condition! Main technical data: - Power: 510 ton - Maximum span with castle: 1460 mm - Minimum light with castle: 520 mm - Maximum span without castle: 2160 mm - Minimum light without castle: 1220 mm
used
x-travel: 300 mm y-travel: 150 mm z-travel: 150 mm software: Measure Mind Plus System: Windows 95 weight of the machine ca.: ca. 0,12 t Video Measuring System Software diskette from Measure Mind Software Win 95 is up to date Last calibration on 01/24/2017 monitor joystick keyboard and mouse documents of the size fully functional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Inv. Num. : 6606 Type: LDC 250 Producer: SMERAL Created: 1980 Parameters: Compressive force: 250 t Maximum stroke rate upper table: 38 1/min Ram stroke: 200 mm Adjustment of the plunger: 120 mm
used
year 1985 Capacity 2500 / 2750 Ton 24900 / 27400 kN Speed 65 SPM, continuous mode Ram/Slide Stroke 12.60in, 320.00mm Ram/Slide Adjustment 0.39in, 10.00mm Shut Height (Ram / Slide Down, Adjustment Up) 35.60in, 905.00mm Stroke of Upper Knockout 2.00in, 50.00mm Stroke of Lower Knockout 2.80in, 70.00mm Ram/Slide Width 52.00 in, 1320.00 mm Ram/Slide Height 43.00 in, 1100.00 mm Bed Width 53.00 in, 1340.00 mm Bed Depth 55.00 in, 1400.00 mm power Existing Additional 28 Strokes per minute in manual mode, height shown is above floor, total height is 291 in ( 7390 mm), new quick change hydraulic type bolster Machine Length 160.00 in, 4055.00 mm Machine Width 157.00 in, 4000.00 mm machine height 264.00 in, 6710.00 mm Weight 320000 lbs, 145455 kg Condition Excellent Currently disassembled an ...
used
Smec SL 2000M CNC Lathe with c axis Machine is like new condition Machine has been used only 4 months Fanuc control unit
used
This SMERAL LKT 250D Stamping machine was manufactured in the year 2019 in Czech Republic. It is equipped with a MINI control unit.
used
This SMEC PL 2000Y Lathe was made in 2014 in Korea and has 14309 production hours, of which 4261 are spindle hours. It is equipped with a Fanuc Series Oi-TD control unit. The machine has a spindle speed of 4000 rpm.
used
SMEC-SL2500LY Tower - 4 Axes BMT-65 turret for 25mm square tools and Ø50 boring bar tools turning at 5000 rpm - 5.5 kW 10 bar coolant Siemens 828D control - with Manual Guide i Hydraulic chuck 2 axial rotary tool holders 2 radial rotary tool holders Motorized tailstock Automatic tool feeler
used
The machine is in good technical condition. Max. sheet length: 2050 mm Max. sheet thickness: 4 mm By prior arrangement, the possibility of a tour in progress.
used
The machine is in good technical condition. Max. length of bent material: 2050mm Max. strength of bent material: 4mm 7.5 - 2.2KW Weight: 4050kg By prior arrangement, the possibility of a tour in progress.
used
diameter: 630 mm inner taper: . mm hollow: 250 mm Thickness: . mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m 3 jaw chuck hole circle approx. 235 mmThe technical. Data are manufacturer or operator information and are therefore non-binding. We reserve the right to make an interim sale, Our terms and conditions of business and sales apply exclusively. About us More than 400 of our own machines in the warehouse Over 12,000 m² of storage space, crane capacity 70 tons More than 1000 items Accessories for your workshop If you want to sell machines production lines or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Wedge bar chucks, power chucks, three-jaw chucks, three-jaw lathe chucks -Chuck size: Ø 200 mm -interchangeable jaws -Cone: 69 mm -Thread: M 95 x 4.5 mm -Weight: 26 kg
used
PLC workstation, communication cable, communication programming cable, connection cable, interface cable -Manufacturer: SMC Pneumatics, connection cable interface cable unused original packaging -Type: ECC-PNAL-232CAB -Dimensions cardboard: 180/100/H35 mm -Weight: 0.1 kg
used
4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Spare parts: for hydraulic power chucks different types -Chuck size: Ø 210 mm -Weight: 124.2 kg
used
4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Condition: hydraulic power chuck unused -Tensioning force: max 20 KN -Equipment: with soft interchangeable jaws -Chuck size: Ø 210 mm -Weight: 30.9 kg
used
Wedge bar chucks, power chucks, three-jaw chucks, three-jaw lathe chucks -Chuck size: Ø 220 mm -Taper cone: Ø mm -Mounting hole circle: mm -Through hole: 50 mm -Exchangeable jaws: -Weight: 25 kg
used
Hydraulic pump, oil pump, gear pump -Pumps: are unused -Content: approx. 20 l -Electric: 24 V 3,000 W. -Working pressure: 140 bar -Number: 19x pumps available -Price: per piece -Dimensions: 900/175/H210 mm -Weight: 24 kg
used
Qty. 1 Second-hand extrusion press line Mfc.: SMS Schloeman, Junker, Allen Bradley Type: Direct press Built: 1987 Force: 2800 MT Billet dia.: 228 mm – 9” Length: 250-1000 mm Consist of: Logs Loading Table Logs Furnace Hot Shear Induction Heater Extrusion Press Pullers (2) Quenching Unit Hot Saw Run-out Table Stretcher Finishing Saw Aging Oven
used
CNC machining center In very good condition. Currently in operation. Machine table - Grid table Max speed 18000rpm ISO 30 tool clamping system Main motor 7.5 Kw Horizontal wick X 4 horizontal wick Y 2 One Chafe Construction Type Safety device - bumper
used
Crank press SMERAL LKT 250A
used
SMITEC COSMOS 2000 Digital Servo Drive / Servodriv NEW Quantity: 2 pieces Price: 2500 per piece
used
The winder is part of a cast film system and is in good condition. Max. foil width = 2350 mm Max. roll width at inlet = 2600 mm, Max diameter roll = 980 mm Sleeve size 3", 6 Film thickness= 15 – 200 my, Max. speed = 250 m/min Edge trimming with razor blades, The winding can be in contact or gap Automatic loading of 3 inch sleeves from the sleeve magazine. Automatic unloading of the finished roll by means of a robot.
used
The press has been completely renovated. Scope of work: cleaning and repainting of the body and covers, regeneration of clutch wheel disc linings, new pneumatic installation, new electrical installation, new control (Fiessler FMSC controllers, Siemens control panel, foot limit switch), installation of feet, new user manual and documented modernization history. Original documentation available. Pressure: 25 tons Max. number of strokes/min: 125 Slider stroke: 8-60mm Slider adjustment range: 55mm Weight: 1400 kg
new
SMERAL LZK 2500 Hot Forging press Fully refurbished in 2024 Capacity: 2500 Ton Speed: 65 SPM, continuous mode Ram/Slide Stroke: 320.00mm Ram/Slide Adjustment: 10.00mm Shut Height (Ram/Slide Down, Adjustment Up): 905.00mm Stroke of Upper Knockout: 50.00mm Stroke of Lower Knockout: 70.00mm Ram/Slide Width: 1320.00 mm Ram/Slide Height: 1100.00 mm Bed Width: 1340.00 mm Bed Depth: 1400.00 mm Power: 130kW Machine Length: 4055.00 mm Machine Width: 4000.00 mm Machine Height: 6710.00 mm Weight: 140000 kg Condition: like new refurbishing report: 1. Mechanical part • Complete disassembly of the press. • Measurement and troubleshooting of all parts. • The main parts of the press are tested (without destruction) in order to identify any defects. Frame: The frame was inspected and non-destructive testing of the most loaded areas was carried out. Damage to the table pl ...
used
SMAG GALAXIE 2005 3 colours Screen printing + Hot Foil + Flat Bed Die Cutter SMAG GALAXIE 2005 3 colours Screen printing + Hot Foil + Flat Bed Die Cutter 3 Screen printing units 3 UV dryers 1 hot foil stamping unit 1 Flat bed die cutter Slitting unit Splicing table Web guide Waste Rewinder Manufacturer: SMAG GRAPHIQUE Type: Galaxie 2005 Year of manufacturing: 1999 Web width: 330 mm Printing width: 330 mm Machine is available in February – can be seen in production