136,827 used machines on RESALE, but how to find them? Machine Search
max. ram stroke: - mm throat: - mm table diameter: - mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Power supply: 220V, 1 ph, 50 Hz, Total electrical power: 1,1 kW, Water slot milling spindle motors: 2 x 0,55 kW / 220 V / 3ph / 300 Hz, Air consumption: 9 lt/min, Air pressure: 6-8 bar, Min. machinable profile height: 40 mm, Max. machinable profile height: 120 mm, Max. machinable profile width: 150 mm. Auction-ID: A1-50595-38
Used slot mortiser (slot mortising / boring machine). Condition: - Used machine - Has not been operated for years; needs inspection before use Auction-ID: A7-50988-142
General Description Universal tool milling machine manufactured by DNT Kaunas (Lithuania), designed for precision milling, drilling, slotting and toolroom machining. The machine is equipped with a vertical spindle, rotary dividing table and tilting work table, making it suitable for versatile machining operations. Technical Details Manufacturer: DNT Kaunas Machine type: Universal tool milling machine Year: Not confirmed Spindle speeds: 145 / 290 / 580 / 725 / 1,450 / 2,900 rpm Vertical spindle Rotary dividing table included Tilting work table included Longitudinal power feed Machine work light Coolant splash guard Condition Fair to good used condition. The machine appears mechanically complete with rotary dividing table, tilting work table, power feed and spindle assembly installed. Cosmetic paint wear and light surface corrosion are visible, consistent with industrial ...
General Description Universal external cylindrical grinding machine manufactured by WMW Glauchau (former East Germany). Designed for precision external cylindrical and tapered grinding of shafts and other rotational workpieces. The machine is equipped for grinding between centres or in a chuck. Technical Details Manufacturer: WMW Glauchau Machine type: Universal external cylindrical grinding machine Year: Not confirmed Grinding wheel diameter: 315 mm Maximum grinding wheel speed: 1,800 rpm 315 mm 3-jaw chuck included Universal workhead Tailstock Hydraulic reciprocating table Grinding wheel guard Coolant system Separate electrical control cabinet Condition Used industrial condition. The machine appears complete with 315 mm three-jaw chuck, workhead, tailstock, grinding wheel, hydraulic table, coolant system and electrical cabinet installed. Normal cosmetic wear and si ...
Technical details Type: Vertical slotting machine Configuration: - Vertical reciprocating ram - Adjustable ram stroke - Large T-slotted worktable - Longitudinal and cross manual feeds - Automatic table feed controls - Mechanical feed gearbox - Electrical push-button controls - Heavy-duty cast-iron frame Application: - Internal keyway machining - Slot machining - Internal spline machining - Internal profile machining - Flat surface machining - General metalworking Construction: - Conventional mechanical operation - Vertical ram drive - Integrated gearbox Dimensions: - Length: Approx. 2100 mm - Width: Approx. 1700 mm - Height: Approx. 2600 mm Weight: Approx. 5000 kg Condition: Used Observed condition: - Machine appears substantially complete - Ram assembly present - Worktable and T-slots appear serviceable - Feed controls intact - No visible structural dam ...
Code: 0028 Brand: OMG Model: EPM/70 Automatic slotting machine for blinds Technical data Spindle connection mm 10 Drill speed 12000 rpm Simultaneous machining of 2 sections 18 possible pitches with a single toothed rod Slots depth up to 25 mm Drill motor Hp 1,5 Slide motor Hp 1 Up to 20 slots / minute Inclination from from 90 degrees (vertical) to 0 degrees (horizontal) Max section dimensions mm 100 x 120 Automatic stop Overall dimensions: machine mm 1500 x 1000 x 1200 h - kg 490 - Rack mm 3200 x 100 x 200 h - kg 30
Used slot mortiser (morticing machine) for wood, ref. N50/213. Machine for cutting mortises in timber, suitable for fitting locks and hinges in doors and joinery work. Condition: used, in working order. Auction-ID: A7-50988-118
Used slot mortiser (morticing machine) for wood, ref. N001/506. Machine for cutting mortises in timber, suitable for fitting locks and hinges in doors and joinery work. Condition: used, in working order. Auction-ID: A7-50988-117
Dowel and slotted hole drilling machine GANNER JUNIOR 320 LBM very good condition, as good as new, the machine comes from a small carpenter's shop and was used there very little This allows slotted holes to be milled and dowel holes to be drilled in 2 planes without reclamping 380V, 1500W Speed: 2800 rpm Year of Make: 1990 with the machine you can mill slotted holes for e.g. lock cases and similar things or make all kinds of frame and dowel connections, at right angles, blunt and mitred ideal for the production of dowel joints in timber frame construction, furniture, doors, windows and stairs construction and for similar things by drilling on 2 levels, by the grids and stops and by the construction of the machine, dowel connections are made in the shortest possible time, which makes the machine very economical the machine requires a compressed air connection of 6bar (the air ...
Universally applicable frame and slotted hole drilling machine Especially for window construction and universal use due to pneumatic height adjustment Duelhole drilling on two planes in one clamping Motor power 1.5 kW Start of the motor with practical handle switch With two-jaw chuck 1 - 20mm from Röhm Pneumatic adjustment of the processing height, dowels on two levels without changing. The desired drilling heights can be set for each drilling level with a digital counter, the changeover then takes place pneumatically from the front Transverse adjustment 430mm, infinitely variable or in 12mm increments Maximum height adjustment approx. 100mm above table height Drilling stroke approx. 150mm 2 pneumatic workpiece clamps Grid rail for quick adjustment on the side in 12mm grid Stop for length adjustment in slotted milling 2 swivelling workpiece supports Special stop syst ...
258 hL – Cartier – 304 stainless steel tank closed self-emptying on sloping bottom skirt This 304 stainless steel storage tank with a capacity of 258 hl is designed for the storage of liquids in the wine and agri-food environment. Its cylindrical configuration closed on a self-emptying skirt, combined with a sloping bottom, makes it a simple, robust and immediately usable solution to complete a winery or increase an existing storage capacity. Technical data Cylindrical on self-emptying skirt Capacity: 25,800 litres Material: stainless steel Tank number: 11, 12 and 13 Closed roof with chimney and hatch Ø 550 mm 2 lifting rings Ferrule 1 taster valve 1 rectangular door 430×540 mm at the bottom of the ferrule 1 partial drain valve DIN 50 with plug 1 winding tube Bottom Sloped bottom on skirt 1 total drain valve DIN 50 4 feet under the skirt Dimensions Diameter: 3000 mm Tot ...
48.8 hL – NEW – Temperature-controlled 304 stainless steel tank, sloping flat bottom, floating cap New material. Technical characteristics Model: SPAIPSER5000 Material: 304 stainless steel Total capacity: 4,880 litres Bottom: sloping flat, slope 4% Roof: floating cap Interior finish: bright annealing Exterior finish: brushed Roof 2 vacuum lifting rings 1 floating cap 316L stainless steel with complete pneumatic system Valve. Ferrule 1 jib crane 1 lifting winch 1 ladder support 1 rectangular door 420×530 mm at the bottom of the ferrule with external opening 1 partial drain with square flange 100×100, stainless steel ball valve 40 MÂCON, stainless steel stopper 1 tasting tap on DIN 15 tap 1 needle thermometer 1 complete stainless steel level with tap and stainless steel ruler (polycarbonate tube) 4 coil towers with 2.15 m² exchange surface on the ferrule 2 coil towers wit ...
245 hL – Pierre Guerin – Temperature-controlled 304 stainless steel tank with sloping bottom This PIERRE GUERIN 304L stainless steel storage tank with a capacity of 245 hL is designed for the storage of liquids in wine, brewing and cider environments. Its configuration, combined with a flat floor on legs, a central chimney and shell circuit thermoregulation, makes it a robust second-hand solution that can be used immediately to complete a winery or increase an existing storage capacity. Technical characteristics Brand: PIERRE GUERIN Material: 304L stainless steel Total capacity: 24,500 liters Thermoregulated Interior finish: cold rolled raw Exterior finish: brushed Roof Lifting rings 1 central chimney with PVC DN 500 hatch with clamping studs 1 tap for temperature probe1 50 Mâcon tap on chimney, internally / externally threaded Ferrule walkway support 1 stainless steel doo ...
Partly new, from Garant, Fraisa, Holex, Carbide etc. Auction-ID: A7-51245-87
245 hL – Pierre Guerin – Temperature-controlled 304 stainless steel tank with sloping bottom This PIERRE GUERIN 304L stainless steel storage tank with a capacity of 245 hL is designed for the storage of liquids in wine, brewing and cider environments. Its configuration, combined with a flat floor on legs, a central chimney and shell circuit thermoregulation, makes it a robust second-hand solution that can be used immediately to complete a winery or increase an existing storage capacity. Technical characteristics Brand: PIERRE GUERIN Material: 304L stainless steel Total capacity: 24,500 liters Thermoregulated Interior finish: cold rolled raw Exterior finish: brushed Roof Lifting rings 1 central chimney with PVC DN 500 hatch with clamping studs 1 tap for temperature probe1 50 Mâcon tap on chimney, internally / externally threaded Ferrule walkway support 1 stainless steel doo ...
258 hL – Cartier – 304 stainless steel tank closed self-emptying on sloping bottom skirt This 304 stainless steel storage tank with a capacity of 258 hl is designed for the storage of liquids in the wine and agri-food environment. Its cylindrical configuration closed on a self-emptying skirt, combined with a sloping bottom, makes it a simple, robust and immediately usable solution to complete a winery or increase an existing storage capacity. Technical data Cylindrical on self-emptying skirt Capacity: 25,800 litres Material: stainless steel Tank number: 11, 12 and 13 Closed roof with chimney and hatch Ø 550 mm 2 lifting rings Ferrule 1 taster valve 1 rectangular door 430×540 mm at the bottom of the ferrule 1 partial drain valve DIN 50 with plug 1 winding tube Bottom Sloped bottom on skirt 1 total drain valve DIN 50 4 feet under the skirt Dimensions Diameter: 3000 mm Tot ...
48.8 hL – NEW – Temperature-controlled 304 stainless steel tank, sloping flat bottom, floating cap New material. Technical characteristics Model: SPAIPSER5000 Material: 304 stainless steel Total capacity: 4,880 litres Bottom: sloping flat, slope 4% Roof: floating cap Interior finish: bright annealing Exterior finish: brushed Roof 2 vacuum lifting rings 1 floating cap 316L stainless steel with complete pneumatic system Valve. Ferrule 1 jib crane 1 lifting winch 1 ladder support 1 rectangular door 420×530 mm at the bottom of the ferrule with external opening 1 partial drain with square flange 100×100, stainless steel ball valve 40 MÂCON, stainless steel stopper 1 tasting tap on DIN 15 tap 1 needle thermometer 1 complete stainless steel level with tap and stainless steel ruler (polycarbonate tube) 4 coil towers with 2.15 m² exchange surface on the ferrule 2 coil towers wit ...
Key features: • Brand and model: GES-25 MKII T, Capacity: Up to 34 people, Length: 7.50 m, Width: 2.75 m, Height: 3.42 m, Draft: 1.29 m, Weight (fully equipped): 4,443 kg, Maximum davit load: 7,000.5 kg (with 34 persons, 82.5 kg/person), Material: Flame-retardant glass-reinforced polyester (GRP), Maximum installation height: 22.0 m, Length and angle of launch platform: 9 m, 35°, Operating temperature range: -15°C to +40°C • Hydraulic steering: For smooth maneuvering, Safety harnesses: 4-point adjustable safety harnesses for all seats, Sprinkler system (tank version): o Seawater-resistant aluminum pipes, Stainless steel deflectors, 3 x 50L air cylinders and high-pressure hoses, Additional features and finish: • Colors:o External: Orange (RAL 2004), Internal: Gray (RAL 7032), Buoyancy material: Polyurethane foam, Hatches: 1 rear door, 1 top hatch, 1 forward hatch, Windows: Polycar ...
Beautiful spacious sloop with a well-running Vetus 2cyl diesel excluding trailer Auction-ID: A1-47423-1010
138 hL – ETA – Temperature-controlled 304 stainless steel tank with a sloping flat bottom on a stainless steel base This 304L stainless steel temperature-controlled storage tank with a capacity of 138 hl is designed for the storage of liquids in the wine and food industry. Its configuration, combined with a sloping flat bottom on a stainless steel base, a brushed exterior finish and its thermoregulation system by internal coil radiator, makes it a robust second-hand solution that can be used immediately to complete a winery or increase an existing storage capacity. Technical characteristics Brand: ETA Material: 304L stainless steel Total capacity: 13,800 litres Temperature-controlled tank Interior finish: raw rolled, stripped and passivated Exterior finish: brushed, stripped and passivated Roof Drain socket with plug 1 chimney chimney chimney Shell 1 ladder support bar 1 tap ...
258 hL – Cartier – 304 stainless steel tank closed self-emptying on sloping bottom skirt This 304 stainless steel storage tank with a capacity of 258 hl is designed for the storage of liquids in the wine and agri-food environment. Its cylindrical configuration closed on a self-emptying skirt, combined with a sloping bottom, makes it a simple, robust and immediately usable solution to complete a winery or increase an existing storage capacity. Technical data Cylindrical on self-emptying skirt Capacity: 25,800 litres Material: stainless steel Tank number: 11, 12 and 13 Closed roof with chimney and hatch Ø 550 mm 2 lifting rings Ferrule 1 taster valve 1 rectangular door 430×540 mm at the bottom of the ferrule 1 partial drain valve DIN 50 with plug 1 winding tube Bottom Sloped bottom on skirt 1 total drain valve DIN 50 4 feet under the skirt Dimensions Diameter: 3000 mm Tot ...
48.8 hL – NEW – Temperature-controlled 304 stainless steel tank, sloping flat bottom, floating cap New material. Technical characteristics Model: SPAIPSER5000 Material: 304 stainless steel Total capacity: 4,880 litres Bottom: sloping flat, slope 4% Roof: floating cap Interior finish: bright annealing Exterior finish: brushed Roof 2 vacuum lifting rings 1 floating cap 316L stainless steel with complete pneumatic system Valve. Ferrule 1 jib crane 1 lifting winch 1 ladder support 1 rectangular door 420×530 mm at the bottom of the ferrule with external opening 1 partial drain with square flange 100×100, stainless steel ball valve 40 MÂCON, stainless steel stopper 1 tasting tap on DIN 15 tap 1 needle thermometer 1 complete stainless steel level with tap and stainless steel ruler (polycarbonate tube) 4 coil towers with 2.15 m² exchange surface on the ferrule 2 coil towers wit ...
48.8 hL – NEW – Temperature-controlled 304 stainless steel tank, sloping flat bottom, floating cap New material. Technical characteristics Model: SPAIPSER5000 Material: 304 stainless steel Total capacity: 4,880 litres Bottom: sloping flat, slope 4% Roof: floating cap Interior finish: bright annealing Exterior finish: brushed Roof 2 vacuum lifting rings 1 floating cap 316L stainless steel with complete pneumatic system Valve. Ferrule 1 jib crane 1 lifting winch 1 ladder support 1 rectangular door 420×530 mm at the bottom of the ferrule with external opening 1 partial drain with square flange 100×100, stainless steel ball valve 40 MÂCON, stainless steel stopper 1 tasting tap on DIN 15 tap 1 needle thermometer 1 complete stainless steel level with tap and stainless steel ruler (polycarbonate tube) 4 coil towers with 2.15 m² exchange surface on the ferrule 2 coil towers wit ...
max. wheel diameter: 1.100 mm max. dia. of teeth cutting: 800 mm max. module: 12 mm rotary table speeds infinitely variable: 12 U/min stroke position adjustment: 0 - 600 mm number of strokes (double strokes): 50 - 600 DH/min working spindle speeds: 25 U/min workpiece diameter: max. 275 mm stroke lenght adjustment: 0 - 240 mm total power requirement: 64 kW weight of the machine ca.: 21 t dimensions of the machine ca.: 7,30 x 5,00 x 3,65 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Various used jackets, fleece vests, vests and the like In various sizes Auction-ID: A1-50663-1688
Description: a three-point hitch for behind a tractor; a hydraulic cylinder to adjust a part; a large rear roller to flatten the bottom again and press it slightly; for the roller in combination of teeth/drag parts that loosen and level the top layer. Auction-ID: A3-46111-17526
Unused, Silveryacht 655 Tender sloop Year of construction 2026 OPTIONS, Black cable fender Hpl floor Sundeck Bunk cushion Stainless steel steering wheel with steering cable (assembled) CE papers + manual included Ex Motor Auction-ID: A1-40333-11
Gebr. Slotted Hole Drilling Machine JAGO Type: B2 exact year not known 1-lever operation Dowel pitch: 16 / 22 / 25 / 32 mm Drilling depth: 150 mm Height adjustment by handwheel Height display via counter Table size 300 x 600 mm 2-jaw chuck (up to 20 mm) 2 pcs. eccentr. Workpiece clamp 90° stop Workpiece stop on the side Extraction connection: 80 mm Weight: 230 kg Manufacturer information Good condition! The machine from a 1-man workshop
Swivel slot table swivel range 45° Table surface 400 x 390mm Condition: unchecked Auction-ID: A7-51438-650
Sea-Finder 435 sloop + 9.8 hp Tohatsu + 750 kg tilting trailer Length 4.35 meters Width 1.80 meters Year of construction boat 2021 Year of construction engine 2022 Power 9.8 hp Boat, engine and trailer are technically and options in perfect condition, everything works properly, boarding and sailing! Options Spray hood with rear sail Beige cable fender Foam deck floor Stainless steel swimming ladder Sundeck Removable table 12V + USB connection Bow lighting Top light Water resistant upholstery 4 Fenders Engine: Tohatsu 9.8 hp electric started Long tail Remote control Trailer: 750 kg unbraked tilting trailer with detachable light bar Auction-ID: A1-40333-12
Swivel table Swivel range 80° Table surface 600 x 200mm Condition: unchecked Auction-ID: A7-51438-654
Keyway slotting and broaching machine with accessories as shown. Groove width for slotting 32 mm Groove width for broaching 12 mm Stroke 330 mm Pulling force 3.0 t Total power requirement 1.2 kW Machine weight approx. 0.65 t Space requirement approx. 1.2 x 0.8 x 1.2 m Condition: functional Auction-ID: A7-51438-448
Pictured trailer not included Options, Hull color white Spray hood with cover Cable fender Bun pillow Sundeck Table Bow lighting Top light Flagpole with flag Fenders lines and anchor Built-in throttle Stainless steel swimming ladder Luxury foam deck floor (teak look) Storage space under the benches Antifouling Engine, Honda 15 hp electric started with remote control + 12 liter tank Auction-ID: A1-40333-14
Specifications: Working width: 1.80 m Weight: approx. 845 kg Required tractor power: approx. 45 kW / 60 hp Recommended tractor power: approx. 80–120 hp PTO speed: 540 rpm Drive: 4 belts Rotor: suitable for hammers or YA knives Number of hammers: approx. 16 Rear roller: diameter approx. 159 mm Equipped with PTO shaft Auction-ID: A1-47396-114
Vertical slotting/keyseating machine with round table and mechanical drive. Older robust machine for internal slots, keyways and shaping operations. Auction-ID: A1-51153-50
Small conventional shaping/slotting machine with T-slotted table and manual controls. Compact workshop machine for light shaping and slotting work. Auction-ID: A1-51153-76
max. ram stroke:220 mm total power requirement:1,5 kW weight of the machine ca.:880 kg dimensions of the machine ca.:1.500 x 1.000 x 2.200 mm slot-milling length:220 mm toolhead swivelling: +/- 10° ° Grad table::650 x 250 mm table adjustment: vertical:360 °mm table adjustment: quer/längs: 170/400 °mm strokes per minute:45 / 78 / 125 Hub/min feed:: 0,1 / 0,2 / 0,3 in 3 step
max. ram stroke:220 mm total power requirement:1,5 kW weight of the machine ca.:880 kg dimensions of the machine ca.:1.500 x 1.000 x 2.200 mm slot-milling length:220 mm toolhead swivelling: +/- 10° ° Grad table::650 x 250 mm table adjustment: vertical:360 °mm table adjustment: quer/längs: 170/400 °mm strokes per minute:45 / 78 / 125 Hub/min feed:: 0,1 / 0,2 / 0,3 in 3 step
maximum number of results exceeded
please refine your search
100 € 
