136,830 used machines on RESALE, but how to find them? Machine Search
Clamping plate with T-slots, plate field, welding table, welding table, plate boring machine, T-slot plate, -T-slot plate: clamping plate on a solid base frame with inlet/outlet device -Clamping plate: Ø 600 mm -Groove width: 20 mm -Accessories: incl. 4 holders -Total dimensions: Ø 685 x 825 mm -Weight: 200 kg
Clamping plate with T-slots, plate field, welding table, welding table, T-slot plate, clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -T-slot plate: clamping plate with support ribs -Length: 2020mm -Width: 1250mm -Groove width: 25 mm -Total dimensions: 2020/1250/H315 mm -Weight: 2280 kg
Clamping plate with T-slots, plate field, welding table, welding table, plate boring machine, T-slot plate -Welding table: clamping plate with T-slots on a solid base frame with vice -Bottom: with cooling fins -Table surface: 2010 x 650 mm -Groove width: 19 mm -Groove spacing: 130 mm -Overall dimensions: 3170/860/H1060 mm -Weight: 880 kg
Slotting machine, slotting machine, high-speed planer, keyseating machine, keyway broaching machine, keyway broaching machine, keyway tool, broaching machine, slotting machine, horizontal slotting machine, planing machine, power high-speed planer -Manufacturer: Lange & Geilen, horizontal slotting machine Kraft-Schnellhobler -Stroke: 350mm -Stroke rate: 20 - 110 1/min -Clamping table: 380 x 280 mm -Travel: X 410 mm Z 320 mm -T-Slot: 14mm -Propulsion: AEG 3 kW -Dimensions: 1460/1170/H1350 mm -Weight: 1140 kg
PLC control, power module, LT module, E/R module, regenerative module, CNC control, safety slot universal module, plug-in cards, printed circuit boards, control card, circuit board -Manufacturer: Mattle Mikron, safety insert universal module board from CNC milling machine Mikron UME 600 -Safety module: Type SEMU TN 24VDC -Board: Mikron 958 74 10 275 S300 -Dimensions: 300/170/H200 mm -Weight: 1.4 kg
Clamping plate with T-slots, plate field, welding table, welding table, plate boring machine, T-slot plate, -T-slot plate: clamping plate with support ribs and table extension on both sides -Clamping surface: 1800 x 1000 mm -Height: 840 mm -Groove width: 30 mm -Transport dimensions: 1820/1010/H840 mm -Weight: 660 kg
Clamping plate with T slots, T-slot plate, punching table, clamping plate, plate field, -T-slot plate: clamping plate with T-slots for hydraulic press, eccentric press -Clamping surface: 705 x 484 mm -Inner diameter: 250/220 mm -Plate height: 65 mm -Groove width: 22 mm -Dimensions: see drawing in the photos -Dimensions total: 705/484/H65 mm -Weight: 147 kg
Clamping plate with T-slots, plate field, welding table, welding table, T-slot plate, clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -T-slot plate: clamping plate with support ribs -Length: 2000mm -Width: 1200mm -Groove width: 14 mm -Total dimensions: 2000/1200/H230 mm -Weight: 1985 kg
Clamping plate with T-slots, plate field, welding table, welding table, T-slot plate, clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -T-slot plate: clamping plate with solid base frame -Length: 2495mm -Width: 1435 mm -Plate: with support ribs -Groove width: 28 mm -Groove spacing: 152 mm -Total dimensions: 2545/1515/H835 mm -Weight: 2860 kg
Clamping plate with T-slots, plate field, welding table, welding table, T-slot plate, clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -T-slot plate: clamping plate with support ribs -Length: 3010 mm -Width: 1260 mm -Groove width: 21 mm -Dimensions: see drawing in the photos -Total dimensions: 3010/1260/H295 mm -Weight: 2910 kg
Clamping plate with T-slots, plate field, welding table, welding table, T-slot plate, clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -T-slot plate: clamping plate with support ribs -Length: 3015 mm -Width: 1240 mm -Groove width: 21 mm -Dimensions: see drawing in the photos -Total dimensions: 3015/1240/H295 mm -Weight: 3420 kg
Clamping plate with T-slots, plate field, welding table, welding table, T-slot plate, clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -T-slot plate: clamping plate on solid base frame -Length: 3200 mm -Width: 1625 mm -Groove width: 30 mm -Dimensions: see drawing in the photos -Dimensions total: 3200/1625/H720 mm -Weight: 2300 kg
Separator screen, slotted screen basket, slotted screen baskets, replacement basket, replacement baskets, separator basket, separator slotted screen, separator filter grid, separator grid, separator screen for slurry separator, round screen, slotted screen -Slotted screen: separator screen -Gap dimensions: mm -Inside: Ø 129 mm -Dimensions: Ø 136 x 800 mm -Weight: 3.8 kg
Clamping plate with T slots, T-slot plate, punching table, clamping plate, plate field, -T-slot plate: clamping plate with T-slots, for hydraulic press, eccentric press... -Clamping surface: 630 x 500 mm -Inner diameter: 180 mm -Plate height: 75 mm -Groove width: 19 mm -Dimensions: see drawing in the photos -Dimensions total: 630/500/H75 mm -Weight: 162 kg
Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 500x390 mm, height 630 mm -Wall thickness: 65 mm -T slots: slot width 22 mm -Dimensions: see photos / technical drawing -Dimensions: 500/390/H630 mm -Weight: 171 kg
Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 535x250 mm, height 400 mm -Wall thickness: 36 mm -T slots: slot width 18 mm -Dimensions: see photos / technical drawing -Dimensions: 535/250/H400 mm -Weight: 97 kg
Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 535x250 mm, height 400 mm -Wall thickness: 43 mm -T slots: slot width 18 mm -Dimensions: see photos / technical drawing -Dimensions: 535/250/H400 mm -Weight: 106 kg
Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 535x250 mm, height 400 mm -Wall thickness: 39 mm -T slots: slot width 18 mm Dimensions: see photos / technical drawing -Dimensions: 535/250/H400 mm -Weight: 100 kg
Clamping plate with T-slots, T-slot plate, punching table, clamping plate, plate field, -T-slot plate: Mounting plate with T-slots, for hydraulic press, eccentric press... -Clamping surface: 1295 x 2000 mm -Sheet height: 90 mm Solid, planed underside -Groove width: 27 mm -Dimensions: see drawing in the photos -Overall dimensions: 1295/2000/H90 mm -Weight: 1587 kg
Clamping plate with T-slots, T-slot plate, punching table, clamping plate, plate field, -T-slot plate: Mounting plate with T-slots, for hydraulic press, eccentric press... -Clamping surface: 605 x 450 mm -Inner diameter: 180 mm -Plate height: 97 mm -Groove width: 18 mm -Dimensions: see drawing in the photos -Dimensions: 605/450/H97 mm -Weight: 183 kg
Clamping plate, welding table, straightening plate, T-slot plate -3D welding and work table -in aluminum for stainless steel processing -for positioning and finish welding with T-slot system -Mounting area: 1000x1000 mm -2x pneumatic clamping cylinders with ground connection -Dimensions: 1000/1400/H1300 mm
Clamping plate with T-slots, plate field, welding table, welding table, pallet changer -comes from a CNC machining center MAHO type MC 600 -Width: 500 mm -Length: 500 mm -Height: 180 mm -with supporting ribs -Groove width: 14 mm -Number: 1 table available Price: per piece -Weight: 200 kg/piece
Clamping plate with T-slots, plate field, welding table, welding table, plate boring mill -Width: 1100 mm -Length: 1300 mm -Height: 200/100 mm -Working height: 820 mm -with supporting ribs -Groove width: 24 mm -Groove spacing: approx. 100 mm -Transport dimensions: 1300/1100/H820 mm -Weight: approx. 1000 kg
Dowel and slotted hole drilling machine HOFFMANN HT 200 very good condition, the machine comes from an educational institution, has been used only a little and is as good as new, it has very few signs of use this allows slotted holes to be milled and dowel holes to be drilled, and the drilling height can be read very precisely on a digital counter with 3 drill bit holders: for drills with M10 external thread and for drills with 12mm and with 16mm shank, plus you get a 2-jaw chuck for drills from 3- 20mm with workpiece auxiliary supports on the left and right, which can be swivelled and have a carrier roller the machine has a landing gear with 2 angle stops on the machine table for left and right The clamping arms can be moved and moved with stake-out device for parapet railings, which is adjustable from 80-160mm and has a digital counter, with pick-up mushroom 380V, 1400 and ...
gear hobbing diameter - external: 1200 mm gear hobbing diameter - internal: 1200 mm gear hobbing width -max.: 260 mm max. workpiece diameter: 1500 mm Control: Siemens 840 D table diameter: 900 mm Table hole Diameter / depth: 320 / 520 mm max. table load: 95 kN coolant pump: 120 l/min Axial distance between thrust spindle - table: 0-820 mm work-spindle diameter: 125 mm tool taper: SK 45 DIN Table rpm: 12 1/min power requirement: 30 kW weight of the machine ca.: 24 t dimensions of the machine ca.: 11,715 x 5,565 x 4,505 m Strokes: - Stroke length min./max.: 0 mm / 270 mm - Stroke length adjustment range: 270 mm - Stroke rate (double strokes): 10 to 270 strokes/min Sliding head carriage: - Max. travel speed: 5000 mm/min Machine bed: - Axial travel: 600 mm Slotting head: - Max. module for rolling slotting: 16 mm - Slotting spindle diameter: 125 mm - Max. tool diameter: 30 ...
Double corner round slotting machine Tränklein EK-D 100; cleaned and tested; 2x Knife 16mm (other sizes on request); Insertion height max.100mm; optical sensor; Foot release. Double corner rounding machine Tränklein EK-D 100; cleaned and checked; 2x knife 16mm (other diameters on request); max.pile hight 100mm; optical sensor; foot switch.
Slotting Machine - Vertical VS 600 -Rotary table - diameter 600mm -Lifting range approx. 360mm -Three-jaw chuck - diameter 325mm -Good general condition Dimensions: LxWxH 1.9x1.2x2.2 meters / Weight approx. 1700Kg
PANHANS 116 YOC 1986 Motor power: 1.5 kW 2-lever operation Max. drilling depth: 130 mm Height adjustment: 135 mm Max. slotted hole length: 240 mm Height adjustment by handwheel Dowel pitch: 16 / 22 / 25 / 32 mm Miter ruler (adjustable) Workpiece stop 1 eccentr. Workpiece clamp Line laser (Z-laser) 230V Chassis Table size: 510 x 290 mm Weight: 220 kg incl. various Gebr. Drills Dimensions (approx. dimensions): W: 90 cm T: 125 cm H: 115 cm Manufacturer information
diameter range 8 mm shaft length under head 60 mm output pieces/min 100
diameter range 6 mm shaft length under head 25 mm output pieces/min 100
Slotted Hole Drilling Machine Holzkraft Type LLB 16 H Item No. 532 6617 Year of construction 2010 With dowel device Table size 500 mm x 200 mm Drilling width 200 mm Drilling depth 150 mm Drill head height adjustment 150 mm Wescott Drill Fiutter 0-16 mm Speed 3000 rpm. Motor power 1.1 kW Table fixed Drilling unit movable Weight 120 kg
Technical data: - Plate length approx. 3000 mm - Plate width approx. 2000 mm - Plate height approx. 310 mm - Thickness of the top plate approx. 70 mm - 8 pieces T-slots in table surface length 3000 mm - Center distance of the T-slots in the table surface 250 mm each - Center distance of the T-slots from outer edge 125 mm - T - groove width approx. 21 / 31 mm - T - groove depth approx. 30 mm - 4 pieces of adjustable feet - Space requirements L 3000 x D 2000 x H 810 mm - Weight approx. 4200 kg
Slotting Machine MAILLEFER type MAC-350 M Useful travel: 0 - 350 mm Slots width: max 36 mm Motor power: 2,5 CV Feeds: from 0,025 mm to 0,125 mm Bore: from 15 to 160 mm Automatic forward and stop Supplied with many tools (see photo) Dimensions (L x W x H): 1400 x 800 x 800 mm Weight: approx 700 kg
Tenon cutting and slotting slotting PANHANS 1376 -used----------- Technical data ----------length of the base plate: 1,000 mm, sliding travel: 710 mm, size of the sliding plate: 295 x 225 mm, installation height approx.: 56 mm
Vertical Slotting Machine GSP M 743 3-jaws chuck Ø 360 mm Table travel: X = 500 mm / Y = 450 mm Slide travel: 300 mm Throat depth: 500 mm Rotary table: Ø 690 mm Slide tilting: + 8° Rotative table/slide maxi height: 450 mm Motor power: 8 CV Strokes/min.: from 3 to 300 strokes/min. Equipped with one tool removal system upon lifting Voltage: 380 V Length: 2000 mm Depth: 2500 mm Total height: 2200 mm Weight: approx 4 T
turning diameter: 850 mm turning length: 2000 mm turning diameter over slide rest: 690 mm control: Siemens type: 840 C Cooling through the spindle: 23 bar centre height: 450 mm spindle diameter in front bearing: 200 mm spindle hollow: 128 mm power capacity: 60 kW turning speeds: 7-1800 U/min Torque: 7908 Nm workpiece weight: 4000 kg tailstock quill diameter: 160 mm tailstock quill taper MT: 5 3 jaw chuck Forckrath: 600 mm Tool changer: 60 work piece power: 30 kW turning speeds: 56-3000 U/min total power requirement: kW weight of the machine ca.: 18 t dimensions of the machine ca.: 6,3x2,4x3,3 m The machine has been completely overhauled. Capto C6 milling chuck Double prism lathe chuck The machine has many optional accessories that can be purchased separately. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms ...
max. ram stroke: 600 mm throat: ca. 400 – 800 mm table diameter: - mm : 320 mm total power requirement: - kW weight of the machine ca.: 8 t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
HARDINGE CONQUEST T42SP ist eine CNC-Drehmaschine mit Schrägbett, für Präzision, hohe Genauigkeit und Zuverlässigkeit. Kapazitäten: Spitzenweite 350 mm, DrehØ über Bett 269 mm, drehbar 231 mm, Spindelbohrung 42 mm; Wege Z 353 mm, X 135 mm; Revolver 12 Pos. Drehz. 50–5000 t/min; Motor 7,5 kW. Zubehör: 3-Backenfutter Ø150, hydraul. Reitstock, Messarm Renishaw. Ermöglicht enge Toleranzen; Branchen: Automotive, Luftfahrt, Medizintechnik Technische Daten ohne Gewähr
Code: 0476 Brand: MASTERWOOD Model: B 1/V - CE Standard Vertical chisel mortising machine for cutting recesses and grooves in wooden joinery, doors, beams and other items – CE Standard Technical data: Vertical stroke 150 mm Longitudinal stroke 260 mm Transverse stroke 70 mm Motor power 3 Hp Max workable height of solid wood component 170 mm Min/max workable height of assembled window or door frame 740/1030 mm Work surface 140 x 470 mm Tilt +/- 45° Pneumatic workpiece clamping Suction inlet diameter 60 mm Compressed air 6 bar Overall dimensions mm 1000 x 850 x 1750 h Weight kg 440
SOMAB TRANSMAB 200 ist eine CNC Drehmaschine mit Schrägbett für Präzisionsbearbeitung, hohe Genauigkeit und Zuverlässigkeit. Kapazitäten: Ø über Bett 260 mm, Spindelbohrung 35 mm, Z 300 mm, X 125 mm, Revolver 8 Pos., Schaft 16 mm, Reitstockhub 80 mm (Ø52). Technik: A2-4", Innenkegel 20 mm, 200–5000 U/min (stufenlos), 4 kW Motor, 3x400 V, Gewicht ~2500 kg, 1900×1400×1980 mm. Zubehör: Spannzangensatz, Lampe, Reitstock, Werkzeugschr., RS232, Fußpedal. Für enge Toleranzen in Automotive, Luftfahrt, MedTech. Technische Daten ohne Gewähr
SOMAB TRANSMAB 200 is a CNC Drehmaschine mit Schrägbett, für präzise Bearbeitung, hohe Genauigkeit und Zuverlässigkeit. Kapazitäten: Drehdurchmesser 260 mm, Spindelbohrung 35 mm; Wege Z 300 mm, X 125 mm; DUPLOMATIC Revolver 8 Pos., Werkzeugschaft Ø16 mm. Daten: 200–5000 min-¹ stufenlos, Spindelmotor 4 kW, Aufnahme A2 4", Innenkonus 20 mm; Reitstock Morse 3, Hub 80 mm, Ø52 mm; 3×400 V 50 Hz; Gewicht ~2500 kg; L1900×B1400×H1980 mm. Zubehör: Spannzangen F38, Beleuchtung, Reitstock, Werkzeugschrank, RS232, Fußpedal, Werkzeughalter. Für enge Toleranzen in Automotive, Luftfahrt, Medizintechnik, Uhrenbau, Werkzeugbau. Technische Daten ohne Gewähr
SOMAB TRANSMAB 200 ist eine CNC Drehmaschine mit Schrägbett, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Drehdurchmesser über dem Bett 260 mm, Spindelbohrung 35 mm; Verfahrwege Z 300 mm, X 125 mm. Revolverschlitten DUPLOMATIC, 8 Positionen, 8 feste Werkzeuge, Werkzeugschaft 16 mm, Innenkegeldurchmesser 20 mm. Spindeldrehzahlen stufenlos 200–5000 U/min, Spindelmotor 4 kW, Spindelaufnahme A2 4", Reitstock Morse 3 mit Pinolenhub 80 mm und Durchmesser 52 mm, Druck 1200 N; Anschluss 3x400 V 50 Hz; Gewicht ca. 2500 kg; Abmessungen L1900×B1400×H1980 mm. Ausstattung: Spannzangenaufnahme F38, Satz Spannzangen, Beleuchtung, Werkzeugschrank, RS232-Schnittstelle, Fußpedal, Satz Werkzeughalter. Ermöglicht Bearbeitungen mit engen Toleranzen; typische Branchen: Automobil, Luftfahrt, Medizintechnik, Werkzeugbau, Uhrmacherei. Technische Daten ohne Gewähr
Corner round slotting machine Tränklein EK-100; cleaned and tested; Insertion height 100mm; Knife stroke 110mm; Table size 260x200mm; Knife 3mm, other radii on request; insertion sensor. Corner rounding machine Tränklein EK-100; cleaned and checked; working hight 100mm; knife stroke 110mm; table size 260x200mm; knife 3mm, other diameters on request; Lay Up Sensor.
max. wheel diameter: 420 mm gear width: 120 mm max. module: 7 mm min. module: 0,5 gear hobbing diameter - external: 420 mm gear hobbing diameter - internal: 370 mm table diameter: 400 mm boring diameter: 125 mm spindle stroke: 120 mm stroke position adjustment: 230 mm strokes - infinitely variable: 30 / 800 Hub/min depth feed stepless: 0,016 - 0,063 mm/Hub total power requirement: 35 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 2,46 x 3,48 x 2,66 m Accessories: - Various replacement wheels and blade holders - Documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Morey Ø 500 mm Strokelength: 200 mm Table dia: 500 mm Depth of throat : toolholder -- column: 600 mm
Masterwood chisel mortiser Type: OMB1 (horizontal mortiser) Chissel: 2.2 kW electric movement with hydraulic drive stroke Table: electric sideward driven, with stops Fixation: 2 top/vertical hydraulic product clamp 2 horizontal hydraulic clamps
Hofmann long hole drill Manufacturer: Hofmann Type: LL160 Year: Specifications: Drilling dept.: max. 145 mm Drilling length:.: max. 240 mm Height adjutment: max.135 mm Drilling: Dept limitation stopper Table: side ward movement via sep. Handle Cast iron table: solid with mechanical product clamp Height adjustment: Handwheel Power: 1,3 kW Drill clamp:: 5 – 20 mm
maximum number of results exceeded
please refine your search
