slitter rewinder used for sale

for sale by owner, special price for quick sale: used Titan duplex slitter rewinder 1200 mm in operation worked with film & paper unwinder diam. 1000 mm, shafts 76 & 152 mm rewinder: double shafts on rewinder: 76 mm film: youtu.be/T949u6BQRLU Special price for quick sale only- we need space Machine offered subject to unsold

Materials: BOPP, PP ,CAST, ALU, LDPE, NYLON, PETP, OPA, Paper, PE, CPP, BOPET Working width 1300 mm Parent Roll Diameter 780 mm Final Roll Diameter 560 mm Maximum mother reel weight 400 kg Finished Roll Weight/Вес готовой бобины (kg) 200 kg Duble Unwinder Unwinder with shaft Rewinder with shaft Number shafts 2 Thickness range (microns) 12-250 Speed (m/min) 500 m/min Brake type With magnet Knife type/Тип ножа (circular, razor, scissor) Razor Slitting Width (mm) 35-130 Unwinder Roll Core Diameter 75 mm Rewinder Roll Core Diameter 75 mm Rewinder Tension (kN) 0-1000 Pressure 6 Bar Control system Voltage 3X380V Frequency 50 HZ Installed Power 55 Kw

Special offer: Lemu 1050 mm semiautomatic slitter rewinder reel diam on unwind: up to 1100 mm can be shown in operation rewind diam up to 180 mm, if more needed we will check if possible rewinder: cores: cores: 76 mm and 12,7 min width of the reel 15 mm print of the stripe at the end of the reel automatic stop after achieving particular diameter of the reel machine offered subject to unsold Best regards

R23801/12 JAGENBERG slitter rewinder model: Vari Dur age: 1974 Net width : 3.800 mm materials: - coated paper, gloss and matt, grammages from 50 to 250 g/m². max. speed: 1500 m/min. for paper of 250 g/m² (The speed depends on the quality and the grammage of the paper) max. unwinding diameter: 2.500 mm max. winding diameter: 1.525 mm min.cutting width: 100 mm N° of upper blades: 6 Unwinder: 5 singles unwinders max. width of reels: 1.730 mm min. width of reels: 450 mm max. unwinding diameter: 1.525 mm min. unwinding diameter: 300 mm (from 900 to 1700 mm of net width) 600 mm (from 450 to 900 mm of net width) max. weight of reels: 35 kN Available: sofort

<br>Machine completely over-recovered and repainted; Slitter Rewinder with pneumatic unwinding and winding gate, shaft, electrical lateral adjustment, working width 1320 mm, discharged diameter 1300 mm, core diameter 76 mm pneumatic brake Ortlinghaus, new upper and lower knives<br><br>Still in operation: Yes<br>

Slitter rewinder, reconditioned, working width, 110 cm, winding diameter: 100 cm, pneumatic winding shafts 70/76/150 mm, hydraulic lifing in and out mechanism, Web guide unit, tension control unit with adjustable brake, overall perforation, Siemens S5 Still in operation: Yes Available: sofort

Machine completely reconditioned and repainted; Slitter rewinder with pneumatic unwinding and rewinding shaft, electrical lateral adjustment, working width 1320 mm, unwinding diameter 1300 mm, core diameter 76 mm, pneumatic brake Ortlinghaus, new upper and lower knives Still in operation: Yes

ASHE Sapphire Duplex Slitter Rewinder: Type 130 - 60 Baujahr / Year: 2002 Cutting width minimum / minimum slit width: 15 mm Max. material width: 1300 mm Max. unwind diameter: 1000 mm Unwind core diameter: 76 mm & 150 mm Rewind core i.d.: 76 mm Number of lower knives / number slits: approx. 60 pcs. Material / material range: - Transfer tape with open adhesive / open adhesive transfer tape - Papiere / various papers ... - Buchbindingeinen / canvas book binding material - mit Absaugung / with aspiration - mit 2 Entladenwagen / with two unloader carriage Self-dismantling and removal / machine "as it goes and stands"

2014 Smag Label Inspection Machine – Slitter Rewinder 350 mm working width Slitting Rewinding Tube Scan digital Inspection Camera Web Guide Label Inspection with or without slitting Manufacturer: SMAG GRAPHIQUE Type: 825 Year of manufacturing: 2014 Web width: 350 mm Mechanical Speed: 120m/min Rewinding Spindles: 25 / 40 / 50 / 76 mm Machine is located in Western Europe Please contact PP Machinery Team for more information or an inspection

ARPECO TRACKER SLITTER REWINDER -Year 1995 , Web Width: 13" ( 33 cms.) -Hydraulic Edge Guide, Shear Cut Slitting 28" ( 70 cms. ) max roll Diameter -18” max rewind diameter -Stroboscope- Strobe Light, 3” core shaft diameter -Incremental Length counter -Individual Label Counter -Dual Speed Rewind, Labels In / Labels Out -Web Advance, in production

Working width 1000 mm Still in operation: Yes Available: immediately

R23801/12 JAGENBERG Roller cutter Model: Vari Major Built: 1974 Width: 3,800 mm Materials: - coated paper, glossy and matte, grammage from 50 to 250 g/m2. max. speed: 1,500 m/min. for paper 250 g/m2 (The speed depends on the quality and grammage of the paper.) max. unwinding diameter: 2,500 mm max. winding diameter: 1,525 mm min. cutting width: 100 mm Number of upper knives: 6 Winder: 5 Single Winder max. roll width: 1,730 mm min. roll width: 450 mm max. unwinding diameter: 1,525 mm min. unwinding diameter: 300 mm 600 mm max. roll weight: 35 kN Available: immediately

<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately

roller cutter, overhauled, working width: 110 cm, roller diameter, 100 cm, pneumatic winding shafts 70/76/150 mm, hydraulic lifting/lifting device, side edge control, dancer roller, load control with control brake, surface needle, Siemes S5 Still in operation: Yes Available: immediately

<br>Working width: 1320 mm, outside diameter 1300 mm, inner diameter 70-155 mm, shaftless discharge discharge with lifting platform for nut rollers, upwinding with pneumatic extension shaft and mechanical device for finished rolling, lifting core inner diameter 76 mm, machine in production<br><br><br>br>

Working width: 1320 mm, unwinding outer diameter 1300 mm, unwinding inner diameter 70 - 155 mm, shaftless unwinding with lifting platform for mother reel, upwinding with pneumatic expansion shaft and mechanical lifting up device for finished reel, core inner diameter 76 mm, machine in producion

450 Automatic Die Cut and Turret Rewinder 450mm Rotary Die Cutting unit: -Unwinder with auto web guider -Auto Tension Control system -Pressure meters for die cutting unit -Standard slitting unit with 6sets blades -Standard matrix removing system -Magnetic Powder system,mechanical speed 100meters/min -Max unwinding diameter 700mm, web width 330mm -Standard connection component to 330 turret rewinder 450 Auto Turret rewinder: -Automatic paper core bowl feeder -Automatic tail glue unit -Automatic paper core conveyor -Pressing paper swing arm -Automatic cut unit -Automatic finished roll ejection -Automatic brush press paper unit -Automatic core glue unit -Air expanding shaft 4sets each sizes 1’’, 1.5’’ and 3’’ -Labeling System (optional): Included Features: Speed: 60-100 m/min Max. Rewinding Diameter: 350mm Max. Web Width: 450mm Min. Rewinding W ...

working width 600 mm Still in operation: Yes Available: sofort

working width 7.400 mm Still in operation: Yes Available: sofort

working width 1000 mm Still in operation: Yes Available: sofort

Abrbeitsbreite / working width 1250 mm

Max. roll width: 650mm, max. roll weight: 50kg.

Material width max.: 2.500 mm Unwinding-diameter: 1.200 mm Rewinding diameter: 1.050 mm material specification: film from 12 µm, paper + laminates , paper + board 35-250 gr/m2, - exhauster and banana roll - number of slitting / knifes: max 7 reels out / round-knifes - min. slitting width: min 180mm out - max. speed - mechanic/practical: abt. 400 m/min - copy of brochures / drawings - although from feb 1965

Unwinder Web guide rotary die cut Missing label detection to check Waste rewinder Slitting Speed: 120 m/min

material-width : max 1.200 mm cores of mother roll 76+152 mm weight of un+rewind-roll 1.000 kg unwinder diameter max. 1.000 mm rewind diameter max 1.000 mm rewind-roll min. width: 150 mm one arm max. 219 mm / two arms up from 220 mm rewind shaft dia. 50 / 70 / 76 mm tension-unwinding : 100 kg tension-rewinding : 20 kg/each arm machine speed : 350 m/min

Technical specifications: Max. width 330mm Max. Rewinding speed 200m/min Max. Control speed 250m/min Max Roll weight unwinder 150kg Max. Roll weight rewinder 70kg Max. Diameter unwinder 700mm Max. Diameter rewinder 400mm Max. Paper tension 5-100N Diameter Shaft unwinder 76mm Diameter Shaft rewinder 76mm Configuration: Unwinder Guidline Splice table Stroboscope Settings module machine Controle area (AVT camera not included) Bufferzone Extra webguide Niprol modules Slitting module (razerknives) Web clamp Rewinder (Friction shaft)

Slitter /Unwinder Manufacturer: Proslit Model: DUO 1350 SL Year : 2007 Machine Number: 135 SL With Printvision/ apollo II AVT Precision Camera Complete with all available spares and manuals

Slitter rewinder Neolt Electro Trim 250; good condition; cleaned and tested; Working width 2500mm; .max. Cutting thickness 0.6mm; Cutting speed 2m/s. Roll cutter Neolt Electro Trim 250; good condition; cleaned and checked; working width 2500mm; max. thikness 0.6mm; spedd up to 2m/s.

WIDTH OF STRIP: 457-1524, THICKNESS: 0.254-1.63 MM WIDTH OF STRIP: 457 - 1676 MM, THICKNESS: 0.66 - 3.175 MM

1. STRIP WIDTH: 700-1550 MM, THICKNESS: 0.3-3.0 MM 2. STRIP WIDTH: 650 MM, THICKNESS: 0.1 MM 3. FOIL WIDTH: 650 MM, THICKNESS: 0.1 MM 4. FOIL WIDTH: 680 MM, THICKNESS: 0.06 - 0.200 MM 5. FOIL WIDTH: 650-800 MM, THICKNESS: 0.007 - 0.065 MM

Qty. 1 Second-hand steel strip slitter Mfc.: Dai Hyun Built: 1994 Still in operation until end of July 2023 Material to Slit: Hot & cold rolled steel coil, Hot deep galvanized steel, Carbon steel Line Direction: Left to right Strip Width: 1400 mm Thickness: 0.8 - 6.0 mm Max. Coil weight: 24 MT Un-coiler ID with Liner: Ø 480 mm, Ø 600 mm Coil Dia.: Ø 1000 & Ø 2000 mm Re-coiler Inside Dia.: Ø 500 mm, Ø 760 mm Slitting Speed: 50-100 m/min Edging width: 3 mm to 10 mm Electric Power: Input voltage: 400 V, 50 Hz - 220 VAC, 50 Hz,3 Ph. ± l 0% for drive Control Voltage: 110 VAC, 50 Hz, 1 Ph. Slitting capacity Working speed and No. of cuts Min. slit width is 40 mm at thickness 1.0 – 2.5 mm. Strip thickness No. of cuts No. of strips Line speed mm m/min 1.0 - 1.9 16 15 70-90 2.0 - 2.9 14 13 70-80 3.0 – 4.0 12 11 60-70 4.1 – 5.0 7 6 60-70  ...

1. STRIP WIDTH: 300-750 MM, THICKNESS: 0.2-1.5 MM, CAP.: 17500 T/A., MODERNISED: 1995 & 2005 2. LOOPING SLITTER, STRIP WIDTH: 200-356 MM; THICKNESS: 0.05-0.5 MM, CAP.: 5500 T/A., 3. STRIP WIDTH: 300-365 MM, THICKNESS: 0.5-2.0 MM, CAP.: 6500 T/A.

Paper size : 210 x 210 mm – 370 x 650 mm Paper weight : 110-350 gms Speed : 1560 sheets/hour Machine complete, in good working conditions.

Business card 55 mm module Paper size : 210 x 210 mm – 370 x 650 mm Paper weight : 110-350 gms Speed : 1560 sheets/hour Power supply : 230V – 50/60Hz

Qty. 1 Second-hand slitting line Mfc.: Kampf Built: 2001 Re-Installed in 2016 under power – no production! Material Processed: Al. Alloys 1145, 1100, 3003, 7072 and 8111 Temper: 0 Thru H19 Strip Width: 635 - 1753 mm (25" - 69") Thickness: 0.05 - 0.381 mm (0.002" - 0.015") Slitting Width: 15.8 mm - 1169 mm (0.6" - 46") Max. 40 Cuts Plus Edge Trim According to Kampf, this Line will run Can Lid Stock: 0.93 mm (0.037") and "O Temper" Dead Soft Aluminum at 2.06 mm (0.081") with Knife Modifications. Line Speed Max: 800 m/min. (2600 Ft/min.) depending on material type, thickness, etc.

fully automated DC-646 Slitter/Cutter/Creaser is Duplo's mid-range solution. With its ability to slit/cut/crease, perforate, and fold digitally-printed applications in one pass, the DC-646 delivers professionally-finished jobs up to 30 sheets per minute. Cut job costs by doing away with time-consuming set ups and make-ready times. Finish jobs in quick turnarounds. Incredibly efficient and easy to use, the DC-646 produces a wide range of full-bleed applications from 24-up business cards to invitations and tickets on demand. Features Automated job set up and changeovers Lightweight paper crease module to process thinner stock Integrates with Fiery Impose to automate job preparation Perforating and in-line folding options for additional finishing

Qty. 1 Second-hand coil slitting line Mfc.: GUIDA IMPIANTI, Italy Built: 2003 Max. strip width: 2,000 mm Thickness: 1.5 – 5.0 mm Material: Carbon steel, inox, stainless steel Speed: 80 ~ 160 m/min Coil Weight: 26 TON Coil ID: 508 / 760 mm Coil OD: 2100 mm Knife diameter: 370 / 450 mm Traction resistance: 650 N/m² Installed power: 360 kW

Business card modul Paper size : 210 x 210 mm – 370 x 650 mm Paper weight : 110-350 gms Speed : 1560 sheets/hour Power supply : 230V – 50/60Hz Machine checked and cleaned

Paper size : 210 x 210 mm – 370 x 650 mm Paper weight : 110-350 gms Speed : 1560 sheets/hour Power supply : 230V – 50/60Hz Business card 55 mm module

Paper size : 210 x 210 mm – 370 x 650 mm Paper weight : 110-350 gms Speed : 1560 sheets/hour Power supply : 230V – 50/60Hz Business card 55 mm module Machine checked and cleaned in working conditions.

Slitter Slitter cutting width 750 MM Knife length: 750 mm Mounted on a table (table dim. 1000 x 900 mm) 2 hands control (safety matter)

Qty. 1 Second-hand slitting line – still in operation Mfc.: BONAK Model: 1550-4-20 Built: 1990 Min-Max.Strip Width: 500 - 1.550 mm Min-Max Thickness: 0.5 - 4 mm Entry coils: 20 Tn ID: 450-650-800 mm OD: 2.000 mm Exit coils: 20 Tn ID: 508 mm OD: 2.000 mm Line speed: 0-100 mm/min Large number of knives, separators, etc.. Pass line: Right to Left Floor space required: 19 x 10.5 m

Qty. 1 Second-hand slitting line - dismantled Manufacturer: Mariani (Italy) Built: 1988/89 Electrical and controller are of 2006 Status: dismantled and in storage Strip width: 1500 mm Thickness: 0,5 - 3 mm Coil weight: 25 ton Coil ID: 500 / 700 Coil OD: 700 / 1700 Slitting shear rollers diameter 220 mm Knives dia.: 355 mm Line speed: 80 m/min.

Qty. 1 Second-hand slitting line - dismantled Manufacturer: Guida (Italy) Built: 1990 Status: dismantled and in storage Strip width: 1500 mm Thickness: 1.0 - 8.0 mm Coil weight: 20 ton Coils ID: 500/600 plus steel spacers for bigger diameter Shear roller diameter: 220 mm Knife diameter: 355 mm Speed: 0/25/50 m/min

Qty. 1 Second-hand slitting line – still on foundation! Mfc.: SUNDWIG Built: 1990 Materials: Cold rolled steel coil, Hot rolled steel coil, galvanised steel coil Strip width: 400 – 1,700 mm Thickness: 0.4 – 3.0 mm Coil weight: 32,000 kgs Tensile strength: max. 600 N/mm² Final strip width after slitting: 50 – 1,600 mm Coil ID (uncoiler): 508 / 610 mm Coil OD (uncoiler): 550 – 2,100 mm Coil ID (recoiler): 508 / 610 mm Coil OD (recoiler): max. 2,100 mm Hydraulic pressure: 120 bar Feeding speed at straightener: 15 m/min. Feeding speed: 30 m/min. Operation speeds: 30-150 m/min & 30-300 m/min.

For sale: Bragernes aut. coreless rewinder, year 1981, web width 1000 mm, Unwind dia. 1000 mm. Can make rolls from 5 m up to outside dia. 50 mm With web guide and tension control. Available: Now

Working width 1350 mm

Maximum label roll diameter 350 mm Rollenkerndurchmeser 76 mm, incl. adapter for other diameters Stufenos adjustable wrap speed Dimensions 800 x 400 x 300 mm (L x W x H)

REWINDER STRIP WIDTH: 650-710 MM, THICKNESS: 0.5-0.65 MM,

R26081/12 Jagenberg rewinder model: VII age: 1963 size: 1600 mm available: immediately material: paper and foil sleeve inner diameter:70 mm speedt: max. 500 m/min about 10 knives Available: sofort