slide used for sale

Slideways for die-casting machine, 2580 x 125 x 25mm, Idra, Oleopress, new The new slideways from Olepress / OP die casting come from a spare parts stock of an aluminium die casting company. They fit die casting machines like Olepress, Idra and others. See dimensions Slideways, slide rails for aluminium die casting machines, case hardened steel. The bronze bars of the die casting tables slide on these slide rails. 2580 x 125 x 25mm, bores 4 x D20/14 x 2540 x 90 If you have a UID number, we will gladly issue an invoice without VAT. You are welcome to inspect and check the goods at our premises in Austria, 3130 Herzogenburg.

Suction slide, ventilation duct slide, slide for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Length: 470 mm -Connection: Ø 500 mm -mechanical: flap -Material: sheet steel -Number: 1x slider available -Price: per piece -Dimensions: 550/470 mm -Weight: 22 kg

Linear drive, linear gear, lifting gear, spindle drive, pneumatic drive, slide, guide, electromechanical linear axis, mini slide -Manufacturer: Festo, mini slide ovp -Type SLT-10-10-PA Mat. no. 170554K502 -Stroke: 10mm -Piston: Ø 10 mm -Cardboard dimensions: 70/50/H30 mm -Weight: 0.4 kg

Compact slide SMC MXQ8-20 stroke 20 mm 1.5 - 7 bar Piston diameter: Ø 8 mm slide: 62 x 32 mm used, tested ! Dimensions: 95 x 45 x 70 mm

Linear drive, linear gear, screw jack, spindle drive, pneumatic drive, slide, guide, electromechanical linear axis -Festo: mini slide 170587 JN02 -Stroke: 50 mm -Dimensions: 123/65/H40 mm -Weight: 0.7 kg

Built 1988. Pneumatic flat slide valve, in solid design, with rectangular flange mounting. Suitable for temperatures up to 120°C. In mint condition.

2 piece Pneumatic slide valves DN 200, PN 10, with purging connection, AISI 316Ti with solenoid valve. Unit price, negotiable.

Servo motor + electric sled, EMMS-AS-70-M-LS-RMB + EGSK-46-200-10P, Festo, used Top Attention: Original Festo product - No replica from… Special price ! If you have a VAT number we will gladly issue an invoice without VAT. As good as new! From my assessment, the linear actuator is as good as new, but is sold as used. The part was purchased from a spare parts store of a company and has never been in operation. The actuator was installed, tested, disassembled and stocked in the spare parts warehouse as a replacement linear actuator. Servo motor EMMS-AS-70-M-LS-RMB, Festo Electric slide EGSK-46-200-10P, Festo Functional guarantee! For second hand parts we can not provide a conventional warranty and guarantee. However, we give you a functional guarantee. If the device does not work in the course of commissioning, you can return the goods and we will refund the purchase ...

UMU 5000 mm slide length horizontal lathe Machine is in good working condition

Comp. Slide unit, pneumatic cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 50 mm -Air inlet and outlet: adjustable -Weight: 3 kg

Compact sled SMC MXP16-20B stroke 20 mm 0.15 - 0.7 MPa ( 1.5 - 7 bar ) Piston diameter: Ø 16 mm Slide: 40 x 45 mm used, tested ! Dimensions: 110 x 80 x 50 mm

Slide unit, double-acting, hydraulic cylinder AHP MERKLE BSE250.25/16.01.4.201.150 Art. No. 057204 piston diameter: Ø 25 mm rod diameter: Ø 16 mm stroke: 150 m operating pressure: max. 250 bar front panel: 142 x 70 x 24 mm 4 guide rails used ! Dimensions: 250 x 145 x 85 mm

Compact sled SMC EMXQ20-30 stroke 30 mm 0.15 - 0.7 MPa ( 1.5 - 7 bar ) Piston diameter: Ø 20 mm Slide: 60 x 95 mm used, tested ! Dimensions: 120 x 90 x 50 mm

Compact sled SMC MXQ12-100 stroke 100 mm 0.15 - 0.7 MPa ( 1.5 - 7 bar ) Piston diameter: Ø 12 mm Slide: 39 x 173 mm used, tested ! Dimensions: 21 x 70 x 30 mm

Manual slide valve FESTO W-3-1/2 2342 1.0 - 12 bar Connections: G1/2 Material ( valve ): Brass Material ( sleeve gate valve ): Aluminum New ! Dimensions ( valve ): 88 x 45 x 45 mm Dimensions ( packaging ): 95 x 55 x 50 mm

Electric dosing slide KISA Brand: KISA Dosing opening: 500 x 500 mm Propulsion: 0.75 kW Available on stock: 2 pieces

Slide grinding machine Brand: Aschersleben Model: SFBZ 1600 Machine on sale due to higher investment. Stroke: 6000 x 2100 x 1200 mm Machine with 3 heads in very good condition, rebuilt in geometry in 2014. Very few hours of operation. The machine is visible in France, Burgundy region.

Y.J.: 1988, in robust version with rectangular flange attachment, suitable for temperatures up to 120C, as good as new condition.

Flat slider for drilling rig for mounting in the drilling spindle Tool holder SK50

YOM 1987. Worked not more than 10 years, one shift Grinding length 3000 mm Grinding width 1700 mm Workpiece height 1600 mm Distance between columns 1860 mm Grinding heads- 2 Table surface 3230x1600 mm Number of slots of the table 10 pcs Permissible table load with evenly distributed load 5000kg/m Weight of work-piece 15t Table travel speed 1-40m/min

Size: 0300, outlet opening (300x300) mm, Operating overpressure 0.8 bar, Operating temperature: 120°C

Forklift attachments Snow sliders with rubber scrapers Quick pick-up with the fork tines Clearing shield 2-fold to the left and right adjustable Spring folding hatches and scraper screwed on Securing against unintentional slipping Shield width: approx. 2000 mm Shield height: approx. 400 mm Fork cross section: approx. 120 x 50 mm Fork distance: approx. 540 mm All information without guarantee

- Stainless steel - pneumatically operated - 540 x 590 mm flange dimension inside

Pneumatically actuated outlet valve with rod cylinder WABCO x 63 x 400 mm 5/2-way solenoid valve 220V and position switch 80mm high Inlet side with hose connection socket s.350 (screwed on), checked The slider is currently limited to 260 or 160 mm stroke by limit switches We have two pieces of this model in stock, along with many other pipe valves, inlet valves, flaps, pipe crossovers for a wide range of applications. We look forward to hearing from you!

faceplate diameter: 610 mm adjustment: 200 +/- mm spindle bore: 102 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC Portal Grinder DANOBAT Year 2010 Table size 8000 x 2500mm X1 table travel 8600mm Grinding width 2650mm Passage between columns 3100mm Grinding height 1400mm Max table load 32000kg Y2 head cross travel 3520mm W2 head vertical travel 1570mm A1 Head angular stroke +/- 110° Angle head indexing 2,5° Wheel size dia 610 x 100 x dia 304,8mm Minimum wheel size dia 450mm Wheel motor power 35kW C2 Automatic wheel changer 2 positions V2 Universal wheel dressing unit 260mm U2 Universal wheel dressing unit 120mm CNC SIEMENS 840 D MARPOSS measuring system Full working area cover with automatic opening on one side for piece loading Machine weight 95000kg Machine plant dimensions with cover 21440 x 6000mm CE Filtering unit with conveyor Set of wheels Flanges Refrigerating unit Installed and working Perfect conditions 4000 working hours Excellent condition

Offer here a large vacuum slider from VAT, Model: F19-107685/1 He sealed a Leybold CoolVac 10000, which can also be purchased as an option.

with electric air curtain; Electrically operated

Bar capacity round/hexagonal/square: 42/36/29mm, connected load: 22.5kW, controls: GE Fanuc Series 18i-TB, length: 2200mm, width: 1270mm, height: 1580mm, weight: 2.7t, operating hours control: 28,829h.

Nominal diameter 300 mm PN 10 bar

Upper carriage with 4-fold steel holder WMW stroke: 250 mm Base: 320 x 320 mm hole spacing: 140 x 223 mm hole diameter: Ø 20 mm Guide ring: Ø 200 mm 4-fold steel holder Insertion height: 90 mm used, tested ! Dimensions: 800 x 270 x 480 mm

Mini sled, sled unit FESTO SLS-10-5-P-A 170491 stroke: 5 mm rod diameter Ø 4 mm New ! Dimensions ( carriage ): 51 x 45 x 20 mm Dimensions ( packaging ): 85 x 70 x 100 mm

Mini Carriage, Carriage Unit FESTO SLT-6-30-P-A 170551 Piston diameter: Ø 6 mm stroke: 30 mm rod diameter Ø 3 mm with position sensors, cable length approx. 0.5 m used, tested ! Dimensions ( without cable ): 75 x 50 x 20 mm

Carriage, 2 pieces FIBRO 0.282.00044 Rail cross-section: 22 x 39 mm 2 Jaws: 5 x 29 mm New ! Dimensions ( single carriage ): 67 x 39 x 47 mm

Carriage, 2 pieces FIBRO 0.282.00048 Rail cross-section: 29 x 49 mm 2 Jaws: 11 x 74 mm New ! Dimensions ( single carriage ): 89 x 49 x 60 mm

Belt conveyor slider 1900-300-1050 Make: Transnorm like new, showroom machine Year 2018 Length:1900 mm Belt width: 300 mm Stand dimensions: 790x480 mm Current conveyor belt height: 1050 mm Adjustable foot height: 100 mm Maximum ejection width: 890 mm Belt conveyor speed: 0,03-1,487m/s Electrical data Completely wired with sensors, direct wiring in the control box Belt conveyor motor data: V300-500, kw 0,75/S1 with frequency converter Ejection motor data: V300-500, kw 0,11-1,1/S1 with frequency converter and Brake Features: Belt width in mm: 300 Conveying length in mm: 1900 Antrieb: SEW Getriebemotor mit MOVIMOT Foot plates: 790x480 Conveyor speed m / s: 0,03-1,487 Bauhöhe in mm (BH): 1050 For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to ...

Knapp transfer roller conveyor Toothed belt slider 90° 750-510-450 RA1875 Make: Knapp Running direction: both directions Roller width (RB): 450 mm Nominal/outer width (NB): 510 mm Length: 750 mm Roller diameter: 50 mm Roller distance: 55 & 90 mm Angle between roller conveyors: 15° Motor overslide belts: SEW-Motor 3x 300-500V Motor Roller conveyors: Interroll EC300 24V Height frame: 420 mm Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Scope of delivery: without supports Optionally available: Supports Side guide one and both sides Condition: functional and visually good condition Features: nominal voltage: 24V, 380-500V condition: very good (used) angle: Winkel zweite Bahn 15° Conveying length in mm: 750 Nominal / outside width in mm: 510 Roll width in mm: 450 Roll division in mm: 55, 90 Driven: YES Engine type: SEW Eurodrive , Interroll EC 300 Conveyor s ...

Knapp transfer roller conveyor Toothed belt slider 90° 900-485-425 RA1876 Make: Knapp Running direction: both directions Roller width (RB): 425 mm Nominal/outer width (NB): 485 mm Length: 900 mm Roller diameter: 50 mm Roller distance: 75 mm Motor overslide belts: SEW-Motor 3x 300-500V 0,25 kW Motor Roller conveyors: Interroll EC300 24V Height frame: 170 mm Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Pneumatic end stop and pneumatic lifting of the transfer belt Scope of delivery: without supports Optionally available: Supports Side guide one and both sides Condition: functional and visually good condition Features: condition: very good (used) angle: 90° nominal voltage: 24V, 380-500V Conveying length in mm: 900 Nominal / outside width in mm: 485 Roll width in mm: 425 Roll division in mm: 75 Driven: YES Engine type: SEW Eurodrive , Interroll EC 300 KW: ...

Knapp transfer roller conveyor Toothed belt slider 90° 675-690-625 RA1891 Make: Knapp Running direction: both directions Roller width (RB): 625 mm Nominal/outer width (NB): 690 mm Length: 675 mm Roller diameter: 50 mm Roller distance: 75 mm Motor overslide belts: SEW-Motor 3x 300-500V 0,25 kW Motor Roller conveyors: Interroll EC300 24V Height frame: 170 mm Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Pneumatic lifting of the transfer belt Scope of delivery: without supports including end stop Optionally available: Supports Side guide one and both sides Condition: functional and visually good condition Features: condition: very good (used) angle: 90° nominal voltage: 24V, 380-500V Conveying length in mm: 675 Nominal / outside width in mm: 690 Roll width in mm: 625 Roll division in mm: 75 Driven: YES Engine type: SEW Eurodrive , Interroll EC 300 KW: 0,2 ...

Knapp transfer roller conveyor Toothed belt slider 90° 900-485-425 RA1893 Make: Knapp Running direction: both directions Roller width (RB): 425 mm Nominal/outer width (NB): 485 mm Length: 900 mm Roller diameter: 50 mm Roller distance: 75 mm Motor overslide belts: SEW-Motor 3x 300-500V Motor Roller conveyors: Interroll EC300 24V Height frame: 275 mm inkluding Pneumatic overslide belts and end stop Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Optionally available: Supports Side guide one and both sides Features: condition: very good (used) nominal voltage: 24V, 380-500V Conveying length in mm: 900 Nominal / outside width in mm: 485 Roll width in mm: 425 Roll division in mm: 75 Driven: YES Engine type: SEW Eurodrive , Interroll EC 300 Conveyor speed m / s: bis 1,25m/s scope of delivery: inklusive Pneumatische Ventile und Zylinder, including supports For i ...

Knapp transfer roller conveyor Toothed belt slider 90° 750-485-425 RA1856 Make: Knapp Running direction: both directions Roller width (RB): 425 mm Nominal/outer width (NB): 485 mm Length: 750 mm Distance between the roller conveyors: 95 mm Distance between the overslide belts: 400 mm Roller diameter: 50 mm Roller distance: 75 mm Motor overslide belts: SEW-Motor 3x 300-500V Motor Roller conveyors: Interroll EC300 24V Height frame: 245 mm Currently set high: 620 mm Pneumatic overslide belts Pneumatic end stop Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Optionally available: Side guide one and both sides Features: nominal voltage: 24V, 380-500V condition: very good (used) Conveying length in mm: 750 Nominal / outside width in mm: 485 Roll width in mm: 425 Roll division in mm: 75 Driven: YES Engine type: SEW Eurodrive , Interroll EC 300 Conveyor speed m / s ...

Total length with gutter for cooling liquid mm 15000 Overall width mm 11380 Overall height mm 5780 Grinding width mm 2500 Clamping surface of the table mm 4500х2240 Distance between columns mm 2680 Maximum length of grinding mm 4000 Grinding length at table speed 1-40 m/min Grinding height mm 1250 Number of T-shaped slots pcs. 9 Distance between T-shaped slots mm 36 H 12 T-slot width mm 8x250 Workpiece weight kg 40 000 Machine weight kg 125 000