slewing used for sale

Slewing ring, slewing ring, ball slewing ring, slewing gear PAGUS Ø 1100 mm x 80 mm Upper ring: Outer diameter: Ø 1125 mm, bolt circle diameter: Ø 1075 mm Lower ring: Outer diameter: Ø 1100 mm, bolt circle diameter: Ø 1060 mm Inner diameter: Ø 975 mm Height: 80 mm 8x bore: Ø 17.5 mm per ring As good as new ! Dimensions: 1125 x 1125 x 80 mm

Slewing ring, slewing ring, ball slewing ring, slewing gear PAGUS Ø 485 mm x 42 mm Upper ring: Outer diameter: Ø 595 mm, Bolt circle diameter: Ø 505 mm 6x Bore: Ø 9 mm Lower ring: Outer diameter: Ø 655 mm, Bolt circle diameter: Ø 625 mm 6x Threaded hole: M8 x 1.25 ( in groups of 2, hole spacing: 50 mm ) inner diameter: Ø 485 mm height: 42 mm used, tested ! Dimensions: 655 x 655 x 42 mm

Slewing ring, thrust bearing, slewing gear, slewing ring TORRIANI GIANNI Ø 518 / 304 mm Inner diameter: Ø 304 mm Outer diameter: Ø 518 mm bolt circle diameter ( inner ): Ø 332 mm bolt circle diameter ( outer ): Ø 490 mm height: 56 mm all holes: Ø 18 mm Flanchj area:12 mm (thick inside and outside) used, tested ! Dimensions: 520 x 520 x 60 mm

Wall slewing crane, hall slewing crane, hall crane, workplace crane -Manufacturer: Abus, wall slewing crane type LW, load capacity 125 kg -Throat: 2000 mm -Swivel range: 270° -Chain hoist: ABUS type GM 2 125.8-1 -Lifting speed: 2.00/8.00 m/min -Chain length: 3.16 m -Transport dimensions: 2165/740/H300 mm -Weight: 86 kg

toothed belt pulley, Slewing ring -Slewing ring: with toothed belt pulley -Slewing ring: Ø 520 mm -Pulley: Ø approx. 370 mm -Belt width: 80 mm -Sockets: bolt circle Ø 490 mm Ø 18 / M16 -Measurements: see photos -Dimensions: Ø 520 x 200 mm -Weight: 79 kg

Slewing bearings, slewing ring, single row ball slewing ring, four-point bearings -Comes from: HUSS Rides manufacturer of leisure facilities -Spare part: from -Manufacturer: INA -Type: VLA200544-N -Outer diameter: 640.3 mm -Interior diameter: 434 mm -Height: 56 mm -externally toothed -Teeth: 105 -Module: 6 mm -Number: 6x bearings available -Price: per piece -Weight: 39 kg/piece

Slewing bearings, slewing ring, single row ball slewing ring, four-point bearings -Comes from: HUSS Rides manufacturer of leisure facilities -Spare part: from Flic Flac connection from gondola -Manufacturer: IMO -Type: 001625 -Type: IMO 33/95 -Outer diameter: 624 mm -Inner diameter: 355 mm -Height: 98 mm -Number: 2x bearings available -Price: per piece -Weight: 118 kg

Slewing bearings, slewing ring, single row ball slewing ring, four-point bearings -Comes from: HUSS Rides manufacturer of leisure facilities -Spare part: from -Manufacturer: Rothe Erde -Type: 060200504-000 -Outer diameter: 576 mm -Interior diameter: 429 mm -Height: 50 mm -Number: 2x bearings available -Price: per piece -Weight: 42 kg

Slewing bearings, slewing ring, single row ball slewing ring, four-point bearings -Comes from: HUSS Rides manufacturer of leisure facilities -Spare part: from Top Junior 70011-15 -Manufacturer: Rothe Erde -Type: 2-060-40-0490-001 63132-609 -Type: 2.060.40.0490.001 63132.609 -Outer diameter: 625 mm -Inner diameter: 354 mm -Height: 90 mm -Number: 4x bearings available -Price: per piece -Weight: 122 kg

Wall slewing crane, hall slewing crane, hall crane, workplace crane -Manufacturer: Abus, wall slewing crane type VW, load capacity 1000 kg -Throat: 5230 mm -Swivel range: 270° -Chain hoist: ABUS -Lifting speed: 1.30/5.00 m/min -Chain length: 3.35 m -Transport dimensions: 5300/1450/H1320 mm -Weight: 750 kg

Column crane, slewing crane, column slewing crane used Manufacturer: VETTER (presumably) Type: WIZARD AS10-5.0 (presumably) Year of construction 5/2006 Payload 1000 kg Swivel range 270° Projection from column: approx. 5.4 m, boom profile height approx. 37 cm Bottom edge boom to floor: approx. 3.8 m Total height: approx. 4.3 m Base plate diameter approx. 1.2 m The previous owner has mounted a smaller base plate. In order to really use the 1000 kg, a 1450 mm base plate must be mounted (as can also be seen on the type plate)

Column slewing crane, hall crane, workplace crane -Column slewing crane: load capacity: 400 kg, with foundation plate steel plate 550 x 550 mm -Throat: 1.750 mm -Total height: 3540 mm -Hook height: 2,490 mm -with chain hoist: SWF type SKB0801205OHX4005 built in 2003 -Main stroke: 8.0 m/min -Fine stroke: 2.0 m/min -Swivel range: 270° -Transport dimensions: 3540/800/H590 mm -Weight: 300 kg

Column slewing crane, hall crane, workplace crane -Manufacturer: Certex, column slewing crane type CA7118 load capacity 2000 kg -Base plate: Ø 810 mm - Throat: 5,060 mm -Total height: 3755 mm -Hook height: 2,615 mm -Chain hoist: Vink LIsse SIE7E -Main stroke: 4 m/min -Fine stroke: 1 m/min -Chain length: 3440 mm -Lifting movement: electric -Swivel/sliding movement: hand-operated -Transport dimensions: 5600/1300/H2000 mm -Town weight: 1286 kg

Column slewing crane, hall crane, workplace crane -Manufacturer: DEMAG, column slewing crane, load capacity 250 kg -Base plate: 375 x 375 mm -Throat: 3,040 mm -Total height: 3015 mm -Hook height: 2,100 mm -Chain hoist: DEMAG type PK2N-F -Main stroke: 10 m/min -Fine stroke: 2.5 m/min -Chain length: 2300 mm -Transport dimensions: 3090/800/H540 mm -Town weight: 203 kg

Column slewing crane, hall crane, workplace crane -Manufacturer: DEMAG, column slewing crane, load capacity 250 kg -Base plate: 450 x 450 mm -Throat: 4,060 mm -Total height: 3,515 mm -Hook height: 2,500 mm -Chain hoist: DEMAG type PK2N-F -Main stroke: 10 m/min -Fine stroke: 2.5 m/min -Chain length: 2800 mm -Transport dimensions: 4130/800/H500 mm -Town weight: 476 kg

Column slewing crane, indoor crane, workplace crane -Manufacturer: Vetter, pillar slewing crane type M capacity 1500 kg -Base plate: Ø 695 mm - Projection: 5,140 mm -Total height: 5,605 mm -Hook height: 4,320 mm -Chain hoist: GIS 150/F -Main lift: 4 m/min -Fine stroke: 1 m/min -Chain length: 4900mm -Transport dimensions: 5420/1230/H1950 mm -Own weight: 1320 kg

Column slewing crane, indoor crane, workplace crane -Manufacturer: Vetter, column slewing crane type M load capacity 1000 kg -Base plate: Ø 610 mm -Outreach: 4,960 mm -Total height: 5,570 mm -Hook height: 4,420 mm -Chain hoist: SWF 10/F with main and fine lift -Chain length: 4730mm -Transport dimensions: 5970/1870/H660 mm -Own weight: 1379 kg

Column slewing crane, indoor crane, workplace crane -Manufacturer: DEMAG, pillar slewing crane load capacity 250 kg -Base plate: 550 x 550 mm -Projection: 2,860 mm -Total height: 5110 mm -Hook height: 3170 mm -Swivel range: 270° -Chain hoist: can be supplied at extra cost -Transport dimensions: 5110/800/H550 mm -Weight: 380 kg

Intermediate plate for pillar slewing crane, crane foundation plate, indoor crane, workplace crane, crane foundation plate -Pillar slewing crane: intermediate plate/base plate, outside: Ø 1200 mm -Type: ST160 VP1200/DL530 422632 S235 JR -Thickness: 40mm -Bolt circle inside: Ø 530 mm -Outer bolt circle: Ø 1160 -Number: 2x foundation plate available -Price per piece -Weight: 388 kg

Column slewing crane, hall crane, workplace crane -Manufacturer: Vetter, column slewing crane type M, load capacity 500 kg -Base plate: Ø 610 mm -Throat: 5,990 mm -Total height: 3,900 mm -Hook height: 2,960 mm -Chain hoist: Mannesmann Demag PK 2 NF -Main stroke: 5 m/min -Fine stroke: 1.25 m/min -Chain length: 3200 mm -Transport dimensions: 6500/1040/H1830 mm -Town weight: 810 kg

weight max. in kg: 1000 kg arm length: 4000 mm height: 3000 Unterkante Ausleger total column height: 3790 mm swivelling range: 270 Grad weight: 560 kg Description: - Trolley power supply - Trailing cable, cable slack approx. 800 mm - Operation from the hallway using a pendant control including: - ABUS electric chain hoist - Chain hoist type GM 4 1000.5-2, 2-leg - painted in color RAL 5017 traffic blue - Load capacity 1 t - hook path 3000 mm - highest hook position 2442 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1.3 / 5 m / min - Lifting capacity 0.22 / 0.9 kW - duty cycle 60% ED - Circuits 360 c / h Overload protection The crane system complies with the requirements of the Machinery Directive 2006/ 42 / EC as well as the currently valid UV regulations DGUV regulation 52 (formerly BGV D6). included : - Anchor rods L200 (set) size LS 200 - C ...

weight max. in kg: 500 kg arm length: 4000 mm height: 3425 Unterkante Ausleger total column height: 4215 mm swivelling range: 270 Grad Description: - Trolley power supply - Trailing cable, cable slack approx. 800 mm - Operation from the hallway using a pendant control including: - ABUS electric chain hoist - Chain hoist type GM 2 500.4-2, 2-leg - painted i color RAL 5017 traffic blue - load capacity 500 kg - hook path 3000 mm - highest hook position 2965 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1/4 m / min - Lifting power 0.09 / 0.35 kW - duty cycle 60% ED - Circuits 360 c / h Overload protection The crane system complies with the requirements of the Machinery Directive 2006/ 42 / EC as well as the currently valid UV regulations DGUV regulation 52 (formerly BGV D6). included : - Anchor rods L200 (set) size LS 200 - Consists of 8 pieces M ...

There are a 500kg-column-mounted slewing crane and a 250kg crane traverse Carl Stahl available.

Denison Hydraulic P7P Slewing and Luffing Pump available for Sale. Make: Denison - Hydraulic 4Pcs Type: P7P 3R1A 5A2 B M2 04994 Serial Number: 89127 2912 49 7138 Rotation: 201024 Code No.: 023 04994 USA

CCM turret bearing / Slewing bearing Drawing: 190.40.4140.000.41.1502 Dimensions / Dimensions: 4405 / 3886 x 222 mm

Intermediate plate for pillar jib crane, crane foundation plate, indoor crane, workplace crane, crane foundation plate -Pillar slewing crane: intermediate plate / base plate, outside: O 1050 mm -Thickness: 40mm -Hole circle inside: O 530 mm / M27 thread -Pitch circle outside: O 1010/15 mm -Net weight: 218 kg

Wall-mounted slewing crane Manufacturer: WEWIRA Type: WWH 180x2500 Year of construction: 2015 Load capacity: 250 kg Beam length: 2,500 mm Trolley Manufacturer: SWF H-type: CA-085. 1P-Y Year of construction: 2015 Load capacity: 250 kg

Column-Mounted Crane DEMAG Capacity 500 kg Arm travel 3400 mm Manual arm rotation Column height 3000 mm Column base diameter 700 mm - with base discs (see photo) Electric hoist I beam dimensions: 220 x 100 mm (see photo) Total weight approx 2 T MACHINE IN OUR STOCK IN FRANCE.

arm length: 4500 mm total column height: 4200 mm weight max. in kg: 500 kg bottom edge arm: 3200 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Column-Mounted Crane VERLINDE type XC2 Capacity 500 kg Column Ø 250 mm Column height 4400 mm Height under arm 3700 mm Trolley useful length 2700 mm Delivery with one fixing plate Ø 810 mm (see photo) Weight Total weight approx 2 T MACHINE IN OUR STOCK IN FRANCE.

arm length: 4000 mm weight max. in kg: 500 kg swivelling range: 180 Grad total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m with wall bracket The techn. Data are manufacturer or operator information and are therefore not binding for us. We reserve the right to prior sale, only our terms and conditions apply. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

arm length: 4000 mm weight max. in kg: 500 kg swivelling range: . Grad total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 44 with wall bracket The techn. Data are manufacturer or operator information and are therefore not binding for us. We reserve the right to prior sale, only our terms and conditions apply. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

arm length: 4000 mm total column height: 4200 mm weight max. in kg: 500 kg bottom edge arm: 3200 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

arm length: 5000 mm total column height: 4200 mm weight max. in kg: 500 kg bottom edge arm: 3200 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 250 kg arm length: 4000 mm height: 3425 Unterkante Ausleger total column height: 4.025 mm swivelling range: 270 Grad Description: - Load capacity 250 kg - projection 4000 mm - Construction height 4025 mm - Crane lacquer in color RAL 1007 daffodil yellow - Calculation basis DIN 15018 - Crane classification H2 / B2 - Operating location hall operation - Size / bracket profile LS36 / FormC 110x90 - Height of the lower edge of the boom 3425 mm - Operating voltage 3 / PE ~ 50 Hz 400 V - Direct control type of control - Degree of protection IP55 - Swivel range, nominally 270 ° - Panning by hand including: - Anchor rods size LS 36 - Consists of 8 pieces M24 mm x 800 mm, with 1 steel template (420/8) for - Fastening to the foundation, including accessories Electric chain hoist: - Chain hoist type GM 2 250.6-1, 1-leg - painted in color RAL 5017 - traffic blue - Load capacity 25 ...

height of hook: 3.500 mm arm length: 2.400 mm stroke: 1.000 kg weight of the machine ca.: 1,4 t 2 available: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

arm length: 2.200 mm height of hook: 2.600 mm weight of the machine ca.: 1,8 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. load: 125kg, arm length: 3000mm, height: 2400mm, with Chain Hoist Mannesmann Demag PK 1N.

Hydraulic lifting crane with two supporter feet, and a turntable Splited telescopic cranehand, without hydraulic power supply. Manufacturer: ATLAS Load Capacity: 2,0 t Horizontal Reach: 6,0 m Reach height: 5,0 m

Max. load: 2t, arm length: 3000mm, height: 3200mm, with Chain Hoist Mannesmann Demag PK 1N.

Max. load: 1t, max. arm length: 3000mm, column diameter: 410mm, height: 3760mm, lifting speed: 16m/min, need a 1x1x1m³ foundation, an on-site inspection is possible.

Type M, Factory No. 15864 Load capacity 3200 kg Projection 4000 mm UK beam 4820 mm YOC 1998 engine. Pan 360 degrees Chain hoist Liftket YOC 2014 type 3200/ 2-5/1,25 Factory No. E 33594 With motor. Chassis EF 320 , 24 V Prufbuch, acceptance examination etc. Crane was dismantled on 30.11.2022

Manufacturer: MKG Maschinen- und Kranbau GmbH Type: HMK340TA2 Factory No. 980-555 Year of construction: 1992 Vehicle is fully functional. Hydraulic system currently shows no leakage. Battery is in good condition. Crane vehicle can be supplied externally with high voltage current for continuous operation. Mechanically and technically in order. The wheels and castors would have to be renewed. Vehicle is now available...

Column Mounted Crane 2 T MANUTENTION CONNECTION type PFSP Capacity: 2 Tons Arm travel: 2000 mm Year of construction: 2001 Column diameter: 400 mm Max height under hook 2200 mm Column height: 3100 mm Height under beam 2800 mm Electric hoist 2 T

Boom 5 +6 m 2 pcs available ABUS GM 3 chain hoist, complete with underlays

offer 22484 Technical data approx.: - Load capacity 250 kg - E. chain hoist ABUS 250 kg - 2 lifting speeds 1.8 + 7.2 m/min - Outreach approx. 2000 mm - Hook height approx. 3000 mm - Swivel radius approx. 360 ° - Undercut booms 3500 mm - Total height approx. 3700 mm - Stand stand / bucket approx. 1100 x 1100 mm - Total length approx. 3100 mm - Bucket weight with filling approx. 3400 kg - Total weight approx. 3900 kg

built 2009 - last recurring examination 10/21 - complete with test book, declaration of conformity, acceptance test, etc. - Boom 6 m, up to 400 kg - Chain hoist Star Liftket BF 021/51 500/2 - 4/1 - complete with wall brackets, cable drag, etc.

Projection approx.1800 mm Load capacity 500 kg Lifting unit from LIFTKET including transport packaging ( see pictures ) Lattice box, 2 x pallets

Pillar jib crane, indoor crane, workplace crane -Manufacturer: VEB, pillar jib crane, load capacity 250 kg -Base plate: 440 x 440 mm -Projection: 1,800 mm -Total height: 2,700 mm -Hook height: 2,490 mm -Chain hoist: VEB type 250F -Main stroke: 6.0 m / min -Fine stroke: 1.5 m / min -Transport dimensions: 2530/800 / H440 mm -Own weight: 272 kg

Pillar jib crane, indoor crane, workplace crane -Load capacity: 500 kg -with chain hoist: SWF type 50/F -Year of construction: 1980 -Main stroke: 4.5 m/min -Fine stroke: 0.75 m/min -Projection: 3000 mm -Total height: 3760 mm -Hook height: 2940 mm -Swivel range: 360° -Transport dimensions: 3490/1100/H1400 mm -Own weight: 748 kg