skoda w used for sale

table length: 1400 mm table width: 1400 mm table height: 900 mm table load: 3000 Kg weight of the machine ca.: 0,5 t dimensions: 1,4 x 1,4 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mm table width: 1000 mm table height: 900 mm table load: 3000 Kg weight of the machine ca.: 0,45 t dimensions: 2,0 x 1,0 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 1150 mm width: 610 mm height over floor: 910 mm table load capacity: max. 450 Kg dimensions: 1170 x 640 x 135 m weight: 47 kg Total dimensions including back panel 115 x 61 x 140 cm. Internal dimensions of the top 2 drawers 44 x 40 x 9 cm. Inner dimensions of the lower drawer 92 x 40 x 9 cm. Lower shelf dimensions 115 x 65 cm. Dimensions of the tool board with holes for hooks 115 x 50 cm. LED fluorescent beam width 50 mm. Power of the LED fluorescent tube 9 watts. ( IP20 ) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mm table width: 1200 mm table height: 900 mm table load: 3000 Kg weight of the machine ca.: 0,64 t dimensions: 2,4 x 1,2 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional Surcharge for 25mm material thickness: 340, -EUR The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mm table width: 1200 mm table height: 850 - 900 mm weight of the machine ca.: 0,65 t dimensions: 2,4 x 1,2 x 0,95 m Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Side panels 165mm Bottom ribbed for reinforcement. Incl. floor bearing Accessories optional Surface evenness 0.2 - 0.4mm over 1000mm. - with drawer unit - Grid shelf - Heavy-duty castors steerable Welding accessories shown not included! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mm table width: 800 mm table height: 850 mm Vertikal stroke: 50 mm weight of the machine ca.: 0,19 t dimensions: 1,2 x 0,8 x 0,85 m Siegmund workstation including 2 drawers Premium Light, through hardened tool steel X8.7, plasma nitrided and BAR coated. Drilling Ø 28 mm, drilling surface 100x100 mm grid. Material thickness approx. 15 mm With the new workstation from Siegmund, you can create your ideal workplace in a modular system. The Siegmund Workstation can be individually adapted and expanded to meet your needs and wishes. Whether sawing, drilling or welding - the absolute all-rounder in every workshop! Consisting of: 1x 004002 (Siegmund Workstation) 1x 804004.X7 (perforated plate) 1x 284030 (clamp holder) 1x 004020 (shelf) 1x 284035 (bolt and prism holder) 1x 004025 (tool wall including shelf) 2x 004210 (drawer) Spacer ring 800653.N is required for clamping with  ...

number: 10 Stk. clamping range: 15 - 50 mm : 28 mm weight: 10 kg dimensions: 0,3 x 0,3 x 0,2 m Basic set 4 / 53 pieces for table top thickness 15mm and 25mm 6 pcs screw clamps 14 pcs. quick clamping bolts 2 pcs. universal stop 100mm 6 pcs. universal stop 150mm 6 pcs. universal stop 225mm 2 pcs. universal stop 300mm 6 stop and clamping angles 175mm 4 stop and clamping angles 275mm 2 pcs. prisms 60mm 1 piece torch holder 1 pc. Eccentric stop 100mm diameter 1 piece perforated brush 30mm 2 pieces separating lotion 500ml, on a natural, biological basis 2 pcs. Welding table cleaner 500ml, on a natural, biological basis The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 53 Positionen weight: 45 kg condition: neu 0 Basic set 4 / 53 pieces for table top thickness 15mm and 25mm 6 pcs screw clamps 14 pcs. quick clamping bolts 2 pcs. universal stop 100mm 6 pcs. universal stop 150mm 6 pcs. universal stop 225mm 2 pcs. universal stop 300mm 6 stop and clamping angles 175mm 4 stop and clamping angles 275mm 2 pcs. prisms 60mm 1 piece torch holder 1 pc. Eccentric stop 100mm diameter 1 piece perforated brush 30mm 2 pieces separating lotion 500ml, on a natural, biological basis 2 pcs. Welding table cleaner 500ml, on a natural, biological basis The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 32 Positionen weight: 35 kg Basic set 2 / 32 pieces for table top thickness 15 and 25 mm 6 pieces screw clamps 12 pieces quick clamping bolts 2 pieces universal stop 100 mm 4 pieces universal stop 150 mm 2 pieces universal stop 225 mm 2 pieces stop and clamping angle 175 mm 1 piece hole brush 300 mm 1 piece burner holder 1 piece non-stick spray 500 ml, natural, biologically based 1 piece welding table cleaner 500 ml, natural, biologically based The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mm table width: 800 mm table height: 850 mm Vertikal stroke: 40 mm weight of the machine ca.: 0,18 t dimensions: 1,2 x 0,8 x 0,85 m Special offer ! Siegmund Workstation incl. 2 drawers + tool set B Through hardened tool steel, bore Ø 16 mm Holes surface 50x50 mm grid, material thickness approx. 11.5 - 13 mm. Consisting of: 1x 004002 (Siegmund Workstation) 1x 164004.X07 (perforated plate) 1x 164030 (clamp holder) 1x 004020 (shelf) 1x 164035 (bolt and prism holder) 1x 004025 (tool wall including shelf) 2x 004210 (drawer) 4x 160620 (clamp) 8x 160511 (double quick release bolts without groove) 6x 160412 (stop) 2x 160108.N (angle) 1x 160852 (Allen key) 1x 164301 (vice) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mm table width: 1200 mm table height: 900 mm table load: 3000 Kg weight of the machine ca.: 0,32 t dimensions: 1,2 x 1,2 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 20 t stroke: 180 mm daylight between the columns: 540 x 100 mm dayligth: max. 990 mm : 72 mm diameter of piston: 48 mm weight of the machine ca.: 0,12 t dimensions of the machine ca.: 0,8 x 0,7 x 1,8 m Our frame presses are officially CE certified according to the latest rules. Almost all presses offered in this area are not CE certified. - with manual hydraulics - Move the cylinder sideways - Pressure gauge - 2 press documents The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 10 t stroke: 180 mm daylight between the columns: 335 x 115 mm dayligth: max. 340 mm : 56 mm diameter of piston: 40 mm weight of the machine ca.: 0,05 t dimensions of the machine ca.: 0,75 x 0,53 x 1,6 m Our frame presses are officially CE certified according to the latest rules. Almost all presses offered in this area are not CE certified. - with manual hydraulics - Move the cylinder sideways - Pressure gauge - 2 press documents The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mm table width: 1200 mm table height: 850 - 900 mm weight of the machine ca.: 0,65 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional Surface flatness 0.2 - 0.4mm on 1000mm. The table can be moved with a pallet truck. Pallet truck is not included in the scope of delivery The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2900 mm table width: 1200 mm table height: 900 mm table load: 3000 Kg weight of the machine ca.: 0,77 t dimensions: 2,9 x 1,2 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 43 Positionen weight: 40 kg condition: neu 0 Basic set 3 / 43 pieces for table top thickness 15mm and 25mm 6 pcs screw clamps 12 pcs. quick clamping bolts 6 pcs. universal stop 150mm 6 pcs. universal stop 225mm 2 stop and clamping angles 175mm 2 stop and clamping angles 275mm 2 pcs. prisms 60mm 1 piece torch holder 1 pc. Eccentric stop 100mm diameter 1 piece perforated brush 30mm 2 pieces separating lotion 500ml, on a natural, biological basis 2 pcs. Welding table cleaner 500ml, on a natural, biological basis The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mm table width: 800 mm table height: 840 - 890 mm weight of the machine ca.: 0,3 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional Surface flatness 0.2 - 0.4mm on 1000mm. The table can be moved with a pallet truck. Pallet truck is not included in the scope of delivery The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 1200 mm width: 600 mm height over floor: 860 mm table load capacity: Kg dimensions: 1200 x 600 x 400 m weight: 49 kg Workbench with 5 drawers and solid wood worktop Dimensions 1200 x 600 x 870mm Drawer dimensions (internal) 430 x 400 x 110 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mm table width: 800 mm table height: 850 mm Vertikal stroke: 40 mm weight of the machine ca.: 0,26 t dimensions: 1,2 x 0,8 x 0,85 m Special offer ! Siegmund workstation incl. 2 drawers + tool set B high quality steel S355J2 + N, plasma nitrided and BAR-coated Boreholes Ø 22 mm, boreholes surface 100x100 mm grid Material thickness approx. 17 - 19 mm Consisting of: 1x 004002 (Siegmund Workstation) 1x 224004.P (perforated plate) 1x 224030 (clamp holder) 1x 004020 (shelf) 1x 224035 (bolt and prism holder) 1x 004025 (tool wall including shelf) 2x 004210 (drawer) 4x 220610.1 (clamp) 8x 220511 (double quick release bolts without groove) 6x 220410.N (stop) 2x 220110.N (angle) 1x 220852 (Allen key) 1x 004303 (vice) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1300 mm table width: 800 mm table height: 920 - 1000 mm : 1000 kg height of stroke: 510 - 1550 mm total connected load: 1,5 kW connected load frequency: 230 V weight of the machine ca.: 0,55 t Welding table on lifting table: Hole diameter: 28mm The table is made of 15mm thick S355 steel The surface is stained and oiled. Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides. Side panels 150 x 10mm Ribbed bottom for reinforcement. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2990 mm table width: 1490 mm table height: 850 - 900 mm weight of the machine ca.: 0,8 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional Surface flatness 0.2 - 0.4mm on 1000mm. The table can be moved with a pallet truck. Pallet truck is not included in the scope of delivery The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wire guide elements for metal, spacing 100-200 mm, 15 mm longer Using these wire guide elements reduces the diameter of the workpieces that can be machined. Suitable for Vollmer machine types: QWD 76 P / QWD 750 / QWD 760 / QWD 750 H / QWD 760 H / VPulse 500

Electric Hammelmann HDP 127 high-pressure system on trailer – 1,000 bar / 48 l/min – 110 kW For sale is a high-performance electric Hammelmann high-pressure system of the type HDP 127. The system is mounted on a braked trailer and equipped with a soundproof hood. Technical data: Manufacturer: Hammelmann Pump type: HDP 127 Year of manufacture of high-pressure pump: 2012 Trailer year: 2012 Operating hours: 3,693 h Maximum working pressure: 1,000 bar Flow rate: 48 l/min Built-in electric motor: 110 kW Power supply: 400 V / 50 Hz Engine speed: 1,500 rpm Pump speed: 440 rpm Plunger diameter: 30 mm Maximum water temperature: 40 °C Permissible total weight: 3,500 kg Tyres: 195/70 R15 103 K Ball Coupling Braked trailer Soundproofing enclosure The system is suitable for demanding industrial cleaning work, surface treatment and other professional high-pressure a ...

Automatic side sealing machine for shrinkwrapping packaging. Suitable for very large/wide products. Ideal to be combined with SHRINKtunnel-POF-Xtra Wide. Suitable for fully automated inline production. Automatic and manual infeed possible. - Specifications: max. speed of the machine in neutral: 20 cycles/minute | max. product dimensions: unlimited length, W+H

Fully automatic L-sealer, PRO version, for shrink wrapping packaging. Automatic infeed and outfeed of product. - Technical specifications: 220V, 2.5kW | 6Bar / 0,1m?/min | max. speed of the machine in neutral: 30 cycles/minute | max. product dimensions (mm): L(100-450)xW(60-350)xH(5-120) | machine dimensions (mm): L1790xW845xH1550 | weight (net/gross): 350/450kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Automatic side sealing machine for shrinkwrapping packaging. Ideal to be combined with SHRINKtunnel-POF-L. Suitable for fully automated inline production. Automatic and manual infeed possible. - Specifications: max. speed of the machine in neutral: 35 cycles/minute | max. product dimensions: unlimited length, 300mm width, 150mm height | weight (net/gross): 400/500kg | power: 220V, 2kW | air: 5.5 bar/0.1m?/min | L1680xW960xH1500mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Fully automatic L-sealer for shrink wrapping packaging. Ideal to be combined with SHRINKtunnel-POF-L. Automatic infeed and outfeed of product. - Technical specifications: 220V, 2.5kW | 5.5 bar / 0,1m?/min | max. speed of the machine in neutral: 30 cycles/minute | max. product dimensions (mm): L450xW350xH130 | machine dimensions (mm): L1700xW960xH1400 | weight (net/gross): 290/420kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

L-Sealer for shrink wrap packaging, PRO version with strong sealing bar for continously precise packaging results. For larger sized product sizes, semi-automatic (manual infeed of product, automatic outfeed). Suitable to be combined with AMTEC SHRINKtunnel-POF-XXL PRO-Version - Technical specifications: 220V, 7kW | compressed air not necessary | max. speed of the machine in neutral: 20 cycles/minute | max. product dimensions (mm): L(100-850)xW(100-650)xH(2-280) | max. weight of the product: depending on the dimensions of the product or rather how the weight is distributed on the feed table | machine dimensions (mm): L2410xW1095xH1515 | weight (net/gross): 200-250kg. In case of heavy products we will gladly producing a sample packaging of your product, either to confirm that the machine is able to handle your product or to offer you other machines for your packaging task. In semi-automati ...

L-Sealer for shrink wrap packaging, for extremely large sized product, semi-automatic (manual infeed of product, automatic outfeed) with manually operated closing mechanism of L-bar sealer (no compressed air required). Suitable to be combined with AMTEC SHRINKtunnel-POF-XTRA (for very large/wide products). - Technical specifications: 220V, 4.0kW | max. speed of the machine in neutral: 15 cycles/minute | max. product dimensions (mm): L1150xW870xH350 (sealing blade length: L1200xW900mm) | max. weight of the product: depending on the dimensions of the product or rather how the weight is distributed on the feed table | machine dimensions: L2840xW1560xH1310mm | weight (net/gross): 350/400kg. In case of heavy products we will gladly producing a sample packaging of your product, either to confirm that the machine is able to handle your product or to offer you other machines for your packaging t ...

L-Sealer for shrink wrap packaging, for extremely large sized product, semi-automatic (manual infeed of product, automatic outfeed) with manually operated closing mechanism of L-bar sealer (no compressed air required). Suitable to be combined with AMTEC SHRINKtunnel-POF-XXTRA (for very large/wide products). - Technical specifications: 380V, 5.0kW | max. speed of the machine in neutral: 15 cycles/minute | max. product dimensions (mm): L1750xW960xH280 (sealing blade length: L1850xW1050mm) | max. weight of the product: depending on the dimensions of the product or rather how the weight is distributed on the feed table | machine dimensions: L3640xW1715xH1510mm | weight (net/gross): 450/550kg. In case of heavy products we will gladly producing a sample packaging of your product, either to confirm that the machine is able to handle your product or to offer you other machines for your packaging ...

L-Sealer for shrink wrap packaging, PRO version with strong sealing bar for continously precise packaging results. For middle sized product sizes, semi-automatic (manual infeed of product, automatic outfeed). Suitable to be combined with AMTEC SHRINKtunnel-POF-L PRO-Version - Technical specifications: 220V, 4kW | compressed air not necessary | max. speed of the machine in neutral: 20 cycles/minute | max. product dimensions (mm): L(100-500)xW(100-400)xH(2-280) | max. weight of the product: depending on the dimensions of the product or rather how the weight is distributed on the feed table | machine dimensions (mm): L1765xW810xH975 | weight (net/gross): 150-200kg. In case of heavy products we will gladly producing a sample packaging of your product, either to confirm that the machine is able to handle your product or to offer you other machines for your packaging task. In semi-automatic ma ...

Economical L-Sealer for wrapping large sized products in shrink film. Semi-automatic version (manual product feeding and sealing, automatic product outfeed). - Technical specifications: 220V, 1.5kW | compressed air not necessary | max. speed of the machine in neutral: 20 cycles/minute | max. product dimensions (mm): L750xW600xH300 | max. weight of the product: depending on the dimensions of the product or rather how the weight is distributed on the feed table | machine dimensions (mm): L1800xW855xH1100 | weight (net/gross): 135/185kg. In case of heavy products we will gladly producing a sample packaging of your product, either to confirm that the machine is able to handle your product or to offer you other machines for your packaging task. In semi-automatic machines, the number of cycles is to be understood as an operator-dependent value and additionally based on experience. Please note  ...

L-Sealer for shrink wrap packaging, for very large sized product, semi-automatic (manual infeed of product, automatic outfeed) with pneumatic closing mechanism of L-bar sealer. Suitable to be combined with SHRINKtunnel POF-XXL. - Technical specifications: 220V, 2.0kW | compressed air: 5.5bar, 0.1m? | max. speed of the machine in neutral: 20 cycles/minute | max. product dimensions (mm): L900xW600xH300 (can be varied on demand) | max. weight of the product: depending on the dimensions of the product or rather how the weight is distributed on the feed table | machine dimensions depending on actual packaging size required | weight (net/gross): 210/250kg. In case of heavy products we will gladly producing a sample packaging of your product, either to confirm that the machine is able to handle your product or to offer you other machines for your packaging task. In semi-automatic machines, the  ...

Economical L-Sealer for wrapping middle sized products in shrink film. Semi-automatic version (manual product feeding and sealing, automatic product outfeed). - Technical specifications: 220V, 1.2kW | compressed air not necessary | max. speed of the machine in neutral: 20 cycles/minute | max. product dimensions (mm): L450xW400xH300 | max. weight of the product: depending on the dimensions of the product or rather how the weight is distributed on the feed table | machine dimensions (mm): L1560xW760xH1040 | weight (net/gross): 125/175kg. In case of heavy products we will gladly producing a sample packaging of your product, either to confirm that the machine is able to handle your product or to offer you other machines for your packaging task. In semi-automatic machines, the number of cycles is to be understood as an operator-dependent value and additionally based on experience. Please note ...

Packaging line for the production and packaging of wet wipes, e.g. hygiene wipes, cleaning wipes, baby wipes, disinfecting wipes. The production process includes unwinding of the nonwoven from the jumbo roll, slitting for a 2-lane production process (until packaging), dipping into liquid, longitudinal folding in Z- or W-fold, cross cutting (tissue length), 1 x cross folding, stacking, continue to packaging unit which handles film feeding and wrapping wet wipes, punching the hole (to open the pack), positioning of reclosable label, bag cutting/heat sealing. Integrated splice units increase efficiency during material, film and label role changeover. - Specifications: suitable for dry nonwovens (airlaid, spunlaid) | folds: Z or W shape (change of folding tool necessary) | fold face adjustable per side | dimensions of folded tissue: L(70-100)xW(40-100) mm | dimensions of unfolded tissue: L(1 ...

Packaging machine for the production and packaging of wet wipes, e.g. hygiene wipes, cleaning wipes, disinfection wipes. The production process includes folding and cutting the wipes, moistening with one or more different liquids, packaging the wet wipe in a 3-side sealed or 4-side sealed pouch. Production of up to 4 chain bags possible. Included is a dosing pump, a perforating tool, a tear notch tool, 2 character sets for cold and hot printing (14 characters each), an outfeed belt (1,2m). SIEMENS PLC and Touch-Monitor. - Specifications: Bag sizes: L(50-125)xW(50-110)mm | suitable films: PET, OPP,BOPP ,AL, PE, CPP, laminated films | suitable for dry nonwovens (airlaid, spunlaid) | folds: max. 10 folds vertically and 4 folds horizontally | size of tissue, unfolded:L(40-220)xW(30-240)mm | Grammage wet wipe: 30-80g/m? | max. roll diameter: nonwoven: 1000mm, film: 350mm | filling range liqui ...

Packaging line for the production and packaging of wet wipes, e.g. hygiene wipes, cleaning wipes, baby wipes, disinfecting wipes. The line is constructed from a wet wipe production unit and a flow wrap unit. Wet wipes production process: Unwinding of the nonwoven from 2 jumbo rolls and slitting into 5 lanes per roll (until moistening) for a fast production method, longitudinal folding in Z or C-shape, moistening via several spraying nozzles, cross cutting (wipes length), stacking and forwarding to the packaging unit. The flow wrapping unit handles: feeding the wet wipes, feeding the film and printing (hot stamping), hole punching (to open the pack), positioning the reclosable label and e.g. a seal label (the integrated 2-lane labeler allows offset labeling), bag cutting/heat sealing. The liquid supply system for moistening the wipes consists of 2 tanks with continuously mixing agitators  ...

Packaging line for the production and packaging of wet wipes, e.g. hygiene wipes, cleaning wipes, baby wipes, disinfecting wipes. The line is constructed from a wet wipe production unit, a flow wrap unit and a unit for applying the reclosable lid. Wet wipes production process: Unwinding of the nonwoven from 2 jumbo rolls and slitting into 5 lanes per roll (until moistening) for a fast production method, longitudinal folding in Z or C-shape, moistening via several spraying nozzles, cross cutting (wipes length), stacking and forwarding to the packaging unit. The flow wrapping unit handles: feeding the wet wipes, feeding the film and printing (hot stamping), hole punching (to open the pack), positioning the reclosable label and e.g. a seal label (the integrated 2-lane labeler allows offset labeling), bag cutting/heat sealing and feeding to the lidding unit. The liquid supply system for mois ...

Manufacturer: Menzel Type of Machine: Washing Line Year of Manufacture: 2013 Technical Data Fabric Type: Warp knit, lace, Raschel goods, tricot Material Composition: - 100% Polyamide - 100% Polyester - Polyamide/Spandex (Elastane up to 30%) Dimensions & Weight: - Material Width: 2,200 – 3,200 mm - Roller Width: 3,400 mm - Fabric Weight: 50 – 265 g/m² Performance: - Production Speed: up to 40 m/min - Process: Spun oil removing, water-based washing Chemicals Used: - Oil-emulsifier - Washing/wetting agent - Alkali - Acetic acid for pH neutralization Steel Grades: - Lateral Frames: AISI 304 (V2A) - Parts in Contact with Media: AISI 316 (V4A) Machine Specs: - Unwinder Diameter: 1400 mm - Winder Diameter: 1800 mm Power & Utilities: - Voltage: 230/400 V, 50 Hz, 3 Phase - Steam Pressure: 4 – 6 bar - Compressed Air (Oil-Free): 6 – 7 bar - Water Pressure: 2  ...

number: 70 Positionen weight: 90 kg condition: neu : 28 mm WMT Set 7: 70-piece, 28mm system, consisting of: 3x Pipe clamps D28 90° – Item No. 4028397 3x Pipe clamps D28 180° – Item No. 4028396 3x Pipe clamps D28 45° – Item No. 4028398 3x Pipe clamps D28 300x150 – Item No. 4028399 3x Pipe clamps D28 300x200 – Item No. 4028400 15x Ball lock pins D28x50 – Item No. 4027663 10x Locking pins D28x80 – Item No. 4028876 4x Universal Stop D28 100x50x25 mm – Item No. 4028469 4x Universal Stop D28 150x50x25 mm – Item No. 4028470 4x Universal Stop D28 225x50x25 mm – Item No. 4027657 2x Universal Stop D28 300x50x25 mm – Item No. 4027659 2x Stop Clamping Angle D28 75x50x75x25 mm – Item No. 4028657 2x Stop Clamping Angle D28 175x50x75x25 mm – Item No. 4028658 2x Stop Clamping Angle D28 175x50x175x25 mm – Item No. 4028649 2x Stop Clamping Angle D28 175x50x75x25 mm – Item  ...

Hermann Waldner GmbH & Co. KG mobile depositor, type: MultiDos, machine number: 2371, year of construction: 2010, 230 / 400 V, 50 Hz, 18 kW, 32 A, weight: 750 kg, fillings: 3240 per hour, total dimensions: 3080 mm x 1420 mm x 2270 mm.

Weber Maschinenbau GmbH mobile skinning machine, type: ASE 553, number: 637, 380 V, 50 Hz, 0.4 kW, working width: 490 mm, total dimensions: 800 mm x 600 mm x 1020 mm.

WHEELED SCREW CONVEYOR to charge TANKER TRUCKS, for plastic granules, capacity ca.60 m3/h, Constructed in carbon steel with antirust painting, Outer Ø 300 mm, Bearing casing with dust seals, loading hopper 1.000 x 1.000 mm., 7,5 kw gearmotor, wheeled supporting structure, Total screw length 7,0 mt., Discharging height 4,5 mt., flexible pipe with capacity sensor on discharge, complete with control panel, CE compliance, Users manual, Electrical drawings., ALSO AVAILABLE IN STAINLESS STEEL VERSION, See other similar items with different features [GE751](.germanplast/listings/7506589-wheeled-tanker-loading-screw-con veyor-basic)[-GE753](.germanplast/listings/7553224-wheeled-tanker-load er-adj-height-with-automatic-retractable-sleeve)[-GE750](.germanplast/ listings/6874982-tanker-loading-system-60-m3-h-automatic-retractable-s leeve), installed power - used power in work: about 60-65% : 7,5,  ...

WHEELED TANKER TRUCKS LOADING SYSTEM, for plastic granules, Loading speed 60 m3/h, Made in sturdy painted carbon steel structure, including two big bag supporting structures, n.2 frames to fix the bags on the structure by lifting the pre-hooked frames, The height of the structures can be adjusted to suit the size of the big bags, and two side ladders provide easy access to the top of the structure., The two bags rest on safety supports to prevent hands from being crushed when the bottom is opened., Sturdy hooks hold the big bag straps in place., 1.000 x1000 mm. hopper to collect the material from the big bags., A flap door at the bottom, with a safety micro, facilitates maintenance and cleaning operations., the 7,5 kw driven screw will lift material from the hopper, Discharge height 4,5 m.from floor, Screw length 8.300 mm, The screw can be lowered for storage, The bearings are dust-tight ...

WHEELED SCREW CONVEYOR to charge TANKER TRUCKS, capacity ca.60 m3//h, Constructed in carbon steel with antirust painting, Outer Ø 300 mm, Bearing casing with dust seals, loading hopper 1.000 x 1.000 mm., 7,5 kw gearmotor, wheeled supporting structure, adjustable height by manual hydraulic pump, Total screw length 7,0 mt., Discharging height 4,5 mt., flexible discharging pipe with Capacity sensor, complete with control panel, CE compliance, Users manual, Electrical drawings., ALSO AVAILABLE IN STAINLESS STEEL VERSION, See also other versions with different features [GE752-](.germanplast/listings/7553190-wheeled-tanker-loader-7-mt-long -4-5-mt-discharging-point-or-bespoke)[GE753](.germanplast/listings/755 3224-wheeled-tanker-loader-adj-height-with-automatic-retractable-sleev e)-[GE750](.germanplast/listings/6874982-tanker-loading-system-60-m3-h -automatic-retractable-sleeve), capacity: 60 ...

TANKER TRUCK LOADING SYSTEM, for plastic granules, Loading speed 60 m3/h, Made in sturdy painted carbon steel structure, including two big bag supporting structures, n.2 frames to fix the bags on the structure by lifting the pre-hooked frames, The height of the structures can be adjusted to suit the size of the big bags, and two side ladders provide easy access to the top of the structure., The two bags rest on safety supports to prevent hands from being crushed when the bottom is opened., Sturdy hooks hold the big bag straps in place., 1.000 x1000 mm. hopper to collect the material from the big bags., A flap door at the bottom, with a safety micro, facilitates maintenance and cleaning operations., the 7,5 kw driven screw will lift material from the hopper, Discharge fixed height 4,5 m.from floor (or bespoke), Screw length 8.300 mm, The bearings are dust-tight and automatically greased., ...

Pasta machine WLS, Type Pressquick PQ 6-SU, Capacity approx. 50 kg/h, Capacity of the trough 12 kg, 2.2 kW press cylinder with continuous water cooling., DIOSNA S 120 2G dough kneading machine (has since been sold!), 100 drying baskets, JUWEL TS 120 drying cabinet, for pasta 200 - 400 kg in 12-36 hours, 8 drying programs, System was not in operation, Year of manufacture 2021

CINCINNATI-MILACRON TWIN SCREW EXTRUDER, for PVC profiles, extruder with 2 x 45 mm conical screws, average production 100 kg/h, 14 kw drive, for profiles with max width 250 mm., calibration desk with 2 pumps x 5 kw, caterpillar pull off unit, contact length 1500 mm, width250 mm., planetary saw, collection table, installed power - used power in work: about 60-65% : 14, capacity: 100 kg/h ca, screws: 45 mm. conical

TANKER TRUCK LOADING SYSTEM, for plastic granules, Maximum speed 60 m3/h, Made in sturdy painted carbon steel structure, including two big bag supporting structures, n.2 frames to fix the bags on the structure by lifting the pre-hooked frames, The height of the structures can be adjusted to suit the size of the big bags, and two side ladders provide easy access to the top of the structure., The two bags rest on safety supports to prevent hands from being crushed when the bottom is opened., Sturdy hooks hold the big bag straps in place., 1,000 x1000 mm. hopper to collect the material from the big bags., A flap door at the bottom, with a safety micro, facilitates maintenance and cleaning operations., the 7,5 kw driven screw will lift material from the hopper at a rate of 60 m3 per hour, the 300 mm.Ø screw can be lifted and lowered to easily move inside and outside., Maximum discharge heig ...

WEIGHING SYSTEM FOR BIG BAG SUPPORTING AND FILLING STATION, The system includes a sturdy painted carbon steel structure to hold 2 big bags, the pneumatic system to fill them from a source, a diverting valve set to fill the bags alternatively and automatically, a weighing platform on which tha bag rests, with loading cells and a digital scale to check and set the weight of each bag ., price options: new machine bespoke to project