127,266 used machines on RESALE, but how to find them? Machine Search
The line is designed for applying a six-color coating to the base with final packaging in consumer rolls. Non-woven or paper material can be used as a base, as well as other types of bases upon agreement with the manufacturer of the equipment. This equipment can produce the following groups of wallpaper: foamed vinyl in widths of 0.53 m and 1.06 m on paper and non-woven bases also paintable wallpaper. The line can be upgraded to produce an additional group of wallpapers – hot embossing (silkscreen printing). The manufacturing plant (Olbrich GmbH & Co, Germany) develops a project for installing a calender zone in this line upon individual request. GENERAL PARAMETERS OF PRINTING LINE: • Manufacturer: OLBRICH • Year of production and year of putting into operation – 2007. • Mechanical speed – 5-150 м/min. • Production speed - 60-110 м/min. • Effective power consump ...
centre distance: 8500 mm turning diameter over bed: 1070 mm turning diameter over slide rest: 800 mm spindle bore: 128 mm turning speeds: 1,12 - 1120 U/min Control: Alan Bradley 9-series total power requirement: 62 kW weight of the machine ca.: t dimensions of the machine ca.: m 3 Shear Bed, Carriage can bypass Steady Rest and Tailstock 6-position Sauter Turret 360 mm Capacity Self Centering Hydraulic Steady Rest 385 mm Capacity Rotaring Work Support (Used for Gun Barrels) 800 mm 4-Jaw Chuck Tailstock Quill diameter Ø 200 mm Tailstock Taper M.T. 6 Chip Conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 100 mm x-travel: 1250 mm y-travel: 1120 mm z-axis: 1250 mm table-size: 1250 x 1250 mm taper: ISO 50 PDB total power requirement: 11 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 3050 mm turning diameter over slide rest: 2500 mm turning length: 21200 mm Control: Siemens type: 840D turning speeds: 0,236-60 U/min faceplate: 3000 mm main drive motor: 200 kW tailstock quill diameter: 900 mm roll stand: steady: 1200 mm steady: 1200 mm steady: 750 mm steady: 750 mm with live steady: 2000 mm faceplate: 2000 mm Thickness: 330 mm workpiece weight: 200 t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
X - axis 600 mm Y - axis 450 mm Z - axis: 450 mm B - Axis - 120 / + 45 ° C - Axis 360 ° Spindle speed range 20,000 rpm Spindle drive 18 KW Torque 91 Nm Tool holder 63 SK Pallet size 350 x 350 mm Large pallet load 150 kg Number of tool locations in the magazine 60 Large tool diameter 80 (125) mm large tool length 200 mm Gross tool weight 6 kg Tool change time approx. 3 sec. Feed range m/min Express feed m/min Rapid traverse B - axis 50 rpm Rapid traverse C - axis 140 rpm Machine weight 8100 kg Machine dimensions 6.6 x 4.0 x 2.8 m CNC HEIDENHAIN iTNC 530 Electr. Handwheel Probe BLUM Laser Direct displacement measuring systems 60-speed tool changer NC - Swivel rotary table (Torque) 7-fold pallet changer Spindle coolers SIGMATEC 15 / 900 cbm/h Oil Mist Extraction Internal coolant device 18 - 70 bar Conveyor
centre height: 125 mm spindle bore: 27 mm taper in dividing head spindle: MK 4 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Horizontal dividing head WALTER mounted on a SINUS-table WELK. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 32 mm arm length: 410 - 1000 mm workpiece height max.: 765 mm coolant: ja boring spindle diameter: 38 mm diameter of quill: 70 mm spindle stroke: 225 mm boring spindle: MK 4 mm/min spindle turning speed - stepless: 70 - 2000 U/min feed range - spindle: 0,04 - 0,32 mm/U column diameter: 225 mm bore radius max./min: max. 1130 mm table surface area: 630 x 1320 mm height adjustment: 500 mm base plate: 1500 x 1000 mm T-slots: 4 Stück T-slot - distance: 18 mm total power requirement: 2,2 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: m shift of supports: 590 mm without turntable and tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Number of tools: 36 St. dimensions: 0,72 x 0,56x 0,95 m weight: 27 kg New movable tool trolley for toolholders with 40 taper or optional for VDI 40 toolholders. Each row is easily removable. The trolley will be packed for transport and be delivered without any toolholders. Variations in color are possible. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
conus taper: 0 mm with milling disc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The shopping trolleys of the DRC series are still easy to handle even under heavy loads. Due to the close-meshed processing of the basket, no small parts fall on the floor The base, with a stable base grate, is designed for one to two beverage crates, depending on the model. The DRC series from Wanzl is very popular not only in supermarkets but also in beverage stores, DIY stores, garden centres and electronics stores. Specifications: Manufacturer: Wanzl Type: D155RC Condition: used Basket volume: 143 litres Dimensions (H x W x D): 104 x 60 x 103 cm Car seat lower box rack, 50 kg load capacity Standard rolls, 12.5 cm diameter Space required per trolley: 23.5 cm Space required per 10 cars: 360.0 cm Space required per 50 trolleys: 1260.0 cm Capacity parking boxes 3-row, length 5 m: 51 Used goods are free of any advertising (promo box, advertising media, handles), cle ...
Technical data of the pallet rack crossbar: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: RAL 5010 Gentian Blue Truss Type: TRV1-290-124-30 CE Box file: 120 x 40 mm Agraffe: 5 HK (hooks) Clear width: 2,900 mm Max. load per pair of trusses 3,100 kg, with the same weight. Distributed load 02x Safety pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.
Number of tools: 30 St. dimensions: 0,72 x 0,56x 0,95 m weight: 27 kg New movable tool trolley for toolholders with 50 taper. Each row is easily removable. The trolley will be packed for transport and be delivered without any toolholders. Variations in color are possible. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
change gear bolt The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
We offer a WiHA convection refrigerated display case XXL format as a 230V version of the standing module. Description: Snack counter Convection refrigerated display case with recessed cooling tray for cooling. Open on the customer side with air curtain and anti-cough protection, angular glass structure made of insulating glass. The snack counter has 6 glass shelves that are individually illuminated and adjustable in height. The recessed cooling surface is ideal for drinks. Commercial equipment for installation in enclosed spaces (canteens, break rooms, petrol stations, kiosks, school rooms, trade fair presentations. Here you can offer your products in an optimal way to promote sales. (salads, delicatessen, snacks, dairy products, sandwiches and much more) The RRP € 14,000 net: You will receive an invoice with VAT. Condition: Used Metrics: Snack counter floor-stand ...
optical angel measuring unit. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tool clamping area: SK50 mm weight: 1 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Year of manufacture 2019, top condition, only approx. 300 hours Machine housing: solid stainless closed base plate Screw housing : stainless Working auger : stainless Feeder auger: stainless, horizontally extendable Lock nut: stainless Cutting device : included incl. cutting set for fresh meat and insertion rings Perforated disc diameter: 130 mm with main switch / 2 speed / push button Motor power: 12.5/15 KW / Voltage: 400V / 50Hz incl. the following additional equipment : +Safety cover for cutting set - +Separator device incl. SEP cutting set and Sep support cross with adjustment and discharge tube +Z-agitator: 1.5 KW (can only be used for FF), enlarged Hopper capacity approx. 355 I incl. machine elevation and safety step mech. Ejector (of the working screw) by means of lever on machine, microprocessor-controlled (PLC) Membrane keypad and control cabinet stainless st ...
centre distance: 5000 mm turning diameter over bed: 4000 mm turning dia. in gap: 5000 mm spindle bore: 104 mm turning speeds: 1,4 - 71 (18x) U/min total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m 4-jaw face plate Ø 3.150 mm modular lathe! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 30 , 13 , 1235
Compresseur WORTHINGTON CREYSSENSAC type Rollair 40 Compresseur à entrainement direct en bon état Puissance moteur : 30 KW Puisance : 40 à 150 ch Pression : de 7,5 à 13 bars Débit : de 265 à 1235 M3/H Année : 2003
Key data: 30 , 13 , 206
Compresseur WORTHINGTON CREYSSENSAC type Rollair 4000 Compresseur à entrainement direct en bon état
diameter: 255 mm numer of jaw: 3 Stück bore: 82 mm Total height: 130 mm weight: 25 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diameter: 260 mm tool adaptor: 40 SK : S 20 x 2 für DECKEL Slide cross: 48 mm Weight: 5 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
1 complete ready-to-use WEHO hot air heater operated with heating oil, immediately available from the site for self-dismantling
spindle diameter: 160 mm x-travel: 10.000 mm y-travel: 3.000 mm Control: total power requirement: 120/63 spindel kW weight of the machine ca.: 63 t dimensions of the machine ca.: 15x3.85x7.36 m Stocknumber 1210057 Type of machine CNC Floortype boring machine Make WOTAN Type Rapid 5C Build in 2004 Type of control HEIDENHAIN iTNC 530 Spindle diameter 160 mm X-stroke (mm) 10.000 Y-stroke (mm) 3.800 Z-stroke (mm) 700 W-stroke 700 mm Tool Taper Iso 50 Speeds (Rpm) 1,25 - 1250 Feeds (mm/R) 1 - 5000 mm/min Rapid feeds 5 mtr/min. Total Power (KW) 120 /spindel 83 Lenght (mm) 14.500 Width (mm) 3.850 Height (mm) 7.360 Weight 62.300 kg Additional information completely overhould in 2004 and retrofitted by Dorries Scharmann with CNC control HEIDENHAIN iTNC 530 - 4 different angular milling heads - hydrostatic spindle bearing - aerostatic guideways - coolant device - chip conveyo ...
spindle diameter: 100 mm x-travel: 1200 mm y-travel: 800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 5,6x3,4x3,x7 m Brand: Femco Type: WBT-100SR2 CNC brand: Mitsubishi CNC model: Meldas C3 Year of make: 1995-05 Facing support Table length: 1.440 mm Table width: 1.600 mm Spindle diameter: 100 mm ø Machine dimensions (lxwxh): 5.680 x 3.400 x 3.700 mm incl. right-angle milling head type Huron The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Please find herewith list of spares of Wartsila 32LN available for sale. Some photographs are attached for your ready reference. If you are interested in anyone, please inform us enable us to quote you in detail. 1) CYLINDER HEAD 2) PISTON 3) EXHAUST VALVES 4) INLET VALVE 5) WATER PUMP 6) INJECTION PUMP 7) HOUSING WITH BEARING and more Small Spares available
Gebr. Wabäma Circumat Elektronik 380.260, with circular knife, 1.5 kW, machine no. 04020665
Water pump, make Wilo, type: IL-E80/8-40-BF-R1, dry rotor pump with frequency converter, approx. 160 m³/h, 8-40 m head, 15 kW, 2915 1/min revolutions, nominal pressure 16 bar, YOC 2007
Lifter Papa Withforce WE 3616 Lifting height 2500 mm Load capacity 1600 kg Load center 800 mm with charger Battery needs to be replaced L x W x H: 2.0 x 1.5 x 2.5 m Year of construction 1992 Weight approx. 1000 kg The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Used lathe from Wagner Wagner WDE 500 Lathe, cycle-controlled Only approx. 1700 operating hours Turning diameter 500 mm Turning length 1500 mm Control Siemens 802 C Circumferential diameter over bed carriage 280 mm Spindle bore diameter 82 mm Number of Controlled Axes 2 Speed range 20- 3000 rpm Rapid traverse speed 5 m/min Number of receptacles in the turret 1 Multifix "C" Tailstock Yes MK 5 Drive power 7.5 kW Machine weight approx. 3.0 t Dimensions L x W x H 3.3 x 1.7 x 1.7 m Cycle-controlled CNC lathe in good condition. Accessories: - Coolant device - Basic holder - 3- Jaw chuck - various PARAT tool holders
Used batch fluid bed dryer made by GLATT, model: WSG-C 60 made of stainless steel with spray granulation. 1100 kg/day capacity 40 kW power installed Max. air capacity 6000 m3/h Max. Static pressure 12000 Pa New 1995. The device equipped with: - air filter - fan - control cabinet - piping - tun removable - full documentation - CE. EX.
Wampfler GS 21-05/1812/04ML/LT Slip Ring Assembly GS 21 Technical details: • Manufacturer: Wampfler • Type: GS 21-05/1812/04ML/LT • Year of construction: 2003 • Degree of protection: IP54 • Version: 4 × 250 A + PE (660 V), 12 × 25 A (690 V), 4 × 20 mA (10 V) Description & Use: Slip ring assemblies for the safe transmission of energy and signals in rotating applications, including in: •Cranes • Lifting and conveying technology •Wind turbines •Mechanical engineering Condition: Used (see pictures). Hint: For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. More items - new and used - can be found in our shop! International shipping costs on request!
DEFUM WFM-100 boring machine was built in 1984 in Poland by the Dąbrowska Fabryka Obrabiarek DEFUM. The machine is designed for precision machining of workpieces with complex geometry and high weight. All machining processes, i.e. drilling, milling, boring and thread cutting, are performed on a stable work table by means of a powerful spindle with a diameter of 100 mm. The WFM 100 horizontal boring machine weighs 11000 kg. Technical specifications of the DEFUM WFM-100 drilling and milling machine - feed in the X/Y/Z axis: 1200/1000/600 mm - work table dimensions (L x W): 1100 x 1100 mm - maximum workpiece weight: 3000 kg - maximum spindle rotational speed: 1600 rpm - spindle diameter: 100 mm - spindle drive power: 18.5 kW - dimensions (L x W x H): 4610 x 3620 x 3110 mm - weight of the DEFUM machine: 11000 kg
Clampbooster CB-10 autom. Clamp Workpiece Clamping for Vise Clamping Robot Year of construction 2023 composed of: - Drive unit inkl. ISO 9409-1-50-4-M6 bracket for cobots - Control Box - Central unit with touch screen - Connection kit - Docking Plate Long Automation 67160 / 67205146160 - Spin-Socket 40012 1/2 inch 6-pt., 12mm The Clampbooster is an innovative end-of-arm tool (EOAT) designed to automatically control manual vises in robotic applications, increasing the level of automation in CNC manufacturing processes. Functionality & Purpose The Clampbooster extends a robot cell with the ability to autonomously perform clamping and loosening operations in a manual vise without the need for the vise itself to be pneumatically or hydraulically equipped. It serves as a mechanical "intermediate motor" between the robot and the vice: the robot positions the component, t ...
Weibert RAV 32 Feeder 3 rolls 4 Speeds large. Projection 700mm 188W 400V Roll diameter: 80mm Roll width 28mm G&RO-14_9930
Designed for washing smoking sticks for hanging meat and sausages with length to 1000 mm. Machine dimensions(LxBxH): 1400 x 900 x 1460 mm Water connection: ¾ ”; 4-6bar, 50...60°C; Electrical connection: 400 V/ 50 Hz Installed power, kW 1,65 Capacity pcs./h 600
maximum number of results exceeded
please refine your search
