skoda w used for sale

; Power [PS]: 96; Gross weight [kg]: 944; Engine: Perkins 1104A-44TG2; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 180

Max. useful capacity [dm3] 170 Max. batch weight [kg] 500 Blast room inside dimensions [mm] : Ø700 x 988 Max. workpiece diagonal [mm] : 350 Max. weight per workpiece [kg] : 23 Number of blast wheels : 1 Power per blast wheel [kW] : 11 Abrasive throughput, max. [kg/min] : 180 Initial abrasive filling [kg] : 180 Air required for dust collection [m3/h] : 1 600 Installed power, approx. [kW] : 12,3 Dimensions, approx. [mm] A : 3 730 x B: 2 070 x C : 1 610 Weight, approx. [kg] : 2 300 Max. carrying capacity of loader [kg] : 500 Power of loader [kW] : 7,5 Weight of loader [kg] : 1 250

Key data: 8000 KW, 7425 kVA, 11000 V

CHARACTERISTICS OF GENSET ✓ Wärtsila 16V32SG | YOM 2015 | Real power of the motor is 8.000 kW (in plate) | Effective design power was reduced to 7.400 kW in order to get adapted to legal power stated at permits (there was a gas turbine in this plant before installing this Wärtsilä genset) | Fuel: Natural gas ✓ Generator ABB 7,425 kVA | 11,000 V | 50 Hz | Cos = 0.98 AVAILABLE EQUIPMENT ✓ Genset with auxiliaries included control panel and synchronizer ✓ Generators high voltage switchgear 11 kV, protections cabinet ✓ Lub oil system, gas valves, crane, radiators HT circuit, cooling towers LT circuit, heat exchangers, control valves, water and oil pipes, exhaust silencer. ✓ Main step-up transformer SIEMENS 8000 kVA | 11 / 15 kV | YOM 2015 ✓ Auxiliaries transformer EFACEC 400 kVA | 0.4 / 15 kV | YOM 2009 ✓ Heat recovery boiler for steam generation | Y ...

2 pcs used REINTJES gearbox type WAV 1400 once left/left and one-off left/right Undertone 2,040/1

Control board for Werner & Pfleiderer Rototherm Stikkenofen Type: RZK 128

Batch container 1.500L, heatable, incl. anchor agitator

CHP combined heat and power plant with 2 x 910kVA generator from a biogas plant with gas engine Waukesha Model: P48GLD 1 generator installed in the container 1 generator disassembled as a spare donor (or reconstruction) Manufacturer: Zantingh Groep Holland Type: Tantec 630 HR Motor 1-2 Ser.Nr: 975100 Y.O.M.: 1997 Total weight engine 1: 17000 kg Generator Manufacturer: Stamford Type: HC.1624M2 No./Y.: C077726-02/1997 AVR - Mx321 Power: 910 kVA, 1500 rpm 400 V; 1313.5 A; 50 Hz; IP22 Diesel/gas engine Manufacturer: Waukesha Model: P48GLD No./Y.: 80464-01/1997 Fuel: Nat.-GAS / Biogas Power: 726 kW; 1500 rpm other components - Control/switch cabinet of nib-elektrotechniek with Zantingh Master-Control - Grundfos pumps - Plate heat exchanger - Silencer - various wiring and piping - Housing container with ventilation Container Dimensions Wide approx. 3.70 ...

Thank you for your interest in our used machines, which we are pleased to offer you as follows: Manufacturer: W&P - Werner & Pfleiderer Model: LUK 075 Double Z Laboratory Mixer - double-walled heatable electr. Values: 380 V 50 Hz Agitator speed: 56/37.5 Total capacity: 1.1 liters Net capacity: 0.75 litres Motor power: 0.37 kW Machine dimensions: approx. 670 x 350 x 330 mm Weight: approx. 65 kg Details: parts made of stainless steel that come into contact with the product double-walled heating Comes from laboratory operations at a research institution We offer this machine for sale "in existing condition" under exclusion of any warranty/defect claims or representations.

Double pipe heat exchanger pipe heat transfer for biogas plant, sewage treatment plant sludge hygienization - used - Manufacturer AEL GmbH Leisnig Type Double pipe heat transfer W202 Fabr. No. 7.0637.940/29-56 Built in 1997 Permissible betieb pressure 6 bar Permissible operating temperature 90°C Content 1090 l Kerb weight 6510 kg Length approx. 11 m Width approx. 3 m Depth approx. 1.5 m

Technical data of the pallet rack crossbar: Shelving system: Dexion Type: P 90 The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: sendzimir galvanised Box profile: 89 x 50 mm Truss Type: SLO89|2 Agraffe: 5 HK Clear width: 2,800 mm 02x Locking pin, used Design: sendzimir galvanized For securing the longitudinal members Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Automatic multi-platform saw with leaf adjustment and part back conveyor Neumann Type: MRF 16/4.000: Technical data: Follow later!

Automatic optimization crosscut saw: Technical data: Follow later!

Stock# UG6311 Second hand line for production caramel candies, mono flavour. Line can produce fruit taste candies, mint candies or milk (fat based). Reporting output up to 468 kg/h. Line consist of: - Caramel mass preparation section - includes caramel cooker TC&C Process designers 24" Schlagenkocher, manufactured by Snelders, new 1997. Working output up to 1000 kg/h. - Winkler & Dunnebier forming line type 163.04, new 1997. Reported output up to 486 kg/h. Forming section has dimensions: 920 mm x 280 mm x 40 mm. Forming dies in motion - 118 pcs. Number of candies per one mold: 240 pcs. Machine works with speed up to 6.5 molds per minute. Working dimensions: L 11.85 m x W 1.9 m x H 2.83 m. Final product discharged at height 850-950 mm. Power consumption 40 kW

Fronius magicwave 2600, with wire feeder can be used for the robot welding. Machine is in great working condition, equipped with longines controls, wire feeder and welding gun connections for the robots.

Weipert start hole drilling machine Flexibility and economic Producing micro-bores TECHNICAL DATA: Electrodes: 0.50-3mm Travel X-axis: 250mm Travel Y-axis: 350mm Travel Z-axis (Z1& Z2) 600mm Travel W-axis 300mm Feed X,Y,Z-axis 200mm/min Spindle speed 20-120rpm Aspect ratio 300:1 Table dimensions 436x316mm max. working current 30 A Table electrode 360mm Dielectrium container 25L Power 3.5kW Weight 600 Kg

Mikron WF31D Precision Milling and Drilling Machine Machine with chips and splash guard cabin Equipped with a Heidenhain TNC355 controller Technical Specification The WF 31 D is a precision milling and drilling machine for series production and CNC training. Driven by an automatically shifting step gearbox and Poly-V belts. Vertical spindle can be extended by 90 mm; Conversion from vertical to horizontal machining possible. Ball screws with DC drives allow simultaneous feed movements. Guides are protected against dust, chips and coolant. Specifications Manufacturer: Mikron Type WF31D Control: Heidenhain TNC 355 Longitudinal movement (X): 560 mm Transverse movement (Y): 500 mm Perpendicular movement (Z): 400 mm. Drive power: 3.3/4.0 kW Speed range: 40-4000 rpm Feed speed: 2-3000 mm/min Rapid traverse speed X/Y: 6000 mm/min, Z: 5000 mm/min. Electrical equip ...

MARINE GEARBOX Reference number 20129 Brand Gearbox REINTJES Model Gearbox WAF 560 Ratio 5,05:1 Power 720 RPM 1800 Serial number 54445 General condition TAKEN OUT RUNNING Status AVAILABLE SPECIFIC INFORMATION Sae housing 30 Flexible coupling YES Controls MECHANICAL SPECIFIC FEATURES Brackets YES Oil cooler YES Pto NO Weight (kg) 1280 KG

Dough kneading machine W&P DK 250 with 2 boilers -Double cone kneader type DK 250 -for max. 400 kg dough or 250 kg flour -with base plate

clamping width: 200x75 mm : , max. clamping width: 200x120 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Material : Stainless steel Mixed roe with double sheath, heatable / coolable Mixing tool : Z-arms Total volume: 3.75 l. Usable volume: 2.5 ltr. Main drive: 0.81 KW, 1400 / 43 rpm Bucket speeds: rear shovel: 25 rpm front shovel: 43 rpm permissible vapour pressure: 5.88 bar;

Machine Type: CNC Plate Boring Machine Make WOTAN Type Rapid 5C Year of manufacture 2004 Control type HEIDENHAIN iTNC 530 Spindle diameter 160 mm X-off (mm) 10,000 Y-off (mm) 3,800 Z-off (mm) 700 W-way 700 mm Tool holder Iso 50 Speeds from (rpm) 1.25 - 1250 Feed rate (mm/rev) 1 - 5000 mm/min Rapid traverse 5 mtr/min. Total power(KW) 120 /spindle 83 Length (mm) 14.500 Width (mm) 3,850 Height (mm) 7,360 Weight 62,300 kg Information - 2004 completely overhauled and converted to CNC by Dorries Scharmann Control HEIDENHAIN iTNC 530 - 5 different angle milling heads - Hydrostatic spindle bearing - Aerostatic guideways - Coolant device -Conveyor -Oil cooler

Wabäma WSG CLASSIC 460/11 Bread cutting machine / Bread gate 10mm Y.O.M. 1999 Condition: Used as available Manufacturer Wabäma GmbH Model: WSG Classic 460.11 230 V / 3.4 A /0.75 kW Weight: approx. 175 kg Dimensions: approx. 62 x 68 x 128 cm Visit possible at any time on site.

TECHNICAL DATA: Working width mm: 230 Planing height mm: 120 Infeed table length mm: 3500 Number of spindles: 6 Spindle configuration: 1 B: 5,5 KW 2 R: 7,5 KW 3 L: 7,5 KW 4 T: 7,5 KW 5 B: 5,5 KW 6 T: 5,5 KW Spindle diameter mm: 40 Feedrate m/min: 6-36 Rotation speed max rpm: 6.000 Soundproofing cabin: Yes Feeding magazine Weinig - PHV - 2004

Following Separator available for sale. Make:ALFA LAVAL Type:WHPX 405 TGD 24-60 Serial Number:4020415 RPM:1700-1800 r/m ,142-150 Product No.:881071-01-01 Machine Topper No.:544230-01 Bowl No.:544225-01 Machine Bottom part:540224-02 MOTOR Make:Made in Italy LS 132S 38440 VOLT:440 HZ:60 KW:7.5 RPM:1730

Following separator available for sale. Make: ALFA LAVAL Type: WHPX 510 TGD-24-60 Manufacturing Number: 4015516 RPM: 1700-1800 r/m,142-150 Product Number: 881035-03-04 Machine Topper No.: 544117-02 Bowl No.: 544118-03 Machine Bottom Part: 540225-10

MW MEAN WELL T-60C

Wiedenmann foliage loading blower KLB 645, Honda 4-stroke gasoline engine GX 240, 6.0 kw/8 hp, turbine approx. 380 mm, with suspension for side wall. Incl. telescopic gallows and approx. 3 m suction hose with suction nozzle and handle as well as settling frame with lift. Ready-to-use good condition.

Push-mast forklift, high-bay forklift used Manufacturer: STEINBOCK BOSS Type: WA15R-19130 MK II A-1 Built: 1999 Operating hours read: 10747 Callable capacity max 1000 kg Lifting height: 8750 mm Weight without battery: 6550 kg Battarie 80V 4 PzS 620 kW13/2019 Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

1. Qty. 1 Second-hand steamer generator – boiler 1 Mfc.: VKW Type: Three-pass boiler Built: 1965 Steam capacity: 8 t/h 2. Qty. 1 Second-hand steamer generator – boiler 3 Mfc.: VKW Type: Unduced-draught boiler Built: 1959 Steam capacity: 20 t/h 3. Qty. 1 Second-hand steamer generator – boiler 4 Mfc.: Wehrle Type: Unduced-draught boiler Built: 1974 Steam capacity: 45 t/h 4. Qty. 1 Second-hand turbine Mfc.: Hamburger Turbinenfabrik Generator power: 3 MW Pressure: 59 bar 5. Qty. 5 Second-hand drying cylinders Built: 1959/1960 Dia.: 1500 mm Length: 2850 mm