skoda w used for sale

NEW injection pump 0402066725(= PES6P110A120RS3336-1) Contact= MIW GmbH Motoren-Instandsetzungs-Werk Nord-West-Ring 8 D-27404 Zeven/Germany phone: 0049(0)4281-950583 fax : 0049(0)4281-950585 info@miw-zeven.de abc.miw-zeven

New injection pump 0402 066 725(=PES6P110A120RS3336-1) NET 2.950,-EURO 6 x new injectors 0432 191 342 (Cummins # 408931500) net / piece 215,-EURO Mail: info@miw-zeven

Injectors new 6 x 0432 191 342/408931500 NET / piece 215,-EURO Injection pump new 0402 066 725/PES6P110A120RS3336-1 NET 2.950,-EURO mail:info@miw-zeven

The list of equipment for sale from molding line: 1. Moulding Machine HSP-2D (22kW, 70f / h) 2. Lifting table 3. Pressure plate 4. The dispensing sand tank

Qty. 2 Second-hand pickling lines Mfc.: Sundwig Built: 1968 Tank of clean HCl: 50 m³ Tank for dirty HCl: 50 m³ Strip width: 1525 mm Qty. 3 Tanks interconnected one for each bath 310 m³ Qty. 3 Baths HCl 152.5 m Double bath pre-washing water Bath for final water washing Heater Chimney for taking out the acid vapors Acid pumps Auxiliary pumps Leveling machine Mfc.: AEG-EMG Built: Oiling machine Mfc.: Sundwig Built: Coiler Mfc.: Sundwig Built:

Qty. 1 Second-hand 3 stands 4-Hi Tandem cold rolling mill line Mfc.: Demag Type: 4-Hi Built: 1968 Material to be rolled: low carbon steel Strip width: 600 †1500 mm Thickness Entry: 2.5 mm Exit: 0.2 mm Entry: Coil ID: 510 mm OD: 1800 mm Weight: 15 MT Exit: Coil ID: 510 mm OD: 1800 mm Weight: 15 MT Work roll: dia. 380 mm x 1650 mm Roller bearings Back-up rolls: dia. 1150 mm x 1650 mm Oil film bearings Housing: Closed top, cast steel construction Housing post: 762 x 552 mm Rolling speed: 240 m/min.

RECON Part number: 303120B ---------------------------------------------------------------------- ---------- Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ---------- If you have any further questions do not hesitate to contact us

Centrifugal deposition Hydro Zyclone Liquid Particle Separator Hydro Cyclean HC5/HCH5 used Hydrocyclone Gravity-Water-Particle Separator Cyclone Water filter Water cleaner Watercleaner For separating heavier, larger particles in liquids or sludges. Was used to separate particles from washed-up pappier & cardboard solids. Price per pc3 3 x available Manufacturer: SULZER-ESCHER WYSS GmbH Type: HC5-TB5B.40 Y.O.M.: 1993 Main pipes dN400 1x Masch.Nr: 11835 (EQ.Nr 11GE01/1st stage) 1x Masch.Nr: 11837 (EQ.Nr 11GE01/1st stage) 1x Masch.Nr: 11836 (EQ.Nr 11GE01/1st stage) 1x available Manufacturer: SULZER-ESCHER WYSS GmbH Type: HC5-TB6B.48 Y.O.M.: 1993 Main pipes dN400 1x Masch.Nr: 11835 (EQ.Nr 11GE02/2nd stage) Cyclone & Distribution Material: Plastic Frame & Pipe Material: Stainless Steel Size Total approx.: 6200 x 1100 x 2800 mm Weight each approx.: 2.5 to T ...

Type : T900 Spindle-30 mm spindle rotation speeds- 2500 / 5000 /8000U /Min/rpm Spindle tilt- 5° to +45° spindle trave-140 mm max. clamping height-125 mm max. tool diameter-230 mm Table dimensions-1020x700 mm table height-900 mm dust collector plug-60/120 mm engine power-3 kW 400V weight net/gross-280 kg packaging dimensions-1150x1155x730mm

WAUKESHA UNIVERSAL II (U2) model: 030-UII , capacity 8.2 m3/h output pressure 17.2 bar Waukesha Cherry-Burrell Universal 2 Series hygienic pumps with rotating pistons are characterized by reliability, gentle unpulsive pumping of products with a wide range of viscosities. The special rotor profile and fixed cross-section of the working chamber ensure no pulsation, no turbulence and gentle pressing of the product without destroying the structure or desired solids. Unlike cam pumps, the Waukesha pump with rotating pistons has only rotor tolerances to the stationary body and pump cover. They used a special non-rubbing material of rotors, thanks to which it was possible to significantly reduce internal tolerances. In addition, the seal line is extended compared to ordinary pumps. As a result, reverse leakage is minimized even with low viscosity fluids and the pump runs smoothly  ...

K+G Wetter Cutmix 70 STL bowl cutter, 70 liters bowl chopper, all stainless steel, membrane keyboard, variable knife speed up to 5.000 rounds per minute, mixing speeds forwards and reverse, knife shaft brake electrically operated ,knife head with 6 knives, bowl with highest filling level, noise reduction cover. You are very welcome to test the machine in Koblenz, Germany.

K+G Wetter D 114 Typ 409 mixer automatic grinder, 114 mm hole plate diameter, almost completely made of solid stainless steel, mixing unit with mixing-worm and paddle-mixing-shaftmain switch and electric control integrated in machine housing. YOu are very welcome to test the machine in Koblenz, Germany.

Gas filling device / scale with rolling landing Manufacturer: Ninnelt International GmbH Type: CTE 110 In good condition!

Weibert form7-75 Edge sanding machine infinite angle adjustment (0 ° 90 °) vertical and horizontal loop with oscillating abrasive belt (good stock removal) spring loaded clamping device for belt Diameter of the grinding roller rubberized 80 mm Belt: 2260 x 150mm Contact surface (graphite Edition) 170 x 820 mm Table height adjustment 80 mm Suction nozzle D = 100mm Engine power 2,2 KW 400V 50 Hz G & pieces 5900750

Weibert form 7-85 Edge sanding machine Infinite angle adjustment (0 ° to 90 °) Vertical and horizontal loop with oscillating abrasive belt (good stock removal) Table height adjustment by Handwheel Spring loaded clamping device for belt Grinding roller diameter 80 mm Belt: 2510 x 150mm Contact surface (graphite Edition) 180 x 950 mm Table height adjustment 80 mm Suction nozzle D = 100mm Engine power 2,2 KW 400V 50 Hz G & pieces 5900850

Beer tank, single-walled, isolated with fittings Manufacturer: Wilhelm Schmidding Type: transport container Year of construction: 1977 Capacity: 22,500 litres Pressure: 3 bar Material: 1.4541 Temperature: 20 ° C Dimensions: Diameter: 1,750 mm Length: 9,850 mm Container has been cleaned already. In very good condition!

Weibert SA 205 Extraction system N E U machine extraction system SA 205 400V 2.2 KW (3 HP) Flow max. 2900 m³/h 2 dust nozzle 120 mm 1.7 m² filter area 1 chip bag 300 litres Fahrbahr Weight 70 kg G & WJ-SA-205

MADE directly from the manufacturer with PREMIUM quality stock items Description: -Conveyor belt / conveyor belt made of rubber for many applications in industry, agriculture and construction industry - new, coated on both sides, open, 2-ply reinforced bottom cover made of PVC, with mounted metal connectors made of stainless steel to the endless connect -Dimensions: 9.152 mm x width 600 mm x thickness length approx. 6.5 mm, surface with tunnels. -With 15 piece rubber studs, 50 mm high, 600 mm long, distance approx. 610 mm,. On request we can cut the belt conveyors / conveyor belts to your individual measurements. (All lengths and widths possible) Additional versions, with pimples, Stollen or structured surfaces available. Statable VAT! Not is your desired size? No problem! We customize for you! More conveyor belts, drive belt and flat belt in all other sizes available immediately ...

FRICTION BELT DIRECT FROM THE MANUFACTURER! Description: -Chrome leather friction belt for screw press, riveted, new! -Dimensions: 530 mm i.diameter x 50 mm high x 18 mm thick ON request make we the friction belts regarding to your sizes! For all machine types like SMS Hasenclever Berrenberg, Schuler, Weingarten, Vaccari, via, Mecolpress, Osterwalder... We deliver worldwide!

MKS 315 N Metal cutting circular saws Motor: 1.5/2.2 of kW 50 Hz 400V Speeds: 40/80 1/min Span Vice: 120 mm Saw blade diameter: 315 mm Infeed height incl. pedestal: 1015 mm Dimensions: 1000 x 1150 x 1475 mm Weight: 165 kg G & pieces 3620303SET

Dimensions (L, W, H): 2, 60m x 1.05 m x 2, 00 m Which parts can be printed: soft drink / glass closure / 400 parts per minute Accessories:-42 roller 100 x 100, different motifs -2 printing units with 1 pressure tool (paint bucket, 4 color tubes, 1 colour Cup holder with paint tins) -2 knife holder -approx. 10 doctor blades 0, 5 mm / 5 squeegee blade 1 mm / 2 m Blade Knife roll 0, 2 mm -1 intermediate drying -2 light barrier -various sensors

Make: WOLF Type:Climate aggregate Power: 75 kW Refrigerant R407C Volume: for a ventilation system of 12,000 m2/h Built: 1999 2 pcs. compressors Make: Maneurop Complete unit including condenser, collector and switch box. Distributed in two circles of 50/50% each Price 3800,- More information can be found on our abc.frigocom.at page or via e-mail on info@frigocom.at

Wieland Suction Cup IS-30 T - Weight: 100 kg - rpm: 2895 - 3 kW - Space requirement: 600 x 1200 x 1200 mm Wieland Suction Cup IS-35 T - Weight: 90kg - RPM: 2895 Good condition fully functional can be visited and tried out on site. Shipping abroad. sightseeing: Basically, I would like to point out to you that in order to avoid misunderstandings, the article can be viewed before purchase and tested under electricity. Please ask questions before purchasing to avoid any ambiguity. If you have any general questions or make an appointment for a visit, I can be reached at any time, using the telephone number below or above. Errors in the description and intermediate sale reserved. The VAT is shown separately on my invoices. Shipping with forwarding.

K+G Wetter D 114 Typ 409 mixer automatic grinder, 114 mm hole plate diameter, almost completely made of solid stainless steel, mixing unit with mixing-worm and paddle-mixing-shaftmain switch and electric control integrated in machine housing, performance max. approx. 2,400 kg/h, hopper capacity approx. 110 liters, electrically interlocked safety grid for hopper. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.