skoda w used for sale

DIGI-Flow water meter, 45 units in stock. Available for immediate delivery!, , -Housed in a protective steel casing, -Minimum flow rate: 4 m³/h, -Built-in batteries, 5-year battery life, -Liquid temperature up to 50°C, -Connection fittings: Female and Male Cardan - Type C - Perrot, , Digi-Flow 100 with a 100 mm free passage. The digital display shows the current water flow rate and tracks the total volume of water pumped. This makes it possible to quickly and easily get an overview of the pump’s water flow at any time. Ultrasonic waves are used to measure the water flow with high accuracy and reliability. The major advantage of this principle is that the medium does not come into contact with the measuring sensors. The system is completely obstruction-free. Pressure loss is negligible, so the pump loses virtually no power. The housing is made of galvanized sheet metal for a long serv ...

New and unused Caffini Libellula 1-3 LB80 self-priming diaphragm pump. These slop pumps have been used since 1968. This successful pump type, also called cats head in practice, has remained virtually unchanged since that time. The pumps are suitable as a slurry pump or for small dewatering. This caffini libellula diaphragm pump is equipped with a Hatz diesel engine mounted in a mobile frame. Can be supplied with any desired coupling/connection. Max: 20 m³ per hour Max: 15 mWK 4 pcs. in stock If you have any questions, you can of course always contact us., , Throughput capacity: 20 m3/h, Max dirt passage: 50 mm, Motor brand: Hatz, Max. head: 15 MWK, Weight: 150 kg, , = More information =, , Year of manufacture: 2025, Colour: Blue, Applicable material: Water, Empty weight: 150 kg, Cargo space capacity: 335 l, Technical condition: very good, Visual appearance: very good, Price: On reques ...

VTT Sand Trap, VTT sand traps optimize your pumping system during well dewatering projects. They capture and separate sand carried along with the groundwater, while simultaneously acting as an air vent for accurate water measurements., , Applications:, , Well dewatering, Horizontal drainage, Construction pit dewatering, Water measurements, pH-neutral water 0 - 45 °C, , Water meter option, The VTT sand trap is prepared as standard for the installation of a 4-inch Handy water meter. This integrated preparation ensures simple and reliable water measurement within your dewatering system., , Max dirt passage: 100 mm, , = More information =, , Year of manufacture: 2026, Technical condition: good, Visual appearance: good, Price: On request, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer informa ...

Wehde WM 50 KS – 400 V, , The Wehde WM 50 combines capacity with whisper-quiet operation., , Ideal for sewage, drainage, well dewatering, or construction water., Equipped with a rotor 400V electric motor., , The Wehde WM 50 DN diaphragm pump offers a high flow rate, even with a high solids content in the medium being pumped. It can easily pump solids up to 25 mm in diameter. This makes it ideal for pumping water, brackish water, sludge, oil, viscous liquids, and water-air mixtures., , Technical specifications:, , Type: Double diaphragm pump, Motor: Rotor 3 kW, Multiple units in stock., , Call or email us for an interesting offer., , Throughput capacity: 40 m3/h, Max dirt passage: 100 mm, Max. head: 16 MWK, Max dirt passage: 1500 rpm, Weight: 300 kg, , = More information =, , General information, Year of manufacture: 2010, Applicable material: Water, , Weights, Empty weight: 300 kg, , F ...

Selwood PD75, Self-priming - Quick coupling. MAX capacity: 30m³/h. MAX head: 30mwk. MAX sludge clearance: 6mm. Widely used in construction for smaller jobs. Can also be connected to a drain. A well-functioning, immediately usable machine., , Throughput capacity: 30 m3/h, Max dirt passage: 6 mm, Max. head: 15 MWK, Max dirt passage: 3000 rpm, Weight: 115 kg, , = More information =, , Year of manufacture: 2012, Applicable material: Water, Empty weight: 490 kg, Connector size: 4, Technical condition: good, Visual appearance: good, Price: On request, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, ...

The Smipack DV150 is a fully automatic monobloc overlap shrink wrapper with an inline infeed conveyor. It packs products like glass/PET bottles, cans, jars, and boxes at speeds up to 25 packs per minute using a single film reel system. [1, 2, 3, 4], Key Features, Operation Modes: Works with film-only, or with pad/tray configurations depending on exact model variations (like ALX-T or ALX-P)., Infeed System: Multi-row inline infeed with an electromechanical oscillating sorter to align products., Film Handling: Single film reel design with optional printed film centering devices., Shrink Tunnel: Built with an efficient double-chamber shrinking setup. [1, 2, 3, 4, 5, 6], Technical Specifications, Max Output: Up to 25 packs per minute (ppm), Max Product Height: 380 mm, Max Reel Size: 650 x Ø 400 mm, Working Pressure: 6 Bar, Machine Weight: Approx. 1,682 kg, ed linking conveyor into a high-pe ...

MIG-MAG Welding Machine EWM WEGA 400 MIG DW EWM HIGHTEC WELDING GmbH. Made in Germany. Welding current 50- 400 A. Welding voltage MIG 16.5 - 34 V. Max. welding current at: 45%ED (40°C) 400 A. Max. welding current at: 100%ED (40°C) 265 A. DV case WEGA DRIVE 4. With intermediate hose package, Welding hose package with MIG-MAG welding torch, Ground cable and wire reel. Without gas bottle. MIG MAG Welding Machine EWM WEGA 400 MiG DW – Shielded Gas Welding Machine - MIG/MAG Welding Machine

Yamato multihead weigher ADW714 SWH Delivered with In-feed funnel that can be adjusted for many types of products. A much more recent RCU810-A coloured control panel. We’ve upgraded to this system compared to the old RCU600. New stainless steel parts, all dimple plated suitable for a lot of products. This prevents product from sticking. A very high-end machine that is in perfect working condition. Ready for immediate production. Because of 14 large heads this machine is capable of processing large products and fast production. Capable of reaching 90 weighings per minute (depending on set-up and product). Weighing range per portion from 20-3000 gram. Able of doing a multi-dump to go even higher than 3000 gram per portion. Have a look at the video below for a quick impression of the machine. For more specific information contact us. We are very experienced with Yamato multihead weighers.

Eillert flume washer,, More information soon., Have a look at the photos and videos

The Westfalia MSD 60-06-076 milk clarifier is a type of centrifugal clarifier specifically designed for the dairy industry to separate solids, such as bacteria, somatic cells, and other impurities, from milk and cream. This process is essential in ensuring the quality and safety of dairy products., Key Features and Specifications:, - Centrifugal Separation: The clarifier operates using centrifugal force to separate lighter fractions (milk) from heavier fractions (solids)., - Capacity: The MSD 60-06-076 model is designed to process a significant volume of milk per hour, making it suitable for medium to large-scale dairy operations., - Efficiency: Designed to achieve high clarification efficiency, these units help in producing high-quality milk with reduced impurities., - Hygienic Design: Being in the food industry, these clarifiers are constructed with high hygiene standards in mind, usua ...

The Westfalia MSD 60-06-076 milk clarifier is a type of centrifugal clarifier specifically designed for the dairy industry to separate solids, such as bacteria, somatic cells, and other impurities, from milk and cream. This process is essential in ensuring the quality and safety of dairy products., Key Features and Specifications:, - Centrifugal Separation: The clarifier operates using centrifugal force to separate lighter fractions (milk) from heavier fractions (solids)., - Capacity: The MSD 60-06-076 model is designed to process a significant volume of milk per hour, making it suitable for medium to large-scale dairy operations., - Efficiency: Designed to achieve high clarification efficiency, these units help in producing high-quality milk with reduced impurities., - Hygienic Design: Being in the food industry, these clarifiers are constructed with high hygiene standards in mind, usua ...

MIG-MAG Welding Machine Knife Griesheim VARIOMIG 600-2 Welding current up to 600 amps with EWM WEGA Drive4 wire feeder case. Manufacturer: Messer Griesheim / EWM. Made in Germany. Welding current 100- 600 A. Welding voltage MIG 19 - 40 V. Max. welding current at: 60%ED 600 A. Max. welding current at: 100%ED 450 A. With intermediate hose package, Welding hose package with MIG-MAG welding torch, Ground cable and wire reel. Without gas bottle. Without wheels. MIG-MAG Welding Machine Messer Griesheim VARIOMIG 600-2 / EWM WEGA Drive4 – Shielded Gas Welding Machine Welding Current up to 600 Ampere - MIG/MAG Welding Machine – Welding Power Source - MIG MAG Power Source

MIG-MAG Welding Machine EWM Messer Griesheim VARIOMIG 600-2 Welding current up to 600 amps with EWM WEGA Drive4 wire feeder case. Manufacturer: Messer Griesheim / EWM. Made in Germany. Welding current 100- 600 A. Welding voltage MIG 19 - 40 V. Max. welding current at: 60%ED 600 A. Max. welding current at: 100%ED 450 A. With intermediate hose package, Welding hose package with MIG-MAG welding torch, Ground cable and wire reel. Without gas bottle. MIG-MAG Welding Machine Messer Griesheim VARIOMIG 600-2 / EWM WEGA Drive4 – Shielded Gas Welding Machine Welding Current up to 600 Ampere - MIG/MAG Welding Machine – Welding Power Source - MIG MAG Power Source

MIG/MAG/TIG/TIG/Electrode Welding Machine EWM Integral Inverter MIG 500 Pulse Manufacturer: EWM HIGHTEC WELDING GmbH. Made in Germany. Technical data: Welding current 5 - 500 A. Welding voltage MIG 14.7 - 39 V. Welding voltage TIG 10.2V - 30V Welding voltage electrode 20.2V - 40V. Max. welding current at: 60 %ED 500 A. Max. welding current at: 100 %ED 400 A. MIG/MAG pulse – welding, MIG/MAG – standard, (TIG – HF and Liftarc ignition) and rod electrodes - welding possible. 2-stroke welding or 2-stroke welding. Connection option for: handheld remote control, integralC10, C20, C30, C40, superPulsSP10 and SP11, robot interface RINT 1 and 2, vending machine interface, standard. DIN ISO 9000: standard connection of the documentation interface PCINT 1 for welding data documentation for DIN EN ISO 9000ff. Equipment: DV case integral 4x4. With Fetra hand-flatbed truck,  ...

MIG/MAG/TIG/TIG/Electrode Welding Machine EWM Integral Inverter MIG 500 Pulse Manufacturer: EWM HIGHTEC WELDING GmbH. Made in Germany. Technical data: Welding current 5 - 500 A. Welding voltage MIG 14.7 - 39 V. Welding voltage TIG 10.2V - 30V Welding voltage electrode 20.2V - 40V. Max. welding current at: 60 %ED 500 A. Max. welding current at: 100 %ED 400 A. MIG/MAG pulse – welding, MIG/MAG – standard, (TIG – HF and Liftarc ignition) and rod electrodes - welding possible. 2-stroke welding or 4-stroke welding. Connection option for: handheld remote control, integralC10, C20, C30, C40, superPulsSP10 and SP11, robot interface RINT 1 and 2, vending machine interface, standard. DIN ISO 9000: standard connection of the documentation interface PCINT 1 for welding data documentation for DIN EN ISO 9000ff. Equipment: DV case integral 4x4. With Fetra hand-flatbed truck,  ...

Manufacturer: Trumpf Model: TruArc Weld 1000 Year: 2023 Condition: Used Stock number: 9392 Operating hours: 20 h Maximum arm reach: 1300 mm Number of axles: 6 pieces Source: Fronius TPS 320i C PULSE Rated current: 30 A Operating voltage: 24 V Machine weight: 2980 kg Height: 2818 mm Width: 2454 mm Length: 3605 mm The offer includes:, suction, Universal robot UR10e, Work table, Retractable partition wall, Linear axis, Protective cabin, Robot welding torches,

Tenoning spindle: 1 St. Number of milling agregates: 5 St. Spindle diameter: 50 mm Control: Weinig PC-Nexus Weinig Unicontrol 11 Window System with Extensive Tooling ----------------------------------------- Optionally available (at additional cost): - Weinig Univar 6 Rebating Machine (Price upon request!) - Götzinger PowerDrill Drilling and Milling Center for Windows and Doors (Price upon request) Manufacturers Technical Description: ----------------------------------------- Item 1: Weinig Unicontrol 11 Window System ----------------------------------------- Includes existing tooling sets: - IV 67 (Wood and Wood-Aluminum) - IV 77 (Wood and Wood-Aluminum) - IV 90 (Wood) Cross-cut Saw -------------------------------------------------------------- With laser alignment light, motor power: 3 kW, spindle diameter: 40 mm, electronically variable spindle speed with brake: 3,000–6,000 rpm. Ma ...

Used Used Zambelli shrink wrapper: Year: 2002 Condition: As Is Model: LFT 70 Year: 2002 Speed: 50 ppm Number of infeed lanes: 4 Types of bundles processed: 2.0 L still water, square bottle (3x2 format) 1.5 L still/carbonated water, round bottle (3x2 format) 1.0 L still/carbonated water, round bottle (3x2 format) ? ? 87.5 mm 1.0 L still/carbonated water, round bottle (3x2 format) ? ? 78.8 mm 0.5 L still/carbonated water, round bottle (4x3 format) Operation: automatic Version: film launching Type: film only Code: F 86 More details: https://bottlingscout.com

WATER PUMP 2 NOS LEFT SIDE AND RIGHT SIDE WARTSILA W32

Heavy-duty hydraulic strip or beam press, Wemhöner Type VS 4 S, for veneering strips, gluing timber or other pressing tasks. The press has four independently controllable pressing surfaces. Includes dismantling and loading. Fixed loading date: 15 June 2026. Glue applicator also available. Technical data: Working length: 3,090 mm Pressure: max. 104 t Condition: Gebraucht Location: Tauberbischofsheim, Germany

Weinig Unicontrol 10 (UC 10) mitre saw system for the manufacture of windows, components and doors. Suitable for frame-by-frame, batch or individual part production, with 2 tenoning and slotting spindles, including an Oertli tool set Units: 1. Cross-cut saw, NC axis, 3 kW, ø 40 mm, 2,800 rpm 2. First tenoning and slotting spindle, NC axis, ø 50 mm, 15 kW, Technical data: Clamping length: 640 mm (8 x 80) mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

Tenoning spindle: 1 St. Number of milling agregates: 4 St. Spindle diameter: 40/50 mm Weinig Unicontrol 6 -------------------------------------------- Machine will be checked in our factory before delivery! Technical Data Summary (Please inquire about any additional accessories included) Item 1: Cut-off saw -------------------------------------------- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3.0 kW > Laser guide light for identifying the saw cut CNC-controlled length stop ------------------------------------------- > Length: 3,600 mm > Electronic length stop including positioned cut-off saw Item 2: Tenoning spindle -------------------------------------------- > Number of tools: 3 (stroke 2 x 100 mm) or 4 (Stroke 3 x 80 mm) > Tool clamping length: 320 mm > Pneumatic vertical spindle stroke: 240 mm for wood ...

Tenoning spindle: 1 St Number of milling agregates: 4 St. Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 10 CNC - Spindles radially and axially CNC-controlled -------------------------------------------------------------- The machine was factory overhauled by Weinig in 2024. The control panel was also upgraded to a Siemens S 7 677 C, with a new membrane panel Touch. With the following machining units: Crosscut saw -------------------------------------------------------------- with laser alignment light, motor power 3 kW, spindle diameter 40 mm, spindle speed 3,000 Axially adjustable via NC axis Radial pneumatic adjustment to 8 positions for edge rounding from above Unit from below for edge rounding ------------------------------------------------------------- Axially adjustable with crosscut saw Tenon and slotting spindle --------------------------------------------- ...

Tenoning spindle: 1 St. Number of milling agregates: 5 St. Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 6 with NC spindles Machine will be cleaned and completely checked before delivery -------------------------------------------- Technical data summary (please enquire about any additional accessories included) Item 1: Cross-cut saw ------------------------------------------- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3 kW > Radial adjustment path pneumatically controlled to 8 positions, e.g. for edge rounding from above > Laser aiming light for detecting the saw section Item 2: Rounding unit horizontal below ------------------------------------------- > Position: horizontal below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length 25 mm > Spindle speed: 9,000 rpm > Max. to ...

Tenoning spindle: 1 St. Number of milling agregates: 4 St. Spindle diameter: 50 mm control: Weinig, PC-Nexus Weinig Unicontrol 6 with NC spindles ----------------------------------------- Machine will be cleaned and completely checked before delivery Technical data summary (please enquire about any additional accessories included) Item 1: Cross-cut saw --------------------------- > Electronic cross-cut saw, infinitely adjustable horizontally > Number of tools: 1 piece > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser aiming light for detecting the saw section > NC length stop, mounted on slot table included Positioning of the cross-cut saw integrated in the control system. > Length 3500 mm Item 2: tenoning spindle ---------------------------- > Number of tools: variable, infinitely variable adjustment NC axis > Tool clamping l ...

Tenoning spindle: 2 St. Number of milling agregates: 7 St. Spindle diameter: 50 mm control: Weinig, PC-Nexus Weinig Unicontrol 12 with radial and axial CNC spindles as well as VARIO table and milling carriage Machine dismantled professionally and in our warehouse in 73447 Oberkochen. Video and pictures were taken before dismantling. Technical data summary (please inquire about any additional accessories included) crosscut saw > Electronic crosscut saw, horizontally infinitely adjustable > Number of tools: 1 piece. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.7 kW > Laser directional light to detect the saw section > Axial adjustment path 150 mm NC axis, electronically infinitely variable > Radial pneumatic adjustment path 8 positions for e.g. edge rounding from above Rounding aggregate > Position: horizontally below > Motor power ...

x-travel: 4216,0 mm y-travel: 2007,0 mm z-travel: 305,0 mm control: CNC table-size: 4902,0 x 2134,0 mm max. workpiece weight: 1465 kg / m² machine weight ab.: 2500 kg total power requirement: 30 kW dimensions of the machine ca.: 5486,0 x 3708,0 mm The compact waterjet cutting system in bridge design consists of a torsion-resistant torsion-resistant steel construction, which is coated with a special durable anti-corrosion coating. coating. Both the two X-axes and the particularly high Y-axis are based on the Y-axis are based on the maintenance-free design specially developed by OMAX for the special requirements of a waterjet cutting system. specially developed by OMAX for the special requirements of a waterjet cutting system. Equipment: - Motorized Z-axis - Water level control - Abrasive system with AFS 1000 abrasive conveyor system - High-pressure system with special stainless steel hig ...

WIDOS HT 1500 CNC ist eine Kunststoffschweißmaschine von hoher Präzision, ausgelegt für zuverlässige und hochgenaue Schweißarbeiten. Angaben zu Arbeitskapazitäten (Durchmesser, Module, Verfahrwege, Werkstückmaße) liegen nicht vor. Haupttechnische Daten: Leistung der Heizung 2 kW; Anschluss 50 Hz, 3x 230 V; Maschinengewicht ca. 104 kg; Abmessungen L 880 x B 810 x H 700 mm. Wichtige Ausrüstung: elektronisches Handbedienpult, Spannwerkzeug, Satz Reduktionsspanneinsätze, Schnittstellenkarte PCMCIA, Transportkoffer. Gewährleistet enge Toleranzen und eignet sich für präzisionsorientierte Bereiche wie Automotive, Luftfahrt und Medizintechnik Technische Daten ohne Gewähr

GLOVE'S WATER TIGHT TEST MACHINE MANDRELS : 80 (40 LEFT T5863094 AND 40 RIGHT) TRANSPARENT

Manufacturer: STM Model: 4020 PremiumCut Type of Machine: Waterjet Cutting System Year of Manufacture: 2013 Condition: Used, Fully Functional Operating Hours: approx. 10,700 h Technical Specifications: - Effective cutting area: 4000 x 2000 mm - Heavy duty slats for workpieces up to 1,000 kg per square metre - CNC control NUM Axium Power, up to 30 m per minute - Z-axis CNC clearance height: 180 mm - Control cabinet: Premium console - Waterjet software: SmartCut - Computer with 20 inch LED monitor and splash-proof keyboard and mouse Main Components and Their Function: - Waterjet cutting valve - Abrasive cutting head - Positioning laser - Abrasive metering unit, CNC controlled, with intermediate container - Abrasive supply container, 250 kg - Abrasive minihopper system with pressure container - Double cable pull system to secure the working area - Automatic Abrasive Rinsing System: ...

gt;gt; Esab A6 GMD lasnaad volgsysteem De A6 GMD lasnaad volginrichting wordt gebruikt voor het positioneren en volgen van lasnaden van automatische lasmachines met alle soorten lasnaden waarbij een geleidingsrand aanwezig is die de sensorvinger kan volgen. De inrichting is ontworpen voor standaard ESAB-geleidingen en kan één of twee servomotoren tegelijk aansturen. gt;gt; Esab LAE 800 amp DC-bron De LAE-serie bestaat uit driefasige, ventilatorgekoelde DC-lasstroombronnen die zijn ontworpen voor zeer productief gemechaniseerd poederdek lassen of zeer productief MIG/MAG-booglassen. De toepassing betreft poederdek lassen. Het apparaat is verplaatsbaar op rails. 18 meter lengte beweging Afmetingen van de kraan zelf: 2800 x 2600 x 3300 mm

gt;gt; Esab A2-A6 procescontroller Selecteerbaar lasproces met vooraf ingestelde lasparameters (geheugen voor 255 parameterreeksen). Constante stroomsterkte of constante draadsnelheid. Zeer gebruiksvriendelijk. gt;gt; Esab LAF 800 amp DC-bron De LAF-serie bestaat uit driefasige, ventilatorgekoelde DC-lasstroombronnen die zijn ontworpen voor zeer productief gemechaniseerd poededek lassen of zeer productief MIG/MAG-booglassen. De toepassing betreft poederdek lassen. Het apparaat is verplaatsbaar op rails. 16 meter lengte beweging Afmetingen van de kraan zelf: 3200 x 2300 x 4000 mm

Dough weigher WP HATON, type: PARTA U 2012 -completely renewed- The universal dough divider Parta U2012 is suitable for all types of dough, such as wheat, mischweiz, rye, firm doughs (e.g. pizza dough) and soft doughs (e.g. baguette dough). - Two pistons for variable weights - Machine is overhauled, all parts renewed - Condition: Very good and as good as new - Ready for immediate use - 6 months warranty on all parts Visits and test runs are possible by arrangement.

Tenoning spindle: 2 St. Number of milling agregates: 7 St. Spindle diameter: 50 mm control: Weinig PC-Nexus Weinig Uncontrol 12 with radial and axial CNC spindles and VARIO table .. The machine has already been professionally dismantled and stored in 73447 Oberkochen Specifications summary (please inquire about any additional accessories included) .. crosscut saw .. > Crosscut saw electronically, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 3000-6000 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.7 kW > Laser guide light for detecting the sawing section > Axial adjustment path 150 mm NC axis, electronically stepless > Adjustment path, radial, pneumatic, 8 positions, e.g. for edge rounding from above rounding aggregate .. > Position: horizontally below > Axial adjustment path together with the crosscut saw. electronic length s ...

Number of spindles: 4 St. Number of tools: 11 St. Spindle diameter: 50 mm Spindle length: 285,125 mm length: 4000 mm width: 2000 mm height: 2200 mm Weinig Univar 10/3 folding machine --------------------------------- For milling around windows, doors and the like with uneven circumferential profiles. Machine suitable for wood thickness 68 to 92 mm Time required per frame milling, medium size 1.20 x 1.20 m - approx. 2 minutes. The available tool positions are selected using a selector switch on the control panel retrieved. Machine with 3 hydraulically controlled right precision Lifting spindles for holding 3 tool sets, 2 x 95 mm spindle stroke per spindle The spindle stroke takes place in a U-movement, so that the opening is possible for short parts The milling stop remains as small as possible. Spindle stroke horizontally fine Adjustable for both tool positions from the operator side. Ce ...

Tenoning spindle: 1 St. Number of milling agregates: 4 St. Spindle diameter: 50 mm Control: Weinig PC-Nexus Weinig Unicontrol 6 with NC spindles ----------------------------------------- Machine available for inspection while still in operation until September 2026 Summary of technical data (please inquire about any additional accessories included) Item 1: Cross-cut saw ---------------------------- > Electronic cross-cut saw, horizontally continuously adjustable > Number of tools: 1 unit > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser alignment light for identifying the cut position > NC length stop mounted on the slotting table included, positioning of the cross-cut saw integrated into the control system. > Length 3500 mm Item 2: Tenoning and slotting spindle ---------------------------- > Number of tools: variable, infinit ...

We are pleased to offer for sale a complete high-precision manufacturing cell designed for the production of long, helical and screw-profile components, including PCP and mud motor rotors, extruder and injection molding screws, compressor and pump spindles. The equipment includes: 1. 2008 LEISTRITZ PW190.8000.HP Peeling / Whirling — Fully Operational Capacity: 120 mm (4.72”) diameter × 8,000 mm (315”) length Machine weight: 92,594 lbs (42,000 kg) 2. 2011 LEISTRITZ LWN300 Milling / Hobbing — Fully Operational 3. 2009 LEISTRITZ PW300PM Milling / Hobbing — Not in Service 4. 2014 WEINGÄRTNER FINISH 450 Finishing / Polishing — Fully Operational This equipment forms a comprehensive production route covering roughing, profile machining, semi-finishing and final surface finishing of long, high-precision helical and screw-profile components. Typical applic ...

Safety workstation with cleanroom zone Manufacturer: Weiss Pharmatechnik Type: WIBObarrier vertical plus BGKVO 250/14 Year of Make: 2020 The workstation is still unused by the operator in Switzerland in 6 wooden boxes originally packaged by the manufacturer. This workstation was configured for a class D cleanroom and max. for OEB3 substances (medium toxic material) H 14 filtered clean air in quality ISO 5 according to EN 14644-1 with unidirectional flow and a flow velocity of 0.17 m/s to 1.00 m/s is led via the laminator in the hood area endash into the interior of the barrier via the product, so that a cleanroom zone is created here The visible surfaces are made of stainless steel 1.4301 and are brushed (RA

SCM Sandya Win Wide Belt Sander Working width 630 mm Grinding height 3 – 140 mm 1 combi unit Electric height adjustment Pneumatic Oscillation Two types of feed speed 5.5kw main power

Manufacturer: CLOOS Model No.: Welding robot Year: 2017 Condition: Used Stock number: 9507

WINDMÖLLER & HÖLSCHER Miraflex, 8 colors, gearless, Camera and inspection system recently renovated, Fast sleeve change, 4 motor per deck CNC position system, Computer supervision, Web width 1.050 mm., Print width 1.000 mm., Min print repeat 300 mm., Max print repeat 800 mm., Turret automatic unwinder and rewinder, Max reel diameter unwinder/rewinder 800 mm., Drying - 2 zones, 4 fans, 2 gas burners, Videocamera y.2024 with automatic quality inspection system, Corona treatment, automatic vyscosity control, Turboclean automatic washing system, closed chamber doctor blades, n.32 ceramic anilox sleeves : 10 x 400 L/cm- vol.3,5 ; 4 x 470 L/cm- vol.3,5 ; 4x 340 L/cm-vol.5,5 ; 2x 300 L/cm-vol.7 ; 2x 280 L/cm-vol.8 ; 2x 200 L/cm-vol.10; 2x 160 L//cm- vol.10; 2x 120 L/cm-vol.12 ; 2x 100 L/cm-vol.15 ; 1x 140 L/cm- vol 16,5 1x 60 L/cm- vol 20, N.260 print sleeves - 8 for each following repeats :m ...

flow meter (portable, in casing) with quick couplings 4 Cardan female (cup/lever) and male (ball) inpeller outside waterflow. With test sticker and certificat, EPA marked, , Field of application: Construction, Applicable material: Water, CE mark: yes, General condition: very good, Technical condition: very good, Visual appearance: very good, , = More information =, , Year of manufacture: 2025, Applicable material: Water, Technical condition: very good, Visual appearance: very good, Price: On request, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? Or would you just ...

Year of manufacture: 2021, Colour: Yellow, Technical condition: very good, Visual appearance: very good, Damages: none, Price: On request, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? Or would you just like to discuss what would be useful in your situation? , Dont keep worrying about it, just give us a call., We are available Monday through Friday between 7:00 a.m. and 6:00 p.m. Call, text, or email us, whichever you prefer., , Want to visit us? Yes, please!, , Our doors are open Monday through Friday from 7:00 a.m. to 4:00 p.m. On Saturdays, you are welcome by appointment.

Dont miss a drop with this impulse digital water meter, designed to accurately track your water discharge. Heres why its a must-have for your drainage installation:, Insight: With this digital water meter you have immediate insight into the amount of water you are pumping. No more guesswork, just accurate information., Easy Installation: No more hassle with complicated installations. Our digital water meter can be easily installed, so you can immediately benefit from the benefits., Dont wait any longer and choose our digital water meter today., Contact us for more information and find out how you can start measuring flow!, , = More information =, , Year of manufacture: 2024, Colour: Grey, Connector size: 4 Cardan, Quick coupler system: Yes, Technical condition: very good, Visual appearance: very good, Price: On request, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerent ...

BBA Handy 4 mechanical water meter DWI (overhead wheel), equipped with M- and V-part 4 system C (interchangeable with gimbal). Ultra lightweight, stackable, and lockable. Weight 16.1 kg, , Mechanical DWI, The DWI water meter operates using an overhead wheel inside the measuring tube. This allows for a large passage of dirt particles in the liquid, but the measuring tube must be filled for an accurate measurement., , Handy water meters, Water metering is a standard part of daily operations for many pump professionals. In some countries, it is even mandatory to measure how much water is pumped from A to B or how much groundwater is extracted from a specific area., , The Handy water meters from BBA Pumps are specially designed for use on mobile pumping systems. The combination of light weight, carrying handles, and ergonomic design makes these water meters ideal for field use. Each portable ...

8-color format: 1270 mm<br><br><br><br<br>br>

<br>Machine completely renovated; Pipe length: 56-164 cm Tube width: 35-70 cm Lower width: 7.7 - 22 cm 1 or 2-valve units Gravel-press-Gértel Option: S-compression G'rtel, Icoma<br><br><br>br>Verf Gbar: now

<br>Tube length: 48-140 cm Pipe width: 30-70 cm Lower width 7-16 cm 1 valve Lower Patch Unit 1 or 2 color at the bottom patch Gravel presses Option: S-Presses, Icoma<br><br>Still in operation: Yes<br>Verf Gbar: now

<br>Tube length: 55-132 (165) cm Pipe width: 30-70 (80) cm 4 plies, photocell, 2 rear color printers<br><br><br>Verf Gbar: at once

<br>Flush cut and kicked end tuber with belt ri's system, 4-ply, photo cell, 0/2 or 4 end button color printer, range perforating system<><br<br>Verf Gbar: at once