skoda w used for sale

Manufacturer: Eurotherm Year of Manufacture: 2019 Type of Machine : Manual Wash Booth with Automatic Spray Ring Condition: Good, regularly maintained (once per year) Cabin Dimensions - Internal Width: 4,000 mm - Internal Length: 7,000 mm - Internal Height: 3,500 mm - External Width: 4,100 mm - External Depth: 7,100 mm - External Height: 4,100 mm (double base tray) Construction - Cabin Type: Closed - Exhaust Air: Extraction at end of cabin - Panel Thickness: 50 mm with polyurethane insulation - Inner Walls: Stainless steel AISI 304 (V2A) - Outer Walls: Galvanized sheet metal, painted - Steel Profiles: Blue RAL 5002 - Access Door: 1 door, manual 4-leaf type, 4,000 x 3,500 mm, Blue RAL 5002 Exhaust and Ventilation - Air Flow Rate: 10,000 m3/h - Fan Motor Output: 1.5 kW - Droplet Separator: Yes - Chimney: Included, height 6.5 m - Lighting: 8 LED fixtures Automatic Spray Ring - Max ...

Manufacturer: Mitsubishi Model: W30FV2-2 Type: Wire EDM machine (Wire erosion) Date of Manufacture: November 2006 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Mitsubishi Model: W30FAS-2 Type: Wire EDM machine (Wire erosion) Year of Manufacture: 2006 Find more here - .ucymachines/ Contact us at - sales@ucymachines

A CNC precision grinding machine Peter Wolters with two opposing grinding wheels and a workpiece/carrier disc system for simultaneous machining of both workpiece sides is available. Carrier wheel outer diameter: 1050mm, carrier wheel ring diameter: 290mm, max. workpiece height: 100mm, machine dimensions X/Y/Z: approx. 2350mm/3400mm/2400mm, weight: approx. 7000kg, control: Siemens Simatic S7-400 with WinCC visualization, operating hours: approx. 7000h. Including twin loader, buffer table, CBN fine grinding wheels, dressing wheels, ultra-fine measuring system, temperature monitoring, remote maintenance system, wear compensation and alignment system. Without filter system and cooling system. Documentation available. An on-site inspection is possible.

Washing machine for planer heads Weinig type MTS Very good condition. Fully operational with Simatic OP 7 controller. Operator's manual. Machine can be taken over immediately.

Washing system for trolleys and rack trolleys ELIONA / CERTEL, type: WR100.125.190 -in good condition- - For frames max. 1,000 x 1,250 x 1,900 mm - Boxes max. 600 x 400 x H 360 mm - Steam, hot water - Heating type: electric - El. Connection: 3x 400 V + N + PE, 50 kW Visits and test runs are possible by arrangement.

CNC Wood Machining Centre manufactured in 2000. This SCM Windor 60 features multiple vertical profiling spindles and an integrated drilling unit, designed for complex wood profiling and drilling operations. It includes a dedicated window profile machining setup and a multi-station tooling arrangement. If you are looking to get high-quality wood machining capabilities, consider the SCM Windor 60 machine we have for sale. Contact us for further details.

We are offering for sale a complete used longitudinal beam welding line, comprising the following equipment: MACHINE 1 - TACK WELDING DEVICE - Manufacturer: Wehling - Type: Heftvorrichtung Langsträger - Year of Construction: 2015 - Power: 0.25 kW + 28 x 0.06 kW - CE Marked: Yes Technical Specifications: - Maximum beam length: 13,700 mm - Beam height range: 70 to 500 mm - Flange width: 150 mm and 120 mm (after conversion) - Flange thickness: 5 to 20 mm - Web plate thickness: 5 mm (to DIN 2768-1 tolerances) - Tack position: trough position, 45 degrees - Changeover time per beam pair: max. 10 minutes - Total unit length: 14,300 mm - 28 servo motors for individual height adjustment of beam supports - Rotatable base frame: 0 to 45 degrees - Permanent magnet clamping of the top flange - Siemens S7 control system - Touch screen operator interface - NC axis with programmable software switch ...

Waste-Box Collector, Waste Collector, Blower, Fan, Filter System, Radial Fan, Dust Extraction Blower, Fan, Extraction, Dust Blower -Dust extraction blower: with filter gases -Monitoring device: for the amount and quality of waste in the waste suction system -for sampling: on teasels or cleaners -Motor power: 2.2 kW -Speed: rpm -Inlet connection: 1x Ø 300 mm, 2x Ø 100 mm -Dimensions: 1200/800/H1700 mm -Weight: 248 kg

Offer for a gantry car wash from WashTec: • Car wash (car; Crafter); • Wash gantry with control: Washtec EasyWash size 29; • Water treatment: Washtec AquaPur; • Mileage: 300 vehicle washes; • Max. width: 2.48m; • Max. height: 2.90m; • 10 vehicle washes/h (washing; Portal 1x forward and 1x back; Drying; Portal 1x forward and 1x back); • Location: Hanover; approx. 300 vehicle washes!

Manufacturer: Perndorfer Model: WSS5020/1HD18 5/1ASK Year of Manufacture: 2011 Operating Voltage: 400 VAC Frequency: 50 Hz Back-up Fuse: max. 40 A Control Voltage: 24 VDC BHDT High-Pressure Intensifier - Manufacturer: BHDT - Type: Intensifier - Max. Working Pressure: 400 MPa (4,000 bar) - Max. Flow Rate: 3.8 l/min - Manufacturing Week/Year: 47 / 2011 NOT IN WORKING CONDITION / 100 HOURS ON METER Find more here - .ucymachines/ Contact us at - sales@ucymachines

PART NUMBER 7910 SPECIFICATIONS - max workpiece width 1350mm - max workpiece height 150mm – in advance: - rubber roller, pressure roller And the aggregate (metal cylinder grooved for calibration) II aggregate (two metal rollers, smooth + sequential shoe) - rubber roller, pressure roller - cleaning brush – from below: - Introductory roller, metal - pulling tape - Outlet, slip, metal roller - pneumatic oscillation of belts on photocells - electric table lifting - 2 types of feed speed 2-14m/min - main motor 5.5/15kW - brake - grinding height potentiometer - feed motor 0.75kW - working pressure 8bar - Extraction port diameter 200mm, 120mm - dimensions l/w/h 1860x2200x1980mm - weight 1995kg ADVANTAGES – German production – unpainted – DTR documentation – used grinder, very good condition Net price: 38900 PLN Net price: 9262 EUR d ...

Tenoning spindle: 2 Stk. Number of milling agregates: 5 St. Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 10 NC Window System — Optional: Extensive Tooling Set ----------------------------------------- Optionally available (at an additional cost): IV 68 Wood, Wood/Aluminum IV 78 Wood, Wood/Aluminum IV 68 Entrance Doors Manufacturers Technical Description: ----------------------------------------- Item 1: Weinig Unicontrol 10 NC Window System ----------------------------------------- Cross-cut Saw -------------------------------------------------------------- with laser alignment light, motor power: 3 kW, spindle diameter: 40 mm, spindle speed: electronically variable (with brake) from 3,000 to 6,000 rpm. Max. tool cutting circle: 400 mm Axial adjustment: 150 mm via NC axis Radial adjustment: pneumatic, to 8 positions for top edge rounding Horizontal bottom roundin ...

Checkweigher / Webbing Scale / Scale Manufacturer: Sartorius Condition: used Model: Sartorius WM 35600 x 400 Total length: approx. 660 mm Total width including control unit: approx. 750 mm Conveying height: approx. 800 mm, height-adjustable Belt width: 400 mm Strap type: smooth Including control cabinet Including SEW motor, 0.18 KW Including 2 sensors Instruction manual included For weighing products up to 35 kg Internal Article Number: 2026051505 Conveyor technology – reliable and immediately ready for use - The conveyor technology offered was in continuous operation until dismantling and is fully functional. Features: • Condition: fully functional, with usual signs of wear • Ideal for efficient and fast material transport • Professionally dismantled and packed safely for transport Pick-up address: Industriestraße 5, 47918 Tönisvorst Thank ...

Belt width: 400 mm, Power: 3 x 400V, 50Hz, 0.6kW, Dimensions: 1400 x 700 x 1650 mm, Weight: 166kg

Including:, CFS batter filter, Serial number: 94, Year of construction: 2002, Power: 3 x 400V, 50Hz, 0.12kW, Weight: 50 kg, Belt width: 600 mm, Dimensions: 1950 x 1200 x 1750 mm

This 6-axis PANASONIC TA-1800 robot welding cell was manufactured in 2012. It features a maximum reach of 1796 mm, providing flexibility for various welding applications. If you are looking to get high-quality welding capabilities, consider the PANASONIC TA-1800 robot welding cell we have for sale. Contact us for further details.

General SKU075B490 MakeGEA Westfalia Separator AG TypeSCA 220-02-33 No.8001 242 Year of construction1998 Mounted on framecheck Main Features MaterialStainless steel Motor15 KW Specified Features - Decanter Decanter:Three phase twin drive decanter: (1x) 3-Phase decantercheck Screw diameter220/125mm Motor15 kW, 400Volt + 4,0 kW, 400Volt With variable speed drive(2x frequency inverter) Max. rotor speed2700-5500 Rpm MaterialStainless steel General LocationBarneveld With switchgear(as is) Floorspace2,4x2,4 m Total height2,3 m Weight2800 kgConsumer wasteStarchBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersPaper & otherDiscountOrganicsE-waste & metalAnimal feedDyes & pigmentsDecantersPlastic & rubberMinerals & inorganicGEA WestfaliaIndustries > Recycling > Consumer wasteIndustries > Food & Feed > StarchIndustries > Chemical > BiotechnologyIndustries > Che ...

MAX DIAMETER 800 , MAX MODULE 10

This 5-axis MAVIJET MJT-W53D-4020 was manufactured in 2020, featuring a CNC 5-axis, bridge type design for precision waterjet cutting. It includes a high-pressure pump operating at 4000 bar and a rapid traverse speed of 30000 mm/min. The machine supports a cutting size of 4000 × 2000 × 250 mm and is equipped with a smart abrasive reserve tank. If you are looking to get high-quality cutting capabilities, consider the MAVIJET MJT-W53D-4020 machine we have for sale. Contact us for more information.

MAX DIAMETER 320 , MAX LENGTH 500

This 5-spindles WEINIG DIMTER PROFIMAT 23 E was manufactured in 1998. It features a working width of 230 mm and a working height range of 8-120 mm. The machine operates at a spindle speed of 6000 rpm and has a feed rate of 5-24 m/min. If you are looking to get high-quality wood planning capabilities, consider the WEINIG DIMTER PROFIMAT 23 E machine we have for sale. Contact us for further details.

General SKU201P112 LocationBarneveld MakeBOLZ GmbH No.M 1107 T 4402 Pressure Working pressure jacket3 Bar Main Features MaterialStainless steel Volume11800 Ltr. Motor15 KW Specified Features - Conical mixer Conical mixercheck Capacity11800 l (gross) Largest cone diameter2900 mm Cone height4900 mm Dished topcheck Manholeø 600mm With stainless steel armcheck Top drivecheck Motorscrew +/- 15 kW (400 V) 65 rpm Motorarm 1,5 kW (400 V) 35 rpm Cantilevered screwcheck With jacket1200 l (20m2) Max. temperature100°C MaterialStainless steel 1.4552 With jacketcheck General Year of construction1988 Floor space3,2 x 3,2 m Total height6,5 m Weight±7000 kg Extra Specifications- used as a cooler.Consumer wastePaints & coatingsPowdered foodsGeneric medicinesFine chemicalsStarchOther chemicalPlastic & polymersFeed additivesPaper & otherOther pharmaceuticsCosmeticsOrganic ...

General SKU201P079 MakePfaudler-Werke AG (DE) TypeT800 No.204401 Year of construction1971 LocationBarneveld Pressure Working pressure1.5 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialMild steel Volume898 Ltr. Motor1.5 KW Specified Features - Mild Steel Reactor Reactorcheck Capacity898 Ltr Vessel sizesdia.1100mm x1000mm Dished bottomcheck Dished top sidecheck Top connectionsdia.200mm, dia.80mm, (3x)dia.70mm Outletdia.50mm With jacket(174 Ltr) Max. temperature200 degr.C. With propellor stirrercheck Motor1,5 KW, 230/400 Volt (EEX) Speed mixing shaft86 rpm With jacketcheck Mild Steel Reactors MaterialMild steel General Floorspace1.4x1.2 M Total height2,6 M Weight1400 KG ATEX designedcheck Extra SpecificationsNot glassedConsumer wastePaints & coatingsOther chemicalRubberPlastic & polymersCatalysts & fillersPaper & otherSolvent ...

WACO - LECAB - WoodEye high speed planing-cutting-bundling line, Feed speed up to 200 m/min, - Lecab - Kallfass automatic de-stacking and infeed, - Waco Twin-resaw line, type BKW, - Lecab - Kallfass resaw outfeed and infeed planer, - Waco planer, type Maxi - 11 spindles, - WoodEye scanner system, - Lecab outfeed with bundling systems 1+2+3, - Outfeed 1 and 2 with integrated cross cut system, - Outfeed 1 - 3 with Fischer foil wrapping + Logopack labeling + automatic stacker, - Lecab outfeed system for wood packages, Full line in mint condition

A complete Stürtz window production line is available. 1) Stürtz STBAZ-IPT-4000-V bar processing system for frames, sashes and mullions, year of manufacture: 2004. 2) Stürtz SE HSM-25/26-Compact-Plus four-head welding machine for sashes, year of manufacture: 2006. 3) Stürtz 4MC Motion Control CNC cleaning machine for the sash line, year of manufacture: 2011. 4) Stürtz WST-25-CNC turning station at the sash cleaner (3), year of manufacture: 2011. 5) Stürtz SE-HSM-40/26-Compact-Plus horizontal four-head welding machine for frames, year of manufacture: 2006. 6) Stürtz 2MC Motion Control CNC cleaning machine in the frame line, year of manufacture: 2008. 7) Stürtz WST-30 turning station in the frame line, year of manufacture: 2008. 8) Stürtz SE-BHT-3000 brush lifting table as a stop and transport table before the sash stop, year of manufacture: 2008. 9) Stürtz FBS-1 sash hardware sc ...

TOP Cone Wrapping Machine Erka WMA 30 for all stalks such as Kornspitz and pretzel sticks, Simple cone wrapping machine mobile Connection 400V, 16A-CEE plug Used machine Visit our large exhibition!

This Waterjet Italy WL510 was manufactured in 2022. Its a waterjet cutting machine designed for precision in cutting a wide range of materials. Ideal for industries requiring detailed and accurate cutting work. Contact us for more information.

Washing and dewatering screw, conveyor screw, transport screw, screw conveyor, conveying technology, pipe conveyor screw, trough conveyor screw, trough conveyor screw -Conveyor screw: Washing and dewatering screw -Version: Stainless steel -Drive motors for augers: 2 units, 3 kW, 60 rpm -Conveyor screws: Ø 510 mm -Auger pitch: 4100 mm -Inlet/Outlet: mm -Number: 2 washing and dewatering screws available -Price: per piece -Dimensions: 2090/5460/H2180 mm -Weight: 2180 kg

wire diameter 3,1-5,2 mm nail length 13-150 mm capacity - pieces/min 370

diameter range 3,8-6 mm nail length 25-200 mm output - pieces/min 200

diameter range 3,1 - 5,2 mm nail length 13 - 150 mm output - pieces/min 370

diameter range 2,2-3,8 mm nail length 13-110 mm output - pieces/min 350

wire diameter 2,2-3,8 mm nail length 13-110 mm capacity - pieces/min 350

with assembly device for head plates wire diameter 2,2-3,8 mm nail length 13-110 mm capacity - pieces/min 350

diameter range 2,2-4,2 mm nail length 13-105 mm output - pieces/min 430

wire diameter 2,2-4,2 mm nail length 13-105 mm capacity - pieces/min 430

diameter range 2,0-4,0 mm nail length 50-100 mm output - pieces/min 800

diameter range 2,0-4,0 mm nail length 50-100 mm output - pieces/min 800

diameter range 1,8-3,4 mm nail length 13-80 mm output - pieces/min 550

wire diameter 1,8-3,1 mm nail length 10-75 mm output - pieces/min 420

wire diameter 1,8-3,1 mm nail length 10-75 mm output - pieces/min 420

diameter range 1,8-3,4 mm nail length 10-80 mm output - pieces/min 550

diameter range 2,1-3,1mm nail length 32-51mm output - pieces/min 1600

diameter range 1,0-2,4 mm nail length 10-50 mm output - pieces/min 700

diameter range 1-2,2 mm nail length 10-50 mm output - pieces/min 520

diameter range 0,8-1,8 mm nail length 10-40 mm output - pieces/min 550

wire diameter range 1,5-7 mm mesh width 15-80 mm line wire distance 15-80 mm working width 2100 mm mesh width automatic 200 mm output - strokes/min 22

line wire diameter 1,6-2,8 mm point wire diamter 1,4-2,5 mm output - meter/min 25-38

Waco - Jonab - Kallfass high speed cutting-planing-bundling line, Feed speed up to 200 m/min, - Jonab automatic de-stacking and infeed, - Waco Twin-resaw line, type BKW (with tilting infeed system), - Jonab - Kallfass resaw outfeed and infeed planer, - Waco planer, type Gigant- 10 spindles, - Jonab outfeed with bundling systems 1+2, - Outfeed 1 + 2 with integrated cross cut system, - Outfeed 1 + 2 with Logopack labeling + automatic stacker + outfeed, New full electric and retrofit was done in past