sk 12 used for sale

Shared oven Wiesheu EBO 5-124 Year: 2011 -Floor shop oven electric from Wiesheu GmbH -Oven is with 5 floors -each floor 120cm and 40cm deep -Year of construction 2011 -36.35 kW -with IS 600 control -top floor is with own control display -lower floors are each 1 control for 2 floors -Oven is mobile on rolls -Furnace with exhaust hood and vapour condenser

::TECHNICAL SPECIFICATIONS::: CNC Model: Selca CNC Version: 4045R Tool connection: HSK 63 Spindle power: 40Kw Number of spindle revolutions: 18000 Number of tools: 30 X Axis Travel: 1200mm Y Axis Travel: 1000mm Z Axis Travel: 600mm Rapid feed linear axes X Y Z: 60m/min Guides: roller Tilting rotary table: yes Tilting rotary table type: continuous Degrees tilting rotary table: - 30° +100° Table size: 860mm Permissible load on the board: 500Kg High refrigerant pressure: yes System with external tank with filter: yes Chip evacuator: carpet operated Other technical data: Drives: Simodrive 611 base with Selca adjustment boards The machine has been overhauled all axle roller guides, all ball screws and all bearings, axle geometry have been replaced

automatic case erector + case sealer T-100 BDE, case sealer T-10 year 1999, pallet loader PD-120, Thermal ink jet system Diagraph IJ 3000 ES autmatic erecting station + carton seamer T-100 BDE, carton sealer T-10 year of construction 1999, Layer palletizer PD-120, Thermal ink jet system Diagraph IJ 3000 ES

Communication module CM 1241 6ES7241-1CH32-0XB0 CM 1241 RS422/485 NEW GOODS - unopened Was delivered incorrectly.

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaTurning diameter500 mmSwing diameter over guide ways500 mmMax. Turning Length1200 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 Spindle speed-12000 rpmDrive power (100% ...

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length1200 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 Spindle speed-12000 rpmDrive power (100% ...

Capacity: 120 Amp. – 19 kVA X-axis: 800 mm Y-axis: 600 mm Z-axis: 400 mm Table dimensions: 1,100 x 700 mm Distance head - table: 950 mm (max) Oil retainer: 1,700 x 1,000 x 650 mm Workpiece weight: 4,000 kg (Max) Control: CNC Datic S120

automatic baler Manufacturer: UNOTECH Type: UPAMAT 120 V5/H3/So Hours: 85 hours Year of Make: 2022 specifications: Length of the channel baler: approx. 13,500 mm Width of the channel baler: approx. 2,400 mm Height of the channel baler: approx. 3,400 mm Weight of the channel baler: approx. 47,400 kg Filling opening: 1,020 x 1,600 mm Channel cross-section height x width: 750 x 1,100 mm Bale weight depending on length and material 600 - 900 kg Press force plunger: 1,000 kN at 260 bar Cutting force: 1,200 kN at 315 bar Electrical data: Operating voltage: 400 V/3 PE Frequency: 50 Hz Voltage tolerance: +/- max. 5% Degree of protection: IP 55 Control: Siemens S7 1.500 with two 410 litre axial piston pumps, each with 45 kW drive power, for an increase in output to approx. 410 m³/h. Pumps on pump plate completely piped and install ...

Cutting range round 0°: 127 mm Cutting area flat 0°: 125 x 130 mm Cutting range round 45° right: 90 mm Cutting area square 45° right: 90 x 90 mm Cutting range approx. 60° right: 45 mm Cutting area square 60° right: 45 x 45 mm Vice opening: 130 mm Band saw blade dimensions: 1440 x 13 x 0.65 mm Cutting speeds: 30 - 80 m/min Motor power: 0.55 kW Voltage: 230 V Weight approx.: 25 kg Characteristics: - Two cutting speed levels for optimal adaptation to the workpiece - For miter cuts, the saw bracket can be swivelled up to 60° - Including workpiece stop for rational work - Optimum cutting results thanks to band saw blade guide with ball bearings - High-torque engine, even under continuous load - Under load, the motor electronics keep the cutting speed largely constant - Environmentally friendly, as there is no need for lubricating and coolant fluids - Smooth, low ...

2012 Muratec MW 120 GT Metal 2012 Muratec MW 120 GT and more: Mori Seiki ZT 1500YB in operation, can be viewed during operation. 2002 yes Mori CL 2000 can be viewed under power. Currently not in operation 2004 yes Mori Seiki SL-204 can be viewed under power. Currently not in operation 2001 yes Mori Seiki SL-204 can be viewed under power. Currently not in operation 2003 yes Tsugami NP-32 can be viewed under power. Currently not in operation 1992 yes Riello in operation, can be viewed during operation. 2002 yes

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmMax. Turning Length1200 mmTurning diameter500 mmBar diameter max.65 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 ...

Available in stock 1 x Used Injector Nozzle Test Stand. Use the injector nozzle test stand to verify the shape and atomization of the injected test fluid and to leak test the needle seating. The equipment is used but in good working conditions.

Ball-bearing linear guide with 2 carriages, MR55-A2-1244-22-22-G1-V3-GP, Schneeberger, as good as new As good as new in original packaging! The high-quality part comes from a spare parts warehouse of a mechanical processing of a large automobile manufacturer, has been in stock for some time, is completely new and in the original packaging. Attention: We have many, bearing, high-quality ball screws, synchronous motors and linear guides in different designs. Take a look at our website of IPV GmbH. Linear guide with ball chain type MR55-A2-1244-22-22-G1-V3-GP of Schneeberger consisting of: -1 guide rail 55mm x 1244mm long - 2 pcs. guide car MR55-A2 Functional guarantee! For second-hand parts, we cannot provide a conventional guarantee and warranty. However, we give you a functional guarantee. If the device does not work during commissioning, you can return the goods and we ...

Labeler, make KHS, type: Innoket KL 2080/120-48, speed up to 50.000 bph, right-machine, for cold glue labelling, adjust to 0,33 lt. and 0,5 lt. Longneck-bottles as too 0,5 lt. NRW-bottles, with 2 aggregates for body-, shoulder- and back label, as too neck ring, with 48 bottle dishes, 5 gripper cylinder, 6 glue pallets, with steel glue roller, carousel-Ø: 2.080mm, pitch: 120 mm, with Siemens S7 control, built 2003

Product number: 2535 Type: Foodliner 12000/8 Serial number: WK43/07 Year of construction: 2008 Capacity: 18000 - 22000 cups/hr Cups: round Ø 55 mm, round Ø 65 mm Seal: aluminium Compressed air: 6 Bar, 800 l/min. Water: 3 Bar, 1.5 l/min. Power: 3 x 400V, 50Hz, 15kW Dimensions: 4250 x 2000 x 1800 mm Weight: 3500 kg Including Alpha Machine Vision Solution lid inspection system Including tool trolley

Mechanical/mechanical clamping system with force transmission, manually operated: mechanical/hydraulic clamping system · Deformation-resistant design for very high clamping accuracy · for use on machining centers with high quality and production performance · Drive spindle with clamping force presetting · grease fittings on both sides for lubricating all guides subject to wear and the spindle thread · Mounting thread M12 for workpiece stop · Stable chip protection prevents chips from penetrating the interior of the body · all guides hardened and ground · Height measurement of base body/workpiece support -0.02 · important for paired use · Supplied with step jaws reversible, hardened and ground. Other technical features: · Version: Model RKE - 3-sided clamping option · Can be clamped horizontally, vertically or laterally - Base body made of steel - hardened and ground - with fo ...

New Neu Anlasser / Bosch Starter 0001601007 Passend für die Motoren DEUTZ / MWM / Caterpillar Energy Solutions Typ TBG 620(k) und TCG 2020.

We have available in our stock 2 units Wartsila Nohab WN 12V25 complete diesel engines 2760 Kw at 900 RPM Please contact us at: infofin-marine.com

Bohrleistung in Stahl (-Ø: 45 mm throat: 1250 mm workpiece height max.: 1100 mm swival range +/-: 360 ° height adjustment: 745 mm base plate surface area: 1450 x 920 mm Bohrspindel-Ø/ Aufnahme: 90 mm / MK 5 bore spindle stroke: 355 mm max. torque on the spindle: 250 Nm feed power: 14000 N turning speed range: 20 - 1200 U/min feed range: 0,063 - 0,63 mm/U power capacity: 3,7 kW weight of the machine ca.: 3,0 t dimensions of the machine ca.: 2,1 x 0,9 x 3,3 m • cube table 650 x 650 x 500 mm, • coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Model SC-120 Corn cutter provides maximum product recovery, high throughput, low maintenance and automatic corn removal from the cob at high speed. Each ear is placed on the feed through chain, tip end first. The stainless chain moves the ear of corn into the feed rolls. Two sets of feed rolls line the ear of corn up with the cutter head and move the earinto the cutter knives. The cutter knives are automatically openend for cutting by the feed roll gauging sytem. Kernels fall through the head and is discharged to a takeaway conveyor. A water spray is directed into the cuto-off corn area to minimize the starch build up.

Technical data for the pallet rack traverse: Shelving system: Elektrolux The scope of delivery includes: 01x pallet rack traverse, used Material color: orange Box profile: 120 x 50 mm Truss type: 120|16 clear width: 2,700 mm Design: Head traverse

Technical data for the pallet rack traverse: Shelving system: Elektrolux The scope of delivery includes: 01x pallet rack traverse, used Material colour: silver grey Box profile: 120 x 45 mm clear width: 1,900 mm Design: Head traverse

Heating oil Tank system Diesel tank and other hazardous substances. 50,000 litres capacity according to DIN 6616/D, above ground, double-walled incl. officially recognized test certificate. Tank environmental protection Wozniack . Specialist company according to § 19 Water Resources Act (WHG) offers as follows. Storage tank 50,000 litres double-walled new according to EN 12285-2 standard . The tank is new and will be equipped with the following fittings: 1 optical leak detector with type approval and leakage fluid(new) 1 filling tube with TW closure (filling cap) and dip tube, 1 sounding tube with dipstick and dipstick closure, 1 vent pipe with vent hood, 1 brand-new limit value transmitter with type approval (AIII)(new) 1 ladder Container dimensions Length 10.7000 mm Diameter 2500 mm Weight approx. 9.000 kg Of course, you can also design your tank s ...

Technical data for the top-up tabs: Manufacturer: Jung Heinrich Type: MPB The scope of delivery includes: 02x Aufstocktabschen, used Total length: approx. 400 mm Total width: approx. 129 mm Internal width: approx. 121 mm f. Frame profile width: approx. 120 mm Depth: approx. 49 mm Material thickness: approx. 4.00 mm Hole spacing i. d. depth: approx. 100 mm Hole grid i. d. width x height: approx. 85 x 100 mm BoreholeØ: approx. 10 mm Material color: blue Weight / pcs.: approx. 2,59 kg Hint: No screw material included.

Notching cutter Wegoma Type: AKF 125 for milling plastic and aluminium profiles with profile stop on both sides swivel 60° Pneumatic clamping device Manual feed with hand lever of the three-phase milling motor Engine start directly at the hand lever Suction nozzle with a diameter of 100 mm running on the milling carriage Profile stop adjustable without tools with locking bolt for 90° and 45° on both sides Power milling motor 1.5 kW Speed milling motor 2800 rpm Milling path max. 380 mm Milling cutter diameter/height max. 210 mm/ 90 mm Milling spindle diameter 27 mm Dimensions: L 700 mm x W 500 mm x H 700 mm Weight approx. 50 kg

offer 22391 Specifications: - Cutting length up to 200 mm - Cutting thickness - steel with 400N/mm² strength 6 mm - Stainless steel with 600 N/mm² strength 4 mm - infinitely variable cutting angle adjustment 30 - 120 ° - pneumatically clamped - automatic cutting gap adjustment - Locking stops left + right each 300 mm - Table support surface 1000 x 800 mm - with T-slots and depth stops - Table height approx. 900 mm - Depth stops - Drive 400 V / 4 kW - E – Foot switch - Space requirement approx. W 1000 x H 1350 x D 1510 mm - Weight approx. 1800 kg

Veneer assembly machine model FWL 1200, Joining, gluing, thread and white gluing

Kneader Kemper F125 SL Kneading Machine Menger -Lifting kneader with fixed boiler -for max. 200 kg dough or .max 125 kg flour -with 2 speeds -Stainless steel boiler and lifting arm -with flour dust cover -Boiler diameter inside 90cm -Boiler height inside approx. 50cm -can be used on wheels with 2 locks

Corona pretreatment plant of AFS AVE-120D-KER3/1200 with generator G-30 S-111 (3000 W) For sale is a corona pretreatment plant from the renowned company AFS, type AVE-120D-KER3/1200, including generator G-30 S-111 with an output of 3,000 watts. The system is used for surface pretreatment of films, papers and other non-conductive substrates to ensure optimal adhesion of printing inks, varnishes or adhesives. Technical data & equipment: Manufacturer: AFS Type: AVE-120D-KER3/1200 Generator: G-30 S-111 Power: 3,000 W Working width: approx. 1,220 mm Treatment: Corona (electrical discharge) Application: Pretreatment of plastic films, composite films and similar materials Condition: Used, functional and in good technical condition Operating hours: approx. 50 Particularities: Compact, robust design for continuous industrial operation Low maintenance  ...

Spiral Kneader Diosna SP 120 AF Spiral kneader Diosna SPV 120 AF extendable - Spiral kneader extendable - for max. 120 kg dough or .max 75 kg flour - 2 speeds -Membrane keyboard - with 1 extendable stainless steel boiler - Spiral made of stainless steel - with pliers locking - Boiler is with friction wheel drive - Head hydraulically raising and lowering - Vat capacity 180 litres

Linear drive, spindle axis, stroke 1135, EGC-120-1135-BS-25P-S-KF-0H-MR-GV, 556809, Festo, mint condition Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition with traces of storage! The part was bought from a spare parts warehouse of a company, was there for some time in stock but never in operation and has little storage traces Festo spindle axis, linear module, liner drive, linear slide EGC-120-1135-BS-25P-S-KF-0H-MR-GV, 556809, Overall dimensions: 1625x130x110mm, approx. 55kg, slide 300x70mm, stroke 1135mm, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded i ...

Spiral kneader Kemper ST 125 A + 2 boilers used spiral kneader Kemper ST 125 A extendable with 2 stainless steel boilers immediately available in the warehouse in Bielefeld. Trade-in and shipping costs on request. Type: SP 125 A with 2 boilers, optional extra boiler to purchase for max. 125 kg flour or for max. 200 kg dough with 2 automatic timers Boiler diameter 90cm -Bott capacity: 300 litres Boiler drive by friction wheel Boilers are manually locked extendable with 2 automatic timer relays 2 speeds fast and slow Flour dust cover Stainless steel spiral and tools Boilers are also made of stainless steel Machine is anchored in the ground with 2 screws Machine head moves up and down when the boiler is retracted and extended 400 volt power supply robust and stable machine Tested for function

Spiral dough mixer with fixed stainless steel kettle for max. 120 kg dough. Vat cover with swivelling lid part, motor protection by overcurrent relay, electrical switching and control unit in the machine. Kneading process over time with 2 timers and synchronous motor, with automatic switching and switch-off. -Type: SP 120 D -mobile -for max. 75kg flour or for max. 120kg dough- -with 2 automatic timers -Stainless steel spiral and boiler -Boiler diameter 75cm -Boiler capacity approx. 180 litres -Machine mobile on castors with a swivel castor -Locking by 2 locks -with plastic flour dust cover -400 Volt Frequency 50 Hz -8 kW 18A -Weight of the machine approx. 550 kg -Condition "very good" as good as new

Deck oven Miwe Condo CO 5.1208 Bakery oven Electric -5 floors each 120x80cm -each floor with Miwe FP control -each floor separately controllable -Top and bottom heat can be controlled separately -each floor with separate steam function -with proofing cabinet -with steam capacitor -with exhaust hood -Floor entrance height 17cm Internal height 16cm -Power: 49,1 kW -Year of construction 2010 -External dimensions Width: 150cm Depth without hood: 132cm with hood +40cm Height without hood: 238cm with hood +20cm

Submersible pump, 250 L/min, 27 m, STA404/500-GX+121, Brinkmann Pumps, mint condition Special price If you have a VAT number, we will gladly issue you an invoice without VAT. As good as new! The pump was purchased from a company's spare parts warehouse, was in its original packaging, has never been used and is completely new. Submersible pump, 250 L/min, 27 m, STA404/500-GX+121, Brinkmann Pumps, as good as new, Immersion depth 500 m, Connection flange AD 180 mm, TK160 mm z=4, required opening for cover D140 mm, IP55, 2.6 KW, 230/400 V Special design: Base cover and impeller made of grey cast iron, shaft made of stainless steel 1.4104 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us.  ...

We sell a Sinmag spiral kneading machine incl. 3 tank cars (suitable for max. 120kg dough). The machine is in good bakery condition.

Pre-welding flange diameter DN 1200 pressure stage PN 6, stock goods, 2 pcs. new, primed, shipping possible worldwide, price per piece ex stock. Other dimensions can also be offered.

Rated current (A): 1000, Poles: 3; Gross weight [kg]: 41; Accessories: Multiple breakers in stock!, NEW/UNUSED

New and unused 2023 generator set with 0 running hours.; Gross weight [kg]: 7753; Engine: Perkins 4008-30TAG3; Accessories: Battery, Control Panel, Including : coolant heater and battery charger

Rated current (A): 3200, Poles: 4; Gross weight [kg]: 75; Accessories: Multiple breakers in stock!, NEW/UNUSED

Rated current (A): 4000, Poles: 4; Gross weight [kg]: 99; Accessories: Multiple breakers in stock!, NEW/UNUSED