sizing used for sale

1 SUCKER MULLER high performance sizing machine for cotton warps year 1985, composed of: beam creel type ZA for 16 beams, device for feeding from sectional beam, 1st sizing unit type SD M1, roller width 2000 mm, double dip, double nip with pressure adjustment, 2nd sizing unit type SD M2, roller width 2000 mm, double dip, double nip with pressure adjustment, cylinder dryer type ZT-ZG, steam heated, total 8 cylinders (6 of these cylinders are teflonized), diameter 800 mm, beaming unit WN10, maximal beam pipe width 2700 mm, working width 2400 mm machine supplied with size kitchen

Automatic panel sizing beam saw with rear lifting table Max panelsizes when rear loading: 5600mm x 2240mm Max. cutting length x width: 5600 x 5600 mm. Max. stack weight for the lift: 10 ton max stack height 580 mm Saw blade outstand: 125mm Main cutting motor 13,5 kW Sawblade diameter 450 mm. Scoring saw motor 2,2 kW Feed speed of the saw carriage, forward 5 to 150 m/min, return 150 m/min Speed of the pusher 80 m/min Number of grippers: 9, centers 75/275/475/1075/1775/2475/3275/4075/4875 mm. 5 air flotation tables in the front 2810 x 650 mm Controlls: CAD-matic 4.0

CNC panel sizing saw, manufacturer: SCHELLING, type: FL 580, year of manufacture: 1999, serial no.: 211.204, working width: approx. 5,800 mm, saw feed max. 100 m/min., engine outputs: saw motor 19 kW, scoring machine, motor 1.5 kW, air cushion turntable, slide-in trolley with scissor clamp, roller rail, pressure beam, control panel, machine accessories

Sizing saw Brand Panhans Type: 680 / 200 New machine Basic construction - Solid German machine construction - approx. 1150 kg - Machine body manufactured as a stable welded frame construction from strong-walled steel profiles. - The torsion-resistant and finely planed cast iron table top is mounted on the machine body. - The robust and powerful sawing unit built into the machine body is the guarantor for precise saw cuts. - The complete saw shaft unit is dynamically balanced, double-guided swivel segments made of gray cast iron with double column guide for height adjustment as well as the circular saw shaft with 2 ball bearings ensure absolutely smooth running. Supports and stops - The ball bearing-mounted double roller carriage is smooth-running and maintenance-free. Precise and clearance-free running over the full length, guided with hardened and ground prismatic guides ...

Cutting length: 4400mm, cutting width: 2200mm, working height: 950mm, blade projection: 107mm, main motor power: 13.5kW, length: 11,144mm, width: 7144mm, weight: 7.5t, with documentation, without accessories or spare parts, the machine is located in Romania.

With feeder and destacker Wemhöner 184.

Carriage 3m40 Main motor: 5.5 kW Speeds: 3000, 4000, 5000, 6000rpm Sawblade tilting: -45 ? / 90 ? motorized automatic Sawblade rise, fall and tilt motorised Motorized automatic right stopper 1m35 Cross fence for cutting up to 3m20 automatic motorized Max sawblade 450mm

Description: Very well maintained and powerful panel saw with:  , label printer integrated in pressure beam motorical stroke of scoring saw machine table completely equipped with air cushion dynamic package saw saw carriage and pressure beam option for thin panels with combi-profile rails , option for grooving panel thickness min/ max. 0,8/60 mm 4 pneumatical trimming fences at ,75 / 475 / 1075 / 2625 mm lifting element for full packages postfroming aggregate label printer Pica II data transfer to storage systems with CE certificate. For further technical details please see pdf -files Read off operating hours: 2,698 h, main motor: 11 kW, serial number: 0-240-82-5052, cutting length: 4,300 mm, saw blade protection: 80 mm, collets: 6 pieces, main saw blade: 350x4.4x60 mm, scoring saw blade: 180x4.4-5.4x45 mm, saw carriage speed forward: 1-130 m/min, saw carriage s ...

Tube forming mill OME 320x8mm (A3782) Tube forming mill OME 320x8mm (A3782) for tube production of 323mm maximum diameter and 8mm maximum wall thickness Make: Ome (Italy) Material: HR, CR, Galv Condition: New Tube Diameter: 168mm – 323mm Wall Thickness: 2mm – 8mm Direction: L-R Speed: 35 meters per minute FORMING MILL Pass N. 1 Driven Forming # 1 Pass N. 2 Driven Forming # 2 Pass N. 3 Driven Forming # 3 Pass N. 4 Driven Forming # 4 Pass N. 5 Driven Forming # 5 Pass N. 6 Driven Forming # 6 Pass N. 7 Side Idle Forming Pass N. 9 Driven Forming # 7 Pass N. 10 Side Idle Forming FIN-PASS SECTION, SINGLE POINT ADJUSTMENT Pass N. 11 Driven Fin Pass # 1 Pass N. 12 Side Idle Fin Pass Pass N. 13 Driven Fin Pass # 2 Pass N. 14 Side Idle Fin Pass Pass N. 15 Driven Fin Pass # 3 Pass N. 16 Driven Fin Pass # 4 SIZING SECTION Pass N. 26 Driven Sizing # 1 Pass N. 27 ...

Tube forming mill OME 320x8mm (A3782) Tube forming mill OME 320x8mm (A3782) for tube production of 323mm maximum diameter and 8mm maximum wall thickness Make: Ome (Italy) Material: HR, CR, Galv Condition: New Tube Diameter: 168mm – 323mm Wall Thickness: 2mm – 8mm Direction: L-R Speed: 35 meters per minute FORMING MILL Pass N. 1 Driven Forming # 1 Pass N. 2 Driven Forming # 2 Pass N. 3 Driven Forming # 3 Pass N. 4 Driven Forming # 4 Pass N. 5 Driven Forming # 5 Pass N. 6 Driven Forming # 6 Pass N. 7 Side Idle Forming Pass N. 9 Driven Forming # 7 Pass N. 10 Side Idle Forming FIN-PASS SECTION, SINGLE POINT ADJUSTMENT Pass N. 11 Driven Fin Pass # 1 Pass N. 12 Side Idle Fin Pass Pass N. 13 Driven Fin Pass # 2 Pass N. 14 Side Idle Fin Pass Pass N. 15 Driven Fin Pass # 3 Pass N. 16 Driven Fin Pass # 4 SIZING SECTION Pass N. 26 Driven Sizing # 1 Pass N. 27 ...

Other Info: Keyseating machine POLYMAT - STUHLMANN POL 50 Keyseating machine 3 - 50 x 400 mm MACH - ID 6374 Make: POLYMAT Type: STUHLMANN POL 50 YOP: 1975 Table Ø   675 x 550 mm Ram adjustment    400 mm Stroke    0 - 400 mm Power    5.5 kW Groove width 3 – 50 mm Drawing length 400 mm Working speed strokes / min Cutting speed 0 – 20 m / min Return speed 40 m / min Length    1.100 mm Width     1.250 mm Height    1.400 mm Weight    1.600 kg

Rotary mill M-SP-MIL-4 Producer IL SUNG Type The main technological model M-SP-MIL-4 Producer IL SUNG Year of release: 2003 1. Purpose Grinding large fractions of raw materials (semi-finished products) Main technical features Parameter value Shaft rotation speed 0-3000 rpm Power supply 380V / 50 Hz Resource consumption 4.7 kW Perforated sizing mesh No. 1, mesh diameter 2.5 mm Perforated sizing mesh No. 2, mesh diameter 2 mm Perforated sizing mesh No. 3, mesh diameter 1.5 mm Perforated sizing mesh No. 4, mesh diameter 1.2 mm 2. Special requirements for installation and assembly Installed horizontally on a vibration-resistant foundation 3. Power lines Power supply 380V / 50 Hz 4. Supply line points Three-phase power socket 5. Resource consumption 4.7 kW 6. Equipment performance 100 kg / h

Description: Max. panel width 3300 mm Min. edge thickness 0.4 mm Max. edge thickness 3 mm Max. forward feed speed 30 m/min Conveyor Track with dogs , Pressure with rubber belt NO. PANEL SIZING / MILLING , Unit : scoring unit motor power : 4.4 KW r.p.m. : 6000 RPM NO. PANEL SIZING / MILLING , Unit : double chipper, top and bottom Constructor model : 75.30 NO. PANEL SIZING / MILLING , Unit : miller hogger NO. PANEL SIZING / MILLING , Unit : miller hogger Edge coil magazine , no. positions 2 glue pot for EVA hot melt glue , premelter for EVA hot melt glue , Roller set to press the edge , no. pressure roller 5 No. Edge Processing Units , Processing Unit : end trimming Constructor model : 08.412 no. motors : 2 Processing Unit : fine trimming to trim and round Constructor model : 08.055 no. motors : 2 Processing Unit : Corner rounding Constructor model : ...

3″ x .125″ Oto Mills – Someron HF Tube Mill Make (Entry Section): Oto Mills, Make (Forming & Sizing): Somenor, Maximum Pipe Diameter: 76mm, Wall Thickness: 0.8mm – 3mm, Shaft Diameter: 60mm Direction: Right to Left. Abbel Jib Crane, Mandrel Uncoiler, Weight Capacity: 10,000Lb, Powered Mandrel Expansion. Automatic Shear & End Welder, Hydraulic Shear, Automated Torching Head, Vertical Otto Mills Accumulator with DC Motor Drive, Driven Entry & Exit Guiding Rolls, Driven Entry Pinch Rolls, Adjustable Edge Guides, 5-Roll Coil Flattener. Forming Mill with Six Forming Stands, Seven Side Stands, Individual Gear Boxes, Universal Drive, Complete Set of Second Rafted Forming Stands, Motor: 60HP DC Drive. Welding Section with Emmedi 200Kw High Frequency Welder, 3-Roll Mechanical Squeeze Box, ID Scarfing Head, Powered Bead Re-Winder, Extended Cooling Section. Sizing Mill with Four (4) Sizi ...

Oto mills 127mm x 5mm HF Tube Mill with Packaging Line Make: Oto Mills Year New: 2000 Tube Diameter: 38mm – 127mm Wall Thickness: 0.9mm – 5mm Speed: 100 meters per minute Direction: Right to Left Material Strength: 360 – 510 MPa Tooling: 17 sets, Round, Square, Rectangular Entry Coil Car Floor Standing V-Type Design Powered Traverse & Lift Mandrel Uncoiler Powered Expansion Powered Hold – Down Roll Sliding Base Feed-Up Motor Shear & End Welder TIG Power Supply Mechanical Shear Driven Pinch Rolls Coil Straightening Machine Horizontal Accumulator Entry & Exit Pinch Rolls Coil Feeding Unit Variable Speed Drive Forming Mill Shaft Diameter: 80mm Eight (8) Forming Stands Seven (7) Side Forming Stands Horizontal & Vertical Stand Adjustment Individual Gear Boxes Universal Drive Variable Speed DC Motor Drive 300Kw High Frequency Welder 3-Roll Adj ...

406mm x 14mm API Pipe Mill Year New: 2006 Material Grade: X70 / X52 Pipe Diameter: 4.5" - 16" Wall Thickness: 4mm - 14mm Pipe Length: 6m - 14m Coil Width: 1350mm Coil OD: 2200mm Coil Weight: 25 ton Four (4) Entry Storage Area Floor Standing V-Type Coil Car Mandrel Uncoiler (5.5Kw Drive) Automatic Shear & End Welder Coil Straightener Horizontal Accumulator Forming Mill Six (6) Forming Stands Three (3) Side Clusters Four (4) Finn Passes 280Kw & 355Kw Forming Drives Welding Section Mechanical 4 - Roll Squeeze Box 800Kw EFD High Frequency Welder Two (2) Mid Frequency Annealing Heads Sizing Mill Four (4) Sizing Stands Two (2) Straightening Turk Heads 200Kw & 400Kw Sizing Drives Milling Flying Cut Off Rotary Double Saw Blades Diameter: 355mm Speed Accelerating System Digital Length Control Hydraulic Cut-Off Drive Mechanical Traverse Powered Run-Out  ...

Description: Panel Sizing Units 2 PANEL SIZING UNITS 1 Unit : miller hogger PANEL SIZING UNITS 2 Unit : scoring unit Approx. Onsite Dimension. (l x w x h): 3,650 x 2,100 x 2,100 mm, weight approx.: 2,381 kg

pressure: 100 t chamfer lenght: 3100 mm distance between columns: 2550 mm column arm: 450 mm ajustment speed: 160 mm/sec working feed: 10 mm/sec return speed: 120 mm/sec work stroke: 270 mm back stop - adjustable: 650 mm table height: 850 mm table width: 100 mm tank capacity: 200 l total power requirement: 7,5 kW weight: 7,5 t Overall size: 3,76 x 2,15 x 2,76 m GENERAL SPECIFICATIONS Hydraulic operation with two cylinders – Assistmach High performance hydraulic gear pump – Rexroth High pressure filter (with clogging detector and bypass) placed before all components, Air removal filter in the reservoir Fast descent by gravity, bending phase and return of the ram are controlled electronically via a proportional flow valves h Bending force controlled by proportional pressure valves – Rexroth Quality oil with high viscosity index Frame is designed and sized using Analyze program Hydrau ...

76mm x 6mm Oto Mill HF Tube Mill Make: Oto Mill, Year New: 2005, Tube Diameter: 15mm – 76mm, Wall Thickness: 1mm – 6mm, Shaft Diameter: 100mm, Speed: 140 mpm, Direction :R-L. Double End Uncoiler with Coil Car, Crop Shear & TIG End Welder, Vertical Accumulator with 80Kw DC Drive, Forming Mill with Seven Forming Stands, and Seven Fin Passes, 110Kw DC Drive, and 70Kw DC Drive, Welding Section with 350Kw HF Thermatool Welder, Adjustable Sqeeze Box, Inside and Outside Scarfing Head, Bead Re-Winder, Cooling Section, Sizing Mill with Four Sizing Stands, and Four Fin Passed, Four Double Sided Turk Heads, 110Kw DC Motor, Friction Type Flying Cut-Off Saw with 74Kw DC Drive, Run Out Conveyor, and Table. Updated Electrics, LCD Display Controls, Hydraulics

Description: Type of edging Thin edge Thick edge Gluing System EVA Hotmelt Premilling Unit yes Corner Rounding Unit yes Max feed speed 11 m/min Maximum panel thickness 50 mm Operating Units 8 nr Min. panel height 8 mm Max. panel height 50 mm Min. edge thickness 0.4 mm Max. edge thickness 3 mm Max. forward feed speed 11 m/min Top pressure yes Panel support guides yes No. Panel Sizing / Milling units 1 NO. PANEL SIZING / MILLING UNITS 1 Unit : pre-milling unit automatic timed intervention : yes motor power : 2.2 KW Edge coil magazine yes no. positions 1 Gluing system yes glue pot for EVA hot melt glue yes Roller set to press the edge yes no. pressure roller 3 No. Edge Processing Units 5 NO. EDGE PROCESSING UNITS 1 Processing Unit : end trimming no. motors : 2 motor power : 0.18 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 2 Processing Unit : top and bottom rough trimming no. motors : 2  ...

Description: Type of edging Thin edge Thick edge Gluing System PUR Combination Squaring Edgebanding Machine First Pass Max Panel Width 3000 mm Max feed speed 40 m/min Operating Units Right Side 10 nr Operating Units Left Side 10 nr Min. panel height 8 mm Max. panel height 60 mm Min. panel width 240 mm Max. panel width 3000 mm Min. edge thickness 0.4 mm Max. edge thickness 3.5 mm Max. forward feed speed 40 m/min Top pressure yes Pressure with rubber belt Panel support guides yes No. Panel Sizing / Milling units Left Side 1 NO. PANEL SIZING / MILLING UNITS LEFT SIDE 1 Unit : double chipper, top and bottom Constructor model : KD 11 motor power : 4.5 KW r.p.m. : 6000 RPM Same technical characteristics on the left side yes Edge coil magazine yes no. positions 12 Gluing system yes glue pot for PUR glue yes premelter for PUR glue yes Roller set to press the edge yes No. Edge Processing Units 8  ...

Description: Type of edging Thin edge Thick edge Solid wood Gluing System EVA Hotmelt Premilling Unit yes Corner Rounding Unit yes Max feed speed 14 m/min Maximum panel thickness 60 mm Operating Units 8 nr Min. panel height 8 mm Max. panel height 60 mm Min. panel width 70 mm Min. edge thickness 0.3 mm Max. edge thickness 3 mm Max. forward feed speed 14 m/min Top pressure yes Pressure with idle wheels Panel support guides yes with positioning by NC yes No. Panel Sizing / Milling units 1 NO. PANEL SIZING / MILLING UNITS 1 Unit : pre-milling unit automatic timed intervention : yes motor power : 2.2 KW Lamps to preheat the side of the panel yes Edge coil magazine yes no. positions 1 Gluing system yes glue pot for EVA hot melt glue yes premelter for EVA hot melt glue yes Roller set to press the edge yes no. pressure roller 3 with positioning by NC yes No. Edge Processing Units 6 NO. EDGE PROC ...

Description: Type of edging Thin edge Thick edge Solid wood Gluing System PUR Premilling Unit yes Corner Rounding Unit yes Grooving Unit yes Max feed speed 24 m/min Maximum panel thickness 60 mm Operating Units 9 nr Min. panel height 12 mm Max. panel height 60 mm Min. edge thickness 0.4 mm Max. edge thickness 20 mm Max. forward feed speed 24 m/min Top pressure yes Pressure with rubber belt Panel support guides yes No. Panel Sizing / Milling units 1 NO. PANEL SIZING / MILLING UNITS 1 Unit : pre-milling unit automatic timed intervention : yes Gluing system yes glue pot for PUR glue yes premelter for PUR glue yes premelter for PUR glue NORDSON Roller set to press the edge yes with positioning by NC yes No. Edge Processing Units 7 NO. EDGE PROCESSING UNITS 1 Processing Unit : end trimming no. motors : 2 NO. EDGE PROCESSING UNITS 2 Processing Unit : top a ...

Description: Type of edging Thin edge Thick edge Solid wood Gluing System EVA Hotmelt Corner Rounding Unit yes Max feed speed 11 m/min Maximum panel thickness 55 mm Operating Units 7 nr Min. panel height 8 mm Max. panel height 50 mm Min. edge thickness 0.4 mm Max. edge thickness 8 mm Max. forward feed speed 11 m/min Top pressure yes Pressure with idle wheels Panel support guides yes No. Panel Sizing / Milling units 1 NO. PANEL SIZING / MILLING UNITS 1 Unit : pre-milling unit automatic timed intervention : yes motor power : 2.2 KW Edge coil magazine yes no. positions 1 Gluing system yes glue pot for EVA hot melt glue yes Roller set to press the edge yes No. Edge Processing Units 5 NO. EDGE PROCESSING UNITS 1 Processing Unit : end trimming Constructor model : HL 6130 no. motors : 2 motor power : 0.18 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 2 Processing Unit : fine trimming to trim  ...

Includes a loading table, a single-sided sizing and edge processing unit (KFL 23) lengthwise/crosswise and a return unit. For sizing and edge processing of worktops, side panels and shelves in small batches up to batch size 1. Workpiece parameters: Length range: 300-4500mm for worktops, 250-2600mm for side panels/shelves, 250-3100mm for niche back panels. Width range: 240-1200mm, thickness range: 12-60mm. Workpiece weight: max. 50kg. Material: chipboard, MDF. Surfaces: Melamine, laminate, CPL 0.6-0.8mm. Documentation available.

Specifications / Technical Data S-720/T CNC-Fraesmaschine und Graviermaschine / Fraese With the T-variant of the High-Z CNC Fraes.-and engraving machine you acquire old-fashioned technology with the certain i-Tpuelchen in TUeV-certified quality (EMC). The High-Z/T CNC-Fraese is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. The high-Z/T CNC-Fraese achieves fantastic accuracy and an almost unmeasurable reverse play of about 0.01mm due to the ball's circulation spindles. At the same time, high travel speeds of up to 108mm/second ( 6500mm/ minute) can be achieved. This allows engraving and feeding speeds of up to approx. 4500mm/min and express ingesses up to approx. 7000mm/min. Here you can watch a video of empty journeys with the new High-Z/T. This series of mechanical engineering is just as applicable in the industrial sec ...

The CNC-controlled autogen/plasma cutting machine RUR 2500GP is a completely welded portal construction sizing without screwed connections with linear guides in the transverse axis and digital synchronization in the laeng axis. The HiFocus 280i plasma system is suitable for use in the sheet thickness range of 0.5 - 50 (70) mm. As a soft switch inverter, HiFocus 280i offers a fully electronic power source for the power range up to 280 A. The system provides the best cutting results in the field of laser-like cuts and offers a higher service life of the wear parts. Equipment: ? CNC control system Pierce-19 touchscreen ? Energy chains with cables and loops ? A motorized plasma torch with automatic initial setting and burner ? Pneumatic anti-collision system ? Plasma cutting unit HiFocus 280i for cutting structural steel with recommended material thickness of 0.5 - 50 mm, punching up  ...

Thank you for your interest in our gum extruder system we offer you as follows: many thanks for your interest on our new chewing gum extruder plant, please follow our offer find: AUTOMATIC EXTRUDING; ROLLING AND SCORING MACHINE 7 ´ ´ /. COMPLETE LINE for production of chewing gum sticks and Chiclets Manufacturer: WLS Type: Chewing gum Extrudier-, rolling and cutting machine gum extruder, rolling and cutting system Product: Chewing gum sticks and Chiclets Size (working width): 7 ´ ´ / 177mm other dimensions are possible on demand Type: WLS RAS 7 "with manual take-off Capacity: Approx stick gum. 200-250 kg / h / Chiclets approx. 250-350 kg / h Number of rolling stations: 4 Number of cutting stations: 2 Electrical: 400V 3 ph 7 "ROLLING AND SCORING MACHINE incl. EXTRUDER Conveyor belt is covered with powderin ...

McIntyre 200B Shear Available with or without a stand, this machine might look small but it has a big cutting capacity Small but powerful McIntyre's wide experience in hydraulic equipment manufacture has enabled us to build an 8” shear with a staggering cutting force. Although equipped with only a blade, the high shear force and wide tip to tip opening on the McIntyre 200B means that it can deal efficiently with a whole range of non- ferrous cleaning and sizing operations - in particular larger diameter electric cables and valves. In most cases - if your metal will fit into the jaw of the 200B, then this machine will cut it. Our company can provide this equipment with short delivery time.

McIntyre 500 CAT Shear The 500 CAT is designed for those needing just a bit more blade length without an equivalent increase in price. Versatile The 500 CAT gives customers just a bit more blade length without a big price increase. It is powerful enough to handle most non ferrous cleaning and sizing operations, and can also be fitted with an optional bracket enabling it to assist when processing catalytic converters. Long-lasting In common with all JMC shears, the 500 CAT has been designed and built to last. Blades are deep hardened for extended life, hardened chrome rod is used in the hydraulic ram, and components are all choiceed according to their quality over and above their price.

McIntyre 500 GT Shear The 500 GT is designed for those needing just a bit more blade length without an equivalent increase in price Versatile The 500 GT gives customers just a bit more blade length without a big price increase. It is powerful enough to handle most non-ferrous cleaning and sizing operations, and can also be fitted with an optional bracket enabling it to double up as a catalytic converter shear.

Sunnen EC3500, honing machine, also single stroke progressive honing, holes: 1,5 to 165mm dia., spindle motor 5.5HP, auto stone compensation, auto sizing available as option, like new - low hours (1530), More pics available, Under power in our warehouse. Test run possible., Mimu Machine Tools (Italy)

219mm x 15mm Nanjing API Pipe Plant Year: 2021, Pipe Diameter: 101mm – 219mm, Wall Thickness: 2.75mm – 15mm, Pipe Length :4.2m – 16m, Yield Strength: 63.4Kg/cm2 (max), Line Speed: 10 – 30 meters per minute, Direction: Right to Left, Continuous Operation with Accumulator, Approximate Annual Production: 127,000 ton / year. Coil Car, Uncoiler, Straightener, Shear & Welder, Horizontal Accumulator, Forming Mill with Universal Drives, Individual Gear Boxes, 1,000Kw High Frequency Welder, Outside and Inside Bead Removal with Scrap Winder, Ultrasonic Tester, Cooling Section (Air and Water), Sizing Mill with Universal Drives, Individual Gear Boxes, Turk Heads, Flying Rotary Cut Off Saw, Run Out Conveyor, Straightening Machine, End Facing Machine, Automatic Packaging Line, Tooling, Spare Parts

Without Extruder Complete Line for Pipes 63-140 mm Reifenhauser only 20.000 working Hour // very good condition consist of following elements ; 1. 2. Vacuum sizing tank Reifenhauser KKE-R 0125 nr. 70057 3. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 4. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 5. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 6. Pipe pulling device Reifenhauser A-R 0075 nr. 70059 7. Saw for Pipes Reifenhauser TSQ-R 0075 nr. 70060 8. Marking Machine Medek & Schorner FMS 2R-U nr. 758.45

Continuous plank gluing press Suitable for hardwood wood thickness: 11 to 45 mm. Max wood length 2600 mm Gluing bed length: 6 m. Cross-chain transport Angle transfer and loading in the press with side glue, PVAc glue press with bed 1.58 x 10 m., hot water heated, Bohqqiku Hydraulic unit with 15 kW, v-outlet saw cross saw with running Mechanization available for sizing Disrun Vakumm Stacking Device

Code: 0232 Brand: ALBERTI V. Model: DOOR / CN - Ce Standard CNC working centre for the complete machining of doors of any size or design - CE Standard The operating head is provided with different working units in order to allow all the door machining in one cycle only (i.e. sizing, squaring, aperture, lock groove, horizontal routings, hinges, anuba, etc.). Technical data: Working area : maximum panel dimensions mm 2500 x 1300 - minimum panel dimensions mm 350 x 140 Maximum panel thickness mm 60 Minimum panel thickness mm 12 N° 3 controlled axis Vertical router Hp 9 - ISO30 connection - rpm 18.000 Horizontal router Hp 4,5 , which can work on all 4 sides Horizontal router for locks Hp 2/3 - rpm 12.000/18.000 Tool stations fitted on the table n° 8 Vacuum pump with double-acting suction cups Working pressure bar 6/8 Suction hoods diameter 80-90 Machine overall dime ...

grinding diameter: 250 mm grinding length: 1000 mm centre height: 125 mm grinding wheel diameter: 500 mm grinding wheel width: 80 (100) mm bore: 203,2 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm workpiece spindle swivable +/-: 360 ° grinding head swivellable +/-: 0 ° grinding spindle speed: U/min : 0-9,99 mm/Ø : 0-9,99 mm/Ø table swivelabel +/-: 10 ° longitudinal feed of the table: mm table speeds: 0,02-6 m/min : 130 kg max. workpiece weight -without tailstock: 130 inkl. Spannung kg cross travel: 270 mm tailstock quill taper MT: 3 quill travel: 30 mm total power requirement: 5,5-7,5 kW weight of the machine ca.: 2,7 t dimensions of the machine ca.: m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the serv ...

This HAAS ST-15 lathe was manufactured in 2019. It is equipped with a hydraulic chuck sizing 210 mm and offers spindle speeds up to 4000 rpm, with driven tool speeds reaching 6000 rpm. The machine includes a 12-position BOT/VDI type tool head and features axis movements with X at 100 mm and Z at 406 mm. For more information about this lathe, please reach out to us.

Turning diameter: 170 mm Turning length: 0 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: 21 i-T MACH - ID 6098 Make:COLCHESTER Type:TORNADO A50 Control:Fanuc 21 i-T YOP:2000 Max. turning Ø 170 mm X-Axis       350 mm Z-Axis       210 mm Spindle bore     54 mm Speedrange         6000 Rpm Spindle power       5,5 kW ATC / revolver         12 x Vdi 30 Control       Fanuc 21 i-T Chip conveyor         Yes Large tooling package VDi 30 Bar feeder L = 1000 mm Dimensions Length      6.000 mm Width        2.100 mm Height       1.900 mm Weight       2.800 kg

32mm x 2mm Oto Mills HF Tube Mill Make: Oto Mills Year New: 2002 Tube Diameter 10mm – 32mm Wall Thickness: 0.7mm – 2mm Speed: 180 mpm Direction: R-L Coil Weight: 3 ton Entry Coil Car Mandrel Uncoiler Automatic End Joiner Vertical Accumulator Coil Straightener Forming Mill with 50Kw Motor & Drive Finn Passes with 35Kw Motor and Drive 300Kw Thermatool HF Welder Cooling Section Sizing Mill with 50Kw Motor & Drive Turk Head Stands Flying Cut-Off Saw Run Out Conveyor and End Table Tooling for Round and Profiles Electrics, Hydraulics, Controls

377mm x 12mm HF Pipe Mill Round Size: 165mm – 327mm, Square: 100mm – 300mm, Wall Thickness: 4mm – 12.7mm, Pipe Length: 6m – 12m, Coil ID: 610mm – 760mm, Coil OD: 1100mm – 2000mm, Coil Weight: 25ton, Strip Width: 400mm – 1200mm, Speed: 10 – 35 mpm. Entry Coil Car, Mandrel Uncoiler, Pinch Rolls, Coil Straightener, Horizontal Accumulator, Guiding. Rolls, Forming Mill with DC Drive, Welding Section, 800Kw High Frequency Welder, Water Cooling Section, Sizing Mill, Driven Turk-Heads, Flying Cut-Off, Run-Out Table. Electrics, Hydraulics, Controls

42mm W/E HF Tube Mill Make: Won Engineering (Korea) Year New: 2008 Diameter: 10mm – 42.7mm Square Sizes: 12mm x 12mm – 18mm x 18mm Pipe Length: 5m – 8m Line Speed: 120 meters per minute Dual Mandrel Uncoiler Cage Type Accumulator Forming Mill with 100Kw DC Drive 150Kw High Frequency Welder Cooling Section Sizing Mill with 100Kw DC Drive Flying Cut-Off Saw with 7.5Kw Motor Run Out Table Dumping Table Electrics, Hydraulics, Controls, Lots of Tooling

50mm x 4mm Oto Mills HF Tube Mill Make: Oto Mills Year New: 2003 Tube Diameter, 12.7mm – 51mm Wall Thickness: 0.8mm – 4mm Speed: 160 mpm Direction: L-R Coil Weight: 5 ton Entry Coil Car Double Mandrel Uncoiler Automatic End Joiner Vertical Accumulator Coil Straightener Forming Mill with 70Kw Motor & Drive Finn Passes with 45Kw Motor and Drive 300Kw Thermatool HF Welder Cooling Section Sizing Mill with 70Kw Motor & Drive Turk Head Stands Flying Cut-Off Saw Run Out Conveyor and End Table Tooling for Round and Profiles Electrics, Hydraulics, Controls

63mm x 3mm Oto Mills HF Tube Mill Make: Oto Mills, Model: 552, Tube Diameter: 10mm – 63.5mm, Material Thickness: 0.8mm – 3.2mm, Line Direction: Left to Right. 10,000Lb Double End Uncoiler & Coil Car, Automatic Coil Joiner, Vertical Accumulator, Coil Straightener, Forming, Fins, Sizing Sections, 70mm Shaft Diameter, Three (3) 100HP Motors and Drives, Coolant Section, 30Kw Thermatool HF Welder, Three (3) Turk Heads, Spare Rafted Stands, Run Out and End Tables, Tooling

76mm x 6mm Oto Mills HF Tube Mill Year New: 2005, Tube Diameter, 12mm – 76mm, Wall Thickness: 1mm – 6mm, Speed: 140 mpm , Direction: L-R, Coil Weight: 10 ton. Entry Coil Car, Double Mandrel Uncoiler, Automatic End Joiner, Vertical Accumulator, Coil Straightener, Forming Mill with 110Kw Motor & Drive, Finn Passes with 70Kw Motor and Drive, 300Kw Thermatool HF Welder, Cooling Section, Sizing Mill with 110Kw Motor & Drive, Turk Head Stands, Flying Cut-Off Saw, Run Out Conveyor and End Table, Tooling for Round and Profiles, Electrics, Hydraulics, Controls

8″ x .220″ GSI HF Tube Mill Year: 2000, Diameter: 1.5″-8″, Wall Thickness: .050″-.220″, Shaft Diameter: 125mm, Speed: 20-40 meters per minute, Coil Width: 148mm-990mm, Coil Weight: 5,000Lb, Product: Round, Square, Rectangular. Double Mandrel Uncoiler, Shear & End Welder, Cage Type Accumulator, Forming Mill with 210Kw DC Motor, 300Kw High Frequency Welder, Sizing Mill with 125Kw DC Motor, Two (2) Turk Heads, Flying Cut-Off Saw, Run-Out Table & Conveyor. Lots of Tooling, Electrics, Hydraulics, Controls

Without Extruder Complete Line for Pipes 63-140 mm Reifenhauser only 20.000 working Hour // very good condition consist of following elements ; 1. 2. Vacuum sizing tank Reifenhauser KKE-R 0125 nr. 70057 3. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 4. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 5. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 6. Pipe pulling device Reifenhauser A-R 0075 nr. 70059 7. Saw for Pipes Reifenhauser TSQ-R 0075 nr. 70060 8. Marking Machine Medek & Schorner FMS 2R-U nr. 758.45

Maker: MayungJin, Kore Welder: China Electric controller: Korea Year: 2005 Pipe diameters: 50-145mm Wall thickness: 1.5-6.5mm Line speed: 60m/min Welder capacity: 500kW Line direction: left to right Line consist of: -uncoiler leveller -shar welder -accumulator -pipe forming -pipe welding -pipe sizing -pipe cutting -run out table -pipe end facer There is list of tools available: 76.3; 77,4; 90; 106; 108; 116.9; 127.3; 137.5; To get more information about machine please contact our sales deparment

Electric forklift with palletizer NEW 80V 775Ah BATTERY + KRONOS 80V 100A CHARGER Manufacturer: LINDE Model: E30HL-1/600 Power supply: electric Side sizing, positioner Four-fork palletizer Date of manufacture: 2015 Odometer reading: 23699 h Load capacity: 3000 kg Weight: 4115 kg Lifting height: 3 260 mm Motor: 2 x 9 kW Used trolley, functional in good technical condition. After technical inspection by LINDE M.H. Polska

Oto Mills 127x5mm HF tube mill Make: Oto Mills (Italy) Year New: 1999 Tube Diameter: 38mm – 127mm Wall Thickness: 0.9mm – 5mm Speed: 100 meters per minute Direction: Right to Left Tooling: Round, Square, Rectangular Entry Coil Car Shear & End Welder Driven Pinch Rolls Coil Straightening Machine Pit Type Accumulator Forming Mill 250Kw Emedi High Frequency Welder 2-Roll Adjustable Welding Box Cooling Section Sizing Mill Four (4) Adjustable Turk Heads Cut – Off Type: Flying Saw Driven Exit & End Tables Electrics, Hydraulics, Controls, Lots of Tooling, Drawings & Manuals, Spare Parts Line is still installed but not operational. Possible to inspect