sir used for sale

C arc Siemens Siremobil ISO - C to give

was connected to Gildemeister GMC 20

Siemens combined fluoroscopy and X-ray system Sireskop SX with the following device components: generator Polydoros SX 65/80 tube OPTITOP 150/40/80 HC 0.6/1.0 digital image processing Fluorospot TOP Image intensifier 40 cm PACS integration DLR 2nd Workplace 3D3 ceiling tripod 2nd tube OPTITOP 150/40/80 HC 0.6/1.0 vertical stand Vertix complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless oth ...

Siemens AXIOM sire Skop SD with the following system components: Generator Polydoros SX 65 Tube Optitop 150/40/80 HC 0.6/1.0 digital image processing Fluorospot compact Image intensifier Sirecon 40-4 HDR 40 cm The sale is to resellers or distributors despite full functionality without warranty as "Used", EXW Freiberg, Saxony, Germany. You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, properly lashed and wrapped with stretch film and can be picked up immediately.

Spindle circle 165 mm Interface Gildemeister GM 16 AC

BV 17 cm, LIH, CRT double monitor, patient archive system

Siemens mobile C-arm Siremobil ISO-C with Tube SR 110 0.6 Image intensifier 23 cm Dual monitor (flat screen) on trolley • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg, Germany. It is packed on pallets, professionally lashed and wrapped in stretch film and can be picked up immediately • You buy the system in "IST" condition from the warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation, commissioning and configuration of the system or plant components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!

Siemens combined X-ray and fluoroscopy system Sireskop SX with the following device components: generator Polydoros SX 65 tube Opti 150/40/73 C 0.6/1.0 digital image processing Fluorospot H Image intensifier 33 cm complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the bu ...

Sirona Small X-ray / Intraoral Machine Heliodent Plus with Tube D 3507 0.4 • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg, Germany. It is packed on pallets, professionally lashed and wrapped in stretch film and can be picked up immediately • You buy the system in "IST" condition from the warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation, commissioning and configuration of the system or plant components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!

The SIP Sirius 7 is a high-precision fixed-bridge Coordinate Measuring Machine (CMM) designed for dimensional inspection and quality control in manufacturing environments. Sirius 7 is known for its robust construction and hydrostatic bearing system, ensuring smooth and accurate measurements. Key Specifications • Measuring Range: 1,000 mm × 1,000 mm × 800 mm (X × Y × Z) • Accuracy: ±4 µm (micrometers) • Repeatability: ±2 µm • Guide System: Hydrostatic bearings • Temperature Compensation: Yes • Control Type: Manual (standard), with options for digital or CNC control systems • Probe System: Typically equipped with Renishaw or similar touch-trigger probes • Software Compatibility: Compatible with various metrology software platforms, including PC-DMIS and others

VSG insulated glass and laminated glass pane production line used Manufacturer: LISEC Type: SIRI Year: 1996 The line includes glass grinding line, washing line, drying and gluing line for making laminated glass and insulated glass panes Total dimensions of the line approx. 24 x 3.5 x 3.1 m; Plant is dismantled Changes and errors in the technical data, specifications and prices as well as prior sale reserved.

Circuit breakers, motor protection switches, circuit breakers, circuit breakers, low-voltage networks, circuit breakers for transformer, generator and system protection, voltage releases -Siemens: Sirius motor protection switch 3RV2742-5GD10 -Voltage release: 3RV2902-1DBO -Dimensions: 170/95/H170 mm -Weight: 2.4 kg

Linear drive, linear gearbox, lifting gearbox, spindle drive, linear unit, linear guide, linear axis, linear actuator -Manufacturer: Sir, linear drive from Nilfisk BR 651 scrubber-dryer -Type: AO-01/M -Voltage: 24 VDC -Stroke: 80 mm -Speed: 51 mm/sec -Dimensions: 280/65/H130 mm -Weight: 0.8 kg

A compact Sirona laboratory scanner for the dental industry is available. Scanning method: 5-axis robotic arm, technology: digital stripe light projection with autofocus, accuracy: less than 12µm, machine dimensions X/Y/Z: approx. 480mm/740mm/460mm, weight: approx. 40kg. Accessories included. Documentation available. On-site inspection is possible.

VSG insulated glass and laminated glass pane production line used Manufacturer: LISEC Type: SIRI Year: 1996 max pane height approx. 230 cm Total dimensions of the line approx. 12 x 1.2 x 4.4 m; Plant is dismantled Changes and errors in the technical data, specifications and prices as well as prior sale reserved.

fully automatic circular saw, double-sided mitre - overhauled by the manufacturer - exhibition machine

Max. saw length: 5000 mm Max. saw blade diameter: 450 mm Automatic positioning of length and angle (90° or 45°) Moving roller conveyor Material support Minimum quantity spraying device

Semi-automatic vertical circular saw with double-sided mitre, saw blade DM 315 mm

Suitable for swing-top and Euro bottles. d=62-71 mm Maintained and cared for. Full stainless steel Partially insulated Rotating Self-Cleaning Spray Tubes Capacity: 8000 bph 8 rows Steam-heated 0.6 bar Length 7800 mm Width 2585 mm Height 3040 mm

x-travel: 6000 mm y-travel: 1200 mm z-travel: 2000 mm a-axis: 144 x 2,5 ° c-axis: 144 x 2,5 ° spindle turning speed - stepless: 187 - 4000 U/min spindle taper ISO: 50 spindle motor: 27 kW max. torque on the spindle: 1400 Nm feeds longditudinal/cross/vertical: 6000 mm/min rapid motion -longitudinal/cross/vertical: 15 m/min no. of tools in the magazine: 40 Stück control: HEIDENHAIN TNC 426 M total power requirement: 56,9 kW weight of the machine ca.: 27 t dimensions of the machine ca.: - m - CNC control HEIDENHAIN TNC 426 M - ATC for 40 tools (BT 50) - Indexable 2-axis milling head with 144 x 2.5° each - Internal coolant supply - Floor Plate 3500 x 2500mm - NC rotary table 1500 x 1500mm - Chip conveyor - Renishaw - Hydrostatics in x/y/z - Ball screws in x/y/z Coordinates - X=longitudinal / Y=transverse / Z=vertical The data for this ad was created with ModulMWS - the software solutio ...

Harland Sirius Mark 5 labeller Serial: J31878 2007, wrap around labeller, previously used for pots of tablets, belt dimensions 3500mm x 80mm, also has top mounted top labeller used for labelling the lids of pots, comes with Allen coder, HMI touch screen controls, 3Ph

saw blade diameter: 350 mm cutting diameter: 110 mm capacity 90 degrees: flat: 180 x 85 mm capacity 45 degrees: round: 105 mm capacity 45 degrees: flat: 130 x 85 mm capacity 60 degrees: round: 105 mm capacity 60 degrees: flat: 90 x 85 mm turning speeds: 9-18-36-74 U/min vice: max. 180 mm Control: IMET CNC total power requirement: 1.5 / 2.2 kW weight: 710 kg range L-W-H: 2000 x 1100 x 2000 mm Current new price approx. 25.000 euros Special price on request Circular saws are used to cut thin-walled tubes and profiles. Clean, precise cut edges are achieved with the circular saw. Fast sawing and easy miter adjustment are the advantages of the circular saw. Basically, you should also pay attention to the correct cooling of the materials. Cooling lubrication is essential for metallic materials. Cooling lubrication is not required for non-metallic materials such as plastic, brass or cast iron. ...

Siemens Sirius soft starter Type: 3RW3027-1BB04 Input voltage: 200-480 V AC, 50/60 Hz Control voltage: 24 V DC Rated current: 32.2 A Power: up to 15 kW at 400 V Function: Soft start for three-phase motors Weight: approx. 1.2 kg Condition: used, tested Country of origin: Germany Price without VAT per piece Piece 1

Please refer to Fig. 2 for technical data

Siemens SIRIUS soft starter Item number: 3RW3018-1BB04 Type: Sirius 3RW30 Control voltage: 24 V AC/DC Nominal voltage: 200-480 V AC, 50/60 Hz Rated current: 17.6 A Motor power: 4 kW (400 V) / 7.5 kW (230 V) Degree of protection: IP20 Weight: approx. 0.45 kg Condition: used, tested Price without VAT per piece Country of origin: Germany Piece 1

Please refer to Fig. 2 for technical data

FPT SIRIO-M Control: Heidenhain TNC 426 C Serial Number: LM0498020 Machine number: 1710799 CNC milling head automatically swivelling infinitely variable Spindle: ISO 50, 50 kW, up to 3000 rpm Hydrostatic Guides Travel (X/Y/Z): 4000 / 1200 / 2000 mm Table size: 5000 x 2000 mm Tool changer: 30-fold ATC (automatic)

Mag Schymanski Bottle Washing Type Sirio 7-10 is a powerful bottle washing machine for industrial bottling plants. It ensures effective internal and external cleaning of glass and PET bottles and meets the required hygiene standards before filling. Adjustable parameters, robust construction and easy maintenance make it a reliable solution for beverage production. Control range 3,600-8000 bph Machine design Stainless Steel Method of operation Continuous Max. bottle diameter 75 mm Max.Bottle Height 290 mm Bottles in machine 1,720 pieces Bottle cell carrier 172 Pieces Cell division 95 mm Chain Pitch 140 mm Power consumption 12.33 kW Fresh water verb. 2,300 ltr./hr at 1.5 bar Heat demand Hourly output x 14.01 = demandin Kcl. Curb weight 12,000 kg Full weight 19,000 kg Length 7,000 mm Width 2,095 mm Height 300 ...

Bottle washer MAG Sirio 8 3000-11000 bph Bottle size 0.2l – 1.0l built in 1990

Ovit Sirio TH120, thermal Processor

- with 2 cap conveyors (BVS 30x60 and MCA 28) - incl. cap control unit - 3 sets of format parts complete incl. screw conveyors 1x0.75 litre round Ø 75 mm, 1x1.0 litre round Ø 90 mm, 1 x 0.25 litre round Ø 57 mm   More then 300 machines new and second hand on our seema .de

This LVD Sirius 3015 PLUS was manufactured in 2015. A robust CO2 laser cutting machine, it includes an automatic nozzle changer and has logged 22,192 operating hours. The package comes complete with a laser source, cooler, extraction unit, and various wear parts including nozzles, lenses, and additional lens holders. If you are looking to get high-quality cutting capabilities consider the LVD Sirius 3015 PLUS machine we have for sale. Contact us for more information about this machine.

Manufacturer: FPT Model: SIRIO-M Type of Machine : Milling Machine Total power: 60 kW Spindle taper: ISO 50 Spindle speed: 310 to 5,000 rpm Find more here - / Contact us at -

Circuit breakers, motor protection switches, circuit breakers, circuit breakers, low-voltage networks, circuit breakers for transformer, generator and system protection, voltage releases -Manufacturer: Siemens, Sirius motor protection switch 3RV1742-5GD10 -Voltage release: N3RV1742 -Auxiliary switch: 3RV1901-1A/3RV1902-1DBO -Price: per piece -Number: 6 pieces -Dimensions: 170/95/H180 mm -Weight: 2.3 kg/piece

Circuit breakers, motor protection circuit breakers, power disconnectors, low-voltage networks, circuit breakers for transformer, generator and plant protection, voltage releases -Manufacturer: Siemens, Sirius motor protection switch type 3RV2011-0GA10 -Voltage release: GB 14048.2 -Number: 4 switches available -Price: per piece -Dimensions: 100/45/H100 mm -Weight: 0.3 kg/piece

Motor protection relays, relays, heating current monitoring, preheating for generators, contactors, semiconductor contactors, contactors, motor protection -Manufacturer: Siemens, Sirius 3R motor protection overload relay -Type: 3RU1116-1GB0 -Auxiliary switch: 3ZX1012-0RH11-1AA1 -Quantity: 1 available -Dimensions: 120/45/H70 mm -Weight: 0.3 kg

Overview The bottle washer Sirio 7 from the German manufacturer MAG was built in 1995. Maintenance was carried out regularly by MAG. The machine can be inspected and tested in person. Technical details  Capacity up to 7,000 bph Bottle cells for 1.0 liter bottles (smaller bottles can also be used, but additional insertion plates are required) Diameter of bottles: 78 - 90 mm Bottle height: 288 - 310 mm Bottle cells per row: 10 Dimensions (LxWxH): 7,880 mm x 3,045 mm x 3,325 mm Empty weight: 14,300 kg Full load weight: 25,600 kg Installed power: 20.85 kW Heating system: Steam 3 bar

Machine table: 300×250 mm sonotrode stroke: 100 mm machine/sonotrode height 0 – 400 mm generator power: 2000 Watt frequency: 20 kHz Serial: 2362 Estimated weight: 120 kg Approximate dimensions: 600x600x1000 mm Auction-ID: A7-44996-174

Sale with the following accessories: 1x C7 connection cable 1x Manual Auction-ID: A7-45172-25