136,420 used machines on RESALE, but how to find them? Machine Search
Horizontal turning machine manufactured in 2022. This Optimum OptiTurn TH 8030D features a maximum swing diameter of 800 mm and a turning length of 250 mm. It includes a robust spindle chuck and a rapid motion speed of 3800 mm/min. If you are looking to get high-quality turning capabilities, consider the Optimum OptiTurn TH 8030D machine we have for sale. Contact us for further details regarding this machine.
This 5-axis Breton Matrix WM 800 K25 was manufactured in 2003. It features a substantial table dimension of 2000 x 3000 mm and impressive axes strokes of 2000 mm in X, 2500 mm in Y, and 800 mm in Z. The machine has a maximum rotation speed of 24000 rpm and a rapid forward speed of 40 m/min. If you are looking to get high-quality milling capabilities, consider the Breton Matrix WM 800 K25 gantry milling machine we have for sale. Contact us for further details.
Transnorm conveyor belt with leading belt GF 4070+4430 -600-500 RA2052 Technical data: Conveyor length (NL): 8500 mm (4070 mm + 4430 mm) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor and overdrive from belt one to belt two Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 8500 ( 4070 + 4430 ) Nominal / outside width in mm: 600 Belt ...
This Krauss Maffei 1000-8000 M hydraulic injection moulding machine was manufactured in 1997. The system offers an optional REMAK RE-CNC 6-axis robot with a maximum X-axis travel of 1000 mm, Y-axis travel of 1400 mm, and Z-axis travel of 3500 mm. The machine includes an injection pressure limit of 185 bar and a metering stroke of approximately 465 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 1000-8000 M machine we have for sale. Contact us for further details.
Cooling tunnel for chocolate enrobing machine, Sollich, type KS 820
This Krauss Maffei KM 800-6100MX was manufactured in 2007. It features a clamping force of 8000 kN and an injection volume of 2695 cm³, making it suitable for various materials such as PA, PP, PE, and ABS. The machine is equipped with a Wittmann Robot System for enhanced handling capabilities. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei KM 800-6100MX hydraulic injection moulding machine we have for sale. Contact us for further details.
Hydraulic injection moulding machine manufactured in 2003. This Engel DUO 5550/800 features a clamping force of approximately 800 tons and a screw diameter of about 90 mm. It has a shot volume of around 2700 cm³ and a maximum injection pressure of approximately 1900 bar. If you are looking to get high-quality injection moulding capabilities, consider the Engel DUO 5550/800 machine we have for sale. Contact us for further details.
Three old Hermle and Deckel milling machines are available. 1) Horizontal milling machine Hermle FW 801, tool holder: SK40, travel X/Y/Z: 430mm/150mm/420mm, speed: 2000rpm, machine dimensions X/Y/Z: approx. 2250mm/1700mm/1500mm, weight: approx. 1000kg. 2) Universal milling machine Hermle FW 710, tool holder: SK30, table dimensions X/Y: 710mm/190mm, travel X/Y/Z: 400mm/150mm/350mm, speed: 2240rpm, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1800mm, weight: approx. 700kg. 3) Deckel FP 2, year of manufacture: 1987, tool holder: SK40, travel X/Y/Z: 300mm/2200mm/400mm, table dimensions X/Y: 620mm/390mm, max. table load: 250kg, speed: 3150rpm, feed: 3600mm/min, rapid traverse: 4000mm/min, machine dimensions X/Y/Z: approx. 2500mm/2100mm/1800mm, weight: approx. 1250kg, control: Heidenhain TNC 355. An on-site inspection is possible. Individual sale possible, however a package sale is preferre ...
PROTEIN MACHINE TYPE MICROPLATE READER BIO-TEK 800 TS Absorbance Reader with Gen5RC 1 Unit Detection modes: Absorbance Microplate types:6- to 384-well plates Temperature control: To 50 °C (I” configuration) Read speed:11 secs /96 wells (sweep mode) Brand: BioTek With Computer UPS 1.0KVA CONTACT INFORMATION (Ms) Supawadee Kumpone - Toy Manager, Procurement Mobile#: +6693-7478585 Email: supawadeegreatglove.com (Ms) Wilawan Sakulsongboonsiri Mobile#: +6689-1969222 Email: wilawan_sakultopglove.com
automatic edgebander machine OCMAC SHF 800 second hand machine machine ideal for solid wood edges up to 30 mm thick with 4 sanding units machine composition: 1.gluing group with glue tank 2.pressure rollers 3.edge feeder 4. Dual-motor end trimming units 5. Dual-motor trimming units 6. Dual-motor edge trimming units 7. Spindle moulder n.4 sanding units cabin machine machine length approx. 900 cm
Capacity: 80 ton Throat depth: 280 mm Ram stroke: 8 - 140 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 520 mm Table surface area : 850 x 670 mm Slide area: 550 x 400 mm Hole in table: 250 x 180 mm Number of strokes: 20 - 100 s.p.m. Required power: 7,5 kW Dimensions L x W x H: 2210 x 1510 x 2750 mm Oil volume: 50 l Die weight at the ram max.: 300 kg Weight of machine approx.: 8,3 ton
A beader, flanging and beading machine for cans by Metal Box Company is available. Can type: 3-piece cans, can shape: round, tool diameter: 150mm, max. can height: 180mm, performance range: 70-280cans/min. An on-site inspection is possible.
Cambio 800D, 6 Arm AirTen, built in 2018. Well preserved Cambio 800 with 6 x direct drive, latest current model! 90 kW rotor drive! Each individual spiked roller is driven by 4.0 kW each. AirTen rotor with 6 tools. Feed up to max. 120 m/min possible. To sell on behalf of a customer. Machine can be viewed at any time.
Inv. Num. : 9105 Type: MIKRON VCE 800 PRO Producer: Agie Charmilles Created: 2011 Parameters: Control system: HEIDENHAIN iTNC 530 Work table length: 910 mm Work table width: 500 mm Maximum table load (uniform): 1100 kg Maximum vertical spindle speed: 10000 1/min X-axis travel: 800 mm Y-axis travel: 500 mm Z-axis travel: 540 mm Machine weight: 5000 kg
Manufacturer: Engel Model: Victory 330H/80L/110 Year of Manufacture: 2008 Type of Machine : Injection Molding Machinebi machine for 2-component injection molding (main cylinder is Ø 18mm thermoplastic and L-unit is a Ø 12mm LSR cylinder) Operating hours: 35995h Find more here - .ucymachines/ Contact us at - sales@ucymachines
- banding machine - Standard Version - with the existing accessories
Press capacity: 80 ton Ram stroke adjustable: 4 -60 mm Slide adjustment: 0 - 80 mm Shut height (stroke down, adjustment up): 310 mm Free frontal opening L-R: 800 mm Table height over floor: 1150 mm Table surface area : 780 x 640 mm Slide area: 800 x 460 mm Hole in table: 690 x 170 mm Number of strokes: 30 - 300 s.p.m. Required power: 21 kW Height over floor approx.: 2900 mm Weight of machine approx.: 12 ton Control: Siemens S5
A surface grinding machine is offered. Horizontal grinding spindle, ball-bearing mounted, dual system, hydraulic: infinitely variable table speed, manual: handwheels for individual parts and fine adjustment, flat or V-guides. Inspection possible by appointment.
Transnorm Rising falling Incline belt conveyor with leading belt GF 800+4650+560-600-500 RA2494 Technical data: Conveyor length (NL): 6100 mm ( 560 mm arch + 4650 mm riser segment + 800 mm leading ) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, R17DT71D4/BMG/TH Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2008 condition: good (used) Conveying length in mm: 6100 ( 8 ...
Key data: 2300 kN, 50 mm
SANDRETTO Serie 9 860/2300 Clamping Force: 230 T - 2300 kN Year : 2001 Distance Between tie bar: 585 x 585 mm Platen Dimensions: 860 x 860 mm Mold Thickness (Min/Max): 210 - 630 mm Opening Stroke: 580 mm Injection Volume: 475 cm³ Material Pressure: 1876 bar Screw Diameter: 50 mm Total Machine Power: 44.2 kW L/D Ratio: 20 Robot Interface: Euromap 12 Weight: 10,500 kg Dimensions: 6.25 x 2.28 x 2.1 m SEF 2000
x-travel: 600 mm y-travel: 450 mm z-travel: 400 mm table-size: 850 x 440 mm spindle taper: SK 40 control: HEIDENHAIN TNC 355 ATC: 32 Pos spindle turning speed range: 20 - 4000 U/min spindle drive: 5,9 kW quill stroke: 80 mm feeds longditudinal/cross/vertical: 1 - 2000 mm/min power feed x/y/z: 7200 N rapid traverse longitudinal and cross: 10 m/min rapid traverse vertical: 10 m/min total power requirement: 12 kW weight of the machine ca.: 3 t Acc.: NC-dividing unit (=4th axis) make WALTER with 3-jaw chuck 160 mmø, vertical head with hydr. tool clamping and quill retraction, solid table, various tool fixtures, electron. hand wheel, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Two-side evaporator Goedhart -Type: DVS-p-82637 -Cooling capacity: approx. 43 kW -Fin spinning: 7 mm -Fans: 2 x 630 mm -Dimensions: 2600 x 1820 x 750 mm -Volume: 76 L -Weight: 470 kg -Quantity in stock: 1 -Reference number: CH 604 -Condition: Used in good condition, evaporator 100% tight, fans working, ready to work
Evaporator Goedhart -Type: VRB 82457 -Cooling capacity: 20 kW -Fin spinning: 7 mm -Fans: 2 x 450 mm -Dimensions: 2060 x 900 x 750 mm -Stainless steel housing and block -Electric heating -Volume: 34 L -Weight: 200 kg -Quantity in stock: 1 -Reference number: CH 602 -Condition: Used in good condition, evaporator 100% tight, fans working, ready to work
General SKU043R200 LocationBarneveld MakeEngelsmann TypeMFL 85N/80-E1 Main Features Motor24 KW Inlet diameter300 mm Width150 mm Specified Features - Hammer Mill Hammer mill(1x) Rotor sizeDia. 300x150mm Fixed hammers(6x4) Motor24 KW, 380/660 Volt, Ex Speed2300 Rpm Hammer Mills MaterialStainless steel 2.4602 (Hastelloy C-22) General No.30223/88 Floor space1,7x0,7 m Total height1,2 m Weight800 KgHammer MillsCatalysts & fillersFeed additivesDiscountOrganicsE-waste & metalAnimal feedOther feedDyes & pigmentsPlastic & rubberMinerals & inorganicConsumer wasteEngelsmannMills > Hammer MillsIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed additivesDiscountIndustries > Recycling > OrganicsIndustries > Recycling > E-waste & metalIndustries > Food & Feed > Animal feedIndustries > Food & Feed > Other feedIndustries > Chemical > Dyes & pigmentsIndustries ...
Evaporator Goedhart -Type: SRU 81507 -Cooling capacity: approx. 15 kW -Fin spinning: 7 mm -Fans: 1 x 500 mm -Dimensions: 1460 x 930 x 840 mm -Stainless steel housing and block -Electric defrost -Volume: 23 L -Weight: 140 kg -Quantity in stock: 2 -Reference number: CH 600 -Condition: Used in good condition, evaporator 100% tight, fans working, ready to work
Transnorm Rising falling Incline belt conveyor with leading belt GF 800+1275+1005-700-600 RA2499 Technical data: Conveyor length (NL): 2980 mm ( 830 +150 mm arch + 1200 mm riser segment + 800 mm leading ) frame width (NB): 700 mm, 900 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 2980 ( 800 + 1275 + 1005 ) Nominal / outside ...
Key data: 8000 kN, 105 mm
Model: KM 800-6100 MX Year: 2006 Clamping force: 800 T Screw Diameter: 105 mm Operating Hours: 73,100 Robot : Sepro S3 Robot Year : 2006 Mold thickness (Mini/maxi) : 500 x 1100 mm Maximum injection pressure : 1469 bar Maximum distance between clamping plates : 2100 mm Dimension of the clamping plate horizontally : 1600 mm Clamping plate dimension vertical : 1530 mm Injection Volume : 4113 cm³ Injectable Weight : 3743 g Video : Yes
Key data: 8000 kN, 95 mm
Model: KM 800-6100 MX Year: 2008 Clamping force: 800 T Screw Diameter: 95 mm Operating Hours: 64,700 Robot: Sepro S3 Robot Year: 2008 Mold thickness (Mini/maxi) : 500 x 1100mm Maximum injection pressure: 1795bar Maximum distance between clamping plates: 2100mm Dimension of the clamping plate horizontally : 1600mm Clamping plate dimension vertical : 1530mm Injection Volume: 3367 cm³ Injectable Weight: 3064 g Video: Yes
BEKUM BA52 Blow Molding machine Type : BA 52 / S 801 Year: 1993 1 station Clamping force : 450 kN Original BEKUM control Extruder type : S 701 Refurbished 6-liter head with accumulator Head and screws reconstructed Max.bottle volume: 60 Litres Mold dimensions (L x W x H): 1200/750/2 x 150-300 (mm)
Mounting plate, scribing plate, measuring plate, measuring table, leveling plate, scribing plate -Clamping plate: Scribing and marking plate -Length: 800 mm -Width: 800 mm -Height: 128 mm -Sheet thickness: 23 mm -Quantity: 1 mounting plate available -Price: per piece -Transport dimensions: 800/800/H128 mm -Weight: 136 kg
Offer 26127 Technical data approx.: - Load capacity approx. 3000 kg - Loading area between side stanchions L 4.00 x D 0.94 m - Loading area without. Side stanchions L 4.00 x D 1.04 m - Loading height approx. 0.7 m - Stake height 0.5 m - Drawbar length 1.1 mm - Length with drawbar approx. 5.9 m - Drawbar can be mounted on both sides - Width approx. 1.1 m - Weight approx. 450 kg - Tyres air 460 x 140
Sartorius Certomat BS-1 50mm Heated and Refrigerated Incubator Orbital Shaker 8865329 50 mm Orbital stirring mode: 50 mm diameter Stirring speed: 40 to 400 rpm Max. accuracy ±1% of the final value Incubation temperature: –10 °C to +70 °C External dimensions: 1150 x 720 x 770 mm Internal dimensions: 890 x 495 x 650 mm Weight: 198 kg Steel construction, stainless steel interior Brushless motor, triple eccentric drive with adjustable mass compensation Tray 800 x 420mm Max. load 20 kg, mass compensation depending on load Stacking Up to 3 units, without speed reduction Protection IP21 Electrical specifications Connection Class l cold socket, separate cable approx. 3 m Protection class l 230 V Heating capacity 650 W Cooling capacity 500 W In excellent working condition
NEVER USED Specifications Manufacturer: Siemens Type: 8DH10 Voltage: 12 kV Rated current: 630 A Frequency: 50 Hz Short-circuit rating: 20 kA / 1 s Insulation: SF₆ gas insulated Year of manufacture: 2008 Standard: IEC 60265-1 / 62271 Features Compact medium voltage switchgear Hermetically sealed pressure system Integrated circuit breaker and earthing switch Suitable for transformer substations, industrial distribution and utility applications Made in Germany The units are visually in clean condition and available as shown in the pictures. Suitable for: Medium voltage distribution Transformer protection Ring main units (RMU) Industrial and utility power systems Contact for pricing, availability and additional information. GAS POWER HOLLAND
Edge milling machine, edge milling device, chamfering machine, mobile milling machine, weld edge former, weld edge former, weld preparation, weld edge forming machine, deburring device, deburring machine -Edge milling machine: with adjustable speed -Depth adjustment: 0 - 7 mm -Drive: 0.75 kW -Adjustable speed: 0 - 6000 rpm -Angle: 45° -Accessories: Widia milling head -Dimensions: 650/560/H1190 mm -Weight: 94 kg
amount of capping heads: 6 capacity / hour ca.: 10000 type of closures: 28 x 15 working direction: right-left (CCW) cap sorting system: Vibrating container weight [kg.]: 1,5
Machine, and good Condition Inspektion in our warehouse
MIKRON VCP 800W Duro CNC vertical machining center was built in 2004 in Switzerland by Mikron Comp-Tec AG. The machine is designed for precise machining of steel, aluminium and the production of moulds and tools. The machining process is performed by means of a reliable spindle and precision cutting tools. The spindle, driven by a powerful motor, rotates at a maximum speed of as much as 20000 rpm, ensuring rapid machining while maintaining high efficiency at the same time. Inside the fully illuminated workspace, there is also a large work table with T-slots for easy workpiece and tooling mounting. All this is complemented by an advanced HEIDENHAIN iTNC 530 CNC control with an intuitive interface and an access to many advanced functions. The MIKRON VCP CNC machining center weighs 9120 kg. The MIKRON VCP 800W Duro is offered with an extensive range of equipment, including, among others, ...
Key data: 800 mm, 500 mm, 610 mm
JOHNFORD VMC-850 Vertical machining center GENERAL Project No.: 906006 Quantity: 1 pcs. Manufacturer: JOHNFORD Type: VMC-850 Control: Fanuc 0 M Year of Make: 1999 Condition: Used machine Layers Machine Approx (Hrs): 1-2 Layers DESCRIPTION MILLING Travel in X 800 mm Travel in Y 500 mm Travel in Z 610 mm Max. rapid traverse speed in X/Y/Z 30/30/20 m/min Tool holder BT 40 Max. speed milling spindle 8000 1/min Spindle diameter in the front bearing 65 mm Disc tool magazine 24 stations Max. tool diameter 100 mm Max. tool length 200 mm Max. tool weight 10 kg Max. workpiece weight 400 kg Table size 1000x500 mm OTHER EQUIPMENT Splash protection cladding with fully encapsulated working area Lighting in the work area Chip conveyor Coolant Setup GENERAL TECHNICAL DATA Machine dimensions (LxWxH) approx. 2350x3200 mm Machine weight approx. 5500 k ...
DOOSAN VCF 850 LSR II is a multi-purpose, vertical machining centers suitable for a wide range of applications. 1993 working hours (like new)
Edge banding machine Brandt type KDF 890 Technical data: - Description: see machine photos
Clamping force: 2000kN, locking force: 2200kN, max. opening stroke: 570mm, min. mould installation height: 310mm, max. mould installation height: 660mm, max. distance between mould platens: 1230mm, mould platen dimensions: 830x830mm, distance between tie bars: 560x560mm, max. mould weight: 3.3t, max. weight on moving mould platen: 1.7t, max. weight on fixed mould platen: 2.5t, ejector stroke: 180mm, ejector force: 69kN, ejector return force: 31kN, screw diameter: 45mm, L/D ratio: 20, injection pressure at 400°C: 2402bar, shot volume: 358cm³, shot weight (PS): 330g, max. metering stroke: 225mm, max. nozzle stroke: 400mm, nozzle immersion depth (SVO): 20mm, nozzle contact force: 80kN, installed barrel heating capacity: 13kW, material hopper capacity: 70l, oil tank capacity: 500l, screw drive: 32kW, clamping unit drive: 32kW, pump unit power: 15kW, total installed power: 92kW, continuous ...
The machine is in good technical condition, after prior agreement it is possible to test it. Number of controlled axes: 3 Cast iron structure, prismatic guide surfaces Spindle taper: ISO 40 Max. speed 8000 rpm Power (continuous/30min): 7.5/11kW 2 gears Table dimensions: 1050x600mm Max. workpiece weight: 850kg X/Y/Z axis strokes: 850/600/600mm Tool change: 24pcs.
x-travel: 800 mm y-travel: 600 mm z-travel: 500 mm control: Heidenhain iTNC 530 total power requirement: kW weight of the machine ca.: 8300 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Water connection: 1/2 inch RG, water pressure: 0.7-6bar, water connection temperature: 50°C, drain diameter: 40mm, wash tank capacity: 95l, wash water temperature: 60°C, wash pump power: 2kW, wash pump capacity: 600l/min, wash pressure in the nozzles: 1.4bar, rinse tank capacity: 13l, rinse water temperature: 85°C, rinse pump power: 0.37kW, rinse pump capacity: 350l/min, rinse pressure in nozzles with rinse pump: 0.8bar, wash programs: 2, 4 and 6min, washing volume: 635x690x610mm, noise level: 70dB(A), water consumption per wash cycle: approx. 6l, heating element power: 2x 6kW + 1x 4.5kW, fuse protection: 32A, working height: 906mm, internal opening dimension: 508.5mm, length: 1265mm, width: 805mm, height opened: 2030mm, net weight without water: 225kg, gross weight without water: 250kg. An on-site inspection is possible, without power.
Offered is a 3D coordinate measuring machine. Working area X/Y/Z: 850mm/1200mm/600mm, probe holder: Renishaw PH10M, table surface: granite plate, resolution: 0.1µm, air supply: 5bar, control: Zeiss CMM Controller. Equipped with control panel with joystick, SCR200 probe change magazine, calibration sphere, extensive probe accessories. Weight: approx. 2400kg, overall dimensions X/Y/Z: approx. 2100mm/1900mm/2350mm. Inspection possible by arrangement.
Three identical transport vehicles available, year of manufacture: 2x 2021, 1x 2023. An on-site inspection is possible.
Seed station Kemper 800 mm Year of Make: 2001 Condition: repaired Suitable for integration into production lines up to 800 mm working width Standalone machine with its own control cabinet Adjustable spreading speed Adjustable spreading time Return belt for unused seeds Extendable mesh belt Humidification and sowing can be switched off Printing rollers at the infeed and outfeed with adjustable print height Turning station after humidification Incl. 1x spreading container and 1x extendable mesh belt
maximum number of results exceeded
please refine your search
