sip 8 used for sale

Impulse Pumps proudly presents the SIP 200-8HP, an exceptional addition to our esteemed SIP-series range. This pumpset is meticulously engineered to provide unparalleled pumping capabilities, especially when it comes to handling higher discharge heads. With the SIP 200-8HP, you can experience enhanced performance and conquer even the most challenging pumping tasks with ease., , Equipped with a robust JCB 448 diesel engine, the SIP 200-8HP delivers outstanding power and reliability. This engine, combined with Impulse’s cutting-edge technology, ensures optimal performance even under demanding conditions. You can trust our pumpset to meet the highest emission regulations while prioritizing safety, empowering you to operate efficiently and confidently., , Navigating complex equipment is a thing of the past. The user-friendly Ecomizer-Pro pump controller by Impulse provides real-time insigh ...

Pump is new and unused, assembled by manufacturer, , The SIP-series Screw Impeller Pumps are the do it all” pumps and have become very popular to use in all kinds of wet-construction works. It was just this set-up that has become the middle-man” between the very big market of hi-fuel consuming centrifugal dewatering pumps compared with the very specialized market of super-efficient low-fuel consuming piston pumps. Our 4-inch SIP 100-4 pump set was specially developed to be able to run successfully and efficiently on well-point dewatering without losing its flow while pumping a mixture of water and air. Designed and desired to excel in a wide range of works, our entire range of SIP-series centrifugal pumps handle today’s tough job site conditions. – Impressive solid handling capabilities make them ideal for wastewater, sewerage, mud, and so many more applications you can’t even ...

SIPA Band Saw Model 800 TOP made of steel: - upper spoke flywheel, full lower flywheel - Motor 4 kW / 5.5 HP, 380 volts - with upper and lower blade guide - tilting table

Gyro, capsule, rotary piston and sine pumps HILGE, FRISTAM, MASO, KSB and others Stainless steel pumps in various designs and sizes

X axis travel 1000 mm Y axis travel 700 mm Spindle travel 300 mm Table dimension 1.100x842 mm Spindle speed 40-2000 rpm Max power input 10 kW Spindle motor 8 HP Total permissible load on worktable 1 ton Machine approximate weight 15 ton

Both filling stations are in good condition, little in use.

CONVEYOR STATION LORANDI / OLI / SIPA 30/15

The SIP Sirius 7 is a high-precision fixed-bridge Coordinate Measuring Machine (CMM) designed for dimensional inspection and quality control in manufacturing environments. Sirius 7 is known for its robust construction and hydrostatic bearing system, ensuring smooth and accurate measurements. Key Specifications • Measuring Range: 1,000 mm × 1,000 mm × 800 mm (X × Y × Z) • Accuracy: ±4 µm (micrometers) • Repeatability: ±2 µm • Guide System: Hydrostatic bearings • Temperature Compensation: Yes • Control Type: Manual (standard), with options for digital or CNC control systems • Probe System: Typically equipped with Renishaw or similar touch-trigger probes • Software Compatibility: Compatible with various metrology software platforms, including PC-DMIS and others

Used blow moulding machine made by SIPA model SFR24. New 2007. It has 24 blow stations. The maximum blow speed is 38,000 bottles per hour for the 1.75 l format and 41,000 bottles per hour for the 1.5 l, 1.25 l, 1.0 l and 0.7 l formats. The device has an air recovery system and linear optical control for testing the quality of preforms. Supported thread type: PCO 1881. The blow moulding machine has an integrated control system with visualisation in Polish, English and Italian. A complete set of documentation is included with the blow moulding machine. The blow moulding machine includes: an automatic air-cooled chiller for supplying the machine with cooling water, an automatic preform feeder, an automatic preform basket tipper and a bottle ejector mounted on an air conveyor.

spindle diameter: 135 mm x-travel: 1000 mm distance between columns: 1000 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 135 mm x-travel: 1000 mm y-travel: 795 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Process controller, controller, temperature controller, temperature sensor, setting for temperature -Type: SIPART DR24 -Price: per piece -Number: 1x available -Weight: 1.5 kg

Inv. Num. : 8054 Type: HYDROPTIC 6 Producer: SIP Generated: Parameters: Work table length: 1100 mm Work table width: 842 mm Maximum spindle speed: 2000 1/min Maximum table load (even): 1000 kg X-axis travel: 1000 mm Y-axis travel: 700 mm Z-axis travel: 800 mm Spindle power: 6 kW Machine height: 3205 mm Machine length: 3280 mm Machine width: 2335 mm Machine weight: 10000 kg

spindle diameter: mm x-travel: mm distance between columns: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1997 Reconditioned 04.2003 Find more here - / Contact us at -

total power requirement:16,5 kW weight of the machine ca.:3,8 t

internal diameter: 800 mm grinding depth: 500 mm swing diameter: 850 mm total power requirement: kW weight of the machine ca.: 6,4 t dimensions of the machine ca.: m Used internal cylindrical grinding machine with face grinding device in special design with enlarged swing diameter and extended, hydraulic transverse movement Reconstructed and modernized 1995 in the Glauchau manufacturer’s plant, put into operation 1996 1. TECHNICAL DATA 1.1 Working area Grinding diameter in the workpiece guard internal grinding, min./max. mm 30/630(800) External grinding, max. mm 800 Grinding depth, up to approx. mm 500 Table stroke mm 800 Workpiece diameter, max. mm 800 Swing diameter in workpiece protection, max. mm 800 Without workpiece protection, approx. mm 850 Distance from workpiece spindle head to grinding spindle carrier, max. mm 1225 Adjustment of the internal grinding device on the table, max ...

spindle diameter: 135 mm x-travel: 1000 mm y-travel: 700 mm z-travel: 300 mm cross rail adjustment - vertical: 780 mm distance between table/spindle: 1000 mm table surface area: 1100 x 842 mm distance between columns: 1100 mm table load: 1500 kg tool taper: SK 45 spindle turning speed range: 2400 U/min spindle drive: 5,9 kW feed range: 1 - 6000 mm/min weight of the machine ca.: 10,6 t dimensions of the machine ca.: m Retrofit / overhauling in May 2005 (with geometric measurement): - New Heidenhain iTNC-530 control - New electronics - New Siemens servomotors - Heidenhain glass scales - Revision of drilling spindle unit (total costs € 118,436.00) Equipment: Infrared measuring probe m&h 38.10-MINI Electron. Handwheel Various tool holders Transport dimensions: - Machine (LxWxH) 3500 x 2600 x 2750 mm - Control cabinet (LxWxH) 2300 x 600 x 2300 mm - Hydraulic (LxWxH) 800 x 600 x 1000 mm Th ...

spindle diameter: 110 mm x-travel: 900 mm y-travel: 600 mm z-axis: 200 mm table length: 1020 mm table width: 860 mm taper MK: 40 Table size, approx. 1,020 x 860 mm Max. weight of workpiece 800 kg Table travel, longitudinal, max. (X) 900 mm Boring head travel, cross, max. (Y) 600 mm Boring spindle stroke (Z) 200 mm Vertical travel of cross beam (W) 635 mm Vertical distance between table and boring spindle 15 - 850 mm Distance between columns 950 mm Spindle Ø 110 mm Spindle taper internal/external ISO 40 18 spindle speeds 10 - 2,500 rpm Milling feeds of table, infinitely variable 1 - 6,000 mm/min 4 milling feeds of boring head 30 - 180 mm/min 6 boring feeds 0.01 - 0.39 rpm Accuracy of all 3 axes when the machine was new 0.003 mm Quick feeds for table, boring head slide, and boring spindle, max. 6,000 mm/min Spindle drive 6.2 kW Weight, approx. 9,000 kg Total electrical load  ...

A total of four feeder trolleys are available for ASM/Siplace. Documentation available. On-site inspection is possible.

spindle diameter: 135 mm x-travel: 1000 mm distance between columns: mm y-travel: 700 mm bore capacity in steel: 60 mm spindle stroke: 300 mm spindle turning speed range: 40-2000 U/min table-size: 1100x842 mm cross rail - adjustment: 770 Vertikalweg mm spindle drive: 6 kW total power requirement: kW weight of the machine ca.: 12,5 t dimensions of the machine ca.: m with: - 2 axes digital display Newall - Rotoptic table - Swivelling rotary table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 120 mm centre height: 100 mm : Stirnschleifeinrichtung : Kein Typenschild auffindb The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We are pleased to offer for sale a Siemens SIPLACE SMT Machine Package, composed of the following equipment: ( tray units / accesories included ) 1.SIPLACE F5 HM Year of Manufacture: 2004-2006 Weight: 2,320 kg Technical Specifications - Operating Pressure: 5.5 – 8 bar - Air Flow: 300 Nl/min - Frequency: 50/60 Hz - Phases: 1:3 - Voltage: 230/400 V - Number of Wires: 3 wires per phase (3 x Ph) - Full-load Current: 3.3 A - Power Consumption: 1.8 kW - Circuit Protection: 3 x 16 A breakers - Max Motor Current (Rated): 16 A 2.WPW/3-900 Year of Manufacture: 2006 Weight: 230 kg Technical Specifications - Frequency: 50/60 Hz - Phases: 1:3 - Voltage: 230/400 V - Number of Wires: 3 wires per phase (3 x Ph) - Full-load Current: 0.7 A - Power Consumption: 0.4 kW - Circuit Protection: 3 x 6 A circuit breakers - Max Motor Current (Rated): 6 A 3.SIPLACE 80 S-15 HM Year of Manufacture: 1999 ...

Used Revised Sipa Rotary Blow Molding Machine 2008: A Comprehensive Overview Are you in the market for a reliable blow molding machine? Look no further than the used Sipa Rotary Blow Molding Machine 2008. In this article, we will delve into the details of this machine, exploring its features, specifications, and benefits. Whether you are a seasoned professional or just starting in the industry, this article will provide you with valuable insights into the Sipa SFR8. 1. Introduction Blow molding machines play a crucial role in the production of various plastic containers. The Sipa Rotary Blow Molding Machine 2008, also known as the SFR8, is a popular choice in the industry. It offers efficiency, precision, and versatility, making it an excellent investment for manufacturers. Let's explore its features in detail. 2. Overview of the Sipa Rotary Blow Molding Machine 2008 The Sipa Ro ...

Size: 470 x 660 mm Impression: 25 Mio. Equipments: Console DTC (Sakurai Delivery Top Console) with Touch Screen . Full Remote Control Operation : SIS (Sakurai Inter Active System) for make ready Plate Running Register system SAS (Sakurai Auto Set) for Paper size and thickness SPC (Semi-automatic Plate Change) Cocking Register Automatic Washers: Blanket Cylinders & Inking Rollers Olivermatic Dampening Baldwin Refrigeration System & Bal Control Feeder with Suction-belt feed table Electronic Double Sheet & Side lay Detector Chromed Impression Cylinders Perfector 4/0 - 2/2 (Full automatic) Semi-High Pile delivery Powder Sprays Including: Plate Punch, Compressor Tools and Manuals

Qty. 1 Second-hand PET complete filling line Mfc.: SIPA, Melegari, Dimac and ABB Built: 2005 - 2019 Products: CSD and Water, with or without CO2 Capacity: 12’000 bph in 950 and1500 ml PET Neck format PCO 1881 (short cap) Scope of supply: Blow Moulders Air Conveyors Filler Capper Monobloc Filling Level & Cap Inspector Labeller Shrink Wrapper Package Handel Applicator Palletiser Pallet Wrapper

Cup printing machines

General SKU345S668 LocationBarneveld MakeKrauss Maffei (D) TypeHZ 125/3.2 Si No.11437 Year of construction1994 Main Features MaterialStainless steel Motor55 KW Specified Features - Peeling centrifuge Peeler centrifugecheck Basket sizesDia:1250 x800mm Wall thickness20mm Max. loading weight498 Kg With hydraulic unit(controls) Motor55 kW 380 Volt (EEx de II c T4) With variable speed drivecheck Max. basket speed1220 rpm With scrapercheck MaterialStainless steel 1.4571 (316Ti) Information Mounted on foundation platecheck Floorspace4,5x2,3 M Total height2,7 M Weight7000 KG ATEX compatiblecheck Extra Specifications-Filter area 3,14m². -Discharge with feedscrew. Peeling centrifugesKrauss MaffeiCentrifuges > Peeling centrifugesBrand > Krauss Maffei What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shi ...

General SKU379W1582 LocationBarneveld MakeHilge TypeSipla-HT 18.1 adapta 50/50/4.0/4 Main Features MaterialStainless steel Volume5000 Ltr. Motor4 KW Specified Features - Centrifugal Pump MaterialStainless steel 1.4301 (304) Centrifugal Pumps Pumpcheck Number of pumps:1 Capacity5 m3/h With motor4,0 kW, 400/690 volt, 1440 rpm InletDN40 OutletDN40 Information Mach.No.30.10.10233 Mounted on framecheck Floorspace1,0x0,32 m CEcheck Total height0,40 m Weight50 kgCentrifugal PumpsHilgePumps > Centrifugal PumpsBrand > Hilge What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU379W1587 LocationBarneveld MakeHilge TypeSIPLA-HT 12.1 Adapta 40/40/2.2/4 Main Features MaterialStainless steel Volume10000 Ltr. Motor2.2 KW Specified Features - Centrifugal Pump MaterialStainless steel 1.4435(316L), Stainless steel 1.4571 (316Ti) Centrifugal Pumps Pumpcheck Number of pumps:1 Capacity10 m³/h With motor2,2 kW, 230/400 volt, 1420 rpm InletDN40 OutletDN40 Information Mach.No.30.08.10191 Floorspace0,85x0,30 m CEcheck Total height0,36 m Weight100 kgCentrifugal PumpsHilgePumps > Centrifugal PumpsBrand > Hilge What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

The SIP 150-6 screw impeller pump is designed and built to meet the needs and demands of much of the world without the need for advanced technologies. This mobile pump unit is the simplest and most basic version in our range of 6″ screw impeller pumps., The Budget configuration is a typical old-fashioned mechanical configuration, has a direct-drive vacuum pump with V-belt without electromagnetic clutch, so the vacuum pump always works even if the screw pump has water., This configuration has no level control, and the speed must be adjusted manually via the throttle lever on the engine., This pump is as basic as you could want... Start/Stop with a switch and the RPM has to be adjusted manually. Equipped with float switching though !, However, the pump unit is completely autonomous and equipped with all the elements that Impulse always offers., It is equipped with its own fuel tank and o ...

This Imulse SIP 100-4 dirty water pump is often used for sewer detour, dewatering, surface drainage and liquid transport. Operating the pump is extremely easy and is controlled by Impulses Ecomizer-Pro control system. This control system can analyze improper use and misuse of the pump, protecting itself from unnecessary wear costs and/or damage., , Some notable features:, - Running time on a full 200-liter tank: 220 hours on average, - Permeable solids: 80 mm, - Maximum capacity / maximum head: 135 m³/h / 22 meters, - Vacuum pump for priming: automatically shuts off once the pump is filled with water, , If you have any questions please feel free to contact us., , Throughput capacity: 135 m3/h, Max dirt passage: 80 mm, Motor brand: Hatz, Max. head: 22 MWK, Max dirt passage: 1800 rpm, Weight: 1700 kg, , = More information =, , General information, Year of manufacture: 2025, Applicable mat ...

SPECIFICATIONS: Chain operation Vertical Machining Voltage: 380 V

Offer 25521 Double-sided long goods – cantilever rack without contents Technical data: - 2-sided cantilever rack consisting of 10 uprights with plug-in system - Height-adjustable bearing arms - 130 bearing arms - Stand height approx. 6000 mm - Wide stands + support arms approx. 1600 mm - max. arm load approx. 400 kg - Max. drawbar load per support approx. 5000 kg - Center distance of the shelf parts connected to diagonals approx. 1.0 m - Grid spacing for the reg arm - Height adjustment 125 mm - Arm dimensions: L 700 x W 90 x H 70 mm - Stand dimensions W 220 x H 150 mm - Weight per post approx. 400 kg - Weight per arm approx. 10 kg

Blowing machine SIPA type SFR EVO3 capacity: 18.000 bph - 0,5 ltr., 1,0 ltr., 1,5 ltr. year of manufacturing: 2017 neck type: PCO 28 - 1810 with 8 cavities incl. preform feeding system incl. preform cooling system Min. - Max. bottle diameter (diagonal): 50 - 125 mm Min. - Max. bottle height (without neck): 80 - 349 mm without high pressure compressor The machine is still in production until the beginning of February 2026.

Hydraulic clamp couple for chair assembly CAMAM mod. SIPM - CE - Hydraulic pump power HP 5.5 (kW 4.0) - Productivity 60-120 assambled chairs/hour - Dimensions mm 3500x1300x2200 H - Weight kg 2060 - CE rules - Voltage: 380/50 - Year: 1998

Used Used PET Blower Sipa Sfr 16: Year: 2007 Condition: Good Used Pet Blower Sipa Year: 2007 Speed: 24.000 bph Model: sfr 16 Stamp included: 1.5 lt 16 cavities Machine overhauled in 2019 Compressor atlas copco Booster Safety protections. Code: W 36 More details: https://bottlingscout.com

Used Used Blow Moulding Machine Sipa sf 8/4: Year: 1998 Condition: Good Used Blow Moulding Machine Sipa sf 8/4: Year: 1998. Speed: 4.000 bph. Model: sf 8/4. 4 cavities. Format available: 0.5 lt ? 1.5 lt ? 2.0 lt. Preform loader. Preform tipper. Complete with air recovery system. Safety protections. Code: W 14 More details: https://bottlingscout.com

Used Used Blow Moulding Machine Sipa Sfr 16: Year: 2001 Condition: Good Used Blow Moulding Machine Sipa Sfr 16 : Year: 2001 Model: sfr 16 Speed: 18.000 bph on 1.5 lt 22.000 bph on 0.5 lt Number of cavities: 16 Preform elevator Preform orientator Safety protections Code: W 79 More details: https://bottlingscout.com

Used Used Blow Moulding Machine Sipa Sf-08004: Year: 1994 Condition: Good Used Blow Moulding Machine Sipa Sf-08004: Year: 1994 Speed: 4.000 bph Model: sf-08004 Number of cavities: 4 Type: linear Preform tipper Preform hopper Bottle formats: 1.5 lt Safety protections Code: W 86 More details: https://bottlingscout.com

Complete CSD PET Bottling Line – 12,400 BPH Manufactured: 2008–2009 | Location: Germany | Available: October 2026 This complete CSD (Carbonated Soft Drink) PET bottling line is designed for efficient and reliable production of carbonated beverages. The line is composed of high-quality European equipment from leading manufacturers such as SIPA, GEA Procomac, Arol, SMI, PE Labellers, Ventilo, Robopac, and TwinPak. The system is currently still in production, ensuring excellent operational condition and immediate demonstration possibilities. General Line Data Nominal Capacity: 12,400 bottles/hour Effective Capacity: approx. 10,000 bottles/hour Bottle Sizes: 0.5 L 0.75 L 1.5 L Bottle Type: Round PET bottles Cap Types Flat Cap: PCO 1881 Sport Cap: Aptar PCO 1881 Main Equipment Blow Molding Section Blow Molding Machine: SIPA – 8 cavity system Bottle Hand ...

Complete PET Bottle Filling Line for Carbonated Soft Drinks Manufacturer: SIPA / PROCOMAC Year of Manufacture: 2009 Location: Germany Availability: Beginning October 2026 The line is currently in operation and can be inspected during production. Technical Details: Capacity: Approx. 12,500 bottles per hour Bottle Sizes: 500 ml, 750 ml, 1,500 ml Neck Finish: PCO 28 / 1881 750 ml additionally with sport cap (PCO 1881) Equipment & Features: 1. Blowing machine SIPA SFR 8 with 8 cavities incl. preform feeding system, incl. chiller but without preform unloading device and without high pressure compressor 2. Air conveyor GEA Procomac 3. Tribloc GEA Procomac 50 / 70 / 12 with 50 rinsing stations, 70 filling valves and 12head plastic screw capper, incl. complete clain room around the machine type ISO 5”, incl. two sorting units, incl. bottle drying station after the filler, incl. ...

Used Blow Molding Machine SIPA SFR12 18000 bph General Features of the SIPA SFR12 Blow Molding Machine The Used Blow Molding Machine SIPA SFR12 18000 bph performs PET container stretch blow molding and SIPA manufactured it in 2007. As a result of its SFR12 configuration, which includes 12 cavities, the system reaches a nominal speed of 18,000 bottles per hour. Consequently, it delivers high production efficiency across multiple formats. Specifically, this machine processes volumes from 0.25 to 2 liters. Therefore, it fits seamlessly into high-speed bottling lines, particularly in the mineral water and soft drink industries. Moreover, thanks to its compact layout, it optimizes floor space usage. Preform Compatibility and Technical Specifications This machine processes preforms with 3-start Alaska neck finishes and supports weights ranging from 12 to 34 grams. In particular, operators can  ...

Used Sipa Blow Molding Machine 1994 We have a used Sipa blow molding machine from 1994 that is currently in storage. The machine is manufactured by Sipa and the model is Top 2000. The condition of the machine is not specified. It comes with safety features that are available for use, and there are manuals available to assist with operating and maintaining the machine. The machine is designed to produce containers made from PET material, and it can create containers in two formats: 0.50 L and 1.0 L. The machine has six cavities and features a preform loader. It’s not stated whether the machine comes with a preform tipper or unscrambler. Additionally, the machine comes equipped with a compressor and chiller. The preform neck type is compatible with a press cap closer. The machine has an air recovery system and is either a linear or rotary type. The machine’s measurements are as ...

Used Blow Molding Machine Sipa SFR 16 Assessment of Heating System and Preform Feeding Firstly, a comprehensive evaluation of the entire oven system is imperative, encompassing turning-over ramps and tension wheel guides, to ensure an efficient and seamless bottle forming process. Evaluation of Transfer Arms and Cams of the Sipa blower An indispensable aspect pertains to the scrutiny of transfer arms and cams. These components play a pivotal role in maintaining a continuous and uninterrupted production flow. Furthermore, meticulous inspection of their functionality is essential to uphold the quality and precision of the blow molding process. Condition of Molds and Stretching Mechanism Equal emphasis is placed on assessing the condition of molds and the stretching mechanism. The accuracy and integrity of the molds are pivotal in producing flawless, high-quality bottles. Consequently, cond ...

Technical Specifications & Performance Data The Sipa 8/4 is a compact, reliable Blow Molding Machine ideal for small-format PET bottle production within a used bottling line. Built for continuous duty in beverage production and industrial packaging environments, it combines proven mechanical design with essential utilities to support efficient operation. Manufacturer: Sipa Model: 8/4 Year of manufacture: 2001 Category: Blow Molding Machine Nominal output: up to 3,500 bph (bottles per hour) No. of cavities: 4 Bottle format: 0.06 L (60 ml) Primary container material: PET (preform-based stretch blow molding) Preform neck type: Corvaglia e 29/21 Included utilities: Compressor (1), Chiller (1) Not included: Preform unscrambler (0), Preforms tipper (0), Elevator (0), Air Recovery System (0) Condition: In storage Documentation: Manuals available Advanced Automation & Control Systems This second ...

Used SIPA blow molding machine 2017 - 18.000 bphTechnical Specifications & Performance DataThis SIPA SFR EVO3 is a rotary stretch blow molding machine designed for high-efficiency PET bottle production in modern beverage operations. As a robust second hand asset for industrial packaging, it delivers reliable output for beverage production lines seeking consistent quality and throughput. The machine features an 8-cavity configuration and supports a broad range of bottle sizes commonly used across water and soft drink applications.Manufacturer: SIPAModel: SFR EVO3Year of manufacture: 2017Production speed: up to 18,000 bottles per hourNo. of cavities: 8Neck finish: PCO 28-1810Bottle formats: Compatible with 0.5L, 1.0L, 1.5L bottle formatsContainer type: Designed for PET bottle handlingBottle diameter (min–max, diagonal): 50–125 mmBottle height (min–max, without neck): 80†...

Used Revised Sipa Rotary Blow Molding Machine 2008: A Comprehensive Overview Are you in the market for a reliable blow molding machine? Look no further than the used Sipa Rotary Blow Molding Machine 2008. In this article, we will delve into the details of this machine, exploring its features, specifications, and benefits. Whether you are a seasoned professional or just starting in the industry, this article will provide you with valuable insights into the Sipa SFR8. Table of Contents Introduction Overview of the Sipa Rotary Blow Molding Machine 2008 Features and Specifications Benefits of the Sipa SFR8 Applications Maintenance and Care Tips for Choosing a Used Machine Safety Features and Manuals Current State and Availability 1. Introduction Blow molding machines play a crucial role in the production of various plastic containers. The Sipa Rotary Blow Molding Machine 2008, also known as  ...

internal diameter:315 mm grinding depth:315 mm swing diameter:420 mm number of spindle speeds:32 - 360 U-min wheel box:-drehzahl 100 - 8000 U/min face diameter:500 mm total power requirement:12 kW weight of the machine ca.:5900 kg dimensions of the machine ca.:3400 x 1750 x 2000 mm

Spare welding controllers for resistance welding machines MPS 100mono MPS 100monoR1 MPS 100multi MPS 100multiR1