sip 8 used for sale

Manufacturer: Terex Finlay Model: 883 Year of Manufacture: 2010 Machine Type : Mobile heavy duty screener Operating hours: 8867 h Find more here - / Contact us at -

Manufacturer: Keyence Model: IM-8000 Type: Image Dimension Measurement System Software Version: B-13.0.0.28-11.07-20.07.09.01 / A2.05-A1.27-A3.03-9B.06-9B.06-02.01-03.02 Sensor: 20-megapixel CMOS Stage Size: 300 x 200 mm Measurement Capacity: Up to 300 features in a single measurement cycle Condition: Used, fully functional Find more here - / Contact us at -

Pressure total: 800 ton Ram stroke: 700 mm Slide adjustment: 600 mm Shut height (stroke down, adjustment up): 1475 mm Free frontal opening L-R: 3700 mm Free lateral opening F-B: 2300 mm Table surface area : 3600 x 2200 mm Slide area: 3500 x 2070 mm Die cushion capacity in table: 150 ton Die cushion stroke: 250 mm Die cushion pad area: 2780 x 1570 mm Ejector in ram: 60 ton Ejector stroke in ram: 150 mm Number of strokes: 7 - 21 s.p.m. Required power: kW Height over floor approx.: 9510 mm Weight of machine approx.: 260 ton

pressure: 800 t distance between columns: 3160 mm stroke: 1100 mm control: Siemens S5 distance table/blankh.,max. stroke up,adjustm. up: 1900 mm table surface area: 3100 x 1900 mm die-cushion pressure inside the table: 300 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 80 t stroke of drawing cushion in table: 150 mm ram surface: 3100 x 1900 mm die-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: 200 kW weight of the machine ca.: 150 t dimensions of the machine ca.: 4,95 x 3,3 x 10,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 800 t distance between columns: 3160 mm stroke: 1100 mm control: Siemens S5 distance table/blankh.,max. stroke up,adjustm. up: 1900 mm table surface area: 3100 x 1900 mm die-cushion pressure inside the table: 300 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 80 t stroke of drawing cushion in table: 150 mm ram surface: 3100 x 1900 mm die-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: 200 kW weight of the machine ca.: 150 t dimensions of the machine ca.: 4,95 x 3,3 x 10,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 800 t distance between columns: 3160 mm stroke: 1100 mm distance table/blankh.,max. stroke up,adjustm. up: 1900 mm table surface area: 3100 x 1900 mm die-cushion pressure inside the table: 300 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 80 t stroke of drawing cushion in table: 150 mm ram surface: 3100 x 1900 mm die-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 800 t distance between columns: 3160 mm stroke: 1100 mm control: Siemens S5 distance table/blankh.,max. stroke up,adjustm. up: 1900 mm table surface area: 3100 x 1900 mm die-cushion pressure inside the table: 300 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 80 t stroke of drawing cushion in table: 150 mm ram surface: 3100 x 1900 mm die-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: 200 kW weight of the machine ca.: 150 t dimensions of the machine ca.: 4,95 x 3,3 x 10,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 800 t distance between columns: 3160 mm stroke: 1100 mm control: Siemens S5 distance table/blankh.,max. stroke up,adjustm. up: 1900 mm table surface area: 3100 x 1900 mm die-cushion pressure inside the table: 300 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 80 t stroke of drawing cushion in table: 150 mm ram surface: 3100 x 1900 mm die-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: 200 kW weight of the machine ca.: 150 t dimensions of the machine ca.: 4,95 x 3,3 x 10,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TECHNICAL DATA: Table size: 980 x 750 mm Tilting table Flywheel size: Ø 800 mm Saw blade length: max. 5770 mm / min. 5680 mm Installed power: 4 kW

CNC verical machining center Type: DMC 835 V Manufacturer: Deckel Maho Year: 2006 Control: Heidenhain iTNC 530 Total hours: 20,579 Spindle hours: 6,598 X: 835 mm Y: 510 mm Z: 510 mm Tool magazine: 20 positions Spindle cone: SK 40 Chip conveyor Accessories: weldon holders collet clamps, about 40 pcs vihorlat 160 vices 2 pcs other vices, clamps, washers Machine in good condition, under power Find more here - / Contact us at -

x-travel: 6.500 mm y-travel: 1.800 mm z-travel: 1.300 mm control: HEIDENHAIN TNC 640 clamping table: - surface area: 8.000 x 1.100 mm max. workpiece weight: 13.500 kg/m² Universal Milling Head: _ Swiveling area front/back level: automatsich Indexing: 2,5 x 2,5 ° Hirtverzahnung Constant Power at 100 % ED: 37 kW Speed range, stepless: 15 - 7.000 min-1 max. torque: 1.045 Nm tool taper: SK 50 – DIN 69871-AD internal coolant system feed: durch das Spindelzentrum automatic tool changer ATC: - Tool places: 60 Plätze diameter of tools max.: 125/250 mm workpiece length: 400 mm weight of tools max.: 20 kg internal coolant system feed: durch das Spindelzentrum changing positions: vertikal /horizontal feeds: - X-, Y- and Z-axis, stepless: 2 - 10.000 mm/min rapid in X/Y/Z: 35.000 mm/min max. feed force X-Y-Z-axis: 16.000 N total power requirement: kW weight of the machine ca.: 34 t dimensions of ...

B&A REF: 9272 TON: 85 SCREW DIAMETER: 35MM SHOT WEIGHT: 155 STROKE VOLUME: 170CM3 INJECTION PRESSURE: 1700AR PLATEN SIZES: 590 X 570MM DBTB: 400 X 360MM MIN MOULD HEIGHT: 150MM MAX MOULD HEIGHT: 450MM MOULD OPENING STROKE: 360MM MAX DAYLIGHT: 810MM EJECTOR STROKE: 125MM CONTROLS: DIMI EL 2000 CORE PULLING: 1 AIR VALVES: 1 MOTOR: 11 HEATING CAPACITY: 7.5KW SCREW DRIVE: HYDRAULIC

B&A REF: 8838 TON: 820 SCREW DIAMETER: 93MM SHOT WEIGHT: 2555 STROKE VOLUME: 2777CM3 INJECTION PRESSURE: 1478AR PLATEN SIZES: 1730 X 1560MM DBTB: 1250 X 1060MM MIN MOULD HEIGHT: 350MM MAX MOULD HEIGHT: 1100MM MOULD OPENING STROKE: 1150MM MAX DAYLIGHT: 2250MM EJECTOR STROKE: 350MM CONTROLS: SEF 2000 CORE PULLING: 3 AIR VALVES: 2 MOTOR: 93 HEATING CAPACITY: 41KW ROBOT INTERFACE: EUROMAP SCREW DRIVE: HYDRAULIC

Sumbel Herold 800 banding machine; cleaned and tested; Working width 800mm; suitable for cold glue. Gluing machine Sumbel Herold 800; cleaned and checked; working width 800mm; used for cold glue.

Presse à injecter NEGRI BOSSI 800 T Vector type 8000H-8400 Année : 2018 Nombres d’heures. : 25 000 heures? Commande : TACTUS? Force de verrouillage : 800 T? Diamètre vis : 110 mm? Volume injectable : 5160 cm3 Poids en PS : 4720 gr? Pression d’injection : 2020 bars? Dimensions des plateaux : 1670 x 1580 mm? Distance entre colonnes : 1100 x 950 mm? Epaisseur moule max : 1200 mm? Moteur de dosage électrique? 2 noyaux hydrauliques 4 soufflettes? Interface robot?

x-travel: 8000 mm y-travel: 2500 mm z-travel: 1000 mm control: Heidenhain TNC 355 taper ISO: 50 spindle speeds: 20 - 1800 mm voltage: 380 V total power requirement: 27,6 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Alpha PRPA Production Rubber Process Analyzer Model 86042 Serial number V62AAA0095 With a production outer shell which protects operators With 5 sample auto loader with the option of using 4 rolls of film or 2 interchangeably 230 VAC 7.5 AMPS 50/60 HZ 1725 VA Max 120, Min 80 CE marked Year 2011

Biete Woodward Stellgerät mit der Teilnr. 340597 for sale.

Binder heating system Wood chip heating Type RRK 640-850 Year of construction 2013 For steam and hot water production Heating capacity up to 850 kW Maximum operating temperature up to 150 °C Maximum operating overpressure 12 bar Water capacity 1520 litres Hydraulic insertion from the right front side (instead of stoker auger) Heat exchanger separately Without material feed from the bunker Flue gas cleaning via cyclone

Coolers for Glunz+Jensen Plate Developing Machines; Model 8735001001; cleaned and tested; suitable for Glunz+Jensen plate development machines. Chiller for plate processors Glunz+Jensen; Model 8735001001; cleaned and checked; used for Glunz+Jensen plate processors.

A Kittner food conveyor is available. Width: 600mm, total length: 8300mm, motor power: 370W, belt speed: 6.6m/min, angle: 31.5°, conveying height: 3300mm. Documentation available. An on-site inspection is possible.

-Thermal CTP Year 2009 -Plate Count: Approx 39,000 plates done -Exposure Time: 4,500 hours -Internal plate punch system -Blower Unit External Screen BU 800 -Min Plate Size: 450 x 370mm; Max Plate Size: 1160 x 940mm. -Maximum Imaging Area: 1160 x 924mm. Plate Thickness: 0.15 - 0.30mm. -Resolution: 2400/2438/2540 dpi, 16 diodes -Productivity: Up to 10/12 plates/ph at 2400 dpi (dependent on plate type and size) -Included RIP Harlequin HQ510PC, computer and monitor -Available immediately, totally refurbished in our warehouse

This 4-axis DMG MORI CTX Beta 800 4a was manufactured in 2013. It features a powerful Mailspindle ISM 102 with a speed of 4,000 rpm and an efficient 8/20 bar coolant system with a 600 L capacity. The machine is equipped with a 16-place star turret and a barfeeder for enhanced productivity. If you are looking to get high-quality turning capabilities, consider the DMG MORI CTX Beta 800 4a turn-mill centre we have for sale. Contact us for further details.

pressure: 30.0 t chamfer lenght: 800 mm back stop - adjustable: max. 420 mm stroke of upper beam: 100 mm dayligth: 310 mm working feed: 10.0 mm/sec return speed: 12.0 mm/sec Control: VISION 120 oil volume: ca. 38.0 l voltage: 380 V total power requirement: 4.5 kW weight of the machine ca.: 890 kg dimensions of the machine ca.: 1250 x 950 x 1900 mm current new price approx. 24.000 euros special price on request Equipment: - electro-hydraulic NC press brake - easy to operate - UNITRONICS VISION 120 NC control system for press depth back gauge (Y X axis) - NC electro-motorized back gauge (X axis) Input of target/actual value possible 2x manually adjustable stop fingers - Operation front right - Many different insert/bending tools Top tool holder : AMADA/PROMECAM - 1x freely movable foot switch - EMERGENCY OFF button at the front - Rear safety device - operating instructions The data ...

A vertical CNC 5-axis machining center POS is available. Travel X/Y/Z: 670mm/820mm/600mm, rotary table diameter: 800mm, max. table load: 1200kg, tool positions: 96, tool holder: HSK-63, speed: 18000rpm, A-axis: -100°/120°, C-axis: 360°, weight: approx. 20000kg, control: Heidenhain, operating hours: 22177h, spindle hours: 9601h. Including infrared probe, IKZ and Blum laser tool measurement. Documentation available. An on-site inspection is possible.

max. format 78 x 120 cm Year of construction 2012 Fully Automatic Paper Folding Machine Computer control with touch screen Navigator Control Pallet feeder with Vaculift and Vacubelt 4 fold pockets in the parallel fold section Automatic folding pocket adjustment Automatic folding roller adjustment Knife shaft cassette 2 folding swords in the crossfold section Automatic folding blade adjustment 1 more fold pocket after the 1st cross break Palamides alpha 500 Stacking Delivery Delivery date: immediately from stock

Key data: 8000 kN, 3743 g/PS, 105 mm

Year of Make: 1999 Clamping force: 800 tons Screw diameter: 105 mm Injection weight: 3743 gr./hp incl. Removal robot Wittmann Protective enclosure The machine has been regularly serviced and is in good working condition

BAZ Heckert CWK 800 BJ 1999

Injection moulding machine Engel DUO 4550/800 BJ 2004

Key data: 90 mm, 30 , 110 U/min

used 90 mm extruder with strand nozzle, water bath and strand granulator

Benhil 8304 foil wrapping machine which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil. The format on the machine is 10 - 25 gram, 40 x 30 x ± 10 - 25 mm, bottom folding principle. The machine is currently set on 10 gram. Packaging material: aluminium foil with photocell mark. Widht of the foil: 85 mm. The photocell line distance is 80 mm. The butter is feed with a hopper with agitator screw inside, mechanically drive from out of the main machine (tooth wheels and axles). The machine is equiped with a photocell on the paper infeed, to control the exact position of the print on the foil (correct by brake system). If there is no foil at the first folding station, the machine will stop. Mechanical belt driven outfeed conveyor of ± 1.000 mm, mounted 90° on the machine to the semi automatic case packer, Benhil 8534. The Benhil 8304 ma ...

Fully automatic cup filling and lid closing machine which can be used for packing soft and easy to pump products like butter, herb butter, etc. into tubs and close the cup with a snap cap cover (no sealing). The machine was rebuild in 2004. Rectangular with round corner format, ± 95 x 60 mm for filling ± 80 up to ± 150 gram.The butter is feed with an ± 200 liter hopper. Stainless steel dosing station. The speed can be adjusted by a frequency converter up to 80 cups per minute. Outfeed conveyor. Vacuum pump with the machine (Busch). Control panel with frequency converter., Type of Machine: Butter tub filling and lidding machine, Capacity: ± 700 Kg/h, Capacity (Units): up to 80 packages per minute, Packaging Weight: ± 80 up to 150 gram, Packaging Size: Rectangular with round corners, ± 95 x 60 mm, Year of refurbishing: R2004, Motor power: 2,2 kW, Weight: ± 1.400 kg

Benhil 8304 foil wrapping machine which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil. This machine was serviced by the previous owner and is in a as good as new condition with new controls with frequency converter (renewed in 2023). The machine is only used some weeks for trial production by the previous owner. The format on the machine is 10 - 25 gram, 40 x 30 x ± 10 - 25 mm, bottom folding principle. Packaging material: aluminium foil with photocell mark. Widht of the foil: 85 mm. The photocell line distance is 80 mm. The butter is feed by a direct connection with compensator (build on the machine) or with a hopper with agitator screw inside, mechanically drive from out of the main machine (loose delivered wit h the machine). The machine is equiped with a photocell on the paper infeed, to control the exact position of the print ...

Stephan Combicut TK 850 Mixer / Universal Machine for the production of bakery products, convenience products, vegan spreads and confectionery. Previously used in the chocolate production. Machine frame, bowl with slides, lid and side covers are all made of stainless steel. The bowl is equiped with a single jacket, 3x twin cutting blades, overpressure valve, bowl volume: 870 liter, hydraulic slide gate infeed and a valve connection infeed on the top for main product, at the bottom a hydraulic slide gate discharge for outfeed of the ready product (hydraulic controlled), 3x connections for pneumatic controlled ingredient valves on one side of the bowl (including 2x pneumatic valves) and 1x connection for pneumatic controlled ingredient valve on the other side of the bowl (including 1x pneumatic valve). Single jacketed lid with scraper of the wall (electric driven ± 25 rpm), 3x manual tigh ...

This APV Gaulin 264 MC 15-8TBS homogeniser is a 3-cylinder machine which is designed for 1.000 liter per hour with a maximum pressure of 500 bar. The homogensier is equipped with 2-stages with ball valve cylinder, 1 stage hydraulic controlled, 1 stage manual controlled. Manometer. Motor: 22 kW - 380 V - 44 Amp - 50 Hz - 1.465 rpm. Stainless steel cladded. Oil pumping system outside the machine., Type of Machine: Homogeniser, Capacity: 1.000 liter per hour, Stages: 2 Stages, Max. Pressure: 500 bar, Valve cylinder: Ball valves, Product: Dairy, Piston diameter: 51 mm, Motor: 22 kW - 380 V - 44 Amp - 50 Hz - 1.465 rpm, Dimensions: 180 x 110 x 180 cm, Weight: 2.115 kg

Multi-Blade Saw Paul K3 / 800 Working width 800 mm Cutting height 60 mm 1 saw shaft, saw blades are adjustable via extension rings Connected load 23.5 kW Technically good condition

Code: 0072 Brand: T.O.P. ITALIA Model: FS 850 - CE Standard Drilling and inserting gluing machine + dowel pins on horizontal workpieces for furniture, custom-made furniture, kitchens, bathroom furniture - CE Standard - Year 2018 Technical data: Maxworkable length mm 1600 Max workable height 850 Panel thickness mm 8 - 50 Independent drilling aggregate: Rotation speed 6000-18000 rpm - Max drilling depth mm 35 - Drilling depth adjustment - Hole cleaning system Glue + dowel insertion unit: Dowel dimensions mm 8 x 30 - Max dowel protrusion 15 mm Glue and water system: Container for automatic glue feeding and system cleaning Feeder for automatic pin loading Numerical control and operator interface: Albatros numerical control for 4-axis control - Touch screen supervisor PC - Monitor 12" TFT - Windows operating system - Parametric CAD 3D TPAEdi32 Compressed air 6 bar Overall  ...

Model: ARJES VZ 850 DK, Type: Two-shaft shredder, Year of manufacture: 2017, Operating hours: 4,200 h, Motor: Volvo Penta diesel, about 565 kW / 768 hp, Self weight: approx. 26,000 kg, Dimensions (approx.): 8,800 × 2,900 × 3,200 mm (L × W × H), Shredding system: Two-shaft universal shredder, Areas of application:, - Used timber (A1–A4), green cut, - debris, - Mixed waste/tires, model: ARJES VZ 850 DK, Type: Two-shaft shredder, Construction year: 2017, operating hours: 4.200 h, own weight: approx. 26,000 kg, Shredding system: Two-shaft universal crusher

table length: 1200 mm table width: 800 mm table height: 980 mm : kg weight of the machine ca.: 0.95 t Workstation - Hole diameter: 28 mm - Grid: 100 x 100 mm - Side panels: 150 mm - Panel thickness: 10 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table trolley TW 800 Stainless Steel Table Trolley Worktop top Shelf at the bottom Robust design Dimensions: 800 x 600 x 990 mm, WxDxH Mobile with 2 brake rollers Used equipment / as good as new

Key data: 3000 mm, 800 mm, 720 mm

Control: Smooth X Travels X-axis: 3,000 mm Y-axis: 800 mm Z-axis: 720 mm B-axis: 220° C-axis: 360° Table Table: 3,500 mm x 820 mm Max. table load: 2,500 kg Milling spindle Drive power: 35 kW Max. spindle speed: 18,000 rpm SK-40 Tool magazine Number of tool positions: 48 Special accessories Additional work area light Tool magazine with 48 tool positions Rotary table diameter: 500 mm Chip conveyor Mayfran, ejection High-pressure pump 15 bar incl. gap filter Synch. Threading Rapid traverse constant angle of inclination Ethernet Operation Function Cylinder interpolation Hours Switch-on time: approx. 12,000 hours Spindle hours: approx. 4,500 hours

For sale is a production cell consisting of: 1 x MAZAK VARIAXIS i-800 1 x MAZAK VC PRIMOS 400 L 1 x CELLRO ELEVATE with FANUC R-2000-165 Robot Year of construction 10-2020 Commissioning 2021 MAZAK VARIAXIS i-800 5-axis machining center Smooth X control Pallet changer, 2 pallets 5-axis simultaneous machining Travels: X-axis: 730 mm Y-axis: 800 mm Z-axis: 560 mm A-axis: -120° to +30° C-axis: +-360° Max. spindle speed 10,000 rpm SK-50 mount, -Tool magazine for 120 tools -Preparation for hydraulic clamping incl. clamping function pallet -Automatic pallet changer -Electronic handwheel -Knoll coolant system KF400/2300 -Paper belt filter -High pressure pump 70 bar -Knoll chip conveyor -Renishaw NC4 Laser -Air blowing on the NC4 laser -Mazak Monitoring B, incl. Renishaw RMP600 button - Tool Breakage Monitoring (TBR) & Mazak Monitoring System (MMS) EIA/ISO  ...

B&A REF: 9265 TON: 220 SCREW DIAMETER: 55MM SHOT WEIGHT: 523 STROKE VOLUME: 575CM3 INJECTION PRESSURE: 1550AR PLATEN SIZES: 770 X 770MM DBTB: 510 X 510MM MIN MOULD HEIGHT: 210MM MAX MOULD HEIGHT: 630MM MOULD OPENING STROKE: 550MM MAX DAYLIGHT: 1180MM EJECTOR STROKE: 190MM CONTROLS: E-ONE CORE PULLING: 1 AIR VALVES: 1 MOTOR: 30 HEATING CAPACITY: 14.6KW SCREW DRIVE: HYDRAULIC

B&A REF: 9235 TON: 320 SCREW DIAMETER: 55MM SHOT WEIGHT: 434 STROKE VOLUME: 474CM3 INJECTION PRESSURE: 1650AR PLATEN SIZES: 1040 X 1040MM DBTB: 720 X 720MM MIN MOULD HEIGHT: 300MM MAX MOULD HEIGHT: 800MM MOULD OPENING STROKE: 600MM MAX DAYLIGHT: 1400MM EJECTOR STROKE: 250MM CONTROLS: SELOGICA TOUCH CORE PULLING: 1 AIR VALVES: 1 MOTOR: ALL SERVO DRIVES SCREW DRIVE: ELECTRIC

Condition NEW Brand NORD Type SK773.1 VL-80LH/4 TF RD Voltage Volt 3 fase 400 volt Force KW 0,75 KW Rotational speed RPM 5,4 RPM i 260,18 Shaft size mm 50 mm Version IE2 Length 60.00cm Width 25.00cm Height 25.00cm All employees speak Dutch, German, and English. Prices are exclusive of VAT. Shipping is possible (for an additional charge). (Changes and errors in technical data, information, and prices as well as prior sale are reserved.)

Pull-off trolley for 80cm deep pull-offs NEWagen profile 40x40mm screwedOuter dimensions: W: 126cm D: 64cm H: 184cm10 CushionsInterior dimensions: W: 118cm D: 64cmThe trolley is suitable for 80cm deep and 60cm wide ovenSee pictureWe have various large pullers and pull-offs in stockDetails see pictures

- used - manufacturer Hobart - type PF 801 - has 3 speeds - 1x 80 litre stainless steel kettle - 2x attachments, 1x whisk and 1x flat beater  see pictures for details.

KD Putz Sheet Metal Cleaning Machine Avidi 800 Product description Manufacturer: KD Putz Type: Avidi 800 Condition: used, functional, bakery condition Material: Stainless steel Cladding with emergency stop switch on castors, mobile For 58 x 78 cm trays, 2-edge on the short side Back output Power connection: 230/400 Volt / 4 A / 1.1 kW Exterior Dimensions: width 112 cm, depth approx. 92 cm, height 84 cm For details, see pictures.

Manufacturer : JerosType : 5015/828400Volt 50Hz 1,5kW 4,4AZto clean 2-edged baking and perforated trays.For sheet width 78cmchassis completely made of stainless steela dirt drawer made of stainless steelFor 78x58cm wide trays on rollsDetails see picture

Dough machine / planetary agitator / planetary mixer- used- Manufacturer Hobart- Type H 800- has four speeds- 2x 80 liter stainless steel kettle- 2x attachments, 1x whisk and 1x flat beaterDetails see pictures.