sip 8 used for sale

Technical data of the pallet rack crossbar: Shelving system: Polypal Type: Stockpal The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: orange Box profile: 90 x 50 mm Type: SKVBN 09050CP22 Clasp: 2 HK (hooks) Design: Head crossbeam Clear width: 1,850 mm 02x Locking pins, used Design: completely galvanized For securing the longitudinal members Against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Technical data of the pallet rack stand: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Pallet rack stand, used Material colour: sendzimir galvanised Stand Type: P95 Profile dimensions: 90 x 75 x 2.5 mm Incl. cross and diagonal struts, Stand protectors and base plates The stands are pre-assembled ( bolted truss ) Height: 2,200 mm Depth: 800 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Technical data of the pallet rack stand: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Pallet rack stand, used Material colour: sendzimir galvanised Stand Type: P95 Profile dimensions: 90 x 75 x 2.5 mm Incl. cross and diagonal struts, Stand protectors and base plates The stands are pre-assembled ( bolted truss ) Height: 2,200 mm Depth: 850 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Groninger ZSK800 Cap Sorter BJ.2002 With 5 different format sets Universally applicable, in very good condition!

Universal Crimping Machine, Border FASTI Type 81504 - UBPB 1,5Masch. No. 828152 001 Year of construction 1982Sheet thickness max. 1.5 mmPlate thickness min. 0.5 mmBoard height max. 12 mmBoard height min. 4 mmThroughput speed 4 / 8 m/min. Roll diameter 60 mmmin. Inner radius of curvature for 90 elbow piece 100 mmDrive power 1.1 / 1.4 kWNerg connection 400 volts, 50 Hz- Sheet metal guide- Operating instructions (as copy)Space requirement L x W x H 700 x 610 x 1250 mmWeight 150 kg; used

Manufacturer: Murata Model: Vortex 861 MVS Year of Manufacture: 2010 Spindle Type: Super FAT Conicity: 5º57 Traverse: 6” Feed Can Size: Diameter = 20” – Height = 1,20 m Doffers: 1 Splicer Nozzle Prism: G2Z No Of Splicer: 2 Clearer Type: MSC Waxing: yes The machines do NOT have the Poly Master. Power Capacity: 32 kW Current: 73 A Voltage: 380 V Frequency: 60 Hz Phase: 3 Quantity: 4 Year: 2010 No Of Spindles: 80 Model: Vortex 861 MVS Spindle Type: Super FAT Conicity: 5º57 Traverse: 6” Feed Can Size: Diameter = 20” – Height = 1,20 m Doffers: 1 Splicer Nozzle Prism: G2Z No Of Splicer: 2 Clearer Type: MSC Waxing: yes Find more here - .ucymachines/ Contact us at - sales@ucymachines

table diameter: mm workpiece height: mm number of wheels: 2 total power requirement: 11 kW weight of the machine ca.: 4,2 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: mm workpiece height: mm number of wheels: 2 total power requirement: 8 kW weight of the machine ca.: 4,2 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 800 mm grinding width: 500 mm workpiece height: 425 mm total power requirement: 15 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wheel diameter: 680 mm sawblade length: 8550 mm Sawblade width max.: 1,3 mm Cutting height: mm Motor output: 20 kW Table dimensions: 600 x 620 mm Feed speed: m/min. Machine height: mm Weight: 10.000 kg Bandsaw horizontal, Precision-Saw for Silicon (Solar industry) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 120 mm gear width: 160 mm max. module: 3 min. module: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Two Flank Gear Tester The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 400 mm gear width: NA mm max. module: 5 min. module: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Manual Two Flank Gear Tester The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Power: 7,5 KW Receiver: 270 L weight of the machine ca.: 180 Kg dimensions of the machine ca.: 1700x600x1270 mm feed pressure: 10 bar liter capacity: 850 l/min connected load frequency: 400 V The UWM 7.5 / 850/270 K30 + start box with K30 pump, V-belt drive, is suitable ideal for use at home, in the workshop, in industry and for heavy work. The starting box is used to obtain a lower starting voltage (around to reduce peak voltages. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Power: 7,5 KW Receiver: 500 L weight of the machine ca.: 300 kg dimensions of the machine ca.: 1,7x 0,6 x 1,45 m feed pressure: 16 bar liter capacity: 870 l The UWM 10/870/500 K50 + Startbox is equipped with a K50 pump. Note that this is a high-pressure version (especially for trucks or places where higher pressure is required), Industry and hard work. The starting box is used to obtain a lower starting voltage (around to reduce peak voltages. The UWM 10/870/500 is available with 400 V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 800 mm table load: 0,6 t table height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Circular Indexing Table dia 800 mm, motorized rotating, swivable The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 8,0 kN stroke: 40 mm throat: 90 mm Working height from to: 50 - 200 mm table surface area: 120 x 160 mm weight of the machine ca.: 22 Kg dimensions: 160 x 230 x410 mm Knee lever hand press with fine height adjustment SPECIAL PRICE! • Working height adjustable by simply loosening the clamping screws on the stand • Working height fine adjustment for HK 800 = adjustment of the press head to the desired working height. The fine adjustment takes place forced in both directions via a threaded spindle • Hand lever arranged in a user-friendly manner, return via spring The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 199,5 x 67,5 x 64 mm operating pressure: 2,5 - 8,0 bar air consumption at 6 bar: 350 l/min weight of the machine ca.: 0,23 t dimensions: 2,10 x 1,30 x 0,88 m Duo blast cabinet 10 PET sheets to protect the windows 10 PET sheets to protect the fluorescent lighting 2 foot pedals 2 jet guns 6 ceramic nozzle inserts (6 mm diameter) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 680 mm capacity 90 degrees: square: 640 mm : 820x610 saw band length: 5850 x 41 x 1,3 mm band speed: 15 - 100 m/min table height: 800 mm total power requirement: 5,5 kW weight of the machine ca.: 4,45 t dimensions of the machine ca.: 5,85 x 3,6 x 2,7 m 2-column band saw for quick cutting, K-tech 800H with pusher system P 15. P 30 (option), Fast, quiet and ergonomic cutting Special development for cutting profiles and beams as well as solid material. The material is fixed vertically on and section sides. The machine is from K-tech 800 H standard with an additional horizontal vice equipped. The interaction of the hydraulic Saw frame lowering, material positioning and the Pusher system is CNC controlled. The machines come standard with the environmentally friendly B&S-Clean Cut cutting system” with minimal quantity lubrication equipped. This saves cleaning effo ...

table length: 1200 mm table width: 800 mm table height: 840 - 890 mm weight of the machine ca.: 0,3 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional Surface flatness 0.2 - 0.4mm on 1000mm. The table can be moved with a pallet truck. Pallet truck is not included in the scope of delivery The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 680 mm capacity 90 degrees: square: 640 mm : 820x610 capacity 45 degrees: round: 550 mm capacity 45 degrees: square: 550 mm capacity 45 degrees: flat: 550x600 mm capacity 60 degrees: round: 370 mm capacity 60 degrees: square: 370 mm capacity 60 degrees: flat: 370x600/450 mm saw band length: 7260 x 41 x 1,3 mm band speed: 15 - 100 m/min table height: 800 mm total power requirement: 5,5 kW weight of the machine ca.: 4,8 t dimensions of the machine ca.: 5,85 x 3,7 x 2,7 m 2-column double miter band saw for quick cutting with pusher system P15. Option P30 Hydraulic saw frame lowering • NC controlled • Automatic angular positioning from + 60° to – 60° High quality automatic miter adjustment Special development for cutting profiles and beams. The highest positioning accuracy is achieved via the new B&S positioning system”. reached. An intelligent NC contro ...