single used for sale

: neu : ca. 4 Monate ab Auftragse : Italien : 25000 € : 510 € : 70 to : 500 mm : 700x500 mm : 600 mm : 25 mm/s : 5 mm/s : 4 kW : 1400 mm : 900 mm : 2250 mm : 1900 kg 2 speeds adjustable max. pressure manomete The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 31400 € : 634.28 € : 100 to : 500 mm : 800x600 mm : 615 mm : 26 mm/s : 4 mm/s : 4 kW : 1600 mm : 900 mm : 2300 mm : 3100 kg 2 speeds adjustable max. pressure manomete The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 43200 € : 872.64 € : 150 to : 500 mm : 800x600 mm : 630 mm : 22 mm/s : 3 mm/s : 4 kW : 1800 mm : 1200 mm : 2400 mm : 4500 kg 2 speeds adjustable max. pressure manomete The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 55200 € : 1104 € : 200 to : 500 mm : 1000x600 mm : 640 mm : 21 mm/s : 2 mm/s : 5.5 kW : 1800 mm : 1300 mm : 2500 mm : 6400 kg 2 speeds adjustable max. pressure manomete The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Serial Number: 20916 Weight: 0,35 tons Power: 3.7 kW Air pressure: 6- 10 Bar Length mm: 3900 Width mm: 1300 Height mm: 1800 Working height: 1030mm Transport size L x W x H: 3,9 x 1,3 x 1,8 mtr. Min.-max glass size: 100x 100 -800x3400 in mm Condition machine : As good as new Control type: Automatic Electric. Connection: 230 Volt Missing parts: Hotmeld Documentation: Yes Instructions: Yes Electric diagram: Yes Photos/film available: Photos and video available

Metso 2000 shredder Opportunity for bale openers, bag openers, construction waste, bulky waste and containers! The right one for little money! Perfect for wheel loader loading or grabbing excavators! Electro-hydraulic drive With vibrating chute With control cabinet with Siemens touch panel Hydraulic power pack with hydraulic tank approx. 1000 liters with oil tank heating! Dismantling and loading from the site as is! Operating instructions 110kW electric motor

Processing both PVC dry blend / PVC pellets ‑ Special design extruders for a perfect PVC melting and uniform plasticization ‑ Specific rotating dies for an even material flow and thickness distribution​ ‑ Automatic calibration cages and collapsing boards ‑ Fully automatic winding stations ‑ Water cooling circuit on specifics and key points of the lines ‑ Easy machine operation by LCD touch screens ‑ High level of automation and process optimization solutions.

Full Description Variable angle fences enable the Wegoma WSA-1-E to achieve welded angles between 30° and 180° on 150mm, 180mm and 225mm cills. The WSA-1-E boasts the ability to achieve double-reverse butt welding thanks to the large setting and heater plates.

: neu : 2024 : 7305 : prompt, Zwischenverkauf v : Italien : 46400 € : 941.92 € : 1 : 100 to : 500 mm : 700 x 350 mm : 800 x 600 mm : 500 mm : 300 mm : 25 mm/s : 4 mm/s : 4 kW : 1900 mm : 1200 mm : 2600 mm : 2100 kg 2-fold round guidance table and ram with T-slots 2 hand operation Siemens PLC manometer users manual incl. pressure switch OPTIONS: time of delivery with options 2 - 3 months from order 4-fold round guidings € 1.900,- Light barrier € 7.300,- Siemens control for programming of stroke and press time € 4.000,- Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € 9.000,- Working hour c ...

Zusammentragmaschine fuer Einzelbogen - cccccccccc Edelmann Form - Collect A3 Year 1982 - Serial-No. 954 9 Stationen Size min. 130 x 80mm - max. 3801 x 480mm Speed Format DIN A3 5000 sets per hour Speed Format DIN A4 10.000 sets per hour Speed steple -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-

Lindner Micromat MS 2000 Drive motor : 75 kW ,400 V/50 Hz Control cabinet: complete star/triangle Rotor speed: approx. 80 rpm at 50 Hz. Rotor blade: 104 pcs. New Rotor blade shape: 43x43x19.5 mm Infill opening: LxW 2030 x 1650 mm Rotor length: 2030 mm Rotor flight circle: 560 mm Wiper comb:yes Counter knife: yes Hydraulic power unit: complete Hydraulic cylinder sieve cassette:sieves 50x50 mm Total weight approx. 9.5 t Dimensions LxWxH mm: approx. 4520 x2970 x 2660 mm Viewing and trial run possible by appointment. incl. funnel Shipping time: immediately

Doppstadt DW 3060 Büffel - Year of construction 2012 - Running hours 5232 - Engine Mercedes Benz overhauled - AD Blue - Hydraulic drive (self drive) -Remote control - Overbelt magnet Machine is overhauled and immediately available

Workpiece thickness: 8 - 50 mm Edge thickness: Coil edges 0.4 - 3 mm Feed speed 10 m/min Equipment: manual height adjustment. Joint milling unit, 2 motors Panel edge heating Gluing area Pressure zone 1 driven and 2 non-driven rollers End trims, 2 x 0,8 kW motors, straight and chamfer 15? Top and bottom trimming Profile scraping unit for PVC edging Glue scrapers

Key data: 60

Extruder 1 screw: 60 mm Ø, 25 L/D, brand: Flag, motor: 11 KW (15 hp). 6-speed gearbox with electrical panel. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

Key data: 80

Extruder 1 spindle Brand: Bandera, 80 Ø diám 25L/D, with two speeds, alternating current motor: 55 kw (75 hp) with variable speed drive. Two replacement spindles, one for rigid PVC and one for plasticized PVC. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

Key data: 37 mm, 24 , 13 U/min

Used Kühne Extruder Year of construction :1988 Extruder is functional. Gearbox slightly leaking.

Key data: 50 mm, 30

Used extruder in good condition with screw size: diameter 50 mm x 30v grooved intake and degassing zone Type RH 241-1-50-30v with DC drive 30.2 kW Built in 1993 Immediately available without control cabinet With control cabinet 4-6 weeks delivery time

faceplate diameter: 1250 mm swing diameter: 1500 mm turning height: 1200 mm slide adjustment: 700 mm Side head: 620 mm turning speeds: 4-315 U/min total power requirement: 45 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Extruder 1 screw: 70 Ø diam, 35 L/D. Brand: Flag, engine: 37 KW (50 hp). No electrical panel. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

COMPLETE REFUSE-DERIVED FUEL PLANT WITH HIGH CAPACITY Year of construction 2009 13,500 operating hours - 1 x pre-shredder TYPE VECOPLAN - 1 x Magnet - 1 x air classifier TYPE WESTERIA - 3 x secondary shredder type VECOPLAN - approx. 150 meters of conveyor belts - Electrical control - Spare parts worth approx. € 70 000 Installed capacity approx. 1200 kW Product size 25 to 80 mm according to customer's requirements. We can dismantle the system and load it onto trucks.

Carriage 3m40 Main motor: 5.5 kW Speeds: 3000, 4000, 5000, 6000rpm Sawblade tilting: -45 ? / 90 ? motorized automatic Sawblade rise, fall and tilt motorised Motorized automatic right stopper 1m35 Cross fence for cutting up to 3m20 automatic motorized Max sawblade 450mm

Cast iron table Lateral tenoning carriage Spindle diameter 50 mm. Table 110 x 90 cm Support rail in the front Motor 4 kW 5 spindle speeds: 2900 - 4400 - 6000 - 8000 - 10000 tr/min

Edge banding installation consisting of the following elements: - feed table TB 10/10/20 - edge bander KAR 610/20/PU/S2 - panel turning station cross/longitudinal TD 51/30/12 - destacking robot KUKA KR 180-2 PA - Ligmatech return system installation specifications: workpiece dimensions length 300 - 3200 mm width 120 - 1200 mm (for dogs), 1800 mm (equal to longitudinal entry) thickness 12 - 60 mm weight max 80 kg edging material 0.4 - 2.0 mm throughput speed 25m/min robot 10 strokes /min Equipment edge bander: Infeed fence automatically adjustable anti adhesive sprayers Squaring device UF20: 2 x 4.0 KW Workpiece preheating Glue application unit PU34 6-fold edge magazine for rolls Pressure zone with 1 driven, 6 non-driven rollers, automatic adjustment End trims HL86, pneumatic adjustment phase/straight, 2 motors 0.22 kW Rough trimming: 2 x 0.55 KW Contour trimming FF12 , 4 motors 0.4 kW Pr ...

Panel thickness: 12 - 60 mm Feed speed: 18 - 24 m/min Edge thickness: 0,4 - 3 mm for coil edges, 0,4 - 20 mm for strips / solid wood Equipment: Help carriage feeding the panels rectangular automatic fence at the infeed Squaring device: 2 x 3,0 KW Panel edge pre-heater Hot melt unit: QA34 / A20 edge magazine Lateral pressure rollers, thickness programmable, 1 driven, 6 non-driven rollers End trims HL83, programmable change straight/chamfer, 2 motors 0,5 kW Rough trimming: 2 x 1,5 KW Top/bottom fine trimming, tilting, 2 x 0,4 kW Contour trimming FK 13, 2 x 0,4 KW, with 8-fold toolchangers Universal milling motor 4kW Profile scrapers Flat scrapers Buffing unit with oscillation Controlls: HOMATIC NC16

I am selling a set of 3 Protti rectilinear machines. 1- PV93SX – Year 1996- E: 12- Series: 04971961-Cm: 110 2- PV93SX – Year 1996-E: 12-Series: 4307196-Cm: 110 3- PV3P-Year 2001-E:12-Series 67327593-Cm: 130 Unique Occasion Machine 1-PV93SX-Unit price 2500 Euros. Machine 2-PV93SX-Unit price 2500 Euros. Machine 3-PV3P-Unit price 8000 Euros. Not included in the price: programming computer and more than 300 knitwear programs. Chance-

Key data: 200 t

C - Column press make : Schleifenbaum and Steinmetz Printing capacity : 200 tons Table dimensions : 1200 x 1000 mm With 2 hand controls. Installation height : Cylinder stroke : machine was originally designed by the manufacturer as a carp press designed for curved discs. It was used by us as an auxiliary press for punching boiler bottoms. machine cannot be built on the ground without an independent foundation. Hall floor. Total weight : 12 tons.

Technical data shredder: Manufacturer Lindner Recyclingtech GmbH Type Micromat 2000 Year of construction 2012 Operating hours 5,842 hours, as of March Drive power 160 kW Filling opening 2,790 x 2,405 mm Filling height 2,594 mm Cutting chamber volume 4.5 m³ Number of sieve sheets 4 pieces Discharge width 2,225 mm Input density 160 up to 200 kg/m³ Input granulate

Technical data shredder: Manufacturer Vecoplan AG Type VAZ 1100 XL K Year of construction 2014 Operating hours 1,224 hours Electromechanical drive Drive power 37 kW Speed 160 rpm Rotor length 1,070 mm Rotor diameter 370 mm 48 cutting crowns 40 x 40 mm Machine dimensions without hopper 2,550 x 1,900 x 1,110 mm (l x w x h) Weight 3,1 tonnes Application description of the manufacturer: The Vecoplan VAZ® 1100 K XL Rotary Shredder is designed especially for size reduction of difficult industrial materials such as plastics, dunnage, wood scrap, medical waste, municipal waste, furniture parts, pallets, carpet, cardboard and paper. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Description: Mostly made of steel Approx. Onsite Dimension. (l x w x h): 5,000 x 600 x 5,000 mm, weight approx.: 500 kg

Description: - Control: conventional - Pressure: 125 t - Throat: 400 mm - Stroke: 6 - 160 mm - Total power requirement: 11 kW - Number of strokes: 60 Strokes/min - Installation height: 525 mm - Ram adjustment: 100 mm - Ram surface: 800 x 550 mm - Table surface: 1100 x 750 mm - Drain opening in Table: 400 mm - Stand passage: 740 weight approx.: 9,000 kg, Approx. Onsite Dimension. (l x w x h): 2,600 x 1,900 x 3,300 mm

HL 200 ton 4 column press Capacity: 200 ton Passage between uprights: 600 & 280 mm Max ram adjustment: 600 mm Distance between table -- ram: 900 mm Table area: 600 x 600 mm Length : 2600 mm Depth : 2220 mm Height: 4250 mm Weight: 6 ton

HL 200 ton 4 column press Capacity: 200 ton Passage between uprights: 600 & 280 mm Max ram adjustment: 600 mm Distance between table -- ram: 1100 mm Table area: 600 x 600 mm Length : 2600 mm Depth : 2220 mm Height: 4250 mm Weight: 6 ton

Description: Content: various electronic components and wiring. Approx. Onsite Dimension. (l x w x h): 1,500 x 600 x 2,100 mm, weight approx.: 30 kg

Description: Type of edging Thin edge Thick edge Gluing System EVA Hotmelt Premilling Unit yes Corner Rounding Unit yes Max feed speed 11 m/min Maximum panel thickness 50 mm Operating Units 8 nr Min. panel height 8 mm Max. panel height 50 mm Min. edge thickness 0.4 mm Max. edge thickness 3 mm Max. forward feed speed 11 m/min Top pressure yes Panel support guides yes No. Panel Sizing / Milling units 1 NO. PANEL SIZING / MILLING UNITS 1 Unit : pre-milling unit automatic timed intervention : yes motor power : 2.2 KW Edge coil magazine yes no. positions 1 Gluing system yes glue pot for EVA hot melt glue yes Roller set to press the edge yes no. pressure roller 3 No. Edge Processing Units 5 NO. EDGE PROCESSING UNITS 1 Processing Unit : end trimming no. motors : 2 motor power : 0.18 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 2 Processing Unit : top and bottom rough trimming no. motors : 2  ...

Description: Max. edge thickness 30 mm Max. forward feed speed 20 m/min Pressure with rubber belt Panel support guides , with positioning by NC , NO. PANEL SIZING / MILLING UNITS 1 Unit : pre-milling unit Constructor model : 08.376 automatic timed intervention , motor power : 3 KW r.p.m. : 12000 RPM Edge coil magazine glue pot for EVA hot melt glue premelter for EVA hot melt glue no. pressure roller 9 with positioning by NC , NO. EDGE PROCESSING UNITS 1 Processing Unit : end trimming no. motors : 2 NO. EDGE PROCESSING UNITS 2 Processing Unit : top and bottom rough trimming no. motors : 2 motor power : 1.85 KW r.p.m. : 11500 RPM NO. EDGE PROCESSING UNITS 3 Processing Unit : fine trimming to trim and round no. motors : 2 motor power : 1 KW r.p.m. : 11500 RPM NO. EDGE PROCESSING UNITS 4 Processing Unit : Corner rounding no. motors : 2 with positioning by NC , motor  ...

Description: Max. panel height 60 mm Max. edge thickness 3 mm Pressure with rubber belt NO. PANEL SIZING / MILLING UNITS Unit : pre-milling unit Constructor model : RT20 motor power : 2 KW r.p.m. : 9000 RPM Edge coil magazine no. positions 6 Gluing system yes glue pot for EVA hot melt glue premelter for EVA hot melt glue no. pressure roller 3 No. Edge Processing Units 5 NO. EDGE PROCESSING UNITS 1 Processing Unit : end trimming Constructor model : IT90 no. motors : 2 motor power : 0.35 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 2 Processing Unit : top and bottom rough trimming Constructor model : RS10 no. motors : 2 motor power : 0.75 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 3 Processing Unit : fine trimming to trim and round Constructor model : RF10 no. motors : 2 motor power : 0.35 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 4 Processing Unit : edge scraping Constr ...

Description: Max. panel height 60 mm Max. edge thickness 3 mm Max. forward feed speed 24 m/min Top pressure , NO. PANEL SIZING / MILLING UNITS , Unit : pre-milling unit Constructor model : RT20 automatic timed intervention : , motor power : 2 KW r.p.m. : 9000 RPM Edge coil magazine , no. positions 6 glue pot for EVA hot melt glue , premelter for EVA hot melt glue , Roller set to press the edge , NO. EDGE PROCESSING UNITS 1 Processing Unit : end trimming Constructor model : IT90 no. motors : 2 motor power : 0.35 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 2 Processing Unit : top and bottom rough trimming Constructor model : RS10 no. motors : 2 motor power : 0.75 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 3 Processing Unit : fine trimming to trim and round Constructor model : RF10 no. motors : 2 motor power : 0.37 KW r.p.m. : 12000 RPM NO. EDGE PROCESSI ...

Description: Position: 1 SubFamily: Edgebander BATCH 1 Brand: BIESSE Model: STREAM B1 10.5 MDS Type of edging Thin edge Thick edge Gluing System EVA Hotmelt  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  , Premilling Unit , Corner Rounding Unit Grooving Unit , Maximum panel thickness 60 mm Max. panel height 60 mm Min. panel length 150 mm Min. panel width 65 mm Min. edge thickness 0.3 mm Max. forward feed speed 25 m/min Pressure with rubber belt Panel support guides , with positioning by NC , Infeed panel alignment system , MDS No. Panel Sizing / Milling units Unit : pre-milling unit automatic timed intervention Edge coil magazine , no. positions 12 glue pot for EVA hot melt glue , premelter for EVA hot melt glue , no. pressure roller 4 with positioning by NC , No. Edge Process ...

Description: Max. panel height 60 mm Min. panel length 130 mm Min. panel width 65 mm Min. edge thickness 0.4 mm Max. edge thickness 3 mm Max. forward feed speed 30 m/min Pressure with rubber belt No. Panel Sizing / Milling units , Unit : pre-milling unit Constructor model : R3 L20 motor power : 4 KW r.p.m. : 9000 RPM Lamps to preheat the side of the panel , Edge coil magazine , no. positions 2 glue pot for EVA hot melt glue , premelter for PUR glue , Roller set to press the edge , no. pressure roller 5 No. Edge Processing Units 10 Processing Unit : end trimming Constructor model : 8,42/39/B no. motors : 2 Processing Unit : fine trimming to trim and round Constructor model : 08.055 Processing Unit : Corner rounding Constructor model : 08.342 Processing Unit : edge scraping Processing Unit : belt sanding Constructor model : 08.62 Processing Unit : belt sanding Const ...

Description: Max. panel height 50 mm Min. edge thickness 0.4 mm Max. edge thickness 5 mm Max. forward feed speed 12 m/min Pressure with idle wheels NO. PANEL SIZING / MILLING UNITS , Unit : pre-milling unit automatic timed intervention motor power : 1.8 KW Edge coil magazine yes glue pot for EVA hot melt glue , premelter for EVA hot melt glue , Roller set to press the edge , no. pressure roller 4 NO. EDGE PROCESSING UNITS 1 Processing Unit : end trimming no. motors : 2 motor power : 0.35 KW NO. EDGE PROCESSING UNITS 2 Processing Unit : top and bottom rough trimming no. motors : 2 motor power : 0.65 KW NO. EDGE PROCESSING UNITS 3 Processing Unit : fine trimming to trim and round no. motors : 2 motor power : 0.65 KW NO. EDGE PROCESSING UNITS 4 Processing Unit : Corner rounding no. motors : 2 motor power : 0.5 KW NO. EDGE PROCESSING UNITS 5 Processing Unit : edge scraping NO ...

Description: Type of edging Thin edge Thick edge Solid wood Gluing System EVA Hotmelt Premilling Unit yes Corner Rounding Unit yes Max feed speed 14 m/min Maximum panel thickness 60 mm Operating Units 8 nr Min. panel height 8 mm Max. panel height 60 mm Min. panel width 70 mm Min. edge thickness 0.3 mm Max. edge thickness 3 mm Max. forward feed speed 14 m/min Top pressure yes Pressure with idle wheels Panel support guides yes with positioning by NC yes No. Panel Sizing / Milling units 1 NO. PANEL SIZING / MILLING UNITS 1 Unit : pre-milling unit automatic timed intervention : yes motor power : 2.2 KW Lamps to preheat the side of the panel yes Edge coil magazine yes no. positions 1 Gluing system yes glue pot for EVA hot melt glue yes premelter for EVA hot melt glue yes Roller set to press the edge yes no. pressure roller 3 with positioning by NC yes No. Edge Processing Units 6 NO. EDGE PROC ...

faceplate diameter: 1200 mm swing diameter: 1600 mm turning height: 1250 mm slide adjustment: 800 mm Control: Siemens type: 840 c power capacity: 56 kW : total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1250 mm swing diameter: 1450 mm turning height: 800 mm slide adjustment: 750 mm Control: Siemens type: 840 D power capacity: 56 kW tool holder: 5 Pos main drive: 22 kW transmission ratio: 2 turning speeds: 90/160 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1550 mm swing diameter: 1750 mm turning height: 1250 mm slide adjustment: 700 mm Control: Siemens type: 840 D power capacity: 56 kW transmission ratio: 2 turning speeds: 200 U/min : live tooling: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1000 mm swing diameter: 1500 mm turning height: 1700 mm Control: Siemens type: 810 transmission ratio: 2 turning speeds: 500 U/min Tools changer for 12 tools: paper filter: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Individual dimensions  ,2700 x ,800 x 3000 mm Cantilever arm length 500 mm Upright load 2000 kg Upright profile ,IPE 140 Cantilever arm type Medium 70 MM Without visible content Approx. Onsite Dimension. (l x w x h): 1,000 x 3,000 x 1,500 mm, weight approx.: 1,300 kg

Description: Min. edge thickness 0.3 mm Max. edge thickness 3 mm , Max. forward feed speed 25 m/min Pressure with rubber belt Panel support guides , with positioning by NC , Infeed panel alignment system , NO. PANEL SIZING / MILLING UNITS , Unit : pre-milling unit automatic timed intervention motor power : 3 KW r.p.m. : 9000 RPM Lamps to preheat the side of the panel , Edge coil magazine , glue pot for EVA hot melt glue premelter for EVA hot melt glue , Roller set to press the edge no. pressure roller 7 with positioning by NC , No. Edge Processing Units 7 NO. EDGE PROCESSING UNITS 1 Processing Unit : end trimming no. motors : 2 motor power : 0.8 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 2 Processing Unit : top and bottom rough trimming no. motors : 2 motor power : 1.5 KW r.p.m. : 12000 RPM , NO. EDGE PROCESSING UNITS 3 Processing Unit : Corne ...

Description: Max. panel height 50 mm Min. panel width 70 mm Min. edge thickness 0.4 mm Max. edge thickness 3 mm Max. forward feed speed 10 m/min Pressure with idle wheels Panel support guides NO. PANEL SIZING / MILLING UNITS Unit : pre-milling unit Edge coil magazine Gluing system glue pot for EVA hot melt glue Roller set to press the edge no. pressure roller 3 NO. EDGE PROCESSING UNITS 1 Processing Unit : end trimming no. motors : 2 motor power : 0.18 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 2 Processing Unit : fine trimming to trim and round no. motors : 2 motor power : 0.27 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 3 Processing Unit : Corner rounding NO. EDGE PROCESSING UNITS 4 Processing Unit : edge scraping NO. EDGE PROCESSING UNITS 5 Processing Unit : glue scraping Control system PLC Safety standard CE mark Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight ap ...

Description: Max. panel height 55 mm Min. edge thickness 0.4 mm Max. edge thickness 12 mm Max. forward feed speed 13 m/min Pressure with idle wheels NO. PANEL SIZING / MILLING UNITS Unit : pre-milling unit automatic timed intervention motor power : 2.2 KW Edge coil magazine glue pot for EVA hot melt glue premelter for EVA hot melt glue Roller set to press the edge no. pressure roller 4 NO. EDGE PROCESSING UNITS 1 Processing Unit : end trimming no. motors : 2 automatic timed intervention motor power : 0.35 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 2 Processing Unit : fine trimming to trim and round no. motors : 2 motor power : 0.55 KW r.p.m. : 11300 RPM NO. EDGE PROCESSING UNITS 3 Processing Unit : Corner rounding no. motors : 2 motor power : 0.4 KW NO. EDGE PROCESSING UNITS 4 Processing Unit : glue scraping NO. EDGE PROCESSING UNITS 5 Processing Unit : buffing no. motors : 2 motor  ...

Description: Type of edging Thin edge Thick edge Solid wood Gluing System EVA Hotmelt Max feed speed 9 m/min Maximum panel thickness 50 mm Operating Units 4 nr Min. panel height 8 mm Max. panel height 50 mm Min. edge thickness 0.4 mm Max. edge thickness 3 mm Max. forward feed speed 9 m/min Top pressure yes Pressure with idle wheels Panel support guides yes Edge coil magazine yes no. positions 1 Gluing system yes glue pot for EVA hot melt glue yes Roller set to press the edge yes no. pressure roller 3 No. Edge Processing Units 3 NO. EDGE PROCESSING UNITS 1 Processing Unit : end trimming no. motors : 2 motor power : 0.18 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 2 Processing Unit : fine trimming to trim and round no. motors : 2 motor power : 0.27 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 3 Processing Unit : glue scraping Safety standard CE mark yes Total installed power 3.5 KW  ...