single spindle lathe used for sale

Equipped with emergency stop button, bottom and top blade extraction 80 - 100 mm, milling guide with mutual left and right fine adjustment of the guides, with motor brake, with thermal motor protection. Auction-ID: A1-48994-3

With emergency stop button and door lock switch. Milling spindle 40 mm, speed 3000-4500-7500-9000 with led indication. Left with table top extension of 500 mm, right with a narrower table extension of 670 mm. The total table top width is then 2200 mm With automatic star triangle start switch and with motor brake. Handwheel for height adjustment is rotated with a rotation, the milling spindle 1 mm up. The milling plate guide can be adjusted numerically at two points independently left and right. The milling plate guide can also be adjusted numerically readable forwards and backwards The machine has top and bottom top extraction of 120 mm. pneumatic spindle lock. Thermal motor protection and an adjustable bump bar for plunge work and can be set up left and right. Equipped with Univer supply device type 508, built in 1996, Motor 380 volts 0.75 Kw. three rubber feed rollers D= 10 ...

Equipped with emergency stop button, bottom and top blade extraction 80 - 100 mm, milling guide with mutual left and right fine adjustment of the guides, with motor brake, with thermal motor protection. Feeder type SK32FD, Motor 380 volt, 0.25hp, Year of construction 1994, 8 feed speeds, Rubber feed rollers 80 x 55 mm. Auction-ID: A1-48994-19

With emergency stop button and door lock switch. Milling spindle 40 mm, speed 3000-4500-7500-9000 with led indication. Left and right with table top extension of 500 mm per side. The total table top width is then 2030 mm. With automatic star triangle start switch and with motor brake. The milling spindle can be tilted from -10 to + 45 degrees. Handwheel for height adjustment is rotated with a rotation, the milling spindle 1 mm up. The milling plate guide can be adjusted numerically at two points independently left and right. The milling plate guide can also be adjusted numerically readable forwards and backwards The machine has top and bottom top extraction of 120 mm. pneumatic spindle lock. Thermal motor protection and an adjustable bump bar for plunge work and can be set up left and right. Equipped with Holzher feeder type ETX, 380 volt, Motor 0.75 Kw, heavy version with 3 ...

1.5kw, 1420 rpm. With two abrasive hedgehogs, one piece D = 150 mm H = 120 mm, and one piece D = 100 mm H = 120 mm. Auction-ID: A1-48994-47

Martin T25 tilting table spindel moulder with 2-axl electric positioning Manufacturer: Martin Type: T25 M-Nr.: V172604 Year: 1990 Motor: 5/6 kW (2 RPM drive motor) Tilting: -5° – +45° Spindle diameter: 30 mm Spindle elevation: 150 mm (electrical adjustment) Rotation speed: 3000/4500/6000/9000 U/min (2 RPM drive motor) Spindel pick-up: MK5 Table: Table extension 2.500mm with extendable support (pull-out for wide workpieces) Softstarter: Automatic spindel softstart/- braking Control panel: Eye-level with digital read-out Spindel elevation: 150 mm elelvation electric with digital read-out Spindle tilting: ‘-5° – +45° Electric with digital read-out Feeder: Five-pole socket via central control Condition: Fully functional Optional: Aanvoerapparaat: Not included Aigneraanslag: Not included

CASADEI F114 spindle moulder Manufacturer: Casadei Type: F114 M-Nr.: 01-66-183 Year: 2001 Control: Spindelhoogte: handwiel verstelbaar met digitaal-analoge uitlezing Freesaanslag: handwiel met digital-analoge uitlezing Frees aanlag invoerzijde: handwiel verstelling met digitaal-analoge uitlezing (spaanafname)

Martin T26 tilting table spindel moulder with 2-ax control and 7.5 kW frequency controlled spindle RPM Manufacturer: Martin Type: T26 with 7.5 kW frequency controlled spindle RPM Machine Nr.: 20000 Year: V415216

Martin T26 tilting table spindel moulder with 2-ax electric control and 7.5/9.5 kW 2-speed motor Manufacturer: Martin Type: T26 M-Nr.: 2005 Year: V453599 Control: electrical spindel-elevation, -tilting,-feeder elevation, manual fence positioning with digital reading Control panel: machine stand Motor: 7.5/9.5 KW 2-speed motor rpm Spindel : ø40 mmSK40 plus Dornfix-quick change system Tilting: Tilting from -45 to + 45° Spindle elevation: Electric spindle elevation 150 mm; quick- and slow speed Electro-pneumatic spindle fixation for safe and easy tool change Central greasing (long life greasing) Rotation speed: 2-speed motor 7.5/9.5 kW Spindel pick-up: SK40 Dornfix quick change system Table: 1255 x 900 x 95 mm from cast iron Ax-control: 1. Digital-electric controlled spindle height setting, with automatic milling dept. Compensation when spinlde is tilted 2. Digital-electric controlled spi ...

Martin T21 Manufacturer: Martin Type: T21 Year: Motor: 4 KW Table: 1.000930 Table height: 850 mm Konus spindle: MK5 Spindel height adjustment: 150 mm RPM: 3000/4500/6000/9000 U/min Spindle: 40 mm Max. tool diam.: 250 mm Weight: 700 KG Brake: Footbrake Dust collection: ø120 ø100 mm

Martin T25 tilting table spindel moulder with 5-axl CNC control Manufacturer: Martin Type: T25 M-Nr.: V252368 Year: 1998 Motor: 7.5/9.5 kW oder 10/13 BHP, 2 RPM Dalander motor Tilting: -5° till +45° Spindel diam.: 30 mm Spindel pick-up: ISO-quick change Spindel elevation: Spindle height adjustment: 150 mm Rotation speed: 3000/4500/6000/9000 U/min Table: Table extension 2.400mm with extendable support (pull-out for wide workpieces) Control panel: CNC control at eyes height with LCD screen Spindel elevation: CNC-controlled with electric elevation (programm controlled of hand switch setting) Spindel tilting: CNC-controlled with electric tilting, angle: -5° +45° (programm controlled of hand switch setting) Fences: CNC-controlled with electric positioning vs. spindel position (programm controlled of hand switch setting) CNC-controlled with electric positioning infeed vs. outfeed fence (pr ...

MARTIN T27 FleX with 4-ax CNC control + 5-ax manual controlled but integrated in central control + electric feeder elevation Year: 2007 Tilting: from -46° to +46° T27FX/1-a: T27 FleX tilting spindle moulder CE-norm with 7,5KW/10 HP motor and variable speed – frequency controlled CNC controlledspindle elevation CNC controlled tilting with automatic height adjustment when tilted T2704-a: Motor 9,5KW/13 HP motor and variable speed – frequency controlled rpm 1.000 – 12.000 tpm., incl. collission control T2711-a: Infeed fence manually controlled with digital counter, whereas position is integrated in central control linked T2712-a: CNC controlled fence positioning (left& right hand-side combined) T2714-a: CNC controlled table opening (programm integrated for tools Ø70 upto 250 mm T2715-a: Electric controlled feeder elevation-product thickness T2731-a: Table extension at infeed-outfee ...

Martin T26 tilting table spindle moulder with CNC 4-ax control Manufacturer: Martin Type: T26 CNC Year: 2002 Control: 4-ax CNC Control Control panel: eye-level Remark: Special paint Martin 75 Years Ral 7035& 6004 Motor: 7.5/9.5 kW – twin-speed motor Tilting: -45 tot + 45° Spindel diam.: ø40 mm spindel SK40 – Dornfix-quick change Spindel elevation: Electric spindel elevation 150mm (2 speed) Spindel elevation Electric-pneumatic spindel lock (Tool changing) Central greasing Rotation speed: Twin-speed 3000-6000 rpm or 4.500-9000 rpm, electronic display, electric -automatic brake Spindel pick-up: Dornfix-quick change spindel Table: Table extension, infeed and outfeed 2405mm long, frontside support 3000mm long, frontside extension 700mm Control panel: 1. CNC-controlled spindel elevation, with automatic dept and height control when spindle is tilted 2. CNC-controlled spindel tilting, with ...

Panhans 245 Easy Tilting spindlemoulder Manufacturer: Panhans Type: 245 Easy M-Nr.: 3003 Year: 2008 Control: 2-ax electrical controlled, spindle elevation and -swivelling, Handwheel controlled rearfences vs. spindel with digital counter reading and handwheel controlled right vs. left fence setting with digital counter. Control panel: Eye level, ergonomic turning Remark:

Martin T26 tilting table spindel moulder with 2-ax control and 7.5 kW frequency controlled spindle RPM and tenon table Manufacturer: Martin Type: T26FleX M-Nr.: 2000 Year: V409217 Control: Control at eye level: spindel-elevation, -tilting, infeed fence positioning, rpm-setting Control panel: Panel at eye-level, swivelling for operator comfort Motor: 7.5kW (10 BHP) with frequency controlled motor rpm Spindel : SK40 plus Dornfix-quick change system Tilting: Tilting from -45 to + 45° Spindle elevation: Electric spindle elevation 150 mm; quick- and slow speed Spindle elevation referencing tool 0-position Electro-pneumatic spindle fixation for safe and easy tool change Central greasing (long life greasing) Rotation speed: Frequency controlled 7.5 kW Spindel pick-up: SK40 Dornfix quick change system Table: Table ext6ension infeed side and tenontable outfide, that can also be used as table ext ...

Martin T26 tilting table spindel moulder with 2-ax control and 7.5 kW frequency controlled spindle RPM Manufacturer: Martin Type: T26 M-Nr.: 2000 Year: V415216 Control: Control at eye level: spindel-elevation, -tilting, infeed fence positioning, rpm-setting Control panel: Panel at eye-level, swivelling for operator comfort Motor: 7.5kW (10 BHP) with frequency controlled motor rpm Spindel : SK40 plus Dornfix-quick change system Tilting: Tilting from -45 to + 45° Spindle elevation: Electric spindle elevation 150 mm; quick- and slow speed Spindle elevation referencing tool 0-position Electro-pneumatic spindle fixation for safe and easy tool change Central greasing (long life greasing) Rotation speed: Frequency controlled 7.5 kW Spindel pick-up: SK40 Dornfix quick change system Table: Table length 2.40 mm, width: 700 mm front-side extendable Achs-control: 1. Digital-electric controlled spin ...

MARTIN T27 FLEX tilting table spindle mouder: +/- 46º plus 2 CNC controlled axes Brand: Martin Type: T27Flex M-Nr.: V528804 Year: 2014 Specifications: Frame: Composite structure: Steel outer walls filled with a steel-concrete composite structure providing the best stability, stiffness ande high vibration absorption capabillities Weight: ca. 1.450 kg Table dimensions: 1255 x 900 x 95 mm., cast-iron Working height: 900 mm Tool opening-table: 255/205/161/106/74 mm. diam. Tools with max diam. Ø 250 mm (max. 150 mm. when tilted 45º) under table level elevation RPM: 3.000, 4.000, 5.000, 6.000, 8.000, 10.000 rpm RPM-adjustement: Frequency controlled Control panel at eye level, turning for highest operator comfort Control: PowerPC-controll industrial controll, equipped with Linux TFT Touchscreen Controll panel with 216 colours), CAN-controlled servo-motoric driven axes for highest repeatabili ...

Paoloni T140 table spindlemoulder Manufacturer: Paoloni Type: T140 Motor: 5 KW Spindle diameter: 30 mm Spindle elevation: 140 mm Rotation speed: 3000-4500-6000-9000 Spindel elevation: Handwheel with analog clock Feeder: HolzHerr 3 rollen Fence: Aigner integraal aanslag Condition: fully functional

Martin T25 Schwenkspindelfräse mit 2 Achs-elektrische Verstellung Marke: Martin Typ: T25 M-Nr.: V175170 Baujahr: 1990 Motor: 5/6 kW Schwenkung Frässpindel: -5° – +45° Fräsdorn: 30 mm Spindelhöhenverstellung: 150 mm (elektrische Einstellung) Drehzahlen: 3000/4500/6000/9000 U/min (2 Drehzahlmotor) Konus der Frässpindel: MK5 Softstarter: Automatischer Frässpindel-Anlauf/-bremsung per Drehknopf Systemsteuerung: Unteres Spindelverstellung: Elektromotorhöhenverstellung mit Analog-Auslesung Schrägstellung -5° – +45°: -5° – +45° Elektromotorschräge mit digitaler Lesart Fräsanschlag: Aigner Intergraal Anschlag Zustand: Voll funktionsfähig getestet

Code: 0481 Brand: VITAP Model: BM 13/S - CE Standard Multiple boring machine with 13 spindles for furniture, carpentry, panels, kitchens, bathroom cabinets and various - CE Standard Technical data: N°13 spindles Center-to-center distance between spindles 32 mm Total center-to-center distance between the first and last spindles 384 mm Table dimensions 600 x 400 mm Max drilling depth 70 mm Min spindle speed 2800 rpm Motor power 1,5 Hp Compressed air pressure 6/8 atm Overall dimensions mm 750 x 560 x 1200 h Weight kg 160

Maggi Boring System 46 Maggi Engineering Boring System 46 professional multi-spindle drilling machine for the series drilling of wooden panels and elements for furniture production and interior design. Brand: Maggi Engineering Model: Boring System 46 Type: Multi-Spindle Drill / Trunnion Drill 46 pins 2 Drilling Groups Horizontal and vertical drilling Independent adjustment of the 2 vertical units Multiple top pneumatic pressers Pneumatic positioning and clamping Aluminum tables and guides with graduations Manual adjustments with graduated scales Two mechanical positioning counters Separate controls for groups 1 and 2 On/off controls Emergency stop Pneumatic connection Three-phase industrial power supply Robust construction on metal frame Numerous tool holders/bits present on the machine Machine suitable for carpentry, cabinetmaking, furniture manufacturing and seri ...

faceplate diameter: 3200 mm swing diameter: 5100 mm turning height: 2505 mm cross rail - adjustment: 1500 mm max. ram stroke: 1250 mm slide adjustment: 2000 mm control: Siemens 8 T tool changer: 16 STK table load: 60 t faceplate turning speed range -stepless-: 0,8-100 U/min feed: 0,0 1-1000 mm/min rapid traverse: 6000 mm/min drive of main spindle: 75 kW weight of the machine ca.: 70 t dimensions of the machine ca.: 9,3 x 6,1 x 6,0 m machine is in an excellent condition with div. acessories (photos available) machine can be equipped with latest electrics and Siemens CNC control SINUMERIK 840D sl for additional costs. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 1250 mm swing diameter: 1160 mm turning height: 800 mm faceplate diameter: 1000 mm total power requirement: 97 kW weight of the machine ca.: 25000 t dimensions of the machine ca.: m P I T T L E R (Germany) CNC Controlled Vertical Turning and Milling Centre With Tool Changer and Pallet Changer Model PV 1250 / 1-1 Year 1994 _______________________________________________________ Turning Ø max. 1,000 mm Swing Ø max. 1,160 mm Turning length 800 mm X Axis - horizontal 1,300 mm Y Axis - vertical 800 mm Feed / quick feed 16,000 mm/min Main spindle speeds 10 - 1,000 rpm ! Main spindle speeds via separate C Axis 0.1 - 16 rpm Positioning accuracy of C Axis 360° + / - 5 Tool holder ISO 50 Tool drive 22 kW Max. torque / spindle speed 315 Nm / 2,500 rpm Pallet size 630 x 630 mm Spindle drive 63 kW Total electrical load 97 kW - 400 V -  ...

UNIQUE AND INDIVISIBLE LOT – 78 METALPROFI AUSTRIA METAL MACHINE TOOLS, new, never put into service, in original crates. 21 references. Cumulative catalogue RRP 167 976 € excl. VAT. METAL LATHES / COMBINED – 38 machines • 16x WM180V-MONO – 300 Needle Spacing, Machinable Ø 180 mm, 50-2550 rpm, CM3, 600 W, 7 Carbide Tools + 3-jaw Chuck Ø100 • 5x WM210V-MONO – EP 400, Ø 210 mm, same equipment • 4x JY250VL-F-MONO + 3x JY250VL-F-DIGI – EP 750, Ø 250 mm, 50-2000 rpm, MK4, 750 W, 2-axis view (DIGI) • 2x S1100K-DIGI \"SUPER 1100 Professional\" – EP 1100, Ø 330 mm (460 broken bed), 70-2000 rpm, 8 speeds, MK5, 1500 W, 600 kg, 3-axis visu, 3-jaw chucks Ø160 + 4 jaws Ø200, scopes, chainring Ø250, high-speed turret, housing • 3x CJM280/815-MONO + 2x CJM280/815-TRI – EP 815, Ø 280 mm, 12 speeds 45-2000 rpm, MK5, visu, speed turret, scopes, 3 and 4 jaw chucks  ...

faceplate diameter:1400 mm swing diameter:2000 mm turning height:1500 mm main drive:80 kW faceplate speeds from - to:1 - 365 U/min milling motor:37 kW ram head dimension:240 x 240 mm max. ram stroke:1250 mm total power requirement:133 kVA weight of the machine ca.:50 t dimensions of the machine ca.:11 x 5 x 6,4 m Machine was overhauled in 2008 by OEM New control CNC SIEMENS 840 D automatic tool changer 72-pcs C-axis with driven tools Angle-, straight tool holders with CAPTO holder Coolant device Chipconveyour

faceplate diameter:1800 mm swing diameter:2000 mm turning height:1170 mm z-axis:1000 mm cross rail adjustment - vertical:800 mm faceplate speeds::2,5 - 280 workpiece weight:12 t feeds:1 - 6000 mm/min max. torque on the faceplate:50000 Nm total power requirement:85 kW weight of the machine ca.:41 t dimensions of the machine ca.:5,6 x 4,8 x 4,6 m Machine retrofit and overhould in 2005 with SIEMENS 840 D powerline control - 6 jaw hydraulic power chuck - tool changer for 12 tools - chip conveyor, coolant attachment, splash housing - various tool holders

faceplate diameter:1000 mm swing diameter:1600 mm turning height:1200 mm main drive:75 kW faceplate speeds from - to:7 - 800 U/min milling motor:25 kW milling head speed:7 - 3000 U/min milling spindle - taper:ISO 50 cross rail adjustment - vertical:800 mm ram head dimension:240 x 240 mm weight of the machine ca.:40 to dimensions of the machine ca.:9 x 7,8 x 6,0 m Machine general overhould in 2004 and equiped with Siemens 840 D control - tool changer rack magazine - C-axis, live tooling, - Transmit function electronical Y-axis - angular milling head - complete splash housing - coolant device, chip conveyor

faceplate diameter:1400 mm swing diameter:2000 mm turning height:1270 mm main drive:80 kW faceplate speeds from - to:1 - 355 U/min max. workpiece weight:6.000 kg milling motor:37 kW milling head speed:7 - 3000 U/min milling spindle - taper:ISO 50 cross rail adjustment - vertical:800 (8 x 100 mm) mm ram head dimension:240 x 240 mm max. ram stroke:1250 mm weight of the machine ca.:50 to total power requirement:133 kVA dimensions of the machine ca.:11 x 5 x 6,4 m Machine general overhould in 2008 and equiped with CNC SIEMENS 840 D control - tool changer for 72 tools - C-axis, live tooling - angular- and straight tool holder head with CAPTO taper - Transmit function - complete splash housing - coolant device, chip conveyor - diverse accessories

faceplate diameter:1600 mm swing diameter:1800 mm turning height:1500 mm max. ram stroke:1200 mm faceplate turning speed range -stepless-:2,5 - 250 U/min workpiece weight max.:10.000 kg ram head dimension:240 x 240 mm feed range:1 - 3000 mm/min power capacity:45 kW weight of the machine ca.:20 t modernized and overhauled in 2010 with CNC SIEMENS 840 D 12 positions automatic toolchanger telescopic covers splash guarding chip conveyor coolant attachment diverse toolholders

faceplate diameter:1400 mm swing diameter:1470 mm turning height:1325 mm ram stroke range:750 mm adjustment of cross-rail:850 mm max. workpiece weight:12000 kg faceplate turning speed range:4,5 - 224 U/min feed per revolution:0,06 - 8 mm rapid speed:1,8 m/min total power requirement:50 kW weight of the machine ca.:16 t Machine was modernized in 2008 with new electric 2-axes digital readout 5-station turret head autom. swivelling diverse toolholders

Technical data: Clamping opening max.: 850 mm (950 mm) Clamping claw opening max.: 620 mm Output of the main voltage: hydraulic Cutting length: 6000 mm Number of clamping planks: 4 stubble - Incl. new running rails - stiffened in profl steel construction with cross-beams - Single buck adjustment - Cutting staer adjustment, multi-chain drive and ball-bearing connection shaft by electr. Positioning drive. - Automatic lubrication for saemt rails and Guides. - Low wear and high adjustment speed due to central hydraulic clamping claw adjustment with automatic Clamping pressure reduction in case of retracted clamping claws - Trunk can be in the tense state in the Laengaxis to be aligned - Cutting of conical timber or cutting parallel to the Tree edge possible - 3 pairs of regular turners "Quick Turner" - Wheel mount directly connected to clamping buck bottom, thus  ...

Iddon Cold Feed Extruder. 2.5" screw dia. 10/1 LD Ratio. Motor Size 20.4/5.5 HP

Accessories

intake cross section: 2500 x 1,700 mm motor power: 160 kW rotor flight circle: 670 mm rotor execution: cutting inserts on tool holders counterknife: with cut gap adjustment machine weight: approx. 24,000 kg

Used single stage homogeniser made by Hoyer Pack. Capacity 600 L/H. Bal type valve. 6.5 KW motor. Set of seales and plungers ware changed lately. New 1996.

Technical data: Nominal power 600 kg/h Power: Drive engine 0.75 (1.02) kW (hp) Brush cleaning 0.37 (0.5) kW (hp) High-pressure cleaner 4.7 (6.4) kW (hp) Electric connection 400V 50Hz (3 phases) Electrical protection 16 A Dimensions: Length 1 825 mm Width 1 085 mm Height 1 290 mm Discard or drop-in height 1 290 mm Bandwidth 420 mm Order width 300 mm Order height 10-50 mm Weight (ribbon press) 550 kg Material 1,4301/AISI 304 Juice yield 70% Ribbon speed (infinite) 2.1-5.5 m/min Transcourse time 0.4-1 min Water connection at least G 1/2, "min 12 l/min Height juice drain 305 mm Height Trester ejection 780 mm Can be used for nuclear and stone fruits Included high pressure cleaner, compressor

From checkweigher to filling scale The 1-head scale is the most cost-effective solution for partially automating manual filling. With a reproducible accuracy, the filling speed can be significantly increased. Characteristics of the scale • Easy to use • Quick and easy cleaning • Tool-free (dis)assembly of all product-carrying format parts • Low maintenance • The surface is made of stainless steel • Equipped with automatic vibration • New modular control system • infinitely variable vibration system for an optimal production flow • High accuracy Specifications • Number of weighing containers: 1 • Volume weighing container: 4.5 liters • Bunker volume: 20 liters • Weighing range infinitely adjustable between 20 and 1,000 grams • Accuracy: 0.5-3g depending on the product • Speed: up to 15 weighings per minute, depending on product, adjustme ...

380 V, 50 Hz, 0.37 kW, interference test 18 W

Used MAX DROP single head shortcake machine. IMPORTANT: the machine was equipped with a bar for lubricating the tops of the dough with fruit filling. Manufacturer HASBORG Rakszawa Poland Year of production 2007 CE mark MAXDROP is a technologically advanced, multifunctional and single-head machine designed for the production of cakes. The machine is adapted to work with steamed, shortcrust, coconut, meringue, sponge cake or muffins with pieces of fruit. Its purpose is to dispense many types of cakes, such as single-color cakes, meringue, spice cakes, coconut cakes, dumplings, matzahs or puff straw and sponge cake tops. MAXDROP is equipped with a head that allows working with semi-liquid and hard cakes. Special rollers, which have milled notches, are mounted in the head. The speed of the rollers is adjustable. Part of the standard equipment of the machine is a bar with rotatin ...

Collar shelving, single-sided, 3 m height, 1, 20 m arms, 500 kg per arm - Neuware -: Price from site including loading! 1 shelf unit with 4 stand EUR1.150.-(net)! A cantilever rack system, hot-dip galvanized, consisting of: Shelf stand on one side approx. 3,000 mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 adjustable shelf arms Load capacity at load Centre 600 mm 500 kg each arm / 2250 kg per stand with 4 studs per arm tier 4 x 500 kg = 2,000 kg with longitudinal and diagonal associations e = 1300 mm When a shelf set with 4 stands approx. 4000 mm long with all bolts and nuts, without ground anchor.

ZRVL-300 M single-stage oil-lubricated rotary vane vacuum pump 3-phase, 7.5kW 300m3/h The vacuum pump purchased for a project and then not used is available unused/as good as new Overview technical data ZRVL Type: M300E - Pumping speed: 300 [m3/h] - Ultimate pressure: 0.1 [mbar abs] - Final pressure gas ballast 0.7 [mbar abs] - Voltage 50 Hz: 230/400 V - Motor 50 Hz: 7.5 kW - H2O compatibility: 5.7 kg/h - Oil volume: 6.5 l - Weight: 200 kg - Sound pressure level: 70 dB (A) Accessories/equipment for the ZRVL series: Inlet filter with filter cartridge made of polyester or stainless steel Oil level switch Inlet pressure gauge Oil temperature switches or transmitters Oil trace heating for outdoor installations with high steam loads (open-cast mining or construction site operation) Versions for oxygen applications Monitoring system for monitoring the conditi ...

vertical belt coil mixer for the food industry in stainless steel Usable volume: 600 litres Cylindrical mixing container with conical transition to the outlet Mixing unit, vertical belt coil circulating in the mixing container Drive mixing unit Geared motor make-up North 7.5 kW, at 61 min-1 as a plug-in gearbox with hollow shaft Engine efficiency class IE3 Shaft sealing due to high-quality shaft sealing rings Feeding with sack hook and support grid Outlet with flat slider in stainless steel hand-operated with knife head 4 kW at 1500 min-1 with liquid addition lance with basic frame On request with control for additional price

Machine name: BI Pack Manufacturer: OPEM Year of construction: 2006 max speed/power: 200 pads / minute Dimensions: approx. 2m x 2, 3m height: 2m Weight: 1000kg Power supply: 400 v & 50 Hz Compressed air consumption: 0,6MPa Detailed machine function: new double Schlachbeutelmaschineum to for example: coffee pods individually through print mark control in foil to pick. Each bag can be individually printed by the attached printer. 2 seperate treadmills incl. Counter is also available. PLC manufacturer/model: OMRON more info: new price â?¬120,000

Description: Hydraulic single-column press with cycle feed Type: HEP 100 Specifications Electrical connection: 400 volts/50 Hz +/- 3 % Drive power: 5.5 kW Total power requirement: approx. 6.5 kW Control voltage: 24 volts/50 Hz +/- 3 % Hydr. Max. connection: 210 bar Set: 200 bar Performance data Ram speeds AB: approx. 48 mm/sec. at max. 100 kN compressive force Working speed AB reduced adjustable to: approx. 10 mm/sec. at max. 100 kN compressive force Ram speed ON approx. 96 mm/sec. at max. approx. 50 kN retraction force Plunger stroke: max. 200 mm Flow rate of the pump: approx. 15 l/min.

The AutoDoor AD100 is a powerful, electrically operated door opener for CNC machines with a stroke of 1000 mm. The system offers an integrated safety function in accordance with EN ISO 13849-1 PL d and does not require external light barriers or safety edges. Thanks to the standard mounting brackets and Harting connectors, the AD100 can be quickly installed and seamlessly integrated into any CNC machine. Standard features: - Available in 3 different lengths as standard. - Standard brackets for quick and easy installation. - Available with machine-adapted brackets for different machines. - Standard for 180 kg door weight, stronger options available. - Single or double door function. - Can handle different stroke lengths in double-door operation (option). - Fits all CNC machines on the market. - No light barriers or terminal strips are required; the safety function is integrat ...

The AutoDoor AD150 is a powerful, electrically operated door opener for CNC machines with a stroke of 1500 mm. The system offers an integrated safety function in accordance with EN ISO 13849-1 PL d and does not require external light barriers or safety edges. Thanks to the standard mounting brackets and Harting connectors, the AD100 can be quickly installed and seamlessly integrated into any CNC machine. Standard features: - Available in 3 different lengths as standard. - Standard brackets for quick and easy installation. - Available with machine-adapted brackets for different machines. - Standard for 180 kg door weight, stronger options available. - Single or double door function. - Can handle different stroke lengths in double-door operation (option). - Fits all CNC machines on the market. - No light barriers or terminal strips are required; the safety function is integrat ...

Condition: Very good condition Available: Immediately

The AutoDoor AD200 is a powerful, electrically operated door opener for CNC machines with a stroke of 2000 mm. The system offers an integrated safety function in accordance with EN ISO 13849-1 PL d and does not require external light barriers or safety edges. Thanks to the standard mounting brackets and Harting connectors, the AD200 can be quickly installed and seamlessly integrated into any CNC machine. Standard features: - Available in 3 different lengths as standard. - Standard brackets for quick and easy installation. - Available with machine-adapted brackets for different machines. - Standard for 180 kg door weight, stronger options available. - Single or double door function. - Can handle different stroke lengths in double-door operation (option). - Fits all CNC machines on the market. - No light barriers or terminal strips are required; the safety function is integrat ...

Control cabinet, distribution cabinet, control cabinet, TS modular cabinet, profile door -Profile door KTS for: refrigerator -TS single door: 600 x 2000 RAL 7035 -Article No.: 5050154 -Dimensions: 2040/645/H90 mm -Weight: 33 kg

Pneumatic demolition hammer, single-arm hammer, pneumatic hammer, jackhammer, chisel hammer -Number: 3x demolition hammer available -Price: per piece -Dimensions: 360/220/H80 mm -Weight: 6 kg