single rotor used for sale

CNC Machining Center Hedelius Forte 65 Single 1320 Control: Heidenhain TNC 640 Year of Make: 2019 Availability: in stock Internal machine no. 74 Travels: X-axis 1,320 mm Y-axis 650 mm Z-axis 600 mm Total clamping area 1,500 x 650 mm Table load: approx. 1,200 kg Mount: HSK 63 Tool magazine: 65 compartment Spindle speed: 18,000 rpm Drive power: 35 kW Facilities - Inclined bed coolant system 900 l - IKZ 25 bar - Chip conveyors - 1x Rinsing gun - Electronic handwheel

x-travel:800 mm y-travel:400 mm z-travel:350 mm total power requirement:44 kW weight of the machine ca.:8,8 t dimensions of the machine ca.:6,1 x 4,1 x 3,3 m tool taper:HSK63 number of spindle speeds:36-12.000 Number of tools:2 x 21 St. rotary table diameter:1340 mm Texte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht. Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt. Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt. Copyright © 2005-2026, Josef Weber. All rights reserved.

- Manufacturer: Putzmeister - Machine Type: Rotor Concrete Pump - Presumed pump type: Putzmeister R 65 - Flow rate: up to approx. 40 m³/h - Max. delivery pressure: approx. 25 bar - Rotor delivery hose: approx. Ø 125 mm - Drive: electric - Motor power: approx. 45 kW - Voltage / frequency: 400 V / 50 Hz - Hydraulic tank: approx. 100 litres - During inspection, the hydraulic tank appeared to be about half full. - Before commissioning, a service including inspection or renewal of the hydraulic oil is recommended. - Operating hours: Approximately 750 operating hours are noted on a service/maintenance sticker from 2022. - The current operating hours are not known. Since 2022, further operating hours may have been added. - According to the seller, the machine was originally purchased for a project, but not used. - Accessories: The hoses recognizable in the pictures are part of  ...

the machine with two motors each 5.5 kw and blades 40 mm 2 hooks machine complete with hopper and stood and as well as a new control panel

FOR SALE... TAIKO TWO ROTOR SCREW PUMP TO WHOM IT MAY CONCERN WE VE NEW UNUSED TAIKO CSL-600 TWO ROTOR SCREW PUMP AT OUR STOCK THIS PUMP KEEPED AS SPARE PUMP AT TANKER VESSEL. PLS FIND SPEC AT BELOW. SERIAL NO.: NO. A1K6369 TYPPE: CSL-600 CAP: 560 m3/h REV: 1300MÄ°N POWER: 400PS DATE OF MANUFACTURE: NOV 2006 PUMP IS READY TO TRANSPORT AT WARE HOUSE. IF YOU INTEREST PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Abu Ugurluba Best of regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: 90 232 618 03 85 Mobile: 905556084850aliagamarine.com TURKEY

TO WHOMIT MAY CONCERN ; WE VE NEW UNUSED COMPLETE ROTOR AND SHAFT ABB VTR 304 - P11 AT OUR STOCK ADDATIONALY WE VE RECON COMPLETE ROTOR AND SHAFT ABB VTR 304 - P11 COMPRESSOR SIDE AND TURBINE SIDE ARE NEW .. THIS ROTORS ARE FIT FOR BELOW EXHAUST TURBO CHARGER TYPE TYPE ABB VTR 304 P 11 HT 439312 n max 467 n bmax 443 t max 680 t bmax 650 HZTL 428765 P3 EX STOCK. IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

- Rotor shears type MEWA UC 201 - Electric drive 2 x 75 kW - Rotor length: approx. 2 meters - Width of the blades: 70 mm - Weight approx. 50 tons - Incl. chain belt conveyor for discharging the product

Manufacturer: FARMA Product Type: Hydraulic Timber Grapple / Timber Clamp Application: Forestry and timber handling Year of manufacture: 2014 according to the nameplate Max. load: 1,500 kg Max. hydraulic pressure: 175 bar Rotator: Finn Rotor CR300 Series Rotator Year of manufacture: 2013 according to the nameplate Rotator manufacturer: Finn-Rotor Oy, Finland Design: hydraulically operated timber grapple Rotation: hydraulic rotator available Gripper: double-shell gripper construction Drive: hydraulic Hydraulic Cylinder: Available Hydraulic hoses: available Hydraulic couplings: available Suspension: with rotator and joint mount Attachment construction: included in delivery Material: Steel CE marking: available Nameplate: available Condition: used Quantity: 1 piece Scope of delivery: Timber grapple, rotator, hydraulic lines and pictured add-o ...

Shredder UNTHA RS-100 Main shaft speed: 17.3 rpm Auxiliary shaft speed: 28.0 rpm Chopping discs width: 38 mm Drive power 2x55 kW 400 V, 50 Hz Screen perforation round: Ø 25 mm and 80 mm Total weight without base: approx. 12,000 kg Control cabinet with wiring : complete Incl. funnel + pusher and base frame clean machine, checked, always maintained, 1 owner !

Dimensions (L/W/H): 2020x920x1160 mm Weight: 750 kg Total power requirement: 3,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1700x750x1250 mm Weight: 600 kg Total power requirement: 3 kw Control: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2020x920x1160 mm Weight: 680 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DREHER GRANULATOR, Mod. S26 - 41 GF, 410 mm rotor width, 260 mm rotor Ø, 11 kw drive (or lower), control panel, Average throughput rate 250 kg/h, Machine offered totally reconditioned, Suitable to reuse self-produced plastic scraps, installed power - used power in work: about 60-65% : 11 kW, availability: 3 weeks, working width: 410 mm, options available: lower power, capacity: 250 kg/h, conditions: reconditioned with sworn appraisal

Rotor brake, disc brake, electro-hydraulic disc brake, crane brake, disc, drum and storm brakes, overhead crane brake -Manufacturer: Pintsch Bubenzer, rotor brake disc brake unused -Type: SB 23-450x30-80/6 -Braking torque: 1850 Nm -Accessories: incl. 3 sets of replacement burners -Quantity: 2 pieces brake available -Price: per piece -Dimensions: 370/330/H650 mm -Total weight: 105.7 kg/pc.

Titanium angular rotor BECKMAN COULTER 70.1 Ti Fixed angle rotor Max: 70,000 rpm, 450,000 x g Capacity: 12 x 13.5 mL Nominal capacity: 162 mL K Factor: 36 Angle: 24º Maximum tube length: 76 mm Maximum tube diameter: 16 mm For use with H, R, S centrifuges

Fiberlite F18-8x50cy Fixed Angle Rotor THERMO SCIENTIFIC New equipment in its original packaging Thermo reference: 75003663 Capacity: 8 x 50ml Max. speed: 14,500 rpm FCR Max: 24.446 ×g Compatible with the following models: Thermo Scientific Sorvall Legend XT/XF Centrifuges, Sorvall Legend X1, Multifuge X3/X3F, Multifuge X1 and SL 40F

Aluminum angular rotor BECKMAN COULTER JA-25.50 Fixed angle rotor Max: 25,000 rpm, 75,600 x g Capacity: 8 x 50 mL Nominal capacity: 3,000 mL Biosecurity Lid For use with Avanti J Series and J2 Series Centrifuges (except J-21 Series)

Fixed rotor for EPPENDORF T-60-11 microtubes New equipment in its original packaging Year of Manufacture: 2013 Capacity: 60 x 1.5/2.0 mL microtubes Compatibility: Eppendorf 5804 / 5804 R / 5810 / 5810 R Centrifuges Aerosol Tightness: No Max. FCR: 16,435 × g Max. speed: 14,000 rpm Microtubes supported: 1.5 / 2.0 mL

General Description – Frame 5 Gas Turbines (15 Units for Sale) The offering includes fifteen (15) Frame 5 industrial gas turbines manufactured by General Electric, known for reliable performance in power generation and mechanical drive applications. The GE Frame 5 Gas Turbine is a heavy-duty, single-shaft unit designed for continuous operation in demanding environments, with a typical output of approximately 19 MW per unit.

located in the southern region of the Kingdom of Bahrain, the station produces Electrical Power by means of Gas Turbine Technology. Kraft Work Union (KWU) AG (Siemens) of Germany for Phase I, which comprised, 5 (Five) Units of V93.1 Frame Gas Turbine Generators with 50MW production capacity each.

Machine name: Replacement rotor for Alfa Laval Manufacturer: Alfa Laval Type: ALDEC 506 Year of manufacture: - Inner diameter drum: 450 mm Inner drum length: 1,240 mm Material: Stainless Steel Dimensions: Curb weight: 1,000 kg Technical documentation: No Condition: Used good Price: On request

EPPENDORF S-24-11-AT Microtube Free Oscillating Rotor New equipment in its original packaging Year of manufacture: 2021 For EPPENDORF 5427R Centrifuge For 24 microtubes 1.5/2ml With aerosol-tight QuickLock lid Max speed: 16,049 × g (12,700 rpm)

Technical details Type: Electric motor rotor shafts and stator core packs Configuration: - Machined steel rotor shafts - Splined shaft ends - Bearing journals - Keyways and precision shoulders - Laminated electrical steel stator core packs Application: - Industrial electric motor manufacturing - Electric motor assembly - Spare parts inventory - Industrial machinery production Construction: - Precision-machined steel shafts - Laminated electrical steel cores Estimated quantity: - Rotor shafts: Approx. 120–180 pcs - Stator core packs: Approx. 20–40 pcs Dimensions (typical shaft): - Length: Approx. 700 mm - Diameter: Approx. 45 mm Weight: Approx. 12 kg per shaft Condition: New old stock (unused) Observed condition: - No evidence of previous installation - Machined surfaces appear intact - Light surface oxidation from storage only - Stored indoors - Protecti ...

SIGMA 4K15 C refrigerated centrifuge with 3 rotors Model No.: 4K15C Type: Multi-Purpose Refrigerated Centrifuge Temperature regulation from -20°C to 40°C Max speed: 15000 min-1 (RPM) Voltage: 230 V Frequency: 50 Hz Power: 2000W Weight: 124 kg, Dimensions 40.5 х 65 х 68.5 cm, With 3 rotors: Fixed Angle Rotor: 12130 With lid for 30 samples of 1.5 / 2 ml Max. Speed: 15000 rpm with a max RCF of 25 160 x g 2 Oscillating bucket rotors: 11118 for microplate Aerial work platforms 13218 Without adapters Max. Speed: 5700 rpm Tested to 3000 and 4000RPM Cooling unit => OK In very good condition Year of manufacture: 2007

Functional Hydrolic width adjustment option Group / version: A02 / 0700 Identification number: 60404406 GVW: 1,950 kg Permissible axle load: 1,300 kg Permissible support load: 650 kg Drive: Power take-off (PTO) Configuration: 2 rotors Chassis: Wheeled Windrow removal: central Folding: Lifting rotors for transport Marking: CE Auction-ID: A3-46151-35865

Manitou - MRT 2150 Plus, built in 2014 - Internal no. 4170 Max. radius: 18.20 m Overall dimensions LxW without tines: 6.89 x 2.43 m Tine length: 1.20 m Overall height: 3.08 m Endless rotation range (360°) Supports All-wheel drive All-wheel steering Connection for additional devices Automatic component recognition Auction-ID: A1-49356-55

Capacity 380l Load capacity of the oven shelf/floor 25/70 kg Power 6.5 kW, power supply 400V for maximum temperatures 450 °C Year: 2014 other equipment visible on the photos are not a part of the offer Auction-ID: A7-50013-8

FELLA TS 800 Center Rake (Used machine) • Manufacturer: FELLA • Model: TS 800 • Year of construction: 2002 • Working width: 7.60 m • 2-rotor center rake • Trailed version • Hydraulically foldable Equipment: • Center rakes • Lighting system • Warning signs Condition: • Used machine Auction-ID: A1-49580-2222

Deutz-Fahr Condimaster 11041 tedder – 2008 – 11,00 m – 8 rotors Specifications: Brand/type: Deutz-Fahr Condimaster 11041 Year of construction: 2008 Working width: approx. 11.00 m Number of rotors: 8 Tange arms: 7 per rotor Transport dimensions: approx. 11.00 × 2.98 × 3.35 m Weight according to type plate: approx. 2,000 kg Conveyors: 10.0/75-15.3 Trailed version with transport chassis Rating plate: Kverneland 6912 Machine number: 6912-0432 Features: Hydraulically folding and folding work sections Wide-angle PTO Lighting Marking signs PLEASE NOTE: this vehicle has a license plate registration. Dutch registration: LKB-83-G Upon collection, the vehicle must be registered with a third party on site or exported. There are additional costs associated with this. Auction-ID: A1-47389-194

rotor dia:30-500 mm hobbing length:500-1000 mm total power requirement:80 kW weight of the machine ca.:15 t dimensions of the machine ca.:3,6 x 2,5 x 3,0 m max. module:8 Max. module Et milling = 12 Max. module hobbing = 12 Max. axial travel = 110 to 1100mm Max. cutter speed = 300rpm Max. cutter displacement tangential = -350 to -55mm Max. table speed = 100rpm Table drive: torque motor Filter system: chip conveyor is for magnetic materials, belt filter is for all suspended matter that floats in the oil Including milling mandrel

Single-column eccentric press WEINGARTEN type E 40Masch. No. 643/62 Year of construction 1963Pressure capacity 40 ton. Projection 250 mmTable opening 150 x 80 and 200 mmTable area 560 x 460 mmPlunger area 250 x 200 mmPlunger stroke adjustable 8-88 mmPlunger adjustment 63 mmInstallation height 320 mmPin hole 40 mmStroke rate 100/130 strokes / min. Motor power 2.2 / 3 kWNetz connection 400 volts, 50 HzTable height above floor 840 mm- Clutch-brake combination by WEINGARTEN friction threaded coupling with TDC

Technical data: Clamping opening max.: 850 mm (950 mm) Clamping claw opening max.: 620 mm Output of the main voltage: hydraulic Cutting length: 6000 mm Number of clamping planks: 4 stubble - Incl. new running rails - stiffened in profl steel construction with cross-beams - Single buck adjustment - Cutting staer adjustment, multi-chain drive and ball-bearing connection shaft by electr. Positioning drive. - Automatic lubrication for saemt rails and Guides. - Low wear and high adjustment speed due to central hydraulic clamping claw adjustment with automatic Clamping pressure reduction in case of retracted clamping claws - Trunk can be in the tense state in the Laengaxis to be aligned - Cutting of conical timber or cutting parallel to the Tree edge possible - 3 pairs of regular turners "Quick Turner" - Wheel mount directly connected to clamping buck bottom, thus  ...

intake cross section: 2500 x 1,700 mm motor power: 160 kW rotor flight circle: 670 mm rotor execution: cutting inserts on tool holders counterknife: with cut gap adjustment machine weight: approx. 24,000 kg

Iddon Cold Feed Extruder. 2.5" screw dia. 10/1 LD Ratio. Motor Size 20.4/5.5 HP

Accessories

Technical data: Nominal power 600 kg/h Power: Drive engine 0.75 (1.02) kW (hp) Brush cleaning 0.37 (0.5) kW (hp) High-pressure cleaner 4.7 (6.4) kW (hp) Electric connection 400V 50Hz (3 phases) Electrical protection 16 A Dimensions: Length 1 825 mm Width 1 085 mm Height 1 290 mm Discard or drop-in height 1 290 mm Bandwidth 420 mm Order width 300 mm Order height 10-50 mm Weight (ribbon press) 550 kg Material 1,4301/AISI 304 Juice yield 70% Ribbon speed (infinite) 2.1-5.5 m/min Transcourse time 0.4-1 min Water connection at least G 1/2, "min 12 l/min Height juice drain 305 mm Height Trester ejection 780 mm Can be used for nuclear and stone fruits Included high pressure cleaner, compressor

Used single stage homogeniser made by Hoyer Pack. Capacity 600 L/H. Bal type valve. 6.5 KW motor. Set of seales and plungers ware changed lately. New 1996.

380 V, 50 Hz, 0.37 kW, interference test 18 W

From checkweigher to filling scale The 1-head scale is the most cost-effective solution for partially automating manual filling. With a reproducible accuracy, the filling speed can be significantly increased. Characteristics of the scale • Easy to use • Quick and easy cleaning • Tool-free (dis)assembly of all product-carrying format parts • Low maintenance • The surface is made of stainless steel • Equipped with automatic vibration • New modular control system • infinitely variable vibration system for an optimal production flow • High accuracy Specifications • Number of weighing containers: 1 • Volume weighing container: 4.5 liters • Bunker volume: 20 liters • Weighing range infinitely adjustable between 20 and 1,000 grams • Accuracy: 0.5-3g depending on the product • Speed: up to 15 weighings per minute, depending on product, adjustme ...

vertical belt coil mixer for the food industry in stainless steel Usable volume: 600 litres Cylindrical mixing container with conical transition to the outlet Mixing unit, vertical belt coil circulating in the mixing container Drive mixing unit Geared motor make-up North 7.5 kW, at 61 min-1 as a plug-in gearbox with hollow shaft Engine efficiency class IE3 Shaft sealing due to high-quality shaft sealing rings Feeding with sack hook and support grid Outlet with flat slider in stainless steel hand-operated with knife head 4 kW at 1500 min-1 with liquid addition lance with basic frame On request with control for additional price

Collar shelving, single-sided, 3 m height, 1, 20 m arms, 500 kg per arm - Neuware -: Price from site including loading! 1 shelf unit with 4 stand EUR1.150.-(net)! A cantilever rack system, hot-dip galvanized, consisting of: Shelf stand on one side approx. 3,000 mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 adjustable shelf arms Load capacity at load Centre 600 mm 500 kg each arm / 2250 kg per stand with 4 studs per arm tier 4 x 500 kg = 2,000 kg with longitudinal and diagonal associations e = 1300 mm When a shelf set with 4 stands approx. 4000 mm long with all bolts and nuts, without ground anchor.

Machine name: BI Pack Manufacturer: OPEM Year of construction: 2006 max speed/power: 200 pads / minute Dimensions: approx. 2m x 2, 3m height: 2m Weight: 1000kg Power supply: 400 v & 50 Hz Compressed air consumption: 0,6MPa Detailed machine function: new double Schlachbeutelmaschineum to for example: coffee pods individually through print mark control in foil to pick. Each bag can be individually printed by the attached printer. 2 seperate treadmills incl. Counter is also available. PLC manufacturer/model: OMRON more info: new price â?¬120,000

Rod lathes Thiel

Condition: Very good condition Available: Immediately

7 HARRY LUCAS circular knitting machines for the production of endless single jersey tubular fabric, type RR3-1sPL, with fixed cylinder and rotating cambox with following specifications: 1 machine diameter 1 3/4", gauge 10, 56 needles, 1 system 1 machine diameter 2 5/8", gauge 10, 80 needles, 1 system 1 machine diameter 3", gauge 10, 92 needles, 1 system 1 machine diameter 3 1/4", gauge 10, 102 needles, 1 system 1 machine diameter 3 1/2", gauge 10, 108 needles, 1 system 1 machine diameter 3 3/4", gauge 10, 118 needles, 1 system 1 machine diameter 4 1/2", gauge 10, 140 needles, 1 system

Single head INK-JET printer designed for coding and marking fast moving objects on a conveyor without requiring direct contact 1 to 5 print lines -Three possible applications: Mini (2 lines), Midi (4 lines), Maxi (5 lines) -Prints almost any surface -Prints even at high production speed -Pressure height from 1 mm to 15 mm -Various inks are available for special applications

Index HE 25 with rod feed hydraulically controlled with long turning device

Used MAX DROP single head shortcake machine. IMPORTANT: the machine was equipped with a bar for lubricating the tops of the dough with fruit filling. Manufacturer HASBORG Rakszawa Poland Year of production 2007 CE mark MAXDROP is a technologically advanced, multifunctional and single-head machine designed for the production of cakes. The machine is adapted to work with steamed, shortcrust, coconut, meringue, sponge cake or muffins with pieces of fruit. Its purpose is to dispense many types of cakes, such as single-color cakes, meringue, spice cakes, coconut cakes, dumplings, matzahs or puff straw and sponge cake tops. MAXDROP is equipped with a head that allows working with semi-liquid and hard cakes. Special rollers, which have milled notches, are mounted in the head. The speed of the rollers is adjustable. Part of the standard equipment of the machine is a bar with rotatin ...

Food Extruders single and twin screws for various applications : breakfast cereals, corn flake, pet food, full fat soya, snacks We overhaul many models and have in our stocks machines like Clextral BC 45/82, wenger 175 ... also walter single screw. Milin Gentieg cereals Britany, France processing equipments has been specialising for years. We organise deliveries to any destinations for single machines or complete lines from cleaning to flaking and extrusion