single rotor used for sale

Temperature control device Manufacturer: single Temperiertechnik GmbH Type: STO 2-9-42-01 N°: 961599 Kerb weight: 442 kg Engine power: 2 x 2.3 kW Heating capacity: 2 x 9 kW Cooling capacity: 2 x 48 700 watts new condition with operating instructions LWH: 1600 x 600 x 1400 mm

liter capacity: unbkt l coolant: unbkt pressure: unbkt t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cooling capacity: 14.4kW, permissible min./max. temperature TS: +6°C - +20°C, refrigerant: R410A. Chilled water temperature at inlet/outlet: 15°C/10°C, ambient temperature/air inlet: 35°C. Length: 1100mm, width: 750mm, height: 1100, empty weight: approx. 220kg.

Single Single SKA 3 – L Liquid Cooling Original price 5.891,- € Application: All applications that require liquid cooling are served by the cooling systems and equipment of the SKA series. With their own refrigerant circuit and a huge range of cooling capacities, they are used in all industrial sectors Device type: SKA 3 – L Refrigerant: R 134a Cooling capacity: 3,000 W Reference values for cooling capacity specifications: 10°C flow temperature 30°C ambient temperature Temperature range: -5°C to +30°C Equipment: Control unit SBC: Digital display of setpoint and flow temperature, alarm indicators and many other features PT 100 resistance thermometer and sensor breakage protection Stainless steel tank, capacity: 16 liters Corrosion-resistant components (stainless steel/non-ferrous metal) Level monitoring by float magnetic switch High and low pressure ...

General SKU204U935 LocationBarneveld MakeSingle TypeSTW 200/1-24-60-H2.1 Mach.No.120712 Pressure Working pressure20 Bar Main Features Heating (medium)Steam Capacity24 KW Temp.200 °C Specified Features - Temperature control unit Temperating machinecheck Water heatercheck Heating medium:Water Heating capacity24 kW Electric capacity31,1 kVa, 42,3A With coolingcheck (no cooling compressor) Capacity69,6 kW Temperature+10/+200°C Tank capacity25 ltr. With pumpcheck CapacityQmax 200ltr/min, Hmax 80m, 2800 rpm Motor4 kW, 340-690 volt, With temperature controllercheck With controlTouchscreen MaterialMild steel Information Year of construction05-2012 Mounted on wheelscheck With switchcheck CEcheck Floorspace1,60x0,36 m Total height1,32 m Weight309 kg Extra Specificationstest pressure 32,5 barTemperature control unitsSingle TemperiertechnikHeat exchangers > Tem ...

General SKU397M504 LocationBarneveld MakeSingle Temperiertechnik gmbh TypeSTL 1-27-B10/20-TKS6 Mach.No.080137 Main Features Capacity27 KW Temp.90 °C Specified Features - Temperature control unit Temperating machinecheck Water heatercheck Heating medium:water Heating capacity27 KW Electric capacity29 kVA Temperature90 gr.C Motor0,9 KW 400 Volt With temperature controllercheck Information Year of construction2008 Mounted on wheelscheck With switchcheck Floorspace1,1x0,4 M Total height0,9 M Weight120 KGTemperature control unitsSingle TemperiertechnikHeat exchangers > Temperature control unitsBrand > Single Temperiertechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us i ...

General SKU291N360A LocationBarneveld MakeSingle Temperiertechnik GmbH (D) TypeSTO1-18-25-S Mach.No.83918 Main Features Heating (medium)Electric Capacity18 KW Specified Features - Temperature control unit MaterialMild steel Temperating machinecheck Heating capacity18 kW Electric capacity20 kW 380 Volt With temperature controllercheck Information Year of constructionunknown Mounted on wheelscheck With switchcheck Floorspace0,8x0,5 M Total height0,8 M Weight140 KgTemperature control unitsSingle TemperiertechnikHeat exchangers > Temperature control unitsBrand > Single Temperiertechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU204U938 LocationBarneveld MakeSingle TypeSTW 200/1-24-60-H2.1 Mach.No.120711 Pressure Working pressure20 Bar Main Features Heating (medium)Electric Capacity24 KW Temp.200 °C Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck Water heatercheck Electric heatingcheck Heating medium:Water Heating capacity24 kW Temperature+10/+200°C Tank capacity25 ltr With pumpcheck CapacityQmax 200ltr/min, Hmax 80m, 2900 rpm Motor4,0 kW,400-690 volt, 2950 rpm With temperature controllercheck With controlcheck Information Year of construction5/2012 Mounted on wheelscheck With switchcheck CEcheck Floorspace1,6x0,35 m Total height1,32 m Weight310 kg Extra SpecificationsPower 31.1 kVA, 43.3ATest pressure 32.5 bar Machine casing is not present.Temperature control unitsSingle TemperiertechnikHeat exchangers > Temperature c ...

General SKU204U939 LocationBarneveld MakeSingle TypeSTW 200/1-12-25-H2.1 Mach.No.083816 Pressure Working pressure20 Bar Main Features Heating (medium)Electric Capacity12 KW Temp.200 °C Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck Water heatercheck Electric heatingcheck Heating medium:Water Heating capacity12 kW Temperature+10/+200°C Tank capacity24 Ltr. With pumpcheck CapacityQmax 200 ltr/min, Hmax 80m, 2800 rpm Motor400-690 volt, 4,0 kW, 2950 rpm With temperature controllercheck With controlcheck Information Year of construction2008 With switchcheck CEcheck Floorspace1,65x0,32 m Total height1,20 m Weight310 kg Extra SpecificationsPower 18.2 kVA, 26.4A Test pressure 32.5 bar Machine casing is not present. Temperature control unitsSingle TemperiertechnikHeat exchangers > Temperature control unitsBrand >  ...

General SKU204U940 LocationBarneveld MakeSingle TypeSTW 200/1-12-25-H2.1 Mach.No.083817 Pressure Working pressure20 Bar Main Features Heating (medium)Electric Capacity12 KW Temp.200 °C Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck Water heatercheck Electric heatingcheck Heating medium:water Heating capacity12 kW Temperature+10/+200°C Tank capacity24 Ltr. With pumpcheck CapacityQmax 200ltr/min, Hmax 80m, 2900 rpm Motor4,0 kW,400-690 volt, 2950 rpm With temperature controllercheck With controlcheck Information Year of construction2008 With switchcheck CEcheck Floorspace1,6x0,35 m Total height1,32 m Weight310 kg Extra SpecificationsPower 18.2 kVA, 26.4A Test pressure 32.5 bar Machine casing is not present. Temperature control unitsSingle TemperiertechnikHeat exchangers > Temperature control unitsBrand > Sin ...

General SKU204U930 LocationBarneveld MakeSingle TypeChill Advanced C-6-W Mach.No.152170 Pressure Working pressure17 Bar Main Features Heating (medium)Electric Capacity6 KW Temp.30 °C Specified Features - Temperature control unit Temperating machinecheck With coolingcheck Capacity6 kW Temperature-5/+30°C With pumpcheck 3,1m³/h (2x) With temperature controllercheck With controlcheck MaterialStainless steel Information Year of construction2015 Mounted on wheelscheck With switchcheck CEcheck Floorspace1,30x0,65 m Total height1,70 m Weight300 kg Extra SpecificationsPower 11.7 kVA, 16,3A, test pressure 21 bar, refrigerant medium R134a, volume 4,0 kg Temperature control unitsSingle TemperiertechnikHeat exchangers > Temperature control unitsBrand > Single Temperiertechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price com ...

General SKU204U932 LocationBarneveld MakeSingle TypeChill Advanced C-6-W Mach.No.152171 Pressure Working pressure17 Bar Main Features Heating (medium)Electric Capacity6 KW Temp.30 °C Specified Features - Temperature control unit Temperating machinecheck With coolingcheck Capacity6 kW Temperature-5/+30°C With pumpcheck 3,1m³/h (2x) With temperature controllercheck With controlcheck MaterialStainless steel Information Year of construction2015 Mounted on wheelscheck With switchcheck CEcheck Floorspace1,16x0,65 m Total height1,65 m Weight265 kg Extra SpecificationsPower 11.7 kVA, 16.3A, test pressure 21 bar, refrigerant medium R134a, volume 4.0 kg Temperature control unitsSingle TemperiertechnikHeat exchangers > Temperature control unitsBrand > Single Temperiertechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price com ...

General SKU204U931 LocationBarneveld MakeSingle TypeCompact TK-90-6-24 Mach.No.162166 Pressure Working pressure3.8 Bar Main Features Heating (medium)Electric Capacity6 KW Temp.90 °C Specified Features - Temperature control unit Temperating machinecheck Electric heatingcheck Heating medium:Water Heating capacity6 kW Electric capacity380-415 volt, 8,3 kVA With coolingcheck 24kW. no cooling compressor, only external cooling Temperature90°C With pumpcheck With temperature controllercheck MaterialStainless steel Information Year of construction2016 With switchcheck With switchgearcheck CEcheck Floorspace0,80 x 0,27 m Total height0,85 m Weight46 kg Extra SpecificationsMax flow rate 40 l/minTemperature control unitsSingle TemperiertechnikHeat exchangers > Temperature control unitsBrand > Single Temperiertechnik What you can expect from Foeth: -- Machine is in w ...

General SKU204U933 LocationBarneveld MakeSingle TypeAdvanced H2-200-24-116 Mach.No.162077 Pressure Working pressure20 Bar Main Features Heating (medium)Electric Capacity24 KW Temp.200 °C Specified Features - Temperature control unit Temperating machinecheck Electric heatingcheck Heating medium:Water Heating capacity24 kW Temperature+10/+200°C Tank capacity25 ltr With pumpcheck CapacityQmax 200 ltr/min, Hmax 80 m, 2900 rpm Motor400-690 volt, 4,0 kW, 2950 rom With temperature controllercheck With controlTouchscreen MaterialMild steel Information Year of construction2016 Mounted on wheelscheck With switchcheck CEcheck Floorspace1,65 x 0,55 m Total height1,45 m Weight330 kgTemperature control unitsSingle TemperiertechnikHeat exchangers > Temperature control unitsBrand > Single Temperiertechnik What you can expect from Foeth: -- Machine is in working conditi ...

General SKU204U936 LocationBarneveld MakeSingle TypeCompact TK-90-9-50 Mach.No.162167 Pressure Working pressure3.8 Bar Main Features Heating (medium)Electric Capacity9 KW Temp.90 °C Specified Features - Temperature control unit Temperating machinecheck Electric heatingcheck Heating medium:water Heating capacity9 kW Electric capacity380-415 volt, 11,4 kVA With coolingcheck 50kW. no cooling compressor, only external cooling Temperature90°C With pumpcheck Motor1.0kW, 400Volt, 2790 rpm With controlcheck MaterialStainless steel Information Year of construction2016 With switchcheck CEcheck Floorspace0,80 x 0,27 m Total height0,85 m Weight46 kgTemperature control unitsSingle TemperiertechnikHeat exchangers > Temperature control unitsBrand > Single Temperiertechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared t ...

- Arbeitslänge 2500 mm - Arbeitsbreite 1200 mm - Verleimdicke 20 - 60 mm - Anzahl der Ebene 3 - manuelles Drehen - die Pressung ist mit dem pneumatische Zylindern ausgeführt - Anzahl der Zylinder pro Ebene 5 - die Druckzylinder sind fest - Zylindertyp FI 100 x 150 mm - Spezifische Druck 1,8 kg/cm2 - Anzahl der Niederhaltern pro Ebene 2 - jede Niederhalter hat eine pneumatische Zylinder - Typ der pneumatische Zylinder FI 50 x 75 mm - jede Niederhalter hat eigenes Luftventil für Ein/Aus - Druckregulation mit Regulator - max. Druck 8 bar - Parkplatz für den Niederhalter

- Arbeitslänge 2500 mm - Arbeitsbreite 1200 mm - Verleimdicke 20 - 60 mm - Anzahl der Ebene 3 - manuel Drehen - die Pressung ist mit dem einseitigen hydraulische Zylinder ausgeführt - Anzahl der Zylinder pro Ebene 5 - die Druckzylinder sind fest - Zylindertyp FI 50 x 150 mm - Spezifische Druck 6 kg/cm2 - Anzahl der Niederhaltern pro Ebene 2 - jede Niederhalter hat einen pneumatischen Zylinder - Typ der pneumatische Zylinder FI 50 x 100 mm - jede Niederhalter hat eigene Luftventil für Ein/Aus - Druckregulation mit Regulator - Hydraulische Aggregat - Pumpendurchfluss 6,3 l - Leistung der Hydromotor 2 kW - max. Druck für der Hydromotor 30 - 150 bar - Parkplatz für die Niederhalter

COMPACTOR ROTATIV PENTRU CARTON, PLASTIC SI LAZI SAU CUTII DE CARTON Valpak ROTARY COMPACTOR FOR CARDBOARD, PLASTIC AND BOXES OR CARDBOARDS Valpak Brand/Marca TECHVAL Type/Model// Tip/Model VALPAK Putere/Power 4 kW Year of manufacture/an fabricatie 2003 Acustic pressure/nivel de zgomot 59 db (A) Supply voltage/alimentare 380 V triple phase Protection/protectie 16A curve D Sizes/Dimensiuni in cm Coil Weight – Al fins 140x210x280 cm (LxWxH) 1200 kg Amount in stock/pe stoc 1 pc/buc 1 sac rotund de deseu maruntit = 36 baxuri de carton necompactat 1 round bag of shredded waste = 36 containers of uncompressed cardboard 1 sac rotund de carton va avea 300/400 kg, de ladite 300 kg, plastic 200/300 kg 1 round cardboard bag will have 300/400 kg, of said boxes300 kg, plastic 200/300 kg Echipamentul standard are: Celulă fotoelectrică, sistem de debavurare automat, senzor op ...

Description: This forward-looking rotor blade ensures a fast and clean implementation of compost and other bulk materials. The material is taken up like a conventional wheel loader shovel. At the dispensing point, the rotor is started by means of the automatic control. The hydraulic rear panel pushes the material evenly to the rotor in dependence on the rotor speed. The opposite rotor mills off the bucket contents, whereby it is well mixed and loosely dropped. Optimal conditions are thus created for the composting process. Clumps and compactions are reliably dissolved and a well-mixed bulk material is produced. Advantages of using the meetra rotor blade: 1. - Maximum area utilization 2. - Excellent material mixing and loosening allow shortest dwell times 3. - Maximum annual throughput, as regardless of plant length and width 4. - Composting allows for trouble-free rotting c ...

FOR SALE... TAIKO TWO ROTOR SCREW PUMP TO WHOM IT MAY CONCERN WE VE NEW UNUSED TAIKO CSL-600 TWO ROTOR SCREW PUMP AT OUR STOCK THIS PUMP KEEPED AS SPARE PUMP AT TANKER VESSEL. PLS FIND SPEC AT BELOW. SERIAL NO.: NO. A1K6369 TYPPE: CSL-600 CAP: 560 m3/h REV: 1300MÄ°N POWER: 400PS DATE OF MANUFACTURE: NOV 2006 PUMP IS READY TO TRANSPORT AT WARE HOUSE. IF YOU INTEREST PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Abu Ugurluba Best of regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: 90 232 618 03 85 Mobile: 905556084850aliagamarine.com TURKEY

the machine with two motors each 5.5 kw and blades 40 mm 2 hooks machine complete with hopper and stood and as well as a new control panel

; New Diameter: 635mm Height: 590mm

Lobe rotor pump,stainless,acid proof steel,IBEX type NMOG/322,0,75 kW TEO Cap 2957 l/h.

TECHNICAL SPECIFICATIONS Manufacturer: BHS Sonthofen Designation: Pre-ripper Type: VSR 1215 Version: Twin-shaft shredder / rotor shear Year of construction: 2018 Rotor diameter x length: 530 x 1,500 mm Operating hours: approx. 500 h Drive power: 2 x 90 kW Rotor speed (max.): 16 - 37 RPM Nominal torque: 33,000 Nm Number of tearing tools: 8 pcs. Width of tearing tools: 80 mm Total weight: approx. 22,000 kg SPECIFIC COMMENT - Incl. control cabinet/control - Incl. hydraulic pressure unit - Incl. steel substructure - Warranty for approx. 500 Bh - Shredding of domestic, commercial, bulky waste, waste wood, e-waste, plastics,...

TO WHOMIT MAY CONCERN ; WE VE NEW UNUSED COMPLETE ROTOR AND SHAFT ABB VTR 304 - P11 AT OUR STOCK ADDATIONALY WE VE RECON COMPLETE ROTOR AND SHAFT ABB VTR 304 - P11 COMPRESSOR SIDE AND TURBINE SIDE ARE NEW .. THIS ROTORS ARE FIT FOR BELOW EXHAUST TURBO CHARGER TYPE TYPE ABB VTR 304 P 11 HT 439312 n max 467 n bmax 443 t max 680 t bmax 650 HZTL 428765 P3 EX STOCK. IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

Untha RS 100 HD four-shaft shredder. Very good condition. Cutting unit new! With control cabinet and insertion troughs. Drive power 2 x 55 kW. With new 30 mm perforated screen!

Linear motor with rotor LINMOT PS01-23x80-R Product no.: 0150-1233 stroke: max. 780 mm force: max. 44 N Nominal force : 8.6 / 16 N Max. Speed: max. 5.9 m/s stator diameter: Ø 23 mm stator length: 162 mm rotor diameter: Ø 12 mm Runner length: 130 mm (max. 850 mm possible) stator with IP67 connector M17/9(m) used, tested ! Dimensions ( packaging ): 195 x 35 x 75 mm

Three-phase twin-rotor motor, three-phase electric motor, pole-changing motor VEM, ELECTRIC MOTOR PLANT GRÜNHAIN ADW938-A2 0,55 / 0,11 kW 2770 / 450 rpm 220 / 380 V 3AC IP 44 shaft diameter: Ø 12 / 15 mm, fan side: Ø 18 mm wavelength: 18 / 20 mm, fan side: 35 mm groove: 4 x 12 mm, fan side: 6 x 26 mm hole spacing (parallel to shaft): 30 / 88 / 30 mm hole spacing ( transverse to shaft ): 65 mm 8x threaded hole: M5 x 0.8, depth: 15 mm used, tested ! Dimensions: 390 x 205 x 160 mm

T-Rotor Pump, Gear Pump, Trochoid Pump, Feed Pump with Motor NIPPON GEROTOR CO. LTD. AMTP-216HA(VB) Q: 24.3 l/min p: 2.0 MPa ( 20 bar ) n: max. 1500 rpm Input: G3/4 Output: G3/4 Engine: ELQ-8T 1,5 kW 1430 rpm 200 V 3AC spare part for machining center MAZAK AJV25/405 ! used, tested ! Dimensions: 440 x 250 x 185 mm

Plaster pump, monopump, metering pump, high pressure pump, water pump, screw pump, eccentric screw pump, rotor, stator, pump rotors -approx.: 35 stators -approx.: 35 pieces of rotors -Price: complete -Sale: only complete -Dimensions: 1200/800/H450 mm -Weight: including pallet 368 kg

Impeller with pump rotor for magnetic coupling centrifugal pump RICHTER CHEMIE-TECHNIK GmbH RMA 1,5 x 1 x 6 impeller, closed: D175 Material number: 9427-93-1006 diameter: 175 mm, width: 20 mm pump rotor: 50 Nm Material number: 9427-93-3002 Bearing bushing diameter: Ø 45 mm Shaft bushing: Ø 24.5 mm New ! Dimensions: 175 x 175 x 127 mm

Rotor shears with feed hopper and base frame Demonstration machine with only 10 operating hours 2 x 15 kW Cutting unit 600 x 850 mm Rotor shear with hopper and feet demo machine with only 10 working hours 2 x 15kW Cutting chamber 600 x 850 mm

Steam oven, built in 2006, in good condition, fully functional against bid from 76131 Karlsruhe

- Rotor shears type MEWA UC 201 - Electric drive 2 x 75 kW - Rotor length: approx. 2 meters - Width of the blades: 70 mm - Weight approx. 50 tons - Incl. chain belt conveyor for discharging the product

Technical data: Clamping opening max.: 850 mm (950 mm) Clamping claw opening max.: 620 mm Output of the main voltage: hydraulic Cutting length: 6000 mm Number of clamping planks: 4 stubble - Incl. new running rails - stiffened in profl steel construction with cross-beams - Single buck adjustment - Cutting staer adjustment, multi-chain drive and ball-bearing connection shaft by electr. Positioning drive. - Automatic lubrication for saemt rails and Guides. - Low wear and high adjustment speed due to central hydraulic clamping claw adjustment with automatic Clamping pressure reduction in case of retracted clamping claws - Trunk can be in the tense state in the Laengaxis to be aligned - Cutting of conical timber or cutting parallel to the Tree edge possible - 3 pairs of regular turners "Quick Turner" - Wheel mount directly connected to clamping buck bottom, thus  ...

intake cross section: 2500 x 1,700 mm motor power: 160 kW rotor flight circle: 670 mm rotor execution: cutting inserts on tool holders counterknife: with cut gap adjustment machine weight: approx. 24,000 kg

1 factory-tested, well-preserved single-girder ceiling crane Load approx. 3,200 kg Wingspan approx. 6.280 mm Hook path about 12,000 mm Make DEMAG Year of production/workshop testing 1991/2016 with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist approx. 1.3/8.0 m / min Trolley gear approx. 5.0/20,0 m / min Crane chassis approx. 10.0/40.0 m / min

1 neuwertiger, factory-tested single overhead travelling crane with angle trolley Oblique cord stabilization for traverse operation Payload 10.000 kg Span approximately 15,850 mm make VOITH Year of production/workshop test 1995/2016 Lasting only 1 year equipped in a space-saving design with angle trolley and inclined stranding to the load-stabilisation (magnetic control prepared, but not included in the delivery), trolley with frequency control operating speeds, cradle frame, radio remote control: Hoist load approx. 0 8.3 m / min Load approx. 0 22.0 m / min Trolley gear 0-40.0 m / min Crane chassis 0-60.0/90.0 m / min

Iddon Cold Feed Extruder. 2.5" screw dia. 10/1 LD Ratio. Motor Size 20.4/5.5 HP

Used single stage homogeniser made by Hoyer Pack. Capacity 600 L/H. Bal type valve. 6.5 KW motor. Set of seales and plungers ware changed lately. New 1996.

Accessories

1 factory-tested ceiling crane girder Lifting capacity 3000 kg Wingspan approx. 6,800 mm Hook way approx. 8,000 mm Make MAN GHH Year of production/workshop testing 1988/2016 equipped monorail trolleys, short type, freely movable floor control Working speeds: Hoist around 0.8/8.0 m / min Trolley gear approx. 4.0/16.0 m / min Crane chassis approx. 8.0/32.0 m / min

1 factory-tested, very well-preserved single-girder crane Lifting capacity 3,200 kg Span approximately 6,000 mm hook path Max 12,000 mm Make DEMAG Year of production/workshop test 1993/2016 with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist CA. 1.0/6.3 m / min trolley gear approx. 14.0 m / min crane chassis 10.0/40.0 m / min

1 factory-tested, very well-preserved single-girder crane with angle trolley load approx. 4,000 kg Load trolley CA 5,000 kg Wingspan approx. 7.100 mm Make steel Year of production / workshop testing 1986/2016 Crane radio control equipped with angle trolley for a perfect hook road, Working speeds: Hoist 0.5/3.25 m / min Trolley gear approx. 5.0/20,0 m / min Crane chassis approx. 10.0/40.0 m / min

1 factory-tested single girder overhead travelling crane lifting capacity 5000 kg Span around 10,000 mm Hook way max. 5.000 mm Make steel Year of production/workshop test 1983/2016 Crane equipped with steel monorail trolley, freely movable floor control Working speeds: Hoist 0.5/3.4 m / min Trolley gear 16.0 m / min Crane chassis 4.0/16.0 m / min

Technical data: Nominal power 600 kg/h Power: Drive engine 0.75 (1.02) kW (hp) Brush cleaning 0.37 (0.5) kW (hp) High-pressure cleaner 4.7 (6.4) kW (hp) Electric connection 400V 50Hz (3 phases) Electrical protection 16 A Dimensions: Length 1 825 mm Width 1 085 mm Height 1 290 mm Discard or drop-in height 1 290 mm Bandwidth 420 mm Order width 300 mm Order height 10-50 mm Weight (ribbon press) 550 kg Material 1,4301/AISI 304 Juice yield 70% Ribbon speed (infinite) 2.1-5.5 m/min Transcourse time 0.4-1 min Water connection at least G 1/2, "min 12 l/min Height juice drain 305 mm Height Trester ejection 780 mm Can be used for nuclear and stone fruits Included high pressure cleaner, compressor

1 factory-tested, very well preserved single girder crane angle load approx. 5,000 kg Wingspan approx. 10,000 mm Hook path about 7,500 mm Make steel Workshop examination 2016 Floor control equipped with angle trolley for optimal hook path, freely movable working speeds: Hoist approx. 0.8/5.0 m / min Trolley gear approx. 5.0/20,0 m / min Crane chassis approx. 4.0/16.0 m / min

1 factory-tested, well preserved double girder crane Load capacity 5000 kg Span width 14.780 mm Hook path maximum approx. 8,000 mm Make RÖTTGER/Demag Workshop examination 2016 Floor control freely movable with DEMAG double girder trolley, Working speeds: Hoist approx. 0.8/8.0 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

1 plant be certified, very well received. Single girder overhead travelling crane with angle trolley Load approx. 5,000 kg Wingspan approx. 16.750 mm hook path maximum approx. 8,000 mm Make VOITH Year of production/workshop test 1993/2016 equipped in a space-saving design with angle trolley and inclined stranding to the load-stabilisation including load beam, with frequency control, maintenance Jetty, radio control Working speeds: Hoist up to 20.0 m / min Trolley gear up to approx. 26.0 m / min Crane chassis up to approx. 90.0 m / min

1 factory-tested single angle crane in design with laterally movable carrier trolley Load approx. 5,000 kg Span approximately 33,000 mm Hook way max. 9000 mm Make AUMUND/steel Year of production/workshop test 1981/2016 with steel angle trolley for maximum hook path, DEMAG Kranfahran- drove, corridor control freely movable Working speeds: Hoist approx. 1.3/8.0 m / min Trolley gear 10.0/40.0 m / min Crane chassis up to 60.0 m / min