We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
meta name="robots" content="all">
119,260 used machines on RESALE, but how to find them? Machine Search
used
Bed milling machine Manufacturer: SHW Werkzeugmaschinen Type: UF 5 Travel • X-axis: 2,500 mm • Y-axis (headstock vertical): 1,300 mm • Z-axis (headstock horizontal): 750 mm Control • CNC control: Heidenhain TNC 155 B Automatic swivel head (Switch between horizontal and vertical editing) Quill 120mm Milling spindle holder SK 50 Speed 2,500 rpm Mill table • Clamping area: 1500 x 800 mm About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is in the field of tool milling machines. Our services include, among other things, spare parts deliveries, on-site customer service, machine overhauls and control system modernizations. Performances: -Machines Ilbgjd8lvl -Spares -Customer service - Machine service - Machine overhauls - Control modernization _____ Second-hand machin ...
used
SHW UTZ 6 Move: X = 5000 mm Y = 1300 mm Z = 1800 mm 4000 RPM 120-PIECE TOOL EXCHANGE INTERNAL COOLING OF TOOLS (IKZ) TURNING TABLE 1200 mm CONTROLLER: Heidenhain TNC 430
used
SHW UFZ 5 S with tool robot for 60 tools. X 4000, Y 1100, Z 1100, spindle 6000 rpm, round table Dm 1250, pitch 360000, also with horizontal dividing head with steady, pitch 3600000, internal cooling 16bar. Very few operating hours. Condition: excellent (used)
used
Traveling column milling machine SHW UniForce SHW Uniforce 6 (7-Achs) Traverse X / Y / Z Clamping area 10,000 / 3100/1600 mm 11,600 mm x 3,000 mm CNC attachment rotary table 2,500 mm x 2,500 mm maximum load 30,000 kg Control system: Heidenhain i TNC 530
used
x-travel: 16300 mm y-travel: 2600 mm z-travel: 1600 mm Control: Heidenhain type: TNC 430 tool taper: ISO 50 spindle turning speed range: 22-4000 U/min feed in x - axis: 36000 mm/min feed in y - axis: 24000 mm/min feed range Z-direction: 24000 mm/min main drive motor: 37 kW Tool changer: 90 coolant: : total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel: 1800 mm y-travel: 1000 mm z-travel: 1000 mm table surface area: 1000x1000 mm turning speeds: 4000 U/min head swivability: 90 ° Tool changer: 45 chip conveyor: control: Heidenhain type: total power requirement: kW weight of the machine ca.: t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel: 3000 mm y-travel: 1350 mm z-travel: 1400 mm spindle taper ISO: 50 turning speeds: 22-1400 U/min Rotary table: 800x600 mm Table dimensions: 2500x1200 mm Feed: 5-3000 mm/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel: 550 mm y-travel: 350 mm z-travel: 400 mm table surface area: 1130x330 mm number of T-slots: 5 T-slot - width: 14 mmH8 T - slots distance: 63 mm number of tools: SK 40 quill stroke: 80 mm milling-head swivable +/-: 180° total power requirement: kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Manufacturer: SHW Type: UFZ 4L Control: Siemens 880 Year of construction: 1994 Tool holder: SK 50 Track X, Y, Z: 8000, 1000, 1600 (vertical) mm Tool changer 120-fold Table: Top panel 9000 x 1500 mm Internal coolant supply Condition: very good About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Performances: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control modernization
used
Manufacturer: SHW Type: UF6 Rigid Tower Year of construction: 1980 Tool holder: SK 50 Travel X, Y, Z: 3000, 1500(1200), 1600 mm Table: 3000x1200 mm Condition: untested (used) Speed: 1800 1/min Feeds: 1 – 8000 mm / min Rapid traverses: 8 m / min Drive power: 32KW Other: -Safety clamping bolts This machine is not ready for operation, it is ideal for control conversion. The mechanical condition is very good. About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Performances: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control modernization
used
Manufacturer: SHW Machine Tools Type: UF 21 / UF 31 Routes X,Y, Z: 1000, 700,625mm Control: -Machine 1: Heidenhain TNC 355 -Machine 2: Heidenhain TNC 415 Table: NC rotary table 1100x840mm Automatic swivel head Pinole 120mm Milling spindle holder SK 50 Speed 2500rpm Since we offer several machines from this series, the advertised images are exclusively sample images of comparable machines. Feel free to provide us with your individual (control, table size, tilt & tilt Setup, etc.) Inquiry so that we can offer you a machine that meets your requirements. MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Performances: - Used machines - Spare pa ...
used
Manufacturer: SHW Machine Tools Type: UF 41 Routes X,Y, Z: 1000, 700,750mm Control: Heidenhain TNC 415 Table: NC rotary table 1100x840mm Automatic swivel head Pinole 120mm Milling spindle holder SK 50 Speed 2500rpm Since we offer several machines from this series, the advertised images are exclusively sample images of comparable machines. Feel free to provide us with your individual (control, table size, tilt & tilt Setup, etc.) Inquiry so that we can offer you a machine that meets your requirements. MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Oaith Performances: - Used machines - Spare parts - Customer service - Machine service - ...
used
Manufacturer: SHW Type: 5373-01 Speed max.: 1800 1/min Md max.: 600 Nm Angle: 90° Ratio: 1:1 Tool holder: SK 50
used
Manufacturer: SHW Type: 5373-01 Speed max.: 1800 1/min Md max.: 600 Nm Angle: 60° Ratio: 1:1 Tool holder: SK 50
used
SHW UF 5 Travel • X-axis (rotary table): 1,500 mm • Y-axis (headstock vertical): 1,300 mm • Z-axis (headstock horizontal): 750 mm Control • CNC control: Siemens 3 M Conversion to Heidenhain TNC 415 possible Automatic swivel head (Switching between horizontal and vertical machining) Pinole 120mm Milling spindle holder SK 50 Speed 2500rpm Year of construction 1994 • Refurbished in 2016 Stepless NC rotary table • Backle PKTF 55 • Clamping surface: 1500 x 1250 mm About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Performances: - Used machines - Spare parts - Customer service - Machine service - Machine ov ...
used
Manufacturer: SHW Machine Tools Type: UF 21 Routes X,Y, Z: 1000, 600, 625mm Control: Heidenhain TNC 155 Table: Folding table 1000 x 630 mm Automatic swivel head Pinole 120mm Milling spindle holder SK 40 Speed 2500rpm Overhaul 2016 Partial overhaul 2022 About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Performances: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control modernization
used
OFFER 22110 Specifications: - Table size approx. 1000 x 600 mm - Working range of the axes - X (longitudinal) approx. 850 mm - Y ( transverse ) approx. 600 mm - Z (vertical) approx. 625 mm - min. / max. distance table – spindle 0 - 450 mm - Tool holder ISO 40 - Working spindle speeds 45 - 1800 rpm - Vertical milling head can be swivelled left + right - Table feeds 6 - 2000 mm/min - Table rotatable 360 ° - Drive 400 V / 13 kW - separate control cabinet W 1100 x H 1600 x D 400 mm - Space requirement approx. W 2000 x H 2600 x D 2500 mm - Weight approx. 4500 kg
used
x-travel: 2500 mm y-travel: 750 mm z-travel: 1000 mm table surface area: 2550 x 800 mm spindle taper: SK 50 control: HEIDENHAIN, TNC 150 B The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
SHW Uniforce 5 Travel • X-axis (bed): 5,000 mm • Z-axis (vertical): 1,000 mm • Y-axis (headstock): 1,300 mm Control • CNC control: Siemens SINUMERIK 840D Universal milling head in orthogonal design • Swivel range milling head holder: 360 x 1 degree • Swivel range milling head: 180 x 1 degree • Tool holder: HSK 100 • Speed range: 22 – 4,000 1/min Year of construction 1998 • 2022 – partial overhaul o Inspection of all components -> replacement if necessary o General overhaul milling head o Geometric acceptance takes place after New machine acceptance protocol Clip •Mounting table: Conveyor • Task length: Coolant device • Paper belt filter system • Container capacity: 800 l Automatic tool changer •Tool magazine with 90 magazine slots Reversible clamping device Rückle PKTW 2 About us: MBM Maschinenservice & G ...
used
Bed type milling machine SHW UF 6, new in 1977, control system Siemens
used
Travel • X-axis (bed): 16,000 mm • Y-axis (vertical): 2,100 mm o Option Y = 3,100 mm • Z-axis (headstock): 1,200 (1,500) mm Control • CNC control: Siemens Sinumerik 840 C o Option control conversion Heidenhain iTNC 530 o Option control conversion Heidenhain TNC 640 o Option control conversion Siemens Sinumerik 840 SL Feed rate • X, Y and Z axes infinitely variable from: 2 – 12,000 mm/min Universal milling head in orthogonal design • Swivel range milling head mount: 340 x 1 degree • Swivel range milling head: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Speed range: 22 – 3,200 rpm Year of construction: 1998 • 2013 – Headstock overhaul • 2017 – Overhaul of milling head • 2022 – Partial overhaul Clip • T-slots: 28 H7 • T-slot spacing: 250 mm, • Clamping area: 8,500 mm x 1,500 mm Chip conveyors (2 pieces) ...
used
SHW Powerspeed 5 Travel • X-axis (bed): 10,000 mm • Y-axis (headstock): 1,300 mm • Z-axis (vertical): 2,100 mm Control • CNC control: Heidenhain iTNC 530 Feed rate • X, Y and Z axis: 30,000 mm/min • Acceleration: 3.5 m/s² Universal milling head in orthogonal design • Swivel range milling head mount: 360 x 1 degree • Swivel range milling head: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Speed range: 36 - 6,000 rpm Conveyor • Feed length: 10,000 mm Coolant device • Container capacity: 1,200 litres About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is in the field of tool milling machines. Our services include, among other things, spare parts deliveries, on-site customer service, machine overhauls and control system modernizations. Performances: -Mach ...
used
Rotational speed: 112-3000/min, controls: SHW-NC, an inspection is possible.
used
SHW UFZ 6 Rigid Stand Travel • X-axis (bed): 3,000 mm • Y-axis (vertical): 1,600 mm • Z-axis (headstock): 1,500 mm Control • CNC control: Heidenhain iTNC 530 Feed rate • X, Y and Z axes: rapid traverse = 8,000 mm/min Universal milling head in orthogonal design • Swivel range milling head mount: 340 x 1 degree • Swivel range milling head: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Speed range: 25 – 2,240 rpm Overhaul in 2010 • Year of construction 1992 Conveyor • Feed length: 3,000 mm Automatic tool changer • Magazine for 45 tools About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is in the field of tool milling machines. Our services include, among other things, spare parts deliveries, on-site customer service, machine overhauls and control system m ...
used
Milling machine, universal milling machine, tool milling machine, drilling and milling machine -clamping table: 705 x 310 mm -Device table: rotatable/tiltable/swiveling -X/Y/Z travel: 550/340/420 mm -Spindle mount: SK40 -Speeds: from 46 to 2110 rpm -Feed: 12 to 254 mm/min -Pinole stroke: 80 mm -Rapid traverse: mm/min -Coolant device: -Dimensions: 1620/1700/H1810 mm -Weight: 1768 kg
used
travel -x axis: 3.000 mm travel -y axis: 1.600 mm travel -z axis: 1.300 mm control: Heidenhain TNC 430 turning speed range: 6.000 U/min Number of axles: 6 St. numbers of positions in the tool changer: 66 tool taper: SK 50 surface area: 2.000 x 1.600 mm table load: 12.000 kg Bed Type Milling Machine - Universal | SHW - UFZ 5 S equipped with two chip conveyor and a round table Equipment/accessories: - Rückle round table: type PKTF 55, - Universal milling head UFK milling head holder, 360x1 degree swiveling, - Milling head can be swiveled 180x1 degrees - 4-sided work area paneling with electrical. tumbler - Reinforced coolant system 25 l/min at 25 bar, 500 liters container - 2x chip conveyor ejection height 1250mm - Radio measuring probe - 1 set of fixators - electronic handwheel Further information: - July 2019 Exchange spindle installed - February 2019 Y-axis drive motor replaced - Feb ...
used
x-travel: 850 mm y-travel: 600 mm z-travel: 500 mm table surface area: 1200 x 550 mm spindle taper: SK 40 control: HEIDENHAIN, TNC 121 spindle turning speed range: 36 - 1800 U/min quill stroke: 120 mm feeds: 5 - 2000 mm/min rapid traverse longitudinal: 4 m/min rapid traverse vertical: 2 m/min milling head -swivable +/-: 90 ° table rotating: 360 ° total power requirement: 12 kW weight of the machine ca.: 5 t dimensions of machine L x W x H: 2,80 x 2,0 x 2,61 m Accessories: vertical head with hydr. tool clamping and quill retraction, univ. table, various tool fixtures, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Screw conveyor for various materials in very high-quality design with replaceable wear parts, electrically driven, feed length approx. 7 m, feed width approx. 1 m, discharge in the middle, hardly run, very good condition, for example suitable for filling a conveyor belt with the wheel loader, etc.
used
Key data: 1000 mm, 700 mm, 725 mm
Travel • X-axis (bed): 1,000 mm • Y-axis (horizontal): 700 mm • Z-axis (vertical): 7250 mm Control • CNC control: Heidenhain iTNC 530 Automatic swivel head • Quill 120 mm • Tool holder: SK 50 DIN 69871 & DIN 2080 • Speed range: 2,500 rpm General overhaul 2016 • 2016 – General overhaul incl. new control system • 2022 – Inspection and repair • Inspection of all components - > replacement if necessary • Geometric acceptance is carried out according to the new machine acceptance protocol Infinitely variable NC rotary table • Clamping area: 1,100 mm x 840 mm Used machine – Used milling machine – Used universal milling machine – Swivel head – Metalworking – Tool milling machine – Milling head – SHW machine – Bracket milling machine – Rotary table – NC rotary table – SK50 – SHW spare parts – Milling machine used ...
used
This milling machine was manufactured in 2022. Equipped with KUKA KR 270 R2700 ultra, the SHW Unispeed 3000 offers precision and reliability in machining operations. Its 5-axis configuration with three linear and two rational axes ensures efficient material removal and accurate shaping. The robust build and advanced automation capabilities make it suitable for various industrial applications. For those seeking a dependable machining solution, consider this SHW Unispeed 3000 milling machine. For further details, contact us today.
new
The photo shows the commissioning at our customer in Turkey. Other machines with a Faceplate diameter of 3000mm to 6000mm are available at short notice.
new
The photo shows the commissioning at our customer in Turkey. Other machines with a flatdisc diameter of 3000mm to 6000mm are available at short notice.
used
Control Siemens 840 D Travel X/Y/Z 1800/425/400 mm Tool magazine for 36 Wkz. SK40 Speed 5,000 rpm Clamping area 2560x450 mm Conveyor
used
Key data: 500 , 1500 , 500
Technical description: Turning diameter over bed 500mm Turning diameter via support 325mm Turning diameter in bridge 630mm Center width 1500mm Bed width 330mm Spindle nose CAMLOCK Gr.8 Spindle bore 80mm Speed levels 15 Speeds 24 – 1600 rpm Metric threads 66 0.5-28mm Inch thread 66 1-56 Module thread 33 0.5-3.5 Diametrical Pitch 33 8-56 Longitudinal feeds 0.072-4.038mm/U Cross feeds 0.036-2.019mm/rev Tailstock MK5 Tailstock pinole stroke 120mm Motor power 380V 5.5KW Weight Approx. 1900kg Equipment: Digital display 3 axes with glass measuring rods. Quick-change steel holder system Multifix compatible Gr.B with 4 pockets, removable bed bridge, lining protection with electr. Locking, foot brake, coolant system, fixed stop, halogen work light, 3-jaw chuck, 4-jaw chuck, clamping disc, lynettes, tips, hardened and ground bed guide tracks, hardened and ground gears, ti ...
used
This electrically driven sinusoidal table has an incremental angle measuring device (Heidenhain RON 705). -Sinusoidal table for workpiece clamping -Swivel range 0 - 110° -Clamping surface 800 x 600 mm -Groove width 22 mm -Groove spacing 100 mm -Number of grooves:6 pieces -Dimensions: Length: 840 mm Width: 760 mm Height: 220 mm Clamping angle, clamping angle, clamping tower, clamping device, About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Performances: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control modernization
used
Motor-driven NC rotary table Stepless rotary table (pitch 0.001°) Attached pallet station: pallet changing table (2 pallets) Manufacturer: Rückle Type: PKTF 1200 Table size: 1200 mm x 1200 mm Total height: 660 mm Centering bore: 100 H6 mm Clamping grooves: 7 pieces Slot dimensions: 22 H7 mm Slot spacing: 160 mm The displacement measurement is carried out via a rotary encoder ROD 250. Condition: Very good (used) Optional with machine bed (travel = 2000 mm) About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Performances: - Used machines - Spare parts - Customer service - Machine service - Machine overha ...
used
Motor-driven NC rotary table Stepless rotary table (pitch 0.001°) Manufacturer: Rückle Type: PKT 1000 Clamping area: 1400 mm x 1400 mm Total height: 319 mm Clamping grooves: 7 pieces Slot dimensions: 22 H7 mm Slot spacing: 160 mm Centering bore: 140 H6 mm Condition: Very good (used) Optional with machine bed About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Performances: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control modernization
used
Universal Vertical Milling Head This milling head was used on a Union TC130 table boring machine and can be adapted to many other machines. About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Performances: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control modernization
used
NC Rotary Table Manufacturer: Eimeldingen Table size: 1100 x 840mm Infinitely divisible Condition: As good as new About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Performances: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control modernization
new
CNC control: FANUC 0i-TF+ with 15" LCD color display and Manual Guide i -12-fold tool turret with BMT45 holders, 24-fold indexing -Coolant device with 10 bar delivery pressure incl. coolant gun -WTO Holder Package -Oil skimmer with endless belt for extraneous oil separation -Warning light with 3 colors -Workspace lighting -Bar feeder interface for connecting loading magazines -Chip conveyor, ejection right -Part ejector on counter spindle incl. cooling by the spindle -Chuck blow-out device on the counter spindle -Parts catcher with parts conveyor belt inside -Automatic surveying arm -Transformer -CE conformity -English machine manuals -Main spindle: 3-jaw power chuck Ø210 mm (8") for spindle head standard: A2-6; Make: SAMCHULLY incl. 1 set of soft and 1 set of hard jaws -Counter spindle: 3-jaw power chuck Ø135 mm (5") for spindle head standard: Flat-110; Make: SAMCHU ...
used
Tip height: 180 mm Diameter: 240 mm Space requirement: approx. 1550 x 400 x 350 mm Motor: GOULD Permanent Magnet Servomotor Type: M23Y-Y60Y-900N-TH Encoder ROD 426 – 2000 Condition: very good (used) About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Performances: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control modernization
new
CNC control: FANUC 0i-TF+ with 10.4"/15" LCD color display and Manual Guide i -12-fold tool turret with BMT65 mounts -Coolant device with 10 bar delivery pressure incl. coolant gun -WTO Holder Package -Oil skimmer with endless belt for extraneous oil separation -Warning light with 3 colors -Workspace lighting -Bar feeder interface for connecting loading magazines -Chip conveyor, ejection right -Part ejector on counter spindle incl. cooling by the spindle -Chuck blow-out device on the main spindle -Parts catcher with collection box -Automatic surveying arm -Transformer -CE conformity -English machine manuals -3-jaw power chuck Ø210 mm (8") for spindle head standard: A2-6; Make: SAMCHULLY incl. 1 set of soft and 1 set of hard jaws -Counter spindle 8": 3-jaw power chuck Ø170 mm (6") for spindle head standard: A2-5; Make: SAMCHULLY, incl. 1 set of soft and 1 set of hard ...
used
Vertical CNC machining center Manufacturer SW Schwäbische Werkzeugmaschinen Type BA35 Year of construction 1998 Control Siemens 840D Travel X/Y/Z 2150/500/500 Work train holder SK40 max spindle speed 10,000 rpm 36 compartment tool changer Conveyor IKZ internal coolant supply
used
used
used
Pressure Filter WMW, WERKZEUGMASCHINENFABRIK ZELLA-MEHLIS B13-32-40 OV 160 bar Nominal diameter: 10 mm New ! Dimensions: 130 x 80 x 130 mm
used
We offer Lathe VDF with three-jaw chuck bed >100cm W:approx. 350cm 3000kg see photos The machine is used, fully functional. It is sold in the same condition as it is shown in the photos. specifications - Manufacturer: VDF Werkzeugmaschinen Hamburg - Bed > 100cm - Weight: approx. 3000 kg (customer info.) - Connection: 230V 50 Hz / 24V - Dimensions: estimated 3500 x 150 x 100 cm No further data is available. The machine is still in our customer's factory near Staßfurt. It is sold ex works EXW (forklift loading option available). Please only bid if you accept the terms and conditions of sale We sell the assets on behalf of our customers. The offer prices are to be understood as net prices in EURO ex works. The offers are subject to change, errors excepted and subject to any prior sale. In this context, we expressly refer to our terms and conditions. We would also ...
used
4-spindle drill head, drill head WMW, HECKERT, Werkzeugmaschinenfabrik ZELLA-MEHLIS 003-7619 i : 1:1 Tool holder: 4x chuck ER16 spindle distance: 30 / 45 mm drive: SK45 housing diameter: Ø 90 / 95 mm used, tested ! Dimensions: 315 x 140 x 106 mm
used
Manufacturer GEMINIS Model GHT-4 720 x 3000 Year 2004 CNC FAGOR 8055 TC/B Capacities and feeds Max. swing over bed 720 mm. Max. swing over cross slide 470 mm. Height of centres from flat guide 366 mm. Distance between centres 3.000 mm. C Axis and driven tools INCLUDED Fast feedrate X/Z axis 8.000 mm/min Work feedrate X/Z axis 8.000 mm/min Headstock Main spindle bore diameter 92 mm. Main spindle nose DIN-55027-11 Spindle diameter on front bearing 150 mm. Spindle speed 0-1600 Spindle automatic ranges 2 Main spindle power 17 / 20,5 kW Spindle torque 1590 / 1920 Nm Tailstock Ø Tailstock Quill 100 mm Tailstock travel 200 mm Taper Morse 6 Bed Width 430 mm. Height up to flat guide 775 mm. Turret Turret type Sauter VCI50 Ø400 mm. Driven tool position at turret 8 Driven tool power 5.5 kW Additional equipment 3 jaw auto-centering chuck SHW Autoblock 315 BH ...
used
Gear pump, feed pump with motor SHW TROCHOCENTRIC TS1000 Q: 16 cm3/U p: 10 bar n: max. 1500 rpm Input: G1 Output: Engine: VEM KMER B 90 L 4 ( KMERB90L4 ) 1,5 kW 1400 rpm 220 / 380 V used, tested ! Dimensions: 520 x 230 x 220 mm