We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,597 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Pendulum saws Bacus for wall mounting Saw á 500 mm Built in 1982 L x W x H: 70 x 60 x 100 cm Weight 370 kg The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Scratch chain conveyor MATEC For wood chip extraction -Trogwidth 300 mm -Troghheight 450 mm -Troglänge about 5500 mm -Steel sheet 4 mm -Creation below once about 65 ° -Discard height from ground about 4500 mm -single-stranded chain guide links A-A 80 mm -Conveyor slats plastic height about 130 mm -Drive snail gearbox engine electric 1.5 kW, 3x400 V, 50 Hz Weight about 1100 kg Built in 2018, new The machine is in very good condition, operational. Changes, errors, intermediate sales reserved! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
tahlkonsole with height adjustable table Table 720 x 500 mm, thickness 8 mm Weight 20 kg Built in 1975 The console is in good condition, ready to use. Subject to changes, errors, prior sale! Service/Ersatzteile durch MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Maschinenbau Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland
used
Lithotripter Wolf Piezolith 3000 Table Ultrasound C-arm X-ray Calibrate tools Manuals
new
Technical data: Nominal power 600 kg/h Power: Drive engine 0.75 (1.02) kW (hp) Brush cleaning 0.37 (0.5) kW (hp) High-pressure cleaner 4.7 (6.4) kW (hp) Electric connection 400V 50Hz (3 phases) Electrical protection 16 A Dimensions: Length 1 825 mm Width 1 085 mm Height 1 290 mm Discard or drop-in height 1 290 mm Bandwidth 420 mm Order width 300 mm Order height 10-50 mm Weight (ribbon press) 550 kg Material 1,4301/AISI 304 Juice yield 70% Ribbon speed (infinite) 2.1-5.5 m/min Transcourse time 0.4-1 min Water connection at least G 1/2, "min 12 l/min Height juice drain 305 mm Height Trester ejection 780 mm Can be used for nuclear and stone fruits Included high pressure cleaner, compressor
used
Worker-Federhenn pneumatic Cap scissors with table on casters to abbreviate window hardware L x W x H: 170 x 70 x 135 cm Weight approx. 100 kg Built in 1987 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
MATEC ZRP 320 Inox Pharma gear pump with sep. Fans for exact delivery quantities MATEC gear pumps are very precisely made of high-quality material. The pumps have been specially designed for the promotion of gel-like media of the pharmaceutical and food supplement industry in the viscosity area 2500-4000 MPas developed. The slanted gears guarantee a quiet, pulsation-free and precise transport. With the help of frequency converters, the flow rate can be adjusted exactly to the current demand and the motor can be controlled from normal 50 Hz frequency down to 1 Hz or up to over 80 Hz. The almost leak-free operation allows an exact dosing conveying without empty pump operation. This preserves the quality of the medium. Pump heatable with 2 el. Heating cartridges up to 100°C, temperature sensor, temperature control unit new Spare Parts/Service MATEC CH-4952 Eriswil/EN-79618 ...
used
Full gate clamping cars Möhringer among the REF. No. 262-1492 L x W x H: 280 x 120 x 180 cm Weight 3000 kg Built in 1984 Price EXW with full frame saw Boegli MARA-2 (Ref. No. 262-1492) 19'800 EUR Excl. VAT The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Ball valve Hiltbrand Rp 2" 2/2 Way ball valve with full passage max. 16 bar Female thread Rp 2" Case and ball: stainless steel 1,4408 Seal: PTFE Medium: Neutral, clean, liquid and air Medium temp.: -10°C to +115°C without autom. Default Setting time for 90°: approx. 17 sec. Case: Aluminum 230 V, 0.3 A Switch-on time: 75% Cable glands M20 Type of protection: IP67 Ambient temp: -10°C / +50° C Emergency tin: INnen sechskant Limit switch: Potential-free (on/to) The machine is in good condition, ready for operation. Changes, errors, intermediate sale reserved ! Service/spare parts by Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Full frame saw Boegli MARA-2 with Electr. Switchgear with associated Chuck Wagon (REF. No. 262-1491) Masch. No. 373 Through root á 600 mm With hydr. Sheet tensioning device L x W x H: gate 260 x 200 x 450 cmm Weight approx. 1200 to Built in 1978 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Ball valve Hiltbrand Rp 2" 2/2 Way ball valve with full passage max. 16 bar Female thread Rp 2" Case and ball: stainless steel 1,4408 Seal: PTFE Medium: Neutral, clean, liquid and air Medium temp.: -10°C to +115°C without autom. Default Setting time for 90°: approx. 17 sec. Case: Aluminum 230 V, 0.3 A Switch-on time: 75% Cable glands M20 Type of protection: IP67 Ambient temp: -10°C / +50° C Emergency actuation: inner hexagon Limit switch: Potential-free (on/to) The machine is in good condition, ready for operation. Changes, errors, intermediate sale reserved ! Service/spare parts by Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Roller conveyor for frame saw to cross off promotion L x W x H: 150 x 230 x 100 cm Weight approx. 6000 kg Built in 1978 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/Ersatzteile durch MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Maschinenbau Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Machine type TIG inverter welding system water-cooled DC and AC system Make Merkle Type Insquare 250 W Plant No. 22,351 Connection voltage 3 x 400 volts Setting range 5 - 250 amperes Switch-on time 60% ED at 250 amperes 100% ED at 200 amperes Current setting infinitely variable maximum weldable material thickness steel / VA = 6 mm Aluminum = 4 mm Cooling inverter by built-in fan Cooling burner water-cooled Execution of mobile industrial plant Hedging 16 Ampere Dimensions L x W x H 955 x 515 x 945 mm Weight 120 kg Age approx. 20 years Condition workshop-tested very well incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece TIG burner WHW 20/Z, 4 mtr. Long 1 piece ground cable 1 piece pressure reducer with 2 pressure meters 1 pair of TIG gloves 1 piece spare part box cpl. Equipped ...
used
Cross off feed for roller conveyor L x W x H: 400 x 230 x 80 cm Weight 4000 kg Built in 1978 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Very good metal separator / metal separator for the separation of all metals (including stainless steel, VA) from a material flow. Can be used before or after a NO-ne ate separator (eddy current separator) or as a stand-alone machine. Separation of all metals from approx. 1 mm grain size. Meaningful use for metal contents up to 60% metal content. Unique flap technology (flipper), no compressed air required. The machine is immediately ready for operation, can be inspected and tested. On request also with camera! If the machine is too small, we build it larger. This is our demo machine. Maximum throughput depends on the material and purpose. Price matter of negotiation!
used
Cross conveyor for removal of boards L x W x H: 5 x 4 x 1 m Weight 3000 kg Built in 1978 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
with membrane conveying
used
Sollas S60 wrapper for cardboard packaging The plant was built in 2007 by Sollas Deutschland GmbH & Co KG. Since then it has been used for packing cartons. It has a product retraction function, so that folding boxes can also be welded with feet. ” Aggregate: wrapper s60 60 pcs. /min. Film rollers: Max. Outer diameter 400 mm Max. Roll width 435 mm Min. Internal diameter 70 mm Max. Internal diameter 83 mm Min. Cutting length 50 mm Max. Cutting length 750 mm Dimensions of the packaged goods: Length: 40 mm/300 mm Width: 20 mm/200 mm Height: 16 mm 96 mm According to the information provided by the manufacturer, the machine is designed for the following packaging materials: - Coated paper - PP - PE The machine is designed for the complete or partial packaging of products. Unpackaged food is not compatible.
used
Saw mill vertical Boegli Weight 4000 kg L x W x H: 200 x 160 x 330 cm Roll diameter 1250 mm Stem á 1.2 m, with mechanical clamping cars 9 m Chuck Wagon L x W x H: 900 x 200 x 170 cm Weight approx. 6000 kg Built 1952 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
The belt dryer / continuous dryer is used for the continuous drying of coatings on smooth surfaces such as glass. Manufacturer TESOMA GmbH Type LYNX Version 16-E-HHH-X Built in 2008 Bandwidth 1600 mm Flow height 400 mm Inlet length 500 mm 3 hot air segments per 2000 mm Outlet length 500 mm drying temperature 100 °C solvent throughput 7.00 kg/h at minimum exhaust air volume flow 1500 m3/h Tape speed 0.5 - 5 m/min Connected power 89 kW Heating capacity 79 kW total motor power 10 kW (fan and drive) Total dimensions Width: approx. 2400 mm Length: approx. 8800 mm Height: approx. 1800 mm For a visit, please make an appointment.
used
Aspirator Rachel with fan, 11 kW Chip feeding screw Pipes Built in 1995 L x W x H: 150 x 120 x 400 cm Weight approx. 2500 kg The machine is in good condition, ready to use. Subject to changes, errors, and intermediate sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Used burn-in tunnel kiln for drying or burning products made of glass, ceramics or similar things. A total of up to 8 ovens are for sale. The belt furnaces were installed in a system for the glass foam (foam shading) production and were in use until the demo days of the complete plant. We also continue to have components of the plant, such as mills, mixers, silos, and conveyor technology. Manufacturer: MUT GmbH Jena Type: BDO 100-150 Built: 2003 Max Temp. 1100°C Connection value: 315 kW Control SIEMENS S7 -300 Length approx. 14 m Internal dimensions: approx. 300 x 1000 mm The ovens can also be used for tempering, glazing, sintering, blowing, drying and cooling of powdery or chunky goods.
used
Wood drying chamber Bollmann L x W x H outside: 11.0 x 3,0 x 2,7 m Stack dimensions B x H: 1.5 x 2.0 m Weight approx. 2000 kg Built in 1982 The wood drying chamber is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Used low-pressure flame pipe boiler from LOOS from Gunzenhausen in good condition. The plant was in operation until the demo days and was shut down due to general plant changeover. Manufacturer LOOS Gunzenhausen Type: UN-D 2600 53.0 m2 x 1 bar Built in 1999 Ab. Steam generation 3200 kg / h Ab. Pressure 1 bar Water content 2560 l Brenner Weisshaupt Type L7T Heating oil burner Power 320 - 1957 kW Used last TÜV exam 2018 Dimensions: 4000 x 1900 x 2400 mm Also visit our website. We have a wide range of products in stock for the industry. A visit is worthwhile. The information about our company and the link to our website can be found in the dealer list under Brand GmbH.
used
Knee lever shears for sheet metal Cutting length 15 cm maximum sheet thickness 3 mm Built in 1982 L x W x H: 50 x 40 x 150 cm Weight approx. 50 kg The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/Ersatzteile durch MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Maschinenbau Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
new
Acceptance bunker 3,550 x 6000 x H 1,560 mm, for bulk solids, with 3 dosing screws Universally applicable acceptance bunker for bulk material e.g. grains, wood chips, potatoes, waste... Conveying volume depending on bulk material 1 - 80 m3/h The pick-up bunker is filled from above on a easily accessible side of the acceptance bunker by means of a shovel loader. The access roads and exclusion zones must be marked in order to avoid accidents and damage to the bunker and its extensions by starting up. The three parallel, identical and directly driven snail trees transport the goods through a partition wall to a cross-arranged snail tree. The partition wall prevents the conveyed material from flowing back into the acceptance area. The product is transferred to the connected trough screw conveyor (TS 420 x 7,000) by the frequency inverter-controlled cross-screw, which is desig ...
used
Due to bankruptcy custommer cancellation, we sell a pallet shelf system from BITO, who is immediately available. Total pallet places available uot to 2.100 pallet places. The price here is for following combination: 60 x shelf fields with each 3 x beam pairs 3600 x 120 x 50mm Height of the frames 6.600mm. Depth 900 or 1100mm Total quantity: 70 pieces of frames 6600x1100mm, galvanized, dismantled 360 pieces of beams 3600 x 120 x 50, compartment 2.000 kg, Virgin Blue painted More and smaller quantities possible. Please enquire Mr. Rössler / LHS GmbH
used
Machine type TIG inverter welding system water-cooled DC system Make Merkle Type TIG 300 DC W Plant No. 85.186 Connection voltage 3 x 400 volts Adjustment range 5 - 300 amperes Switch-on time 50% ED at 300 amperes 60% ED at 280 amperes 100% ED at 220 amperes Current adjustment infinitely variable max. weldable material thickness 8 mm Cooling inverter by built-in fan Cooling burner water-cooled Version portable compact system Fuse 16 Ampere Dimensions L x W x H 535 x 230 x 670 mm Weight 40 kg Age 9 years Condition workshop-tested well incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece TIG welding torch 8 mtr. Long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 piece spare part box kpl. Equipped 1 pair of welder gloves 1 piece user manual Warranty 6 months ...
used
Edge glue machine HolzHer express 1437 Glue, caps, flush milling, RADIUS milling / Beveling, scraping, cutting tool for rolling edges Total revision 10 years ago everything top Year of construction 1989 L x W x H: 500 x 120 x 170 cm Weight approx. 1800 kg The machine is in top shape, ready for use. Subject to changes, errors, and intermediate sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Machine type TIG inverter welding system water-cooled DC system Make Merkle Type TIG 300 DC W Plant No. 85.186 Connection voltage 3 x 400 volts Adjustment range 5 - 300 amperes Switch-on time 50% ED at 300 amperes 60% ED at 280 amperes 100% ED at 220 amperes Current adjustment infinitely variable max. weldable material thickness 8 mm Cooling inverter by built-in fan Cooling burner water-cooled Version of mobile compact system Fuse 16 Ampere Special accessories trolley Dimensions L x W x H 535 x 230 x 670 mm Weight 40 kg Age 9 years Condition workshop-tested well incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece TIG welding torch 8 mtr. Long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 piece spare part box kpl. Equipped 1 pair of welder gloves 1 piece ...
used
Caterpillar engine C12 # BDL... an overhault,exchange engine with original CAT parts incl.turbo,sensors,controller,without starter+altenator Other CAT engines/parts from stock immediately available request Contact: MIW GmbH North-West-Ring 8 D-27404 Zeven/Germany Info@miw-Zeven.de phone: 0049(0) 4281-950583
used
Generator of the Jenbacher 312 Newage engineers GmbH 664 kW 800 kVA Can we gladly create an offer of a generator maintenance
used
Biological exhaust air purifier for odour removal, exhaust air treatment, bio-air purifiers, biofilters, air scrubbers used The exhaust air filter can be used for odour disposal in wastewater treatment, waste management, oil mills and malthouses, biogas plants, landfill degassing, carcass recycling plants and slaughterhouses. The exhaust air is first passed through an air scrubber / humidifier and then through the biofilter material. There, the unened odours are neutralized. Manufacturer S&H GmbH & Co. Umweltengineering KG Year of construction probably 2006 Dimensions: approx. 10.5 m x 10.5 m + 2.5 x 5 m Surface filter 9 x 9 m (internal dimension) Filter material: 149 m3 biomix and 24 m3 oak wood Bulk height 2.14 m The side walls are made of PE panels with support made of galvanized steel. The filter was installed in a biogas plant. We also have other components of the s ...
used
Jaw Crusher Baioni BS 105 incl. spare parts (without JAWS) Only 900 hours of operation since replacing bearings Total1960 hours of operation Masch for normal stone. No. 1917 Year 2009 intake opening 1050 x 340 mm Minimum gap width 30 mm Maximum gap width 77 mm 55 kW Weight approx. 9'900 kg V-belt protection The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Industry - fan / blower manufacturer: DSD air Division (today: Ferrostaal air technology GmbH) Type: Dara 1000 R Year of construction: 1992 Flow rate: 35,000 m ³/h Pressure: 6,500 PA Speed min.: 2,035 U/min Speed max.: 2,160 rpm Power: 75 kW Air density: 1.1222 kg / m ³ Maximum temperature: 90 ° C Original price: 68.000,00 € net In very good condition!
used
Centrifugal deposition Hydro Zyclone Liquid Particle Separator Hydro Cyclean HC5/HCH5 used Hydrocyclone Gravity-Water-Particle Separator Cyclone Water filter Water cleaner Watercleaner For separating heavier, larger particles in liquids or sludges. Was used to separate particles from washed-up pappier & cardboard solids. Price per pc3 3 x available Manufacturer: SULZER-ESCHER WYSS GmbH Type: HC5-TB5B.40 Y.O.M.: 1993 Main pipes dN400 1x Masch.Nr: 11835 (EQ.Nr 11GE01/1st stage) 1x Masch.Nr: 11837 (EQ.Nr 11GE01/1st stage) 1x Masch.Nr: 11836 (EQ.Nr 11GE01/1st stage) 1x available Manufacturer: SULZER-ESCHER WYSS GmbH Type: HC5-TB6B.48 Y.O.M.: 1993 Main pipes dN400 1x Masch.Nr: 11835 (EQ.Nr 11GE02/2nd stage) Cyclone & Distribution Material: Plastic Frame & Pipe Material: Stainless Steel Size Total approx.: 6200 x 1100 x 2800 mm Weight each approx.: 2.5 to T ...
used
Cooling screw trough screw double-walled heated or coolable used Manufacturer: BARL Maschinenbau GmbH Type: KT0803F17T50 Built: 2015 Total dimensions of the trough screw approx. 9.5 x 1.3 x 1.6 m Trough length approx. 8000 mm Trough width outside approx. 450 mm Trough depth approx. 600 mm Conveyor length approx. 7000 mm partly double-walled and can be heated or cooled with water Steel screw with cooled shaft Spiral thickness approx. 8 mm Diameter approx. 400 mm Spiral height approx. 100 mm Slope approx. 160 mm Shaft approx. 200 mm geared motor 1.5 kW 6.8 rpm 220/380 V substructure Steel construction approx. 11 x 2.5 x 0.2 m Total dimensions: approx. 11 x 2.5 x 2 m Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.
new
Vertical turret lathe FKD 40 CNC with Y-axis and CNC Rotary milling head (A-axis) Faceplate diameter 4000 mm Turning diameter: 8000 mm Turning height: 3000 mm Slide cross section: 300 mm x 300 mm Stroke: 3000mm X-axis: travel 5000 mm Z axis: travel 2000 mm Y-axis: travel 6000 mm W-axis: stroke 1500 mm C-axis in face plate table A-axis milling head Control: Siemens 840 DSL Tool changers: 60 seats PickUp station: 5 places
new
- (H) Mr President, I would like to OCEAN TECH - only the hydraulic module OCTACC 400-600 M.T.A. S.p.A. the hydraulic module OCTACC 400-600 is an external hydraulic kit with frame and housing and suitable for external control (release) and external processing of fault messages. It includes pump and storage tank. In addition to the pump and tank, all hydraulic kits have the following components: • Membrane expansion vessel • Vent valve • Safety valve • Emptying tap • Filling kit with manometer Hydraulic kit as external component for HOCT 400 / 500 / 600 Pump type P1 Number of pumps 1 Rated power per pump kW 4.0 Available print ext. Bar 1.0 - 2.0 Flow rate m3/h 5.9 - 56 Execution external Tank capacity l 350 Length hydraulic kit mm 1950 Wide hydraulic kit mm 785 Height hydraulic kit mm 1200 Serial number: 2200325782 Built in 2018 Condition: Optical ...
used
Kehl machine / milling machine Schneider 3-roll feed SUVA protection L x W x H: 120 x 100 x 170 cm Weight approx. 580 kg Built in 1981 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
new
- (H) Mr President, I would like to OCEAN TECH - only the hydraulic module OCTACC 400-600 M.T.A. S.p.A. the hydraulic module OCTACC 400-600 is an external hydraulic kit with frame and housing and suitable for external control (release) and external processing of fault messages. It includes pump and storage tank. In addition to the pump and tank, all hydraulic kits have the following components: • Membrane expansion vessel • Vent valve • Safety valve • Emptying tap • Filling kit with manometer Hydraulic kit as external component for HOCT 400 / 500 / 600 Pump type P1 Number of pumps 1 Rated power per pump kW 4.0 Available print ext. Bar 1.0 - 2.0 Flow rate m3/h 5.9 - 56 Execution external Tank capacity l 350 Length hydraulic kit mm 1950 Wide hydraulic kit mm 785 Height hydraulic kit mm 1200 Serial number: 2200325782 Built in 2018 Condition: Optical ...
used
used
Extruder KE 90 x 30-D for manufacturing of von TPE foam and compact profiles screw diameter: 90 mm L/D ratio 30:1 (2700mm) extruder with 11 temperature-controlled zones (electrically heated by fluids) Siemens electric drive, motor 45kW at 2500rpm year of construction 1996, machine in very good condition (preliminary used in test operations) melt application device (gear pump) double profil head (also used for extrusion-coaded framework belts) electric equipment partially available extruder mounted on movable baseplate
used
used
Strapex apparatus Plastic band seals L x W x H: 80 x 40 x 100 cm Weight approx. 70 kg Built in 1982 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
used
used
used
used