We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,597 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
new
Heat pump / chiller - switchable - water / water cooled, Type: OCEAN Tech HOCT 200 MTA S.p.A. OCEAN Tech HOCT 200 are water-cooled heat pump / chiller for indoor installation without hydraulic circuit (pump, accumulator) incl. crank pan heating, phase monitoring. An external dry cooler unit is not included in the offer. Cooling capacity kW 53.9 Cold water temp. Exit/Entry: 7 / 12°C Flow rate m³/h 9.25 Cooling water temp. Exit/Entry: 45 / 40°C Flow rate m³/h 13.5 Heating capacity kW 67.9 Cold water temp. Exit/Entry: 7 / 12°C Flow rate m³/h 9.51 Cooling water temp. Exit/Entry: 45 / 40°C Volume flow m³/h 11.7 Refrigerant R 410A Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3 Max. power consumption (kW) 24 Max. current (A) 40 Starting current circuit (A) 162 Protection class: IP22 Dimensions: Length mm 1735, Width mm 660, Height mm 120 ...
used
Used Kiener Skinetta ASK 450 Overwrap / bundle machine Manufacturer: Kiener Skinetta GmbH ( Germany ) Type: ASK 450 Year: -83 / -89 Control panel Multi-tier Speed: up to 25 cycles / min. Leaflet feeding unit Infeed conveyor: 1200 mm x 180 mm Steel rod conveyor 1000 mm x 450 mm Film width: 40 - 450 mm Film material: PE,PP Sealing width: max 450 mm Sealing height: max 290 mm Power: 380 v., 5 kW Air: 6 bar Heat blower 4 pcs Overall dimensions: 1300 mm x 110 mm x 1900 mm Weight: 300 kg
used
Air cooler / process chiller / chiller air-cooled, Type: TAEevo Tech 251 P3-20 MTA S.p.A. TAEevo Tech 251P3-20 are air-cooled compact water chillers suitable for outdoor installation (-20°C to +46°C). Including crank pan heating, phase monitoring, buffer tank 350 ltr. and built-in P3 Circulating pump. Cooling capacity kW 50.4 Cold water temp. Exit/Entry (°C): 7 / 12 Flow rate (m³/h) 8.59 Available pump pressure (bar) 2.61 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max. power consumption (kW) 26.99 Max. current (A) 45,79 Starting current circuit (A) 144.38 Protection class: IP54 Dimensions: Length (mm) 2250, Width (mm) 866, Height (mm) 2054, Weight (kg) 1023 Connection Rp 2 " Price: on request in Euro (plus VAT from Nettetal) – 3 months warranty Serial No.: 2200342104 Year of co ...
used
Warm air heating Spanex UL/E-50 RW-02 with chips 40 kW L x W x H: 1970 x 820 x 1570 cm Weight 530 kg Year 2012 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Machine name: Dissolver Manufacturer: Schneider Maschinenbau Gmbh Type: SHDC15 KWFU Ex Year of construction: 2010 Speed: 150 - 1500 rpm Material: Stainless steel Engine drive: 22.55 kW Design: Explosion protection: II 2 / 3 D c T120°C Total capacity: approx. 900 liters 900 liter container Parts in contact with the product: Stainless steel Equipment: Hydraulically extendable Dimensions: Machine height approx.: 3100 mm, (upper part extended) Length, with container, approx.: 2200 mm, width with collet approx.: 1800 mm, pliers open Weight, without container, approx.: 1600kg Foundation load approx.: 6000 kg/m3 Empty weight: 1600 kg Tech. Documentation: Yes in PDF Accessories: Stainless steel mixing tank, Dissol glare: diameter 450 mm, Frequency converter Condition: Used Price: On request
used
Vacuum pump Rietschle CLFE 61V (02) Suction capacity 60 m3 / h Final pressure 10 bar Motor 2,2 kW Year of construction 1989 L x W x H: 80 x 50 x 40 cm Weight approx. 50 kg The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Crater The VP 800 bottle packer and depacker is designed for automatic operation within the beverage industry.
used
Process chiller / chiller water-cooled, Type: Aquarius G2 - AQG2 1401, Green Refrigerant R513A, MTA S.p.A. The Aquarius G - AQG2 1401, 2601 are water/water chillers for indoor installation. Shell-and-tube evaporators, Bitzer screw compressors with infinitely variable capacity control, control and switch cabinet incl. Vitaulic couplings. Cooling capacity (kW): 351 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h): 60.2 Cooling water temp. Exit/Entry (°C): 35 / 30 Volume flow (m³/h): 73 Refrigeration circuit: Refrigerant R 513A Number of refrigeration circuits: 1 Total number of compressors: 1 Power levels (%): 0-25 infinitely variable up to 100 Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max. power consumption (kW): 128 Max. current (A): 209 Starting Current Circuit (A): 341 Protection class: IP54 Dimensions: Length (mm) ...
used
Process chiller / chiller water-cooled, Type: AQUARIUS PLUS 2 – AQP2 2601 MTA S.p.A. The Phönix AQUARIUS PLUS 2 – AQP2 2601 are water-to-water chillers for indoor installation. Shell-and-tube evaporators, Handbell screw compressors with infinitely variable capacity control, control and switch cabinet incl. Vitaulic couplings. Cooling capacity (kW): 654 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h): 112 Cooling water temp. Exit/Entry (°C): 35 / 30 Flow rate (m³/h): 134 Refrigeration circuit: Refrigerant R 134A Number of refrigeration circuits: 1 Total number of compressors: 1 Power levels (%): 0-25 infinitely variable up to 100 Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max. power consumption (kW): 215.03 Max. current (A): 356.88 Starting Current Circuit (A): 602 Protection class: IP54 Dimensions: Length (mm): 432 ...
new
A vertical pillow-pack packaging machine enables a very flexible manufacturing of packaging. Different bag types you can with short set-up and make-ready times through different options with different bag widths and lengths produce. The bag can be made with printed and transparent foil. FEATURE -Modern pillow-pack machine in the optimal price-performance ratio. Stainless steel with safety plexiglass Color touch-display with intuitive operating software -Fast, tool-free bag size change -Simple, intuitive operation -low maintenance APPLICATIONS Gusset bags, sealing bags, pillow bags Granules, food & non-foods, such as chips, rice, coffee, sweets, powders (flour, food supplements, etc.), TK goods, pet food, and much more. TECHNICAL data sample for the VSBM01 Film width: 220-520mm sealing width: 5-10 mm front surface width: 60-190mm Side Surface Width: 40-110mm maximum m ...
used
Process chiller / chiller water-cooled, Type: AQUARIUS PLUS 2 – AQP2 2601 MTA S.p.A. The Phönix AQUARIUS PLUS 2 – AQP2 2601 are water-to-water chillers for indoor installation. Shell-and-tube evaporators, Handbell screw compressors with infinitely variable capacity control, control and switch cabinet incl. Vitaulic couplings. Cooling capacity (kW): 654 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h): 112 Cooling water temp. Exit/Entry (°C): 35 / 30 Flow rate (m³/h): 134 Refrigeration circuit: Refrigerant R 134A Number of refrigeration circuits: 1 Total number of compressors: 1 Power levels (%): 0-25 infinitely variable up to 100 Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max. power consumption (kW): 215.03 Max. current (A): 356.88 Starting Current Circuit (A): 602 Protection class: IP54 Dimensions: Length (mm): 432 ...
used
Stock# U2428-1 Used stainless steel twin screw cooling conveyer by AMF (Apener Maschinenbau und Forderanlagen Gustav Bruns GmbH & Co KG) model HDS 250 x 3500. Machine has two stainless steel screws with total length 3500 mm and working length about 3000 mm. Screws are driven by el motor 1.1 kW and reducer. Working rotation of screws up to 2.7 rpm. Each screw has a internal channel and is connected to cooling medium. Working pressure inside the shafts - up to 1.5 bar, temperature range from -10C up to +30C, volume - 2 x 18 l. Screws are working in jacketed tank. Width of tank 570 mm x length 3500 mm. Tank has volume about 430 l and is working on atmospheric pressure. Temperature range from -10 up to 0C. Tank has stainless steel jacket at bottom and side walls. Volume of jacket 40 l, working pressure up to 1.5 bar, working temperature range - from -10C up to +30C. Top of the tank is eq ...
used
Under table saw Wadkin Cutting width 300 mm Cutting height 80 mm pneumatically raised with rolling table and stop L 2.0 m L x W x H: 2.5 x 0.8 x 1.1 m Weight approx. 480 kg Built in 1975 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Stock# U2428-3 Used horizontal cooker by Berief Gmbh & Co. KG. with total volume 800 l. Cooking chamber has internal dimensions: diameter 1000 mm x lenght 1000 mm. Machine is rated for work on temperature up to 100 C inside the chamber. Heating channels have volume 55 l and are designed for work on pressure up to 10 bar and temperature up to 184 C. Tank is insulated and layered with stainless steel. Machine has mixing shaft with bolted 6 paddles, each one equipped with wall scrapper, and two side wall scrappers. Shaft is chain driven by el. motor 3 kW and gearbox. Discharge of tank by tilt, operated by el motor 0.55 kW. Top inlet has dimensions 100 cm x 54 cm, and is equipped with safety stainless steel bars and stainless steel cover. Machine is mounted on two supports integrated with drive and controls, however controls need rebuilding. Machine last time used in food industry.
used
We offer 6x Piston+linder-kit with ring set + bolts + liners with O-rings Al stock immediately available at stock: Piston: 6217-31-2130 Bolt : 6211-31-2410 Ring set: 6217-31-2030 Liner : 6218-21-2210 Net price / rate = 450 plus 19% tax MIW GmbH Motoren-Instandsetzungs-Werk North-West-Ring 8 D-27404 Zeven/Germany Phone: 0049(0) 4281-950583 Fax: 0049(0) 4281-950585 E-mail: info@miw-zeven
new
Inverter heat pumps / chiller air-cooled reversible, Type: iHCY 020 PT1+FSH M.T.A. S.p.A. HCYGNUS TECH Inverter iHCY 020 PT1+FSH are compact heat pumps reversible (heating / cooling) that are suitable for outdoor installation down to -15 / -10°C suction temperature. Includes crank pan heater, buffer tank, built-in P1 circulation pump, electric antifreeze heater (evaporator, storage tank and pump) and inverter scroll compressors Heat output kW 6.43 Heating water temp. Exit/Entry: 45 / 40°C Volume flow m³/h 1.13 Available pump pressure bar: 0.84 Ambient temperature +7 °C Cooling capacity kW 5.46 Cold water temp. Exit/Entry: 7 / 12°C Volume flow m³/h 0.971 Available pump pressure bar: 0.893 Ambient temperature 32 °C Refrigerant R 410A Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3 Max. power consumption (kW) 3.06 Max. current (A) 11.43 Start ...
new
Inverter heat pumps / chiller air-cooled reversible, Type: iHCY 020 PT1+FSH M.T.A. S.p.A. HCYGNUS TECH Inverter iHCY 020 PT1+FSH are compact heat pumps reversible (heating / cooling) that are suitable for outdoor installation down to -15 / -10°C suction temperature. Includes crank pan heater, buffer tank, built-in P1 circulation pump, electric antifreeze heater (evaporator, storage tank and pump) and inverter scroll compressors Heat output kW 6.43 Heating water temp. Exit/Entry: 45 / 40°C Volume flow m³/h 1.13 Available pump pressure bar: 0.84 Ambient temperature +7 °C Cooling capacity kW 5.46 Cold water temp. Exit/Entry: 7 / 12°C Volume flow m³/h 0.971 Available pump pressure bar: 0.893 Ambient temperature 32 °C Refrigerant R 410A Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3 Max. power consumption (kW) 3.06 Max. current (A) 11.43 Start ...
new
We offer 6xpiston+linder-kit with ring set + bolts + liners with O-rings Al stock immediately available at stock: Piston: 6217-31-2130 Bolt : 6211-31-2410 Ring set: 6217-31-2030 Liner : 6218-21-2210 Net price / rate = 450 plus 19% tax MIW GmbH Motoren-Instandsetzungs-Werk North-West-Ring 8 D-27404 Zeven/Germany Phone: 0049(0) 4281-950583 Fax: 0049(0) 4281-950585 E-mail: info@miw-zeven
new
Inverter heat pumps / chiller air-cooled reversible, Type: Cycnus iHCY 101 PT1+FSH MTA S.p.A. HCYGNUS TECH Inverter iHCY 101 PT1+FSH are compact heat pumps reversible (heating / cooling) that are suitable for outdoor installation down to -15 / -10°C suction temperature. Includes crank pan heater, buffer tank, built-in P1 circulation pump, electric antifreeze heater (evaporator, storage tank and pump) and inverter scroll compressors Heat output kW 25.2 Heating water temp. Exit/Entry: 45 / 40°C Volume flow m³/h 4.4 Available pump pressure bar: 0.616 Ambient temperature +7 °C Cooling capacity kW 22.8 Cold water temp. Exit/Entry: 7 / 12°C Flow rate m³/h 3.88 Available pump pressure bar: 0.694 Ambient temperature 32 °C Refrigerant R 410A Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3 Max. power consumption (kW) 12.51 Max. current (A) 30,41 Sta ...
new
Inverter heat pumps / chiller air-cooled reversible, Type: Cycnus iHCY 101 PT1+FSH MTA S.p.A. HCYGNUS TECH Inverter iHCY 101 PT1+FSH are compact heat pumps reversible (heating / cooling) that are suitable for outdoor installation down to -15 / -10°C suction temperature. Includes crank pan heater, buffer tank, built-in P1 circulation pump, electric antifreeze heater (evaporator, storage tank and pump) and inverter scroll compressors Heat output kW 25.2 Heating water temp. Exit/Entry: 45 / 40°C Volume flow m³/h 4.4 Available pump pressure bar: 0.616 Ambient temperature +7 °C Cooling capacity kW 22.8 Cold water temp. Exit/Entry: 7 / 12°C Flow rate m³/h 3.88 Available pump pressure bar: 0.694 Ambient temperature 32 °C Refrigerant R 410A Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3 Max. power consumption (kW) 12.51 Max. current (A) 30,41 Sta ...
used
Exhaust fan Tube ø 350 mm Fan ø ± 750 mm Engine 11 kW Built in 1995 Weight approx. 190 kg L x W x H: 100 x 80 x 100 cm The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/Ersatzteile durch MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Maschinenbau Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
new
Heat pump / chiller air-cooled, reversible, reversible Type: CYGNUS TECH HCY 031 PT1 MTA S.P.A. CYGNUS TECH HCY 031 PT1 are compact heat pumps / water chillers designed for outdoor installation up to -10°C suction temperature. Including crank pan heating, buffer tank and built-in P1 circulation pump. Heating capacity kW 11 Heating water temp. Exit/Entry: 45 / 40°C Flow rate m³/h 1.93 Available pump pressure bar 1.36 Ambient temperature 7 °C Cooling capacity kW 9.22 Cold water temp. Exit/Entry: 7 / 12°C Volume flow m³/h 1.56 Available pump pressure bar 1.54 Ambient temperature 35 °C Refrigerant R 410A Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3 Max. power consumption (kW) 5.4 Max. current (A) 9.7 Starting current circuit (A) 44.5 Protection class: IPX4 Dimensions: Depth mm 1404, Width mm 580, Height mm 1293 Weight kg 273 Conn ...
used
Stainless steel electric stove 1 plate, is located in a very good, clean and functional condition. -Manufacturer: Bartscher GmbH -Model: FO/E 31 Technical data: -SER. No.: FO/S 31-105.343 Plate diameter: 300mm -External dimensions: 500 x 500 x 500 -elek. Voltage: 400V -Frequency: 50 Hz -elek. Performance: 3.5kW
used
The JMC 407 is the top seller among our alligator scissors. It is cost-effective, has a sufficient knife length and enough power for most tasks in metal recycling. It is suitable for cutting many materials, such as profiles, pipelines, motors, transmission housings. The scissors are also frequently used for cleaning scrap metals or for cutting vehicle coolers. The machine has a control without electronics and a manually adjustable holder, which also acts as a protective hood. The scissors can be used by foot pedal in single or continuous operation. The opening width is adjustment via simple clamping screws.
used
GEA Canzler spiral heat exchangers with milk pipe fitting on the input and output, Operating pressure:-1 to 6 bar Operating temperature:-10 to 200 C ° Volume: 32 liters Area: 10 m2 Number of screws: 12 Empty weight: 400 kg
used
Machine type MIG/MAG inverter welding system Make Merkle Type MobiMIG 320 K Plant No. 118.362 Connection voltage 3 x 400 volts Setting range 25 - 320 amperes Switch-on time 40% ED at 300 amperes 60% ED at 270 amperes 100% ED at 240 amperes Current setting infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Design portable assembly system Wire feed gearbox 4-wheel gearbox DV 26 Hedging 16 Ampere Dimensions L x W x H 600 x 300 x 565 mm Weight 32 kg Age 6 months Condition workshop-tested new incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SBT 307 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reducer argon with 2 pressure meters 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 pie ...
new
Heat pump / chiller air-cooled, reversible, reversible Type: CYGNUS TECH HCY 031 PT1 MTA S.P.A. CYGNUS TECH HCY 031 PT1 are compact heat pumps / water chillers designed for outdoor installation up to -10°C suction temperature. Including crank pan heating, buffer tank and built-in P1 circulation pump. Heating capacity kW 11 Heating water temp. Exit/Entry: 45 / 40°C Flow rate m³/h 1.93 Available pump pressure bar 1.36 Ambient temperature 7 °C Cooling capacity kW 9.22 Cold water temp. Exit/Entry: 7 / 12°C Volume flow m³/h 1.56 Available pump pressure bar 1.54 Ambient temperature 35 °C Refrigerant R 410A Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3 Max. power consumption (kW) 5.4 Max. current (A) 9.7 Starting current circuit (A) 44.5 Protection class: IPX4 Dimensions: Depth mm 1404, Width mm 580, Height mm 1293 Weight kg 273 Conn ...
Complete Boilerhouse with 18 bar FR+K, Bay boiler with a steamproduction of 2500kg/h. The burner is a Weishaupt with a capacity from 1845KW The boilerhouse is complete with stack, feedwater tank, water softener and reversed osmose installation. year of manufacturing 1996. The installation is stil in full operating modus in Germany.
used
Labeler, floor labeler Herma GmbH Stuttgart Type Labelling unit PAX 230 V, 50 Hz very good condition, directly from production! 2 identical labelers available
used
Drilling, dowel and milling centre Stegherr FD-E For efficient doweling of corner joints in windows and doors, doweling of transoms, setting timber and central friezes as well as milling out recesses for fittings and door locks. 4 controlled servo axes (X, Y, Z, NC-Stop) Positioning stop NC-Stop Stop extension NC-Stop to 3200 mm Lateral workpiece pressure unit on machine table Increase of clamping height to 140 mm Workpiece scanning horizontally Vertical workpiece scanning Workpiece Length Measurement Horizontal milling unit: 3.5 kW, up to 15000 rpm, Vertical milling unit: 2.4 kW, up to 15000 rpm Drilling unit for one dowel drill bit at a time Drilling unit for one drill bit at a time D6 mm (Safety Signs) Drilling unit for holding multiple drill heads (Griffolive) Drilling unit for holding multiple drill heads (cup belt) Pneum. Swivel device for 2 pos. Extensi ...
new
Small shredder for various tasks such as old cables, plastics wood, etc. With hydraulic, electronically controlled feed. Drive 18.5 + 2.2 kW (rotor + feed). Rotor shaft with connectors for connecting a cooling device (e.g. when used for NYM old cables. The machine is 1 year old and little used from our demo machine inventory. The machine is offered with a one-year used machine warranty.
used
The machine is in good technical condition. Clamping surface of the table: 1760x500 mm Steering system: Heidenhain 17K011 Tool changer: automatic - 36 tools Max. workpiece weight: 600 kg Clamping system: DIN69871-A SK40 Number of revolutions: 40-8000 Machine dimensions: approx. 3800x2900x3100 mm Machine weight: 9500 kg By prior arrangement, the possibility of a tour in progress.
used
Ship unloading system TA 12/15 FA 38 of the manufacturer NEUERO Engelbrecht + Lemmerbrock GmbH & Co., Melle. Built in 1988 It is a pneumatic suction system for the extraction and conveyance of grain or similar pneumatically conveyable bulk materials from ships. Via a telescopic swivel arm and a suction nozzle, the material to be conveyed is sucked in by the air flow generated by the blower and conveyed into the suction separator. There, the material to be conveyed is separated from the suction air flow and discharged via the rotary valve. All motion drives of the telescopic boom are hydraulic. Electrical connection: 380 V Technical documentation of the manufacturer and various invoices for replacement parts available. A magnetic separator was retrofitted. The rotary valve was replaced in 2018 (EUR 8,875) and has not been used much since then. New filters available. ...
new
Small vibrating sieve with two decks for three fractions. The diameter of the sieve inserts is 400 mm. This includes a bet with balls that keep the screen insert clean from below. This is suitable, for example, for the screening/classification/quality assurance of copper granules (contamination by plastics or aluminium are sifted) or for the re-treatment of plastic granules from the cable recycling. The sieve is located in our demo pool and is little needed.
used
Manufacturer GEMINIS Model GHT-4 720 x 3000 Year 2004 CNC FAGOR 8055 TC/B Capacities and feeds Max. swing over bed 720 mm. Max. swing over cross slide 470 mm. Height of centres from flat guide 366 mm. Distance between centres 3.000 mm. C Axis and driven tools INCLUDED Fast feedrate X/Z axis 8.000 mm/min Work feedrate X/Z axis 8.000 mm/min Headstock Main spindle bore diameter 92 mm. Main spindle nose DIN-55027-11 Spindle diameter on front bearing 150 mm. Spindle speed 0-1600 Spindle automatic ranges 2 Main spindle power 17 / 20,5 kW Spindle torque 1590 / 1920 Nm Tailstock Ø Tailstock Quill 100 mm Tailstock travel 200 mm Taper Morse 6 Bed Width 430 mm. Height up to flat guide 775 mm. Turret Turret type Sauter VCI50 Ø400 mm. Driven tool position at turret 8 Driven tool power 5.5 kW Additional equipment 3 jaw auto-centering chuck SHW Autoblock 315 BH ...
used
Briceder press RSN SP 250 P Don't. # 02 782 Without a control cabinet/control Without hosting 700 l cooling water tank available for hydraulick units L x B x H: 120 x 80 x 120 cm Built in 1992 Weight about 750 kg Dismantling by buyers The machine is in good condition, operational. Changes, errors, intermediate sales reserved! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Key data: 75 , 10 , 11
BOGE screw compressor S 100-3 air-cooled Ready-to-use, automatic, with CE mark Specifications Effective delivery quantity of the entire system measured according to ISO 1217, Annex C 11.00 m³/min at maximum compressor overpressure 10 bar Nominal power main drive motor 75.00 kW Nominal power fan motor 2.20 kW Degree of protection/insulating material class of the motor IP 55 / F Operating voltage (compressor) 400 V / 50 Hz Control voltage (compressor) 230 V AC / 24 V DC Intake or ambient temperature (min... max) +5...+40 °C Compressed air outlet over intake temperature (at compressor) 12 K Cooling air volume flow (with duct connection) 9200.00 m³/h Residual oil content of compressed air < 3 mg/m³ Soundproofed design (according to dimensional drawing): M 3200.0970 Sound pressure level (according to DIN EN ISO 2151) 80 dB(A) Width / Depth / Height 2 ...
new
Heavy peeling machine from also for thick cables up to approx. 110 mm diameter. Cable stripping machine for PVC and lightly reinforced cables. Easy adjustment of the knives by handwheel. Cables are cut from both sides at the same time, so that the remittation drops slightly. Knife individually adjustable by spindle for different strength swelling. Double spindle for precise adjustment of the cable thickness. Two separate 1.5 kW motors for a lot of power when pulling through the cables
used
Process air cooler/ chiller/ chiller, air-cooled, Type: TAEevo Tech 161 P3 MTA S.p.A. TAEevo Tech 161 are air-cooled compact water chillers that are suitable for outdoor installation. Including crank pan heating, phase monitoring, buffer tank 255 ltr. and built-in P3 Circulating pump. Cooling capacity kW 38.6 Cold water temp. Exit/Entry (°C): 7 / 12 Flow rate (m³/h) 6.58 Available pump pressure (bar) 2.59 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max. power consumption (kW) 21 Max. current (A) 36 Starting current circuit (A) 204 Protection class: IP54 Dimensions: Length (mm) 1862, Width (mm) 761, Height (mm) 1437, Weight (kg) 666 Connection Rp 1 1/2" Serial No.: 2200401928 Year of construction 2023 Condition: Optical 2, Technically ok used (Subject to technical changes and prior ...
used
Process air cooler/ chiller/ chiller, air-cooled, Type: TAEevo Tech 161 P3 MTA S.p.A. TAEevo Tech 161 are air-cooled compact water chillers that are suitable for outdoor installation. Including crank pan heating, phase monitoring, buffer tank 255 ltr. and built-in P3 Circulating pump. Cooling capacity kW 38.6 Cold water temp. Exit/Entry (°C): 7 / 12 Flow rate (m³/h) 6.58 Available pump pressure (bar) 2.59 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max. power consumption (kW) 21 Max. current (A) 36 Starting current circuit (A) 204 Protection class: IP54 Dimensions: Length (mm) 1862, Width (mm) 761, Height (mm) 1437, Weight (kg) 666 Connection Rp 1 1/2" Serial No.: 2200401928 Year of construction 2023 Condition: Optical 2, Technically ok used (Subject to technical changes and prior ...
used
Vibrorinne MATEC drive rear Overtime separation and â repatriation Vibro Drive 1 electric motor 3 kW Linder nominal width inside 500 mm Preparing for 1700 mm Linen nominal length 4000 mm Peasant sheet seal unit perforation 20 mm Weight about 560 kg Built in 2018, new The machine is in very good condition, operational. Changes, errors, intermediate sales reserved! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Magnetic drum MATEC For iron capture Length about 400 mm Drive about 0.37 kW Gearbox engine with tin slide Weight about 150 kg Built in 2018, new The machine is in very good condition, operational. Changes, errors, intermediate sales reserved! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Process chiller / chiller air-cooled, Type: TAEevo Tech 802 P3-20 MTA S.p.A. TAEevo Tech 802 P3-20 are air-cooled compact water chillers that are suitable for outdoor installation (from -20°C to +46°C). Including crank pan heating, phase monitoring, electronic fuel injectors, buffer tank 678 ltr. and built-in P3 circulation pump. Cooling capacity kW 159 Cold water temp. Exit/Entry (°C): 7 / 12 Flow rate (m³/h) 27.1 Available pump pressure (bar) 3.13 Ambient temperature (°C) 32 Refrigerant R 410A, Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max. power consumption (kW) 79.48 Max. current (A) 142.2 Starting current circuit (A) 286.2 Protection class: IP54 Dimensions: Length (mm) 3535, Width (mm) 1250, Height (mm) 2151, Weight (kg) 2192 Connection Rp 3" Serial No.: 2200356834 Year of construction 2020 Condition: Optical 2 , Technically ...
new
Slanted elevator with Rätzmühle RM4 Technical data: Nominal output up to 3 000 kg/h Power: Slanted elevator 0.55 kW Mill 4/3.3 kW Circumcate pump 2.2 kW Electric connection 400V 50Hz (3 phases) Electrical protection 32 A Dimensions: Length 3 540 mm Width 935 mm Height 2 585 mm Discard or drop-in height 850 mm Weight 350 kg Material 1,4301/AISI 304 Connections: Connection for cleaning 1/2 "inside Connection for washing containers 2 "outside Height corn chee-ejection 1 570 mm Can be used for nuclear and stone fruits, berries, vegetables Delivery 7 mm, 9 mm and 12 mm cutting sieve
used
Process chiller / chiller air-cooled, Type: TAEevo Tech 802 P3-20 MTA S.p.A. TAEevo Tech 802 P3-20 are air-cooled compact water chillers that are suitable for outdoor installation (from -20°C to +46°C). Including crank pan heating, phase monitoring, electronic fuel injectors, buffer tank 678 ltr. and built-in P3 circulation pump. Cooling capacity kW 159 Cold water temp. Exit/Entry (°C): 7 / 12 Flow rate (m³/h) 27.1 Available pump pressure (bar) 3.13 Ambient temperature (°C) 32 Refrigerant R 410A, Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max. power consumption (kW) 79.48 Max. current (A) 142.2 Starting current circuit (A) 286.2 Protection class: IP54 Dimensions: Length (mm) 3535, Width (mm) 1250, Height (mm) 2151, Weight (kg) 2192 Connection Rp 3" Serial No.: 2200356834 Year of construction 2020 Condition: Optical 2 , Technically ...
used
Fitting drill Ganner L x W x H: 1.20 x 0.80 x 1.40 m + stops Weight approx. 400 kg Built in 1987 The machine is in good condition, ready for operation. Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Process air cooler/ chiller/ chiller, air-cooled, Type: TAEevo Tech 902 P3 MTA S.p.A. TAEevo Tech 902 P3 are air-cooled compact water chillers that are suitable for outdoor installation (from -5°C to +46°C). Including crank pan heating, phase monitoring, buffer tank 950 ltr. and built-in P3 circulation pump. Cold water outlet temperatures from -10°C to +30°C can be adjusted. Cooling capacity kW 178 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 30.4 Available pump pressure (bar) 3.16 Ambient temperature (°C) 32 Refrigerant R 410A, Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max. power consumption (kW) 90 Max. current (A) 160 Starting current circuit (A) 365 Protection class: IP54 Dimensions: Length (mm) 4655, Width (mm) 1250, Height (mm) 2151, Weight (kg) 2907 Connection Rp 3" Serial No.: 2200360489 Year of constru ...
used
<b>Features:</b> Used pallet roller conveyor from Pack & Roll GmbH Fuesse to order separately Geraeuscharm Condition: fully functional with traces of use Ideal for fast material transport Professionally dismantled and packaged Color: Silver Drive: Gravity Total 14.58m plug available <b>Technical data: </b> Dimensions of the roller conveyor Total quantity in stock: approx.: 14.580mm Length per segment: 3645mm Total width: 1150mm One brake roller is available per segment Diameter of brake roller: 90mm <b>Details of the role</b> Clamping length: 1055mm Diameter approx.: 60mm Axis distance: 130mm, adjustable Material: steel, galvanized <b>Information on the framework</b> Height: 80mm Width: 40mm <b>Pallet roller conveyor</b> The roller conveyor is ideal in the picking zone for int ...
used
Table belt grinding machine Bürkle L x W x H: 3.5 x 1.7 x 1.8 m Built in 1963 Weight approx. 650 kg The machine is in good condition, ready for operation. Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Process air cooler/ chiller/ chiller, air-cooled, Type: TAEevo Tech 902 P3 MTA S.p.A. TAEevo Tech 902 P3 are air-cooled compact water chillers that are suitable for outdoor installation (from -5°C to +46°C). Including crank pan heating, phase monitoring, buffer tank 950 ltr. and built-in P3 circulation pump. Cold water outlet temperatures from -10°C to +30°C can be adjusted. Cooling capacity kW 178 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 30.4 Available pump pressure (bar) 3.16 Ambient temperature (°C) 32 Refrigerant R 410A, Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max. power consumption (kW) 90 Max. current (A) 160 Starting current circuit (A) 365 Protection class: IP54 Dimensions: Length (mm) 4655, Width (mm) 1250, Height (mm) 2151, Weight (kg) 2907 Connection Rp 3" Serial No.: 2200360489 Year of constru ...