321 offers

Category: 503: shredders
New in: used
Price: request quote
Location: Land-de DE 36419 Buttlar, Hauck 8
Seller: Reinhard

Mutton 750, BJ. 2003, 2012 new 350hp CAT diesel for 3.900Bh, total mileage of the machine CA 6.900Bh, new belt on the discharge conveyor, Funk, hydr. Wheel axle, after breaking bar. Shredder mutton 750 D built in 2003, in 2012 a new CAT diesel engine, with this 2012 is engine Hey machine 3.900 working hours running, the total working hours from the machine would be 6,900 working hours, new conveyour, remote control hydr. Wheel axle, breaker bar. How to contact with under: 0049 160 96232593 or e-mail at: rerec@web.de

Category: 212: peripheral equipment (e.g. heating, conveying, drying)
New in: used
Price: used machinery auction RESALE 500 €
Location: Land-gb GB United Kingdom, DH9 8UJ Stanley
Seller: Surplex GmbH

Weight approx.: 1000 kg Dimensions (l x w x h) approx.: 2000 x 2000 x 1800 mm Description: Compact Wood Waste Shredder

Category: 209: other wood working machines
New in: 2000
Price: 6.200 €
Location: Land-de DE 40764 Langenfeld
Seller: Tischlerei Bracht GbR

Thrust ground, crushers, shredders for chipboard, solid wood and the crushed pallets A video of the current machine can be sent on request. Hopper size, approx. 600 x 800 x 900 mm Rotor length 600 mm, rotor diameter 248 mm Low-speed Engine 18, 5kW PLC control system Sieve diameter top 20 mm, bottom 15 mm Rotor with 30 blades Sliding floor load-dependent control The knives are freshly turned and can be rotated up to six again Suction connector 160 mm Operating instructions CE mark Without shown black cord. Hacker was repainted V-belt replaced new machine feet Renewed oil and transmission fluid Dimensions approx. 1800 x 1100 x 1650 mm (Lxwxh). Weight approx. 1300kg.  ...

Category: 503: shredders
New in: 1996
Price: 9.900 €
Location: Land-nl NL Niederlande
Seller: OBM Recycling Machinery B.V.

Manufacturer Bollegraaf Type AS-75/850 Order-No. 96010.060 Year of construction 1996 Driving motor 75 kW Width feed channel 850 mm Quantity of waves 6 waves in the rotor Qantitity of hammers 72 piece (6 waves with 12 hammer/wave) Screen size 60 x 60 mm Throughput capacity 2,000 up to 7,000 kg/hour, depending on the size of the comminution Transport dimensions only the mill approx. 2.670 x 2.040 x 2.565 mm (w x d x h) Machine weight baler approx. 7,5 tons Description: The Bollegraaf hammer mills are characterised by a heavy steel construction with a wall thickness of 20 mm. The rotor and hammers are made of high-alloy steel. The two sieves can be swivelled in and out, whereby the size and th ...

Category: 505: other machinery for waste disposal and recycling
New in: used
Price: request quote
Location: Land-it IT 13875 PONDERANO, VIA ANTONIO GRAMSCI 48
Seller: GERMANPLAST SRL

WASHING LINE Constructor : Viplat for PE PP Average output 800 kg/h optional : shredder or grinder, metal detector, belt STAINLESS STEEL LOADING HOPPER STAINLESS STEEL WASHING and FLOAT-SINK SEPARATING  BATH constructed with 3 mm. thick foil in AISI 304, with gearbox, motorized moving rolls with paddles + stainless steel extraction roll  and auger for floating materials + stainless steel bottom extraction auger for sunk material +  motorized with 62 pneumatic valve for mud + manual valve for water outlet 22 kw HORIZONTAL CENTRIFUGE :shovels, mesh, inlet, decagon, outlet mouth and covers made in  stainless steel , the rest is made in carbon steel  with air sprays  for automati ...

Category: 503: shredders
New in: 1990
Price: 3.900 €
Location: Land-nl NL Niederlande
Seller: OBM Recycling Machinery B.V.

Manufacturer De Breuk Typ AV-45/80 Year of construction 1990 Driving motor 45 kW Screen size 95 x 30 mm In use for Shred of paper, books, complete document files etc. Comments: Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Category: 107: sheet metal working
New in: 1989
Price: request quote
Location: Land-de DE
Seller: Reinhold Schmitt GmbH

FOR ALUMINIUM THIN STRIP material width 1.300 mm for end width bigger than 100 mm 1.200 mm for end width equal and smaller than 100 mm material thickness 50-240 Mu coil weight speed m/min working direction left - right line consisting of: coil storage coil width 1.600 mm coil diameter 1.600 mm coil weight max 8.000 daN capacity 4 coils coil car decoiler width 2.000 mm length 1.700 mm height 650 - 1.460 mm speed 3,5 - 7,0 m / min. drive three-phase a.c. motor hydraulic system for coil car shear lift table complete unit drive three-phase motor N = 3 kW roller table speed 6 m / min. drive worm screw gear motor 0,33 kW tilting unit decoiler coil diameter 1.600 mm co ...

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Lump breaker, Make Netzsch-Condux, Type CEB 255 / 400 L, No 6655, New 1995, Material stainless steel, Rotor sizes dia. 250mm, Inlet 420x295 mm, Outlet 420x295mm, Motor 11 KW, 500 Volt, Mounted on frame, Floorspace 1,6x0,8 M, Total height 1,4 MLUMP BREAKERSBREAKERS > LUMP BREAKERS What you can expect from Foeth: ?Machine is in working condition ?At a reduced price compared to new ?Ready for shipping to any destination worldwide ?You are welcome to inspect the machine in Barneveld, The Netherlands. Visit our website FOETH dot COM for many more machines!

Category: 308: other machines for plastic
New in: used
Price: request quote
Location: Land-it IT 13875 PONDERANO, VIA ANTONIO GRAMSCI 48
Seller: GERMANPLAST SRL

BANO 1300 single shaft shredder with spinner Construction year 2000 Motor power 75 Kw Hydraulic power unit 4 kw Rotor with 120 plates Rotor speed 120 g / min Grid 40 mm Overhauled electrical panel CE machine

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Shredder, Make Moco Maschinen, Type AZ 14 E/510, No 7970 AL 21612-1, New 2012, Double shaft, Material stainless steel, Rotor sizes +/- dia 300mm, Shredder surface +/-650x600mm, With hopper, Inlet 910x860mm, Outlet +/- 300x250mm, Motor 15,0 KW, 230/400 Volt, Rotor speed 23 omw./min, Mounted on frame, With switch, With switchgear, Floorspace 2,0x1,2 M, Total height 2,0 M, Weight 1500 KGSHREDDERSBREAKERS > SHREDDERS What you can expect from Foeth: ?Machine is in working condition ?At a reduced price compared to new ?Ready for shipping to any destination worldwide ?You are welcome to inspect the machine in Barneveld, The Netherlands. Visit our website FOETH dot COM for many more machines!

Category: 503: shredders
New in: 2001
Price: request quote
Location: Land-de DE 28816 Stuhr/Bremen - Germany, Gutenbergstr. 22
Seller: RDA Recycling Machinery GmbH

Untha 4-shaft shredder with screw conveyor and discharge belt Technical specification Manufacturer Untha Type RS 60-4-S Year of construction 2001 Motor 74 kW Drive Belt drive Cutting chamber 960 x 860 mm Cutting shafts 4 Sieve size approx. 100 mm Speed main shafts 17-21 Speed secondary shafts 21-25 Throughput up to 5 t/h Dimension approx. 3150 x 1620 x 3230 mm (LxWxH) Machine weight approx. 5000 kg

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Shredder (1x), Material mild steel, Shredder surface 250x250mm, Inlet 250x270mm, Motor 2 KW, 220/380 Volt, Mounted on frame, With switchgear, Floorspace 1,0x1,0 M, Total height 2,0 MJAW BREAKERSBREAKERS > JAW BREAKERS What you can expect from Foeth: ?Machine is in working condition ?At a reduced price compared to new ?Ready for shipping to any destination worldwide ?You are welcome to inspect the machine in Barneveld, The Netherlands. Visit our website FOETH dot COM for many more machines!

Category: 503: shredders
New in: used
Price: request quote
Location: Land-de DE 36419 Buttlar, Hauck 8
Seller: Reinhard

Doppstadt DW 3060, Mercedes diesel, only 3, 500h, magnetic tape, low band new. Doppstadt DW 3060, Mercedes diesel, only 3,500 working hours, magnetic conveyour, sobordinate new. Contact: 0049 160 96232593 or mobile: rerec@web

Category: 1900: general inventory
New in: 1993
Price: used machinery auction RESALE 80 €
Location: Land-de DE Germany, 49525 Lengerich
Seller: Surplex GmbH

Weight approx.: 150 kg Dimensions (l x w x h) approx.: 1020 x 800 x 1300 mm Description: Motor 1.6 kW, opening width approx. 50 x 30 mm, including wall base frame

Category: 503: shredders
New in: 2002
Price: request quote
Location: Land-de DE 88368 Bergatreute, Ravensburger Str. 35
Seller: Schreinerei Faessler

Hacker for wood or plastic with strong motor Engine width 800 mm engine power 37 kw hole screen 18 mm

Category: 212: peripheral equipment (e.g. heating, conveying, drying)
New in: 1991
Price: used machinery auction RESALE 12.000 €
Location: Land-ch CH Switzerland, 8854 Siebnen
Seller: Surplex GmbH

Weight approx.: 33000 kg output: 30000 kg / h Dimensions (l x w x h) approx.: 18000 x 3700 x 3800 mm daylight opening: 5800 x 2700 x 700 mm main motor: 268 kW setting measure approx (l x w x h): 18000 x 3700 x 3800 mm dimension of extraction socket: 700 mm number of shafts: 3 Description: BÜHLER / CATERPILLAR ZBH TRIMALIN 800x2500 Chipper The screw mill is suitable for the following shredding: wood, bulky waste, green wasate, household waste, industrial waste and others, operating hours approx. 2084 h, capacity approx. 30 to/ h, drive of the 3 shredding shafts via three closed cycles with steplessly adjustable axial piston pumps, driven by a Diesel aggregate brand CATERPILLAR, type 3406 DI- ...

Category: 308: other machines for plastic
New in: 2013
Price: used machinery auction RESALE 75.000 €
Location: Land-de DE 89231 Neu-Ulm
Seller: Industrierat GmbH

Shredder, Fabr. Miroslavske Strojírny, type CL-300/12-A2, 2013, serial No. 01-2013, consisting of die-cutting machine, conveyors for the dryer, spiral distribution, floor drying, Vibrationssortiersieb, conveyors to the bagging plant including ionization unit, weighing unit with Label printers, scales, maximum weighing capacity of 1,500 kg

Category: 504: sieving machines
New in: 1994
Price: request quote
Location: Land-at AT
Seller: Kleinheider Baumaschinenhandel GmbH

7 to., double deck 2440x1220 mm, bunker, 3200x1500 shredder; Power [PS]: 32; Gross weight [kg]: 7000; Engine: Deutz F 3 L 1011

Category: 503: shredders
New in: 1991
Price: request quote
Location: Land-pl PL 43300 Bielsko-Biala, ul. Gen. St. Maczka 9
Seller: ARTechnic

Max. pressure: 9 tons Year of production: 1991 Unit pressure: 36 tons/m² Cross-section of the channel: 500 x 500 mm Filling inlet: 400 x 450 mm Supply: 400 V/ 3,5 kW Bale tying: manual Shredders Cutting width: 3,8 x 40 mm Year of production: 1991 Supply: 400 V / 7,5 kW Security leve: P4 DIN 66399-1 F2 DIN 66399-1 pkt. 5.2 The machine is fully operational and after service. PREMIUM paint renovation - subcharge Kontakt: Englisch - Ewelina Pekala +48 696 072 985 Deutsch - Ewelina Pekala +48 696 072 985 Polnisch – Ryszard £uba +48 501 330 786 Russisch – Alina Hykava +48 795 135 939

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Granulating sieve Grater/shredder (1x) make Alexanderwerk, Type R-300, No 040-09775, New unknown, Material stainless steel, Rotor sizes dia. 290mm, Sieve sizes dia. 300x170mm, Inlet dia. 200mm, Motor 4,0 KW, 500 Volt (Ex), Mounted on stainl. st. frame, Mounted on wheels, Floor space 1,6x0,8 M, Total height 1,5 M, Weight 250 KGSIEVE GRANULATORSSIEVES > SIEVE GRANULATORS

Category: 503: shredders
New in: 2004
Price: request quote
Location: Land-de DE 28816 Stuhr/Bremen - Germany, Gutenbergstr. 22
Seller: RDA Recycling Machinery GmbH

Erdwich 2-shaft shredder M480/2-750, mounted on roll-off container, for mobile use, suitable for tires, wood, plastics, metal Technical data: Manufacturer Erdwich GmbH Type M480/2-750 Year of construction 2004 Motor 22 kW Amount of stator knives 2 Cutting unit size 758 x 800 mm (LxW) Width of rotor knife 50 mm Machine weight approx. 3300 kg Total weight incl. contaner approx. 7000 kg

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Make Werner und Pfleiderer, Type UK-19 VIH SUI, No 121421, New 1964, Material mild steel, Jacket, Test pressure, Arm speed 29 Rpm, Capacity 2250 Ltr. (usefull 1500 Ltr.), Double shaft kneader Shredder blade arms (1x), Single geared, Trough sizes 1340x1450x1300mm, With adjustable packing glands, With hydraulic tilting, Working pressure 6 Bar, Motor 75 KW, 220/380 Volt, Floorspace 3,7x5,7 M, Total height 2,5 M, Weight ± 16.000 KGKNEADERSKNEADERS > KNEADERS

Category: 503: shredders
New in: used
Price: request quote
Location: Land-de DE 28816 Stuhr/Bremen - Germany, Gutenbergstr. 22
Seller: RDA Recycling Machinery GmbH

BOA shredder of type SH 750-150 SL, inspected and tested in 2017, suitable for bulky waste, feeding aperture 2.150 x 1.500 mm, drive power 55 kW, with adjustable feeding tunnel Technical specifications Manufacturer BOA, Netherlands Type SH 750-150 SL Drive power of crushing shaft 55 kW (fluid drive) Feeding length 2.150 mm Width of feeding aperture 1.500 mm Feeding opening 1.400 mm Height of feeding aperture with shock absorbing feet 700 mm new clutch

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Shredder (1x), Make Bohmter Maschinenfabrik, Type U 10, No 30426, New 1974, Material mild steel, Shredder surface 200x250mm, With hopper, Inlet 380x280mm, Motor 3 KW, 220/380 Volt, Mounted on legs, With switchgear, Floorspace 0,6x0,6 M, Total height 1,9 MJAW BREAKERSBREAKERS > JAW BREAKERS

Category: 503: shredders
New in: 2006
Price: request quote
Location: Land-de DE 49377 Vechta
Seller: Hawamex Recycling und Umwelttechnik GmbH & Co. KG

Rear discharge conveyor Overband magnetic separator Hydr. self-propelled drive (for moving on site) Radio remote control Rubber conveyor belts new Mercedes Diesel engine: < 1.000 hours

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Shredder (1x), Make Bohmter Maschinenfabrik, Type U/10, No 30177, New 1969, Material mild steel, Shredder surface 200x250mm, With hopper, Inlet 265x380mm, Motor 3,0 KW, 220/380 Volt, Mounted on legs, With switch, Floorspace 0,6x0,6 M, Total height 1,7 MJAW BREAKERSBREAKERS > JAW BREAKERS

Category: 503: shredders
New in: 2008
Price: request quote
Location: Land-de DE 49377 Vechta
Seller: Hawamex Recycling und Umwelttechnik GmbH & Co. KG

2 crushing shafts for ARJES VZ 750 D.

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Jaw crusher (1x), Make Werkhuizen Schepens Dendermonde, Type Bekkenbreker CM-3, No 70-1936-008, New 1997, Material mild steel, Shredder surface 630x400mm, Motor 11,0 KW, 220/380 Volt, Floorspace 1,5x1,2 M, Total height 0,8 MJAW BREAKERSBREAKERS > JAW BREAKERS

Category: 503: shredders
New in: new
Price: 5.000 €
Location: Land-pl PL 89412 Sosno, Wodna 10
Seller: Bartontech

PET bottles Perforator – New machine! The machine has the possibility to be connected to bailing presses. Net price: 5000 euro’s Technical description: • engine: 2 x 1,5 kW • 2 rollers for perforation of PET bottles • rollers rotation: 36 times per minute • inlet: 1m x 1 m • productivity: 2 tons per hour • new machine – polish product! We assure 12 months of warranty and technical service also after this period. Delivery time: till 2 weeks If you have any questions, please contact us! Telephone: +48 783 891 132 or e-mail adress: biuro@bartontech.pl / bartontech.eu@gmail.com Our webpage: abc.bartontech.eu

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Shredder, Make Kusters Venlo, No 60195/2, New 2006, Double shaft, Material stainless steel (hopper + breaker), With hopper, Inlet 600x400x240mm, Outlet 150x150mm, Motor 1 kW, 3x 400 Volt, Mounted on legs, With switchgear, Floorspace 1.5x0.9m, Total height 2.1m, Weight 600kg, Extra Specifications SHREDDERSBREAKERS > SHREDDERS

Category: 503: shredders
New in: 1992
Price: request quote
Location: Land-de DE Bavaria
Seller: Hawamex Recycling und Umwelttechnik GmbH & Co. KG

Diesel engine: 450 HP

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Shredder, Make Kusters Venlo, No 60195/3, New 2006, Double shaft, Material stainless steel (hopper + breaker), With hopper, Inlet 600x400x240mm, Outlet 150x150mm, Motor 1 kW 3x 400 Volt, Mounted on legs, With switchgear, Floorspace 1,5x0,9m, Total height 2,1m, Weight 600kgSHREDDERSBREAKERS > SHREDDERS

Category: 504: sieving machines
New in: 2015
Price: request quote
Location: Land-de DE 49377 Vechta
Seller: Hawamex Recycling und Umwelttechnik GmbH & Co. KG

The hook lift border grain separator HS 401 separates material break from each group. Screen size: 0-100 mm, variable by changing the speed. Simple and robust construction, no electrics, drive by auxiliary hydraulics from the pre-shredder. Video of the manufacturer: https://www.youtube.com/watch?v=nzRin4pvHB8

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Shredder, Make Kusters Venlo, No 60193/6, New 2006, Double shaft, Material stainless steel (hopper + breaker), With hopper, Inlet 600x400x240mm, Outlet 150x150mm, Motor 1 kW 3x 400 Volt, Mounted on legs, With switchgear, Floorspace 1,5x0,9m, Total height 2,1m, Weight 600kgSHREDDERSBREAKERS > SHREDDERS

Category: 503: shredders
New in: 1996
Price: request quote
Location: Land-de DE 49377 Vechta
Seller: Hawamex Recycling und Umwelttechnik GmbH & Co. KG

Diesel engine: 420 HP Equipment: rear discharge conveyor, hydr. self-propelled drive (creep speed), remote control

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Shredder with elevator belt (1x), Make Dipl. Ing. Gössling & Co. Schermbeck, No 247/2008/582, New unknown, Material mild steel, Shredder surface 295x210mm, With hopper, Inlet 740x450mm, Motor 0,55 KW, 220/380 Volt, With variable speed drive, With switchgear, Floorspace 3,5x1,5 M, Total height 3,7 M, Weight 1500 KG, Extra Specifications - Outlet height elevator belt: 3000mmJAW BREAKERSBREAKERS > JAW BREAKERS

Category: 503: shredders
New in: 2014
Price: request quote
Location: Land-kr KR 407-8 Seoul, Seoul South Korea
Seller: BMJ KOREA

Waste tire shredding machine MAKE:Dokyung(Korea) Year:2014 (1) shredding machine 1st part 1st shredding machine:300hp -main frame part -main shaft part -drive part -hydraulic unit part -electric part CONVEYOR 4SET Cap':8~10Ton/hr Size:1,200x1,200x1,200mm Type:Shredding Type Rotation Diameter:?590 Main motor:(300HP) Main Motor RPM:1760 Gear box Ratio:1/38 Rotor Materila:SCM440 Rotor R.P.M:31RPM (2)2nd part 2nd shredding machine(500mm below) 150hp -main frame part -main shaft part -drive part -hydraulic unit part -electric part CONVEYOR 2SET Name of Machine:?1 Liberator M/C Cap' ...

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Shredder, Make Kusters Venlo, No 60193/1, New 2006, Double shaft, Material stainless steel (hopper + breaker), With hopper, Inlet 600x400x240mm, Outlet 150x150mm, Motor 1 kW, 3x 400 Volt, Mounted on legs, With switchgear, Floorspace 1,5x0,9m, Total height 2,1m, Weight 600kg, Extra Specifications SHREDDERSBREAKERS > SHREDDERS

Category: 701: basic foodstuffs and animal feeds machines
New in: used
Price: request quote
Location: Land-de DE 26871 Papenburg, Helgenstr. 25
Seller: Maschinen und Mühlenbau Benker

Nestro shredder

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Shredder, Make Kusters Venlo, No 60193/2, New 2006, Double shaft, Material stainless steel (hopper + breaker), With hopper, Inlet 600x400x240mm, Outlet 150x150mm, Motor 1 kW 3x 400 Volt, Mounted on legs, With switchgear, Floorspace 1,5x0,9m, Total height 2,1m, Weight 600kgSHREDDERSBREAKERS > SHREDDERS

Category: 501: granulation plants
New in: 2017
Price: request quote
Location: Land-de DE 28816 Stuhr/Bremen - Germany, Gutenbergstr. 22
Seller: RDA Recycling Machinery GmbH

Complete cable granulating plant Diebels, with pre-shredder, cutting mill, wet separation table, conveyors and permanent magnet Constructed in 2017 Technical data: Pre-shredder Manufacturer Wagner, Österreich Type WS 15 Year of construction 2017 Drive power 15 kW Hours of operation 134 Feed opening 1.400 x 1.300 mm Work area 675 x 600 mm Rotor length 675 mm Rotor diameter 308 mm Number of knives 44 Dimension 2.040 x 1.280 x 1.825 mm (LxWxH) Weight approx 1.400 kg Permanent magnet Manufacturer Diebels Model CP 15/40 Width Max 400 mm Cutting mill Manufacturer ICS Contec Type RMH 6 D Year of construction 2017 Drive power 30 kW Capacity Max. 420 kg/h Dimensions 3.080 ...

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Shredder, Make Kusters Venlo, No 60193/3, New 2006, Double shaft, Material stainless steel (hopper + breaker), With hopper, Inlet 600x400x240mm, Outlet 150x150mm, Motor 1 kW 3x 400 Volt, Mounted on legs, With switchgear, Floorspace 1.5x0.9m, Total height 2.1m, Weight 600kgSHREDDERSBREAKERS > SHREDDERS

Category: 703: meat and fish processing machines
New in: used
Price: request quote
Location: Land-be BE 8550 Zwevegem, Wulfsbergstraat 6
Seller: Barsso NV

flaker for frozen products (fish, meat, vegetables, etc...) for blocks of max. 550 x 500 x 230 (l x w x h) 3 x 400 V 10 kW dimensions of the machine (l x w x h) : ± 2.300 x 1.400 x 1.300 mm

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Granulating sieve Grater/shredder (1x), Make Alexanderwerke, New unknown, Material aluminium, Rotor sizes dia. 300mm, With hopper, Motor 3,7 KW, 380 Volt, Floor space 1,3x0,7 M, Weight 200 KGSIEVE GRANULATORSSIEVES > SIEVE GRANULATORS

Category: 503: shredders
New in: 2007
Price: request quote
Location: Land-de DE 49377 Vechta, Vechtaer Marsch 9 / Ecke Alter Flugplatz
Seller: Hawamex Recycling und Umwelttechnik GmbH & Co. KG

Diesel engine: 430 HP Fine shredding basket Rear discharge conveyor Hydr. self-propelled drive (for moving on site) Radio remote control

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Granulating sieve Grater/shredder (1x), Make Alexanderwerk, Type R-300, No 039-09709, New unknown, Material stainless steel, Sieve sizes dia. 300x130mm, Sieve perforation dia. 10mm, Without hopper, Inlet dia. 270mm, Motor 3,6 KW, 230/400 Volt (Ex), Mounted on stainl. st. frame, Mounted on wheels, With switch, Floor space 1,1x1,2 M, Total height 1,3 M, Weight 340 KGSIEVE GRANULATORSSIEVES > SIEVE GRANULATORS

Category: 503: shredders
New in: 2005
Price: request quote
Location: Land-de DE 36419 Buttlar, Hauck 8
Seller: Reinhard

Jenz hacker type HEM 561 built. 2005 PTO with Farmi crane. Shipper type Jenz HEM 561 built-in in 2005, PTO, loading cran Farmi. Contact: rerec@web.de or mobile: 0049 160 96232593

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Granulating sieve Grater/shredder (1x), Make LB Bohle, Type PRS-300, No 9604078002, New 1996, Material stainless steel, Sieve sizes dia. 300x150mm, Sieve perforation ± dia. 3mm, With hopper, Inlet dia. 250mm, Outlet dia. 290mm, Motor 400 Volt, 16A, With variable speed drive (frequency inverter), Speed 0-208 Rpm, Mounted on stainl. st. frame (Bohle lifting column type PH-200), Mounted on wheels, With switchgear, Floor space 1,8x1,1 M, Total height 2,0 M, Weight 550 KGSIEVE GRANULATORSSIEVES > SIEVE GRANULATORS

Category: 503: shredders
New in: used
Price: request quote
Location: Land-de DE 74909 Meckesheim, Industriestr. 33
Seller: HERBOLD

Infeed: approx. 1800 x 3000 mm Rotor width: approx. 1800 mm Rotor diameter: approx. 600 mm Stator knives: 1x3 Rotor knives: 42 Drive: 132 kW Incl. new PLC control.

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Granulating sieve Grater/shredder (1x), Make Alexanderwerk, Type KM 7 1/4, No 11553, Material aluminium, Sieve sizes dia. 160x80mm, With hopper, Inlet dia. 120mm, Motor 0,92 KW, 220/380 Volt, With extra sieves (5x sieves + 3x rotor), Mounted on mild steel frame, Mounted on wheels, With switch, Floor space 1,0x1,0 M, Total height 1,4 M, Weight 100 KGSIEVE GRANULATORSSIEVES > SIEVE GRANULATORS

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)