shot blast used for sale

Straalinstallatie - 4 turbines, 7,5 kW elk - maximale werkstukbreedte: 600 mm - maximale werkstukhoogte: 400 mm - recuperatie: 5500 m³/h - totaal vermogen: 40 kW - passeersnelheid: 0,5 gt; 3 m/min - Circulatiecapaciteit van het schuurmiddel: 800 kg/min - Gewicht van de machine: 7 ton Benodigde ruimte: 11 meter lang bij 2,4 meter breed (hoogte: 4960 mm)

AFT Single shot depositor Stainless height adjustable frame, 25Kg hopper, fill range 25g - 100g, mobile, 1Ph

Knobel line and a W&D line shot depositor for chocolate. Dosing machine for tempered chocolate with agitator or other liquid as well as slightly viscous products also AWEMA moulding line Hacos chocolate moulding line

Loypack One shot chocolate depositor Stainless one shot moulding machine, 100Kg twin hopper, moulds are loaded into a denester, adjustable temp control, variable speed, heated water tank, comes with over 300 different moulds for making neopolitans, 3Ph

Manufacturer: Musashi Model: ShotMaster 300 SX Type of Machine : Dispensing robot Key features: • Operating speed: 800 mm/s • Positioning accuracy: ±0.01 mm • Synchro Speed function for consistent line width and reduced cycle time Teaching pendant: • Interactive user interface • Stopwatch function • Dispensing condition switching • Data transfer between robots • Language support: Japanese, English, Chinese Hardware configuration: • 26/26 external input/output • USB high-speed communication • Standard buttons: START, STOP, RETURN TO ORIGIN, DISPENSE • Z-axis brake function Find more here - / Contact us at -

Shot Blast Unit (Mould Cleaner for metal parts / car parts) Grit blast 3phase 4ft trolley Lift platform Internal dims: 1.4 long x 1.3m deep x 1.7m high With DCE Dust Extraction Model UMA 152 G5 415 volts 3phase 50 cycles

Qty. 1 Second-hand shot blasting chamber unit Mfc.: Getrasur Blasteco Type: BLASTECO PC-BE 2466 Built: 2007 Stopped: 2022 with complete handling equipment Dimensions: 24.0 x 5.85 x 5.95 m – L x W x H Construction: Modular bolted – steel sheet elements. The frame structure consists of 7 internal frames and 2 edge frames. The edge frames form the gate porticos. Access: Main roller shutter gate (2 pcs.), motorized - electrically driven Gate clearance: 5.0 m x 5.01 m (width x height) Consist of: Control cabinet GETRAFLEX abrasive recovery floor Recirculation machinery Recovery and separation system Lighting (top, side) Automatic gate (x2) Service doors (x2) Cleaner (x2) Dust extraction ventilation

BLASTMAN B20CX shot blasting robot was built in 2024 in Finland by Blastman Robotics Ltd. The machine is in very good technical condition with minor signs of use. The BLASTMAN B20CX is a state-of-the-art system designed to operate in demanding industrial environments. The machine is designed for precision surface cleaning of steel structures, castings, large-sized parts and other workpieces that require high efficiency and repeatability of the process. The shot blasting process is performed by means of steel shot or corundum, ejected under high pressure through two nozzles mounted on a 2750 mm long telescopic boom. This solution enables effective blasting even in hard-to-reach places. The B20CX shot blasting robot is distinguished by its robust gantry design adapted to the dimensions of the blasting chamber. The operator controls the machine from a comfortable, sealed cabin equippe ...

Max. useful capacity [dm3] 170 Max. batch weight [kg] 500 Blast room inside dimensions [mm] : Ø700 x 988 Max. workpiece diagonal [mm] : 350 Max. weight per workpiece [kg] : 23 Number of blast wheels : 1 Power per blast wheel [kW] : 11 Abrasive throughput, max. [kg/min] : 180 Initial abrasive filling [kg] : 180 Air required for dust collection [m3/h] : 1 600 Installed power, approx. [kW] : 12,3 Dimensions, approx. [mm] A : 3 730 x B: 2 070 x C : 1 610 Weight, approx. [kg] : 2 300 Max. carrying capacity of loader [kg] : 500 Power of loader [kW] : 7,5 Weight of loader [kg] : 1 250

Cleaning system, for ceramic flexo and ceramic flexo sleeves. Plastic media or sodium bicarbonate is sprayed at low pressure onto the the cylinder. This media is then recycled continuously about 8 times, depending granulometry. The machine consists of a cleaning and a cyclone/filtration filtration" section. Second-hand machine. Power supply: 230V 50/60Hz 3kW Compressed air: 5 bars Media consumption : 0.5kg/hour Find more here - / Contact us at -

This AGTOS blasting system was manufactured in 2018. Designed as a deburring machine, it efficiently removes burrs from various materials, enhancing surface finish and part accuracy. Ideal for operations requiring precise deburring. Contact us for more information about this machine.

A complete compressor system is available. 1) Screw compressor German Blast 22, year of manufacture: 2011, motor power: 22kW, operating pressure: 10bar, air flow rate: 190m³/h, machine dimensions X/Y/Z: approx. 1100mm/750mm/1450mm, weight: approx. 500kg, operating hours: 27305h, load hours: 10050h. 2) Compressor Rotorcomp, max. operating pressure: 15bar, max. operating temperature: 110°C. 3) Pressure vessel IPL, year of manufacture: 1997, volume: 1000l, max. operating pressure: 10.5bar, max. operating temperature: 50°C. 4) Air dryer German Blast BT-220. 5) Water separator. Documentation available. An on-site inspection is possible.

SciTeex Blastlux blasting room from 2016. A robust, industrial solution for high throughput surface preparation of large and complex workpieces. This used Blastlux delivers consistent results, reliable uptime, and operator-friendly control, making it a smart choice if you are considering a second-hand Blastlux with proven performance. Why it benefits you - High productivity: four shotblasting units work efficiently on large parts for faster cycle times and uniform coverage. - Consistent quality: Magic Blast controllers and precise media flow deliver repeatable surface preparation ready for coating or further processing. - Clean and safe operation: integrated filtration system helps maintain a clean workspace and stable blasting conditions. - Smooth workflow: automatic front door and a dedicated service door support quick loading, maintenance, and safe access. - Operator efficiency: two a ...

Qty. 1 Second-hand Shot-Blasting Line Mfc.: COGEIM – SAS Eng. Built: 2016 Dismantled and in storage Type: 4 Turbines Material to be processed: Bars’ length: min. 6.000 – Max. 12.000 mm Approximate work pieces dimensions and weight: Dimensions: round Ø 30 - 110 mm No. of simultaneously processed bars 7 up to Ø= 60 mm; 4 for bigger diameters

Manufacturer: Rösler Model: RBD 600-2/4 Year of Manufacture: 2007 Technical Data Connection Values / Power Requirements - Supply Voltage: 3 x 400 V - Compressed Air Quality: Cleaned, dried, oil-free, filtered, filter 40 um, residual moisture at 20 C less than 30% - Ambient Temperature / Humidity: +5 C to +40 C, per DIN 40040 G (annual average less than 65%, within 60 days less than 85%) - Blast Media Fill Quantity (kg): approx. 1500 - Required Dust Extraction Capacity (m3/h): 5600 Dimensions / Weights - Length (mm): 12400 - Width (mm): 3800 - Height (mm): 2300 - Weight of Heaviest Single Component (kg): 6000 Find more here - / Contact us at -

Shot blasting machine, continuous blasting machine, wear plates, blast wheel discs -Spare and wear parts: for shot peening system continuous blasting system -Baffle plates: 02122 V105 7 pieces dimensions 390/125/H145 mm / 11.7 kg/piece. -Baffle plates: C1315 N517 2 pieces dimensions 480/140/H175 mm / 15 kg/piece. -Spinning wheel discs: 02122 V105 16 pieces, dimensions 350 x 80 mm / 112.5 kg/total. -Accelerator gears: 4 pcs. Ø 250 x 320 mm / 27 kg/pc. -Conveyor shafts: 3 pieces Ø 80 x 1640 mm / 40 kg/piece -Shipping/Price: complete -Total weight: 452.4 kg

Manufacturer: Rump Model: Strahlanlagen Xedura 1500 Year of Manufacture: 2017 Type of Machine : Wire belt blasting machine Condition: good to very good Maintenance: regularly, once a year Beam hours: 1,849 Total operating hours: 2,146 (approximately 200 hours per year) Operating voltage: 400 V, 50 Hz Control voltage: 24 V DC Rated power: approximately 82 kW Find more here - / Contact us at -

- Belt type shot blasting machine with 2 turbines. - Crib capacity: 1.5 tons. - Especially suitable for small parts. - Includes output belt. - Crib measurements: 270 x 145 x 90 cm. - Includes 500 kg GH jib crane with 250kg capacity hoist, without control. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-48166-23

- Machine designed for automatic shot blasting of castings, stamped parts and other hooked parts. - Maximum load per hoist: 2,000 kg. - Maximum dimensions of the pieces: Ø2,000 x 2,400 mm in height. - First theoretical shot load: 2,000 kg. - Installed power of the machine with STM separator: approx. 40 kW total - Acceptable ambient temperature: from -5 ºC to +40 ºC. - Pneumatic equipment with a operating pressure of 580 kPa. - Compressed air consumption: approx. 3 N m³/h. - Includes shot blast chamber protected with anti-wear material. - It has an overhead conveyor for handling the parts. - Incorporates a vacuum system and dust filter. - It has 4 turbines - The machine is prepared for connection to the vacuum/filter assembly. - The working system allows the rotation and translation movement of the hook for a uniform finish. - Operating conditions of this machine: unche ...

- Equipped with 1 turbine. - Skip feeding system. - Crib capacity: 2 tons. - Dimensions of the cot: 130 x 190 x 110 cm. - Automatic loading and unloading by turning the drum and vibrating screen. - Shot blasting cabin of robust construction, lined with anti-wear steel. - Dynamic separation system for removal of coarse residues and small impurities. - Centrifugal vacuum cleaner included. - Parts introduction system by skipping with double safety: light barrier and mechanical safety. - Model 400 turbine, with 8-blade rotor and shot meter. - 40 hp turbine engine at 1,500 rpm - Shot driven with an approximate impact velocity of 75 to 80 m/s. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in ...

various INDEX tool holders according to the list

Firing piston with guide bush, 1542 x D170 / D115mm, Oleopress, new -50% Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. As good as new in original packaging! The part was bought from a spare parts store of an aluminium die casting company and has never been in operation, is completely as new and in the original packaging. Suitable for the Oleopress aluminium die casting machine OL. Technical data: - Total length 1542 mm - Piston rod D115 mm - Piston bronze D170 mm x 110 mm with 5 new piston rings - Guide bush bronze, AD 145 with 2 O rings, length 118 mm, - flange guide bush AD 185 x 18mm, pitch circle D 165 z=8

Shot piston to die casting machine OL, D225 mm x 510 mm, Oleopress, used - overhauled Special price! If you have a VAT number, we will gladly issue an invoice without VAT. As good as new condition The part was bought from a spare parts store of a company, was overhauled by a specialist company and is in mint condition. - Piston bronze D225 x 190 mm incl. 5 piston rings - Piston rod D 113 mm - Total length 510 mm - Weight 60 kg

Concrete spraying machine Manufacturer Montanbüro Type e.B. Elefantion Unused! Other unused and used concrete spraying machines in stock Also water pumps with e.B. Centrifugal pump Flow rate 150m³ at head 750m! If you are interested, please ask! Other machines: 216 TIG welding machine Dalex TGKW 352 AC/DC 217 Dalex LDE 400 inert gas welder 218 Welding fume extraction Dalex 64111 222 items of rotary/butterfly valves 228 items filter mats for building material plants 229 items Control cabinets 230 3 items submersible pumps 231 2 submersible pumps DV80ABS 233 Centrifugal pump LHK 125x10 SE G150 234 compressed air predatory winches pulling force 10to 235 Concrete spraying machine Aliva 237 Concrete spraying machine Aliva 238 11 centrifugal pumps 240 2 high pressure pumps TP 300/42/48 213KP pneumatic 241 4 lifting/trasn sport beams pneumatic, 2x30/40 kN, witho ...

In pelican case with cables. Auction-ID: A7-48351-290

Condition: new and packaged Auction-ID: A1-48313-411

Machine Type: Vapormatt VaporMate Manufacturer: Vapormatt In contrast to sandblasting, wet blasting, or VaporBlast, is the treatment of a another element added: water. This optimises the surface treatment and makes it easier to even smoother and more uniform surfaces can be achieved. The Vapormate is a highly versatile, manual entry-level system. It is a very popular system for users who need a compact system for smaller rooms or who want to test wet blasting processes before investing in a larger system. The Vapormate is equipped with all the features you would expect from one of our larger manual systems . The process of wet blasting was developed in the 1950s by the company Vapormatt. In over 70 years of further development in wet blasting, an ergonomic as well as an economical investment, the Vapormate. The integrated circulating water supply ensures that consumables  ...

Machine type: Vapormatt PUMA Manufacturer: Vapormatt In contrast to sandblasting, wet blasting, or VaporBlast, adds another element to the treatment: water. This optimizes the surface treatment and allows even smoother and more uniform surfaces to be achieved. The Vapormatt PUMA is a high-quality and versatile manual wet blasting booth from Vapormatt, which invented the wet blasting process in the 1950s. In over 70 years of further development in wet blasting, an ergonomic and economical system has been created, the Vapormatt PUMA. Small series parts can be processed by means of an insertable basket, and a clamping device for rims makes it possible to process them. Even large workpieces, weighing up to 50 kg, can be placed on the robust stainless steel mesh. The integrated circulating water supply ensures that consumables are used sparingly. Further technical information ca ...

material width: max. 700 mm : : max. 1 mm : Cutting capacity structural steel: max. 1 mm Cutting capacity aluminum: max. 1 mm Cutting capacity stainless steel: max. 0,5 mm : : max. 1 mm : max. 1,5 mm weight of the machine ca.: ca. 150 kg dimensions: 1200 x 400 x 1200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MHG pressure blasting machine SMG 100-100 incl Dust Extractor 1703-1,5

1 shot blasting machine for paving stones make DISA type BT 125-188 = - Year of manufacture 2000, Beam hours 229, Operating hours 3605 - Permissible document width 12501 mm, permissible. Passage height 500 mm, flow speed 2-10 m/min (infinitely adjustable via frequency converter), belt conveyor center distance 11.7 m, permissible load of the belt conveyor 1000 kg/lm, extracting air volume approx. 125 m³7min, blast wheel diameter 380 mm, blast wheel speed (infinitely adjustable via frequency converter)1800-2800 ulmin, Abrasive recommended gr. S 280; S330, Steel medium requirement for initial replenishment approx. 300 kg, incl. ventilation system

Brand: Fratelli Pezza Type: Blasting machine Model: Mistral 120 Remaining: Open top 2x rack: 1500 x 250 x 2000 + 2nd rack 1100 x 650 x 1900 Chassis number: 130496 Construction year: 1996 Length mm: 1e 1400 Width mm: 1e 1500 Height mm: 1e 2100 Length mm: 2e 1000 Width mm: 2e 1000 Height mm: 2e 3000 Transport size L x W x H: 1,4 x 1,5 x 2,1 + 1,0 x 1,0 x 2,6 Condition machine : Working disassembled Electric. Connection: 400V 16A Documentation: None

Sandblasting machine, blasting machine, sandblasting cabin, sandblasting device -Manufacturer: Güde, blasting system sandblasting cabin type P1 -Interior: 580/480/H295/350 mm -Air requirement: 150 l/min / pressure 6 bar -Dimensions: 690/480/H490 mm -Total weight: 38 kg

Auction-ID: A1-46854-92

Inv. Num. : 7171 Type: TZB 1-5.5/700 Producer: Kovo Staněk Generated: Parameters: Max. workpiece diameter: 345 mm Maximum filling volume: 165 dm³ Throw wheel force: 7.5 kW Blasting chamber internal dimensions: 720 x 800 mm Maximum load: 350 kg Max. weight of the part: 15 kg

Max diameter of workpiece 1200 mm Max workpiece height 1600 mm Max workpiece weight 1200 kg Number of wheelsxpower 2x 7.5 kw

Auction-ID: A1-48232-167

Auction-ID: A1-48232-166

Auction-ID: A1-47352-98

Professional ICS IC-310-S dry ice blasting machine for industrial cleaning with dry ice. The machine is equipped in a mobile stainless steel housing and equipped with digital control, adjustable working pressure and professional dosing control. The machine comes with a comprehensive accessory kit, including a transport case with blasting gun, multiple blasting nozzles, hoses, power cable and documentation. Dry ice blasting is suitable for cleaning machines, production lines, electrical installations, molds, vehicles and other industrial applications without the use of water or chemical cleaning agents. Technical data Brand: ICS Ice Cleaning Systems / Blasteq Model: IC-310-S Year of construction: 2021 Working pressure: maximum 16 bar Power supply: 230 V / 50 Hz / 5 A Weight: approx. 73 kg Scope of delivery Dry Ice Blasting Machine Blasting gun Various nozzles Transport case Snakes Powe ...

Entrance width 2000 mm Lenght 12.000 mm Number of turbines 6 Turbine output 7.5 kw

A Gutmann blasting system completely overhauled by Rösler in 2019 is available. Documentation available. On-site inspection is possible.

Inv. Num. : 8504 Type: PH 1022/338 Producer: Gutmann Generated: Parameters: The blasting machine is in good condition.

2-sided opening. Including 25 kilos of glass bead

Bh. 560, with hose package

consisting of a mobile dry ice blasting machine with control panel, blasting gun, blasting hoses, air hoses, transport box and an accessory case with various blasting nozzles.