shearing used for sale

Capacity: 0 t Table length: 0 mm Table width: 0 mm Stroke: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Shearing force: 20 / 300 kN Total stroke: 100 / 70 mm Power stroke: 22 / 6 mm Execution: 2 supports Slide diameter: 30 / 63 mm Voltage 50 Hz 3x: 380 Volt Compressed air from: 6 bar Machine´s weight about: 1900 kg Overall dimensions machine: Length: 1300 mm Width: 900 mm Height: 2400 mm Various accessories: Déclanchement à deux mains

Salvagnini S4+P4-2420 Plate Bending and Punching Machine Specifications: Maximum length x width of incoming sheet: 2420 mm Minimum length x width of incoming sheet: 436 x 130 mm Maximum diagonal of incoming sheet: 2220 mm Maximum bending height: 203 mm Maximum material thickness: 2.0 mm Minimum material thickness: 0.5 mm Charging: automatic/manual Load capacity 5000 kg The Salvagnini S4 + P4 system are flexible lines for the production of panels from sheet metal packages. The punching, shearing and bending process is integrated to eliminate material handling. The S4+P4 system can also be operated as separate work cells. The intrinsic flexibility of the individual S4 and P4 systems extends to the hole line. Efficient production: The production process from raw material to finished panel takes place on a single processing line. This offers concrete savings in terms of pro ...

Capacity: 0 t Table length: 0 mm Table width: 0 mm Stroke: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 1400 mm Table width: 250 mm Shearing force: 400 kN Ram feed: 1.8 m/min Total stroke: 150 mm Voltage 50 Hz 3x: 380 Volt Driving motor (motor power): 7.5 kW Machine´s weight about: 1500 kg Overall dimensions machine: Length: 1345 mm Width: 720 mm Height: 2450 mm

Grapes are introduced through the hopper and are progressively brought to the de-stemming speed rate without any impact. The cage and the mixer rotate in the same direction to prevent any shearing effects on the grapes. Capacity: approx. 12 to 20 t/h ( depending on grape-variety, ripeness and nature of grapes) More then 300 machines new and second hand on our seema .de

Working width: 1900mm, with center winder, drive, accumulator, fettling box, fettling & shearing machine Vollenweider, inspection Uster and destacker, the inspection Uster was renewed in 2021.

Shearing capacity: 100 mm Nibbling capacity: 60 mm Punching capacity: 100 t Stroke adjustable:     60mm Punching force:        100T Capacity Ø x thickness:50 x 15 mm Cutting force:         100T Throat:                510mm Capacity L profile:    120 x 13 mm Length:                2.200 mm  Width:                 1.400 mm  Height:                2.200 mm  Weight:                2.000 kg 

Shearing capacity: 4 mm Nibbling capacity: 0 mm Punching capacity: 0 t Make Eckold 46 Type KF 460 Year70 er Walter eckold kraftformer Capacity = 4 mm Speeds 150 - 300 rpm Troth = 460 mm  

round bar steel: 45 mm square edge steel: 40 mm L-beam: 120 x 13 mm flat steel: 500 x 12 mm punching pressure: 60 t throat: 510 mm : 500 x 12 oder 400 x 16 mm punch diameter: 27 in 17 mm punch diameter: 39 in 12 mm oil volume: 80 l total power requirement: 7,5 kW weight of the machine ca.: 2,4 t dimensions of the machine ca.: 1,8 x 0,9 x 1,8 m Hydraulic machine with 5 stations so punching, notching, shearing flat iron, angle iron, solid material, punching with hand lever, profile steel side with foot switch. Punching discharge: 510 mm! All performance data refer to a material strength of 450 N / mm². Electric 380 volt The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pivatic perforating and bendingline Line is manufactured 1999 and it has worked very well for us 20 years. Line is bending line with perforation unit and single press unit 35 tn. In line is separate punching unit so you can perforate material and cut it to separate ballet. Also you can use separate press toll in line. This press unit we have not used, because we other presses. FORSTNER coil cradle Weingarten Decoiler Dimeco Coil feeding line decoiler - straightener feeder Automatic Flexible punching and rollforming line for C and sigma profiles with centralized adjustment”, from Dimeco (Spain), installed/commissioned in 2019 Dimeco Coil feeding line PIVATIC coil punching line FIMI Slit Coil Decoiler and reel winder tunçman Extrusion - Single screw extruder LEMO INTERMAT Thermoforming - Automatic Roll-Fed Machine Uhlmann Blister machine Accela-Cota 170 l Tablet c ...

SCM edge bander model BASIC 1 : - useful thickness of the panel from 8 to 40 mm - feed speed 8 mt/min - overall dimensions approx. 1.7 x 0.7 x h = 1.3 mt Operating groups: - gluing with hot melt glue tank - loader and shearing for roll material - Header kW 0,6 - Trimmers kW 0,5+0,5

Spiral kneader Diosna WV 240 AF with lifting tipper HK 300 Diosna spiral kneader WV 240 AFT with 2 stainless steel boilers and lifting tipper -Spiral kneader system -Diosna Wendelkneter -with 2 stainless steel boilers -for max. 240 kg dough or for max. 150 kg flour -with Diosna tipper Model : HK 300 with clamp locking and boiler drive for boiler shearing

punching and shearing capacity: 380 kN Punches e.g. 30 mm holes in 10 mm steel Shears on the flat steel shears to 300 mm to 12 mm steel Further technical data on request With a range of stamps and dies as desired

Brand: BONFIGLIOLI Model: 1500 Year of manufacture: 2009 Length: 8340mm Width: 2550mm Height 3156 mm Engine: Diesel engine Minimum cutting length: 375 mm Adjustable cutting lengths (mm): 375/580/780/980 General Conditions: Functional Shearing force: approx. 800 tons Operating hours 3000 Machine weight: 56 t., brand: BONFIGLIOLI, model: 1500, Construction year: 2009, length: 8340 mm, width: 2550 mm, engine: diesel engine, Adjustable cutting lengths (mm): 375/580/780/980, Terms and Conditions: work, Weight of the machine: 56t., Brand: BONFIGLIOLI, Weight of the machine: 56t., Terms and Conditions: work, model: 1500, Construction year: 2009, length: 8340 mm, width: 2550 mm, engine: diesel engine, Adjustable cutting lengths (mm): 375/580/780/980, Model: 1500, Year of construction: 2009, Length: 8340 mm, Width: 2550 mm, Engine: Diesel Motor, Adjustable Cutting Lengths (mm): 375/580/780/980, G ...

Max. punching and shearing capacity: 1000 kN Receptacle for hole diameters up to 90 mm Punches 31 mm holes in 25 mm steel Shears on the flat steel shears to 500 mm up to material thickness of 18 mm steel Further technical data on request With an assortment of punches and dies as desired Weight: approx. 3,000 kg

Profile steel shears, profile shears, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shears -Manufacturer: Mubea, profile steel scissors 3-fold combined type Profi 500 -Pressure force: 50 tons -Applications: punching, shearing, cutting, notching -Dimensions: 1240/720/H1350 mm -Weight: 1206 kg

Max. punching and shearing capacity: 500 kN Punches e.g. 20 mm holes in 20 mm steel Shears on the flat steel shears on 350 mm to 13 mm steel Further technical data on request With an assortment of punches and dies as desired

Punching units, punching unit, punching frame, punching tool, non-driven latching and shearing units, forming frame -Handle material: aluminum -Stamping dimension: see photo with dimensions -Quantity: 2 pieces -Price: piece -Dimensions total: 240/145 / H210 mm -Weight total: 22.5 kg / pc.

Notching tool, shearing tool, cutting tool, separating tool, punching tool, punch, punching die, punching punch -Notching tool: pneumatic -Notch: 18 x 9 mm -Dimensions: 180/200/H270 mm -Weight: 4.8 kg

Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Counter bearing: for shear tool -Type: 441215124603 144876 -1x Dimensions: 270/200/H47 mm -Weight: 5.5 kg

Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Counter bearing: for shear tool -Type: 441215124903 -1x Dimensions: 270/200/H47 mm -Weight: 5.5 kg

Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Counter bearing: for shear tool -Type: 441215124903 -1x dimensions: 270/200/H47 mm -Weight: 5.5 kg

Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Counter bearing: for shear tool -Type: 441215124903 -1x dimensions: 270/200/H47 mm -Weight: 5.5 kg

Very good condition sheet metal shear guillotine with little use https://www.baileigh/sheet-metal-shear-sh-5210 This hydraulic shear was one of the machines that got us started and built Baileigh’s quality reputation. With its welded steel frame, the SH-5210 sheet metal shear makes perfect cuts every time. 52” length. 10 gauge mild steel maximum capacity. Minimum capacity of 24 gauge mild steel. 5 hp motor runs on 220-volt single-phase power. Up to 28 strokes per minute. Adjustable 24” backgauge ensures precise repeatability. Front support arms and table guides keep the material square to the blade. 3 modes on the operator console: Inch mode: Jog the control and ease the blade down to the material. Single mode: Make one cut cycle per foot pedal push. Auto mode: Continue cycling as you hold the pedal down. This hydraulic shear comes standard with high ca ...

Woodward Speed Controller 2301 Load Shearing Speed Control 2301 LSSC 9905-020 9907-018 9907-019 and many other Part number available in stock.

FEINTOOL GKP F 100T fine blanking press was manufactured in Switzerland in 1974. The machine, distinguished by its robust, stable design, can perform several demanding machining steps in one precise process, saving time and labour. Workpieces with a maximum thickness of 6 mm thus achieve an extremely even surface and precisely defined edges that are impossible to achieve on other machines. The machining process can be fully automated when the FEINTOOL GKP F 100/160 hydraulic blanking press is retrofitted with a sheet metal feeder. The total weight of the machine is approximately 9 tonnes. Technical data of the FEINTOOL GKP F 100T hydraulic press - maximum workpiece thickness: 6 mm - maximum sheet metal width: 210 mm - total force including auxiliary functions: 160 t - shearing force: 100 t - hydraulic counterweight force (upper table): 1-40 t - hydraulic force of ring jaw (lower ...

Profile steel shears, profile shears, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shears -Manufacturer: Peddinghaus, profile steel scissors 5-way combined model 210 SUPER 11 -Pressure force: 40 tons -Drive power: 3/2.2 kW 2800/1400 rpm -Applications: punching, shearing, cutting, notching -Footswitch: 2 -Length stop: Electric contact stop, adjustable up to approx. 1 m -Accessories: incl. various. Stamps and dies see photos -Dimensions: 1620/1350/H1740 mm -Weight: 1323 kg

Profile steel shears, profile shears, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shears -Manufacturer: Peddinghaus, profile steel scissors 5-fold combined model 210/13 on a rotating machine base -Pressure force: 70 tons -Drive power: 4/5 kW 1450/2900 rpm -Throat: 610 mm -Applications: punching, shearing, cutting, notching -Accessories: incl. various. Stamps and dies see photos -Dimensions: 1865/1205/H1990 mm -Weight: 3580 kg

fully automatic punching shearing machine consisting of MD Automatic bearing with 6 levels Punching unit with shears IA Stripping unit with 2 tables Various spare parts Punching head H2 with 4 rotating stations and 5 embossing stations Box for small parts Output in tons per year 600000 Kg Largest possible format 3000x1500 in sheet thickness 0.75/0.88/1.00/1.25/1.50/2.00 mm steel aluminium up to 3.00 mm Max. punching diameter is unlimited for nipples, fixed tools have a maximum diameter of 60 mm. Stroke per tool is 200 milli seconds. Max weight of work piece is 3000x1500x2 mm steel. Tools are 60 pcs 7 ton stations / 4 pcs 26 ton stations / 4 pcs 12 ton stations 360° rotatable.

Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: Raskin, punching bracket projection 210 mm with punching tool -Punching capacity: 3mm -Matrix: Ø 34 mm -Punching tool: Ø 10 mm -Dimensions: 320/45/H150 mm -Weight: 6.8 kg

Punching units, punching unit, punching bracket, punching tool, non-driven notching and shearing units, forming bracket, for notching machine, sheet metal notching machine, notching shear, corner notching machine, corner shear, corner shear -Manufacturer: Raskin, punching unit type 125 NIA 111.163.0 -Punching capacity: 3mm -Dimensions: see photos -Dimensions: 270/200/H150 mm -Weight: 30.5kg

Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: Raskin, punching bracket type 25 BL 160 -Throw: 110 mm -Punching capacity: 3mm -Matrix: Ø 43 mm -Dimensions: 225/60/H150 mm -Weight: 6.6 kg

Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: SUPRA, punching bracket GN4 type PA80 400 with punching tool -Throat: 400 mm -Punching capacity: mm -Matrix: Ø 75 mm -Dimensions: 570/120/H140 mm -Weight: 27.6 kg

Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: Raskin, punching bracket type 25 BL 260 with punching tool -Throat: 210 mm -Punching capacity: 3mm -Matrix: Ø 42 mm -Punching tool: Ø 18 mm -Dimensions: 330/60/H150 mm -Weight: 9.4 kg

Brand: Akros Henschel, Model: CIC 1100-1400 14L, Technical data:, Shearing force of up to: 1100 t, Cutting width of: 1400 mm, Clamping force of up to: 350 t, Side compression force of up to: 540 t, Installed power of up to: 550kW, Output of up to: 57 tph, Year of construction: 2011, Warranty: none, Excluded: Hydraulic oil Foundations, Electrical connections, Cranes for handling welding equipment, and welders, The machine is disassembled and immediately available., fire: Akros Henschel, model: CIC 1100-1400 14L, Cutting width of: 1400 mm, Output of up to: 57 tph, Year of construction: 2011, Warranty: none, Excluded: Hydraulic oil foundations