We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
122,030 used machines on RESALE, but how to find them? Machine Search
used
A tower shearing plant is available, plant contains (1) Trough goods storage, for material stock approx. 100-150m, max. fabric width: 5000mm (2) Steamer Fleissner, stainless steel, max. fabric width: 5000mm. (3) Main Drive Roller Menschner, cast roller Monforts, year of construction: 1987 (4) Tower Shearing Machine Menschner NTS-T-III, year of construction: 1988, fabric width: 300x5500mm, with three shearing cylinders (5) Control panel for auxiliary drives, deflection, transition bridge, roller fabric storage ETF, year of construction: 1988, storage capacity: approx. 80 running meters, with two center controls Erhardt+Leimer.
used
This LVD HST-C 40/6 Shearing machine was manufactured in the year 2000 in Belgium. It is equipped with a Elgo P8511 control unit and has 2 axis. The machine has a Shearing Force of 206 mm.
used
Profile steel knife, shearing tool, cutting tool, separating tool, punching tool, punch, punch die, punch punch -Shearing tool for T-steel: 120 x 70 mm -Square: 25 mm -Round: 27mm -Type: 50305 -Dimension respectively: 175/140/15 mm -Weight: 5kg
used
1 VOLLENWEIDER cleaning and shearing machine type SUPER DUPLO, width 210 cm
used
This HACO HSL 3013 Shearing machine was manufactured in the year 2007 in Belgium. It is equipped with a HACO SP8 control unit. The machine has a cutting thickness of 13mm
used
This Baykal HNC 8116 Shearing machine was manufactured in the year 2014 in Turkiye. It is equipped with a CYBELEC DNC 60 control unit.
used
This Bernardo HST-3200X6 Shearing machine was manufactured in the year 2017 in Austria. The machine has a punching force of 600 kN.
used
This Jelšingrad MVCS 3100/13 Shearing machine was manufactured in the year 1986 in Bosnia and Herzegovina. The machine has a Cutting thickness of 13 mm.
used
This Haco TS 3012 Shearing machine was manufactured in the year 2004 in Belgium. It is equipped with HACO SP 8 control unit. The machine has a max cutting length of 3000 mm.
used
This JORDI CH 6100 -10 Shearing machine was manufactured in the year 2001 in Spain. Contact us anytime for further questions.
used
IRON WORKER (Universal Punching Shear) (Punching capacity) Punching capacity 70 Tons Diameter 28 x 20mm Thickness (Diameter 28 x 20mm thickness) Max cutting thickness in plate 20mm (Max cutting thickness in plate 20mm) Angle cutting up to 130x130x130x13 at 90°. Angle cutting up to 70x70x7 at 45°.
used
Description: SPECIFICATIONS Brand: Peddinghaus Type: 210 Super 13 Machine dimensions: (L×W×H) 1800 x 1000 x 2100 mm Capacity: 65 T incl. various punches weight approx.: 5,000 kg, Approx. Onsite Dimension. (l x w x h): 1,800 x 1,000 x 2,100 mm
used
Max. Coil weight: 25t, max. Coil outer diameter: 2500mm, Coil inner diameter: 506-610mm, Finished sheet width: 50-159mm, Strip thickness: 0.6-3mm, with double cone decoiler, threading assembly, straightener (straightener was taken over from an earlier line, Schnutz factory, year of manufacture late 80s - early 90s), loop bridge, strip feed unit, cut-to-length shear, conveyor belt, brush table with gripper, slitting shear (guillotine shear), conveyor belts, stacking unit and gantry gripper with two stacking stations, on-site inspection is possible.
used
Shearing Machine ROMEC C20-4 Cutting Length 2050 mm Thichness 4 mm . used machine in good working condition
used
GEKA hydraulic punching and shearing machine Model HYDRACROP 80 SD Characteristics Punching power ton 80 Extra gooseneck (SD) mm 500 Punching capacity steel 42 kg/mm² mm à 40 x 14 - à 24 x 24 Shearing capacity flat iron mm 450 x 15 - 300 x 20 Shearing capacity L mm 130 Shearing capacity U and I (special blades) mm 140 Shearing capacity round mm 45 Shearing capacity square mm 45 Notching capacity mm 90 x 42 x 12 Adjustable stroke for shearing and punching stations mm 0 to 70
new
: neu : ca. 8 Wochen ab Auftragse : Spanien : 170 to : 40x40x4 mm : 65x65x7 mm : 2 : 25/5 bzw- 18/7 mm : 350 to : 5 kW : 265 bar : 70 l Automatic line for punching and sharing angle STANDARD EQUIPMENT: INFEED/OUTFEED CONVEYERS idle rollers 3 conveyers each 3,3 m for feeding angles up to 12 m length WORKING UNITS: ROLLER FEED MEASURING SYSTEM feed by roller wheel (brushless moto),rotary encoder no time loss for measuring feeding speed variablefrom 0 to 36 m/min positioning accuracy in X axis0,25 mm + 0,15 mm per meter the last 250 mm can not be used PUNCHING UNIT (2X) 1 punching unit per leg 1 punch per punching unit adjustable back mark by tooling fromfrom 20-40 mm hydraulic downholder direct access for quick change ofpunches and dies SHEARING UNIT shearing power 350 kN single cut direct access for quick change ofshearing blade hydraulic downholder CNC CONTROL OMRON PLC colour touchscree ...
new
: neu : ca. 10 Wochen ab Auftrags : Spanien : 26700 € : 6000 mm : 40 mm : 6000 mm : 600 kg : 180 mm : 0,2 mm : 0,1 mm The ALRS 600 is a CNC controlled flat bar feeding and shearing system to be mounted on GEKA Hydracrop 80 and Hydracrop 110 dual cylinder ironworkers. This system is ideally designed for shearing desired lengths and quantities of flat bars up to 600x15 mm and 6 m length. THE ASSEMBLY CONSISTS OF: Drive roller with hydraulically controlled pinch roller. Servo motor with linear encoder. B&,R Power Control 500 10”user friendly touch screen control mounted in a control cabinet. Positive hydraulic clamping. Fix guide rollers. Manually adjustable straight guide rollers. 6m roller bed conveyor. Electric cabinet THE WORK PROCESS IS AS FOLLOWS: Place the flat bar on the rollers Adjust the lateral rollers to the width of the flat bar Clamp the material with the h ...
new
sheet width: 1550 mm plate thickness: 3 mm total power requirement: 3 kW weight of the machine ca.: 1600 kg dimensions of the machine ca.: 2.060 x 1.140 x 1.210 mm Producer: OSTAS Type: RGM 1050 x 3 YOM: new Max. Shearing Length: 1.050 mm Shearing Capacity: 3 mm Shearing Angle: 2°30 Strokes Per Minute: 35 d/d Motor Power: 3 kW Table Width: 510 mm Table Height: 820 mm Rear Gauge Distance: 500 mm Dimensions of the machine (LxWxH): 1.640 x 2.060 x 1.210 mm Weight: ca. 1.100 kg Additional information: • Manual backgauge with 500 mm stroke • Squaring arm with T-slot, stopper and ruler • Foot pedal • Front sheet holding arms • Cutting line lighting • Protection Cages optional: • Cutting unit counter • Motorised backgauge with 500 mm stroke • Backgauge with NC control • Pneumatic Sheet Support System • Optical security bar • 0-180° angle cutting The data for thi ...
used
FEINTOOL GKP F 160 hydraulic press was built in Switzerland. The automatic fine blanking press combines several workpiece machining stages into one precise process and significantly saves time and effort. As a result of fine blanking, parts with a maximum thickness of 6 mm obtain a characteristic even surface and accurately defined edges that cannot be achieved with other machines. The FEINTOOL GKP-F hydraulic punching press features a robust, stable construction and a total force of 160 tonnes. Offered with the machine a sheet metal feeder with a maximum thickness of 6 mm and a width of 210 mm allows for completely automatic machining. The automatic punching press underwent extensive modernisation in 1999. The total weight of the GKP-F 160 press is 9000 kg. Technical data of the FEINTOOL GKP F 160 fine blanking press - maximum sheet metal thickness: 6 mm - maximum sheet metal wi ...
used
Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Shearing tool for square steel: 25/40/50 mm -Shearing tool for round steel: 25/40/55 mm -Type: 4412151064 -Type: 4412151063 -1x dimensions: 220/206/H30 mm -1x dimensions: 215/205/H30 mm -Weight: 16 kg
used
fire: IDROMEC, Model:T506SLK, Status:Used, repainted and in excellent conditions, approx. 6,900 working hours, Year of construction: 2018, Shearing force:500 tons., Hold down force: 70 tons., Pushing force:145 tons., Box length:6 meters, Box liners in wear-resistant steel Hardox 400, N.3 cylinders for each compacting wing, shear throat: 800x650mm, Open box width: 2260mm, power unit: Diesel Engine Cummins 190 HP, Piston pumps: main pump by Rexroth/Parker, Control unit:PLC controlled via 8`touch screen, Programmable / semi-automatic / manual cutting and baling cycles, Small emergency portable control board. Cable length 5 meters, Modem for remote assistance + IRC APP for baler-shear monitoring, Remote controlAUTEC, Automatic greasing: for shearing head and hold down., Supporting legs:N.4 over sized hydraulic supporting legs/feet, Total weight: approx. 52 t., Warranty: none, Others:complete ...
used
GEKA BENDICROP 60 SD ironworker machine was manufactured in 2016 in Spain. Equipped with 5 work stations, the ironworker machine performs precise hole punching, corner cutting, flat bar cutting, as well as bar cutting and bending. The vertical movement of the shears is performed by two adjustable hydraulic cylinders with a central positioned actuator, which guarantees excellent cutting quality throughout the entire life of the machine. The GEKA ironworker machine weights 1750 kg. Technical specifications of the GEKA BENDICROP 60 SD hydraulic ironworker machine General data - maximum press force: 60 t - number of cylinder strokes: 32/min - dimensions (L x W x H): 2010 x 1400 x 2006 mm - weight of machine BENDICROP 60 SD: 1750 kg Hole punching station - maximum bore size (diameter x thickness): ø 40 x 11 mm - throat depth: 500 mm - additional table for hole punching fi 100 ...
used
Punching force: 550 kN (punches e.g. 30 m in 16 mm material), with search device via foot switch for graining Projection: 550 mm Cuts 350 x 13 mm or 230 mm on the flat steel shears Two separate foot switches for the punching and shearing sides, so that punching and shearing can be carried out independently Assortment of tools is included in the price
used
Punching force: 550 kN (punches e.g. 30 m in 16 mm material), with search device via foot switch for graining Cuts 350 x 13 mm or 230 mm on the flat steel shears Projection: 305 mm Two separate foot switches for the punching and shearing side, so that punching and shearing can be carried out independently Support table on the punching side Assortment of tools is included in the price
used
Used fully automatic copper / nickel cathodes (max. 1200x1200x25 mm) longitudinal and transverse cutting line, incl. vacuum feeding unit, plate feeding device, scissors 1 for shearing strips, pulling device, transport and lifting device, shear 2 for shearing on squares, apron conveyor for part ejection. Scissors each with hold-down device
used
Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Shearing tool for channel steel: 50 mm -Type: 440065124502 -Type: 440065124501 -1x dimensions: 136/130/H25 mm -1x dimensions: 128/132/H25 mm -Weight: 6 kg
used
Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Shearing tool for channel steel: 50 mm -1x dimensions: 140/140/H30 mm -1x dimensions: 135/135/H30 mm -Weight: 8 kg
used
Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Shearing tool for channel steel: 120 mm -Type: 441215124901 -Type: 441215124902 -1x dimensions: 215/205/H30 mm -1x dimensions: 210/220/H30 mm -Weight: 19 kg
used
Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Shearing tool for U-steel: 65/80 mm -Type: 441215124701 -Type: 441215124702 -1x dimensions: 215/205/H30 mm -1x dimensions: 210/220/H30 mm -Weight: 19 kg
used
Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Shearing tool for U-steel: 80 mm -Type: 441215124701 -Type: 441215124702 -1x dimensions: 215/205/H30 mm -1x dimensions: 210/220/H30 mm -Weight: 19 kg
used
Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -only one tool available (counter tool missing) -Shearing tool for channel steel: 30 mm, 60 mm -Type: 441216084902 -1x dimensions: 210/220/H30 mm -Weight: 9.9 kg
used
Brand: BONFIGLIOLI, Model: 2000, Length: 8625 mm, Width: 2550mm, Height 3260mm, Engine: Diesel engine, REMOTE CONTROL: yes, Minimum Cut Length: 450mm, General conditions: working, Shearing force: about 800 tons, Year of manufacture: 2019, Operating hours: 3000 h, Weight of machine: 69 t., Immediately available., fire: BONFIGLIOLI, model: 2000, Length: 8625 mm, Width: 2550 mm, Engine: Perkins diesel engine, REMOTE CONTROL: yes, Minimum cut length: 450 mm, General conditions: working, shearing force: about 800 tons, Year of manufacture: 2019, Operating hours: 3000 h, Weight of machine: 69 t.
used
Punching force: 1000 kN (punches e.g. 40 mm in 22 mm material), with search device via foot switch for punching Projection: 340 mm Cuts 400 x 20 mm or 500 x 15 mm on flat steel shears Support table with stop on the punching side Two separate foot switches for the punching and shearing side, so that independent punching and shearing can be carried out Assortment of tools is included in the price
used
fire: IDROMEC, Model: T1000x8000LS, Status: Used, non-refurbished, approx. 2,800 working hours, Year of construction: 2008, Shearing force: 1000 ton, Hold down force: 140 ton, Box length: 8 meters., shear throat: 900x700mm, Open box width: 3280mm, power unit: Electro 310 kW, Piston pumps: main pump by Rexroth, Control cabin yes, Remote control AUTEC, PLC: Semi-automatic cutting and baling cycle, Supporting legs: N.4 oversized hydraulic supporting legs/feet, Total weight: approx. 75 ton, Warranty: none, fire: IDROMEC, model: T1000x8000LS, Year of construction: 2008, shearing force: 1000 ton, Hold down force: 140 tons, box length: 8 meters., shear throat: 900x700mm, Open box width: 3280 mm, power unit: Electro 310 kW, Piston pumps: main pump by Rexroth, Total weight: approx. 75 ton, Warranty: none
used
Max shearing power: 500 ton Max speed: 40/1 min Stroke: 100 mm Single stroke: 25/1 min Square: 125 mm Max round: 132 mm Length of blades: 420 mm Main motor power: 45 kW Height above floor: 3500 mm Weight: 23 ton
used
Max shearing power: 315 ton Stroke: 70 mm Single stroke: 30/1 min Square: 100 mm Max billet cut : 106 mm Main motor power: 20 kW Weight: 14 ton
used
Grinding diameter: 0 mm Grinding length: 0 mm Workpiece weight: 0 kg CNC Brand: 0 CNC Model: 0 Technical data Centre height: 100 mm Distance between centres: 680 mm Max. Longitudinal travel: 620 mm Max. transversal travel: 45 mm Grinding wheel: Diameter: 500 mm Width: 80 mm Bore: 203.2 mm grinding wheel width: 80 mm Grinding wheel speeds: number (steps): 3 from: 1150 rpm up to: 1550 rpm Angular displacement: 3 ° Work piece spindle head: speeds: stepless from: 65 rpm up to: 500 rpm rotatable: 360 ° Spindle taper:: 4 MT Taper in tailstock:: 3 MT Spindle stroke: 20 mm Shearing force: 4 - 15 kp Table angular displacement: 9 ° Table speed: stepless up to: 5 m/min Voltage 50 Hz 3x: 380 Volt External Grinding wheel motor: 5.5 kW Workhead spindle motor: 0.7 HP Total power required: 10 HP Machine´s weight about: 2900 kg Overall dimensions machine: Length: 2300 mm Width: 1800 mm Height: ...
new
McIntyre 150 Shear Designed as a low-cost answer to metal cleaning, an ordinary 13amp socket and suitable bench are all you need to put the 150 shear through its paces Versatile The McIntyre 150 Shear is ideal for all lighter metal shearing, but is powerful enough to tackle gun metal valves, bath taps, cable and other non-ferrous cleaning operations. The McIntyre 150 Shear is small enough to be moved easily around the yard and will be a versatile addition to any size of yard. Our company can provide it with short delivery time.
Qty. 1 Second-hand continuous galvanising line Mfc.: POSCO Built: 1997 Capacity: approx. 100 000 per annum Strip width: 720 – 1250 mm Thickness: 0.2 – 1.6 mm De-Coiler ID 508 mm OD 2000 mm Weight: 20 Tons Finished product: Coil Strip width: 720-1250 mm Thickness: 0.2-1.6 mm ID 508 mm OD 1600 mm Weight: 10 Tons Sheet Strip width: 720-1250 mm Thickness: 0.2-1.6 mm Weight: 3 Tons Line speed Entry section: max. 150 m/min. Process section: max. 120 m/min. Exit section: Coiling max. 150 m/min. Shearing max. 100 m/min. Threading speed: 20 m/min. Coating method Both sides coating, Regular spangle Coating weight 120-500 g/m² based on both sides Post treatment Chromating Electricity High voltage 10 kV Low voltage 380 V AC, 3 ph., 50 Hz, 220 V AC, 1 ph. Water Pressure min. 3 kg/cm² Steam Pressure min. 5 kg/cm² Temperature min. 158 °C Production process Coil s ...
new
McIntyre 2035 Metals Baler An affordable metal baler, powerful enough to match the performance of much larger machines Strong, powerful, versatile Don't be deceived by the size of the McIntyre 2035 metal baler. A lid shear force of up to 22 tonnes and a platen force of up to 45 tonnes ensure that this machine has enough power to bale a whole range of non-ferrous metals. Heavy duty, four sided, reversible lid shearing blades make light work of oversized materials and in little more that 30 seconds, the 2035 will produce baled material to the size of 14" x 8" (355mm x 200mm)
new
We supply round and flange ring shears (circular shears) in two sizes - 3/1300 and 5/1800 Our KS circular shears are PLC - controlled hydraulic - electromechanical machines designed for the production of rounds and flanges made of steel sheet, VA stainless steel sheet, Aluminium and non-ferrous metal sheet, maximum shearing performance for sheets with a tensile strength of 400 N/mm2 - 0.5 mm to 3 mm or 0.5 mm to 5 mm, smallest / largest cutable circular board 150 mm / 1,300 mm or 1,800 mm respectively – cutting speed up to 35 m/min, drive power 5 kW or 7.5 kW, weight approx. 2,000 kg and 3,000 kg
used
Key data: 40
Shearing capacity: 40 mm Nibbling capacity: 0 mm Punching capacity: 0 t Make: GEKA Type: Hydracrop 80 SD YOP: 2010 Large package tooling 5 Working stations 2 Foot switches Stroke adjustable: 70mm Punching force: 80T Capacity Ø x thickness:40 x 20 mm Cutting force: 150T Throat: 500mm Capacity L profile: 130 x 130 x 13 mm Power: 9kW Length: 2.200 mm Width: 1.200 mm Height: 2.200 mm Weight: 2.800 kg
used
Grinding diameter: 0 mm Grinding length: 0 mm Workpiece weight: 0 kg CNC Brand: 0 CNC Model: 0 Technical data Centre height: 180 mm Distance between centres: 650 mm Max. work piece diameter: 360 mm Grinding weehl left side: Diameter: 400 mm Width: 100 mm Bore: 127 mm Grinding wheel right side: Diameter: 250 mm Width: 32 mm Bore: 76.2 mm Workpiece weight on centres max.: 2500 kg Grinding spindle head: Peripheral speed: 35 m/s Work piece spindle head: stepless from: 30 rpm up to: 450 rpm Swivelling range: 0 - 90 ° Taper in tailstock:: 4 MT Spindle stroke: 45 mm Spindle diameter: 50 mm Shearing force: 0.1 - 0.8 kN Table angular displacement: 12.5 ° Table speed: stepless from: 0 m/min up to: 4 m/min Voltage 50 Hz 3x: 380 Volt Air connect: 4 bar External Grinding wheel motor: 5.5 kW Workpiece spindle motor: 0.55 kW Total power required: 10 kW Overall dimensions machine: Length: 3600 m ...
used
Technical data Shearing force: 20 - 55 kN Dimensions: Length: 540 mm Width: 175 mm Height: 125 mm Vice: width: 175 mm
used
A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Nobilta NOB 300. The Nobilta is the New - Generation of Powder Processor designed to perform fast powder mixing of Macro to Micro precision mixing, creating and treating composite materials such as surface-modification and sphericalizing particles in accordance with specific design conditions in one processor. The Nobilta is structured with a horizontally positioned c ...
Section Cutting - round bar: 50 mm - square bar: 50 mm - C amp; I profiles: up to 160 mm Notching - rectangular: 52 mm - material thickness: 13 mm Punching - 33 x 20 mm - 30 x 20 mm - 55 x 12 mm - 38 x 15 mm - bending cap: 250 x 20/10 mm Shearing Flatbar - 380 x 20 mm - 480 x 15 mm - angletrim: 120 x 15 mm Angle Cutting - at 90°: 150 x 15 mm - at 45°: 80 x 10 mm Punching pressure: 85 ton Max sheet thickness by punching + nibbling: 33 x 20 mm Max punching dia: 55 x 12 mm Length: 1830 mm Depth: 790 mm Height: 1920 mm Weight: 2620 kg
used
Copy and coordinate nibbling machine make TRUMPF type CN 701Machine -No: 1118Technical specifications:Horizontal projection: 1550 mmWorking area: 1250 x 1300 mm: 1250 x 2000 mmSmallest section of a circle for copy nibbling: 12 mmsmallest circular diameter with internal circular guidewhen shearing: 56 mmsmallest circular diameter with internal circular guidewhen nibbling: 65 mmstepless stroke rates: 350-1400 H / minWorking height: 1020 mmDrive power: 2.2 kWExternal dimensions approx .: 2900 x 950 x 2130 mmWeight approx: 2125 kgWith- lots of accessoriesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Diosna Spiral Kneader Type: SP 240 E with soil emptying automatic dough emptying Stainless steel boiler and spiral 2 timers with flour dust cover New belts on the conveyor belt for 150 kg flour or 240 kg dough with boiler shearing repainted
used
Pivatic perforating and bendingline Line is manufactured 1999 and it has worked very well for us 20 years. Line is bending line with perforation unit and single press unit 35 tn. In line is separate punching unit so you can perforate material and cut it to separate ballet. Also you can use separate press toll in line. This press unit we have not used, because we other presses. FORSTNER coil cradle Weingarten Decoiler Dimeco Coil feeding line decoiler - straightener feeder Automatic Flexible punching and rollforming line for C and sigma profiles with centralized adjustment”, from Dimeco (Spain), installed/commissioned in 2019 Dimeco Coil feeding line PIVATIC coil punching line FIMI Slit Coil Decoiler and reel winder tunçman Extrusion - Single screw extruder LEMO INTERMAT Thermoforming - Automatic Roll-Fed Machine Uhlmann Blister machine Accela-Cota 170 l Tablet c ...
used
Capacity: 0 t Table length: 0 mm Table width: 0 mm Stroke: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Shearing force: 20 / 300 kN Total stroke: 100 / 70 mm Power stroke: 22 / 6 mm Execution: 2 supports Slide diameter: 30 / 63 mm Voltage 50 Hz 3x: 380 Volt Compressed air from: 6 bar Machine´s weight about: 1900 kg Overall dimensions machine: Length: 1300 mm Width: 900 mm Height: 2400 mm Various accessories: Déclanchement à deux mains