shear used for sale

Alligator shear ideal for processing weapons Fully Guarded As New 660mm blade length

Scrap shear dentition attachment for an excavator used MBI ZHEJIANG MANTOVANI MANTOVANIBENNE Type MS22-MC Year: 2020 suitable for multipunch MS22R Overall dimensions: 1100 x 1100 x 500 mm Changes and errors in the technical data, information and prices as well as prior sale reserved

Scrap shear dentition attachment for an excavator unused MBI ZHEJIANG MANTOVANI MANTOVANIBENNE Type MS15-MC Year: 2020 Overall dimensions: 1100 x 1000 x 500 mm Changes and errors in the technical data, information and prices as well as prior sale reserved

-Power: 18.5 kW; -Crank stroke: 140 mm; -Shear force: 60 t;

4-fold combined profile steel shears PEDDINGHAUS type Peddy Masch. No. GJ 4405 Year of construction 1970 Notching device: rectangular notch 40 x 40 to 7 mm sheet steel Punch dimension 40 x 50 mm - stroke rate 40 strokes/min. - Table support 750 x 260 mm Profile steel shears: Profile shears at 90 angles 70 x 70 x 7 mm Profile shears at 45 angles 50 x 50 x 6 mm Bar steel shears:Cutting capacity round 28 mm Cutting capacity square 25 x 25 mm Flat steel shears: Cutting capacity max. 10 mm cutting capacity flat 80 x 6 mm- blade length 175 mm- usable length 135 mm - shear angle approx. 2 motor power 1.5 kW mains connection 380 volts, 50 Hz. - mechanical stroke tripping - bogie with material support Space requirement L x W x H 1200 x 750 x 1700 mm Weight 500 kg good condition; used

Sheet thickness: 2,00 mm Sheet diameter: 2 mm Knife diameter: 0 mm BMS - KSA 1500 x 2.0 Decoiler for coils up to 1500 mm Straightner with 9 rolls adjustaable to 0.2 -  2 mm Slitting roll with 3 knive blades Cutting plate shear up to 2 mm Positioning & Feed & Speed controller Maximum sheet thickness:2mm Length:                4500mm Width:                 2000mm Height:                1600mm Weight:                4000kg

Hydraulic guillotine shear Make: JWELL, engine: 5.5 Kw (7.5 hp), year 2020. For sheet metal cutting. Blade width: 2.2 m.

Hydraulic guillotine shear: 1.870x1.070 mm, brand: Gester, model: TN-100, engine: 30 hp, 100 TN force.

Type: APE 250. Band saw blade pneumatic strip shears. Strip width up to: 250 [mm]. For straight rectangular and burr-free cutting off the bandsaw blades. Pneumatically operated for double cutting (two shear knives). Year of manufacture: 2016. On stock more Ideal BAS flash butt welding machines and automatic punching presses Bruderer, Mabu, Schaal, Bihler and more.

Our company provide a Lefort C850T machine with complet refurbishment. The machine is a full extra machine has the following extras: -Full Tunner pusher -Window crosshead -Soft started -Oil Heater -Pre-feeder -Central Greasing system For our refurbishment we provide warranty, and man power for the assembling and commisioning. The Estimated delivery time will be end of May. In case of need, we can provide platform and cabin for the customer. Technical details: Cutting force:850T Hold down force:200T Pusher force: 120T Open Box Section: 8000x2400x1000 mm Closed Box Section:8000x1000x700 mm Lid cylinders: 4x175T Power Source: 2X182Kw Electric engine Own Weight:150T And what we done on the machine? Just a few examples: -Complet refurbishment of the shear head -At the box we changed: -- Wear plates in 4 sides -- Hinges -- 4 New lid cylinder completly -Complet Refurbishment of all pumps -Recon ...

Sheet thickness: 16,00 mm Sheet width: 3060 mm Depth rear gauge: 1000 mm Hydraulic swing beam shear Cutting thickness 450 N/mm2 16 mm Cutting thickness 700 N/mm2 10 mm Oil capacity 220 Liter Rapid blade gap adjustment  Sheet support arms front side  CE-Mark Maximum sheet thickness:    16mm Max. cutting length:        3060mm Strokes on full length:     8mm Strokes in short 1000 length:16 Cutting angle:              2.7° Length backgauge:           1000mm Number of down holders:     17 Power:                      30kW Length:                     4000mm Width:                  ...

Hydraulic shear (guillotine) 80 TN force. Measures cut width: 1.400 mm, height: 1.500 mm, motor: 60 hp. With electrical panel.

Hydraulic shear (guillotine) Brand: La Metalurgica, measures wide cut: 650 mm, height: 580 mm, motor: 4 Kw (5.5 hp).

Rotor shears with feed hopper and base frame Demonstration machine with only 10 operating hours 2 x 15 kW Cutting unit 600 x 850 mm Rotor shear with hopper and feet demo machine with only 10 working hours 2 x 15kW Cutting chamber 600 x 850 mm

Hydraulic guillotine shears - ordering machine (delivery time approx. 10-14 weeks) - incl. foot switch, touchscreen, rear installation room with light barrier monitoring, cutting gap automatic/electric, cutting angle automatic/electric, hydraulic hold-down, mot. Backgauge up to 1000 mm depth -Illustrations similar- Hydraulic plate shear - order machine (delivery time approx. 10-14 weeks) - incl. foot switch, touchscreen, rear set-up area with light barrier monitoring, automatic/electrical cutting gap, automatic/electrical cutting angle, hydraulic hold-down, mot. backgauge up to 1000 mm -images similar-

Hydraulic guillotine shears - ordering machine (delivery time approx. 10-14 weeks) - incl. foot switch, touchscreen, rear installation room with light barrier monitoring, cutting gap automatic/electric, cutting angle automatic/electric, hydraulic hold-down, mot. Backgauge up to 1000 mm depth -Illustrations similar- Hydraulic plate shear - order machine (delivery time approx. 10-14 weeks) - incl. foot switch, touchscreen, rear set-up area with light barrier monitoring, automatic/electrical cutting gap, automatic/electrical cutting angle, hydraulic hold-down, mot. backgauge up to 1000 mm -images similar-

Key data: 2500 mm, 6 mm, 1000 mm

Max. cutting length: 2500 mm Max. sheet thickness: 6.35 mm steel Controlled backgauge up to 1000 mm Side stop and table extensions Shear angle adjustment Cutting gap adjustment Cutting length limitation Cut edge illumination Knife sharpened Weight: approx. 4200 kg

Hydraulic guillotine shears FASTI type 509 - TCHE 12/4 Masch. No. 4590 Year of construction 1986 Cutting length 1255 mm Cutting thickness at 400 N/mm² 4 mm Cutting thickness at 750 N/mm² 2.5 mm Back gauge 1000 mm controlled Shear angle 1.5 Hydraulic pressure max. 270 bar Motor power 7.5 kW Mains connection 400 volts, 50 Hz Back gauge with positioning control ELGO ELECTRIC Type 85 - manual cutting gap adjustment with dial gauge display on the right and left- infinitely variable cutting length adjustment - front angle stop left 1250 mm- 7 pieces hydraulic sheet metal hold-downs - electric foot switch - very solid and torsion-resistant welded construction - operating instructions with electrical plan, hydraulic plan space requirements L x W x H 1900 x 2200 x 1660 mm Weight 2600 kg good condition; used

Bellaform Shear Roll Mixer BSW `2022 Almose new machine

Shear beam load cell -Nominal load: 500 kg -Nominal value tolerance: %+/- 0.1 -Stainless steel: 1.4548 -Protection class: IP 68 -calibratable -Dimensions: 32/32/130 mm -Net weight: 0.98 kg

Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Counter bearing: for shear tool -Type: 441215124603 144876 -1x Dimensions: 270/200/H47 mm -Weight: 5.5 kg

Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Counter bearing: for shear tool -Type: 441215124903 -1x Dimensions: 270/200/H47 mm -Weight: 5.5 kg

Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Counter bearing: for shear tool -Type: 441215124903 -1x dimensions: 270/200/H47 mm -Weight: 5.5 kg

Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Counter bearing: for shear tool -Type: 441215124903 -1x dimensions: 270/200/H47 mm -Weight: 5.5 kg

Replacement knife for table shears, replacement blades, cutting knives, shear knives -Number: 2x knives available -Angle honed: 90° -Dimensions: 20 x 80 mm -Lengths: 2x 2397 mm -Hole spacing from: 73/125/200/200/200/200/200/200/200/200/200/200/200/125/73 mm -Threaded hole -Price: complete -Weight: 56 kg

Replacement knife for table shears, replacement blades, cutting knives, shear knives -Dimensions: 79 x 19 mm -Lengths: 2x 1055 mm -Hole spacing: 50/238 mm -Bore: 17 mm countersunk -Price: complete -Weight: 24 kg

Hydraulic shear BOMBLED GTS II 3012 Capacity: 3050 x 12 mm Maxi travel: 210 mm Back gear gauge travel: 1000 mm - Back gear gauge ELGO Year of construction: 1993 Throat depth: 110 mm Motor: 13 kW Voltage: 380 V Length: 3700 mm Depth with support: 2500 mm / without support: 2000 mm Total height: 1900 mm Weight: 9,5 T

Key data: 1050 mm, 3 mm, 1000 mm

Max. cutting length: 1050 mm Max. sheet thickness: 3 mm steel Motorized backgauge up to 1000 mm with fine adjustment via handwheel Shear angle adjustment Knife sharpened Operating instructions Weight: approx. 1400 kg

VMI 3500L mixing vessel 2001, Stainless, 3500L jacketed mixing vessel, top mounted agitation and scrape surface, central high shear mixing shaft, with centrifugal pump, 3Ph

VMI 1776L mixing vessel 1992, Stainless, 1776L jacketed mixing vessel, 4.4Bar, top mounted agitation and scrape surface, bottom mounted high shear mixer, with Inoxpa centrifugal pump, 3Ph

VMI 2936L mixing vessel 2001, Stainless, 2936L jacketed mixing vessel, top mounted agitation and scrape surface, central high shear mixing shaft, with Inoxpa centrifugal pump, 3Ph

Tin shear attachment for drill, sheet metal nibble NAREX NP2 sheet thickness: max. 2 mm necessary drill collar: Ø 42 mm drive width: 17 mm New ! Dimensions: 200 x 200 x 80 mm

J. PERROT CSE 3006 shear in working condition for sale. The machine has been revised, the blades cut across the entire width according to the manufacturers data. Concerning the cutting length, the front stop is retracted. Possibility of adjustment to 1/10 mm along the length using the rear stops. Possibility to come and test it

Colgar guillotine shear - Year of construction 1975 in perfect working order complete with n. 2 pairs of Busch blades, n. 2 Front extensions, n. 1 front team, n. 1 row on the pallet. Complete cutting wire lighting. Table with rollers for support and unloading. Rear register mm. 750 motorized with shot counter. Electrical system. Lubrication system. Electric current operation V. 380/50 Hz. Maximum sheet cutting capacity mm. 4/5. Machine made up to standard.

Hydraulic guillotine shear Manufacturer: Ermaksan -wear resistant blades upper knife: two sides; lower knife: four sides - Control unit: CYBTOUCH 6 - 1.000mm rear guide with drive, precision 0.1mm - 1.000mm side ruler and front supports - metric scales - ball screws on the front supports to facilitate the positioning of the sheets - CE approved front, back and side protection plates -light curtains on the back (labor protection) Delivery time: about 4 weeks -Sheet guide system -Automatic hydraulic adjustment of the cutting distance - Silent high pressure pump - Holding springs -adjustable pedal - emergency stop button - shadow line - retractable finger guard - CE certified regulation and conformity Technical data: Cutting width: 2600 Cutting thickness: 6mm Strokes per minute: 24 Number of fasteners: 12 pieces Pressure: 10 to. Main drive: 11 kw backgauge ...

Hydraulic Shear HACO TSL-3013 Cutting capacity: 3050 x 13 mm Back gear gauge travel: 1000 mm Year of construction: 1989 Voltage: 380 V Weight: approx 10 T

Hydraulic Shear COMESSA CP 316 Capacity: 3000 x 16 mm Back gear gauge travel: 1000 mm Throat depth: 500 mm Motor power: 35 CV Adjustable blades 4 cutting blade Voltage: 380 V Dimensions (L x W x H): 3500 x 2200 x 2400 mm Weight: 16,5 T

Key data: 3100 mm, 6 mm

Max. cutting length: 3100 mm Max. cutting thickness: 6 mm steel Manual backgauge adjustable from the front up to 1000 mm Shear angle adjustment Cutting length limitation Knife sharpened Weight: approx. 6,500 kg

Hydraulic Shear HACO HS 3010 Capacity: 3000 x 10 mm Back gear gauge travel: 1000 mm Year of construction: 1983 Manual adjustment of the clearance between blades Cutting angle: 1° to 3° Voltage: 380 V Dimensions (L x W x H): 4000 x 2100 x 2200 mm Weight: approx 8 T

IRON WORKER (Universal Punching Shear) (Punching capacity) Punching capacity 70 Tons Diameter 28 x 20mm Thickness (Diameter 28 x 20mm thickness) Max cutting thickness in plate 20mm (Max cutting thickness in plate 20mm) Angle cutting up to 130x130x130x13 at 90°. Angle cutting up to 70x70x7 at 45°.

Vertical cutting shear, variable angle and motorized backgauge Cutting length: 2000 mm Cutting thickness: 6 mm Cutting force: 11 Tn Backgauge length: 15-740 mm Cutting angle: 2,5º Engine power: 5.5 CV Approx machine weight: 4300 Kgs Machine dimensions: 2650x1750x1080 mm Equipped with: Motorized backgauge Blades

AXIAL CP 1630 hydraulic shear Cutting length: 3100 mm Cutting thickness: 16 mm Throat depth: 350 mm Distance between frames: 3290 mm Cutting angle: 2º Cuts per minute: 8-12 Pump motor power: 50 CV Blade section: 100x40 mm Number of rammers: 25 Approx machine weight: 16.000 Kgs Machine dimensions: 3800x2500x2050 mm Equipped with: Hengstler digital backgauge: 1175 mm of length Ball table: Yes Manual wheel: for accurate approach of the gauge Digital counter for number of cuts: Yes Adjustment of the cutting length: Yes Lighting and projection of the cutting line: Yes Front protection grille: folding Hold down force with independent regulation: Yes Safety photocells: at the rear of the machine

The machine is in good technical condition. Cutting length 2500 mm The thickness of the cut sheet is 8 mm Steel shear strength 45 kp/mm2 Discharge 300 mm Adjustable angle 2°30- 1°20 Engine 18.5 kW; 1500 U/min El. control pump motor 1.5 kW; 1500 U/min Maximum working pressure 285 kp/cm2 Oil tank volume 225 l Length 3115 mm Width 3078 mm Height 1855 mm Weight approx. 7650 kg

Hydraulic shear (guillotine) Brand: Gester, Model TN-30, cutting chamber: 770x650 mm, motor: 4 KW (5.5 hp).

Hydraulic Shear PROMECAM GH 1230 A Capacity: 3000 x 12 mm Electrical Back gear gauge travel: 1000 mm Throat depth500 mm Photoelectric cells on the back New blades Length3600 mm Depth: 2400 mm Total height: 1900 mm Weight: 11 T

Description: Hydraulic guillotine shear , Serial number 7674 Maximum working width: 2100 mm Maximum cutting capacity: 6 mm Gooseneck: 300 mm Number of pressers: 11 pcs Main motor power: 15 HP Foot operated plate thickness: 6 mm, rare limit stop: 2,100 mm, weight approx.: 3,500 kg, Approx. Onsite Dimension. (l x w x h): 2,600 x 2,200 x 1,700 mm

Description: Punching shear Punching force: 45 Tn Max. standard steel thickness: 7 mm Max. punching diameter: 28 mm Strokes per min: 16 Foot operated weight approx.: 800 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,500 mm

Description: Universal shear , Serial number 3251 Cutting capacities: - L at 90°: 100 x 12 mm - L at 45º: 70 x 7 mm - T at 90º: 100 x 75 x 10 mm Bar cutting capacity: - Round bar: 35 mm diameter - Square bar: 32 x 32 mm Punching capacity: Round punch: - Maximum in 13 mm thickness: 28 mm diameter. - Maximum in 10 mm thickness: 35 mm diameter - Maximum in 9 mm thickness: 40 mm diameter. Square punch: - Maximum in 11 mm thickness: 25 x 25 mm , - Maximum in 9 mm thickness: 32 x 32 mm , - Maximum in 6 mm thickness: 42 x 42 mm Rectangular punch: Maximum in 8 mm thickness: 50 x 12 mm Maximum punching cross-section: 1020 mm2 weight approx.: 1,200 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 700 x 2,100 mm

Description: SPECIFICATIONS Character: NN Type: 750 Machine dimensions (L×W×H): 4,850 x 1,250 x 2,000 mm Measuring length: 750 mm Power main drive: 22 kW Electric drive: Yes Hydraulic drive: Yes Machine weight: 7,500 kg Scrap shear: Hydraulic lower holder weight approx.: 7,500 kg, Approx. Onsite Dimension. (l x w x h): 5,200 x 1,500 x 2,000 mm

Key data: 3020 mm, 6 mm, 750 mm

Combined CNC – controlled press brake / sheet metal shears Super compact machine with a very small footprint. Maximum cutting length 3,020 mm Nominal cutting capacity 6 mm sheet steel/ST 40 Cutting angle 1°30" 17 pieces of sheet metal hold-down, Ø hold-down plate 50 mm NC – controlled back gauge for guillotine shear station - adjustment range 750 mm Table height 750 mm. Maximum bending length between the side stands: 3,440 mm (column passage 3,550 mm) Maximum pressing force 1,000 kN Working height bending only 1,230 mm Lifting range bending station 170 mm Maximum installation height of the bending station is 250 mm (press beam surface in the lowest position), the backgauge adjustment range for the bending station is 750 mm. Dimensions including operating pendulum 4.25 m x 1.82 m x H 2.8 m Footprint 3.85 x 1.82 m Drive power 10 kW Weight 9,000 kg Equipment: ...