shear 3100 used for sale

Baykal HNC 6100x16 NC Guillotine Shear Maximum cutting length : 6100 mm Maximum cutting thickness : 16 mm Machine is in good working condition

METALPRES NHM 3006 hydraulic guillotine shears built in the Czech Republic in 2000, are used for precision cutting of black or acid-resistant steel sheets with a maximum length of 3000 mm. The NHM 3006 T guillotine shears have been regularly serviced and upgraded throughout their lifetime. In 2023, a general overhaul was performed with a net value of approximately PLN 16000, during which seals, clamps, controls, electrical installation with cabinet were replaced and the knives were sharpened. The price of the machine also includes a rack with saw for steel and a rack for sheet metal shown in the photos. The total weight of the METALPRES NHM 3000 3M machine is 2000 kg. Technical specifications of the METALPRES NHM 3006 guillotine shears - maximum cutting length: 3000 mm - maximum workpiece thickness (acid-resistant steel): 5 mm - maximum workpiece thickness (black steel): 6 mm - di ...

manual backgauge with mechanical counter Cuttinglength: 2050 mm Max sheetthickness st 45: 4 mm Passage between uprights: 2250 mm Strokes/min: 25 > 55 str/min Adjustable cutting device: 0,05 > 0,4 Backgauge: 750 mm Adjustable cuttingedge: 0,5 > 2° Electric motor (power): 5,5 HP Weight: 2,8 ton

sheet width: 1.050 mm plate thickness: 4 mm cutting angle: 2,5 ° table width: 510 mm table height: 820 mm back stop - adjustable: 600 mm no. of strokes: 35 Hub/min total power requirement: 3 kW weight of the machine ca.: 1.100 kg dimensions of the machine ca.: 2,06 x 1,64 x 1,21 m Basic equipment: - manual backgauge with 600 mm travel - Measuring stop 800 mm - Foot pedal with emergency stop switch - Bracket arms in front for workpieces - Cutting line lighting - Protective demarcation OPTIONS: - Pneumatic sheet metal lifting device - Optical safety bar - Miter device with adjustable - angle 0-180 ° - engine. Backgauge with NC control and 750 mm travel - engine. Backgauge with NC control and 1000 mm travel - piece counter More sizes at info @ rs-sperling .de The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Engine. Guillotine Shears Impact Shears Tin Shears Scissors Cutting Manufacturer: KRAMER Model TM IIa 3000x4,5 max. cutting length 3050 mm max sheet thickness at ST 40 4.5 mm Distance between uprights 3050 mm Projection 130 mm Table width 360 mm Strokes per min 30 pcs. Hold-down device 16 pieces Manual backgauge travel 5 – 550 mm Engine power 7.5 kw Machine weight 4000 kg Space requirements: W 3480 mm D 3600 mm H 1400 mm Foot switch Back gauge front support arms Angle stop The machine is in good condition and ready for immediate use. Machine runs very quietly. Forklifts available, freely loaded trucks Cheap shipping possible Location of the machine 48324 Sendenhorst for enquiries 0157-35496006 The price is net plus 19% VAT.

TECHNICAL SPECIFICATIONS Manufacturer: BHS Sonthofen Designation: Pre-ripper Type: VSR 1215 Version: Twin-shaft shredder / rotor shear Year of construction: 2018 Rotor diameter x length: 530 x 1,500 mm Operating hours: approx. 500 h Drive power: 2 x 90 kW Rotor speed (max.): 16 - 37 RPM Nominal torque: 33,000 Nm Number of tearing tools: 8 pcs. Width of tearing tools: 80 mm Total weight: approx. 22,000 kg SPECIFIC COMMENT - Incl. control cabinet/control - Incl. hydraulic pressure unit - Incl. steel substructure - Warranty for approx. 500 Bh - Shredding of domestic, commercial, bulky waste, waste wood, e-waste, plastics,...

: gebraucht : 1968 : 9581 : 5500 € : 1 : 1050 mm : 2 mm : 150 1/min : 500 mm : 1500 mm : 1700 mm : 1100 mm : 800 kg man. back gauge with hand wheel and scale user manual in GERMAN didn&apos,t according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutting Length 3050 Mm Max Cutting Thickness 6 Mm Rear Register Stroke 1000 Mm Angle Variation 0°30′ – 2°30′ Engine Power 7.5 Kw

Hydraulic Guillotine Shear Colmal 40 Motorized rear register Stroke Register 800mm Maximum thickness to cut 6mm Weight 9.5t Recess 500/200

Panel shears type Н3218Б or H3218B Working width approx. 2000 mm sheet thickness at 400 N/mm² approx. 6.3 mm functioning - Illustrations similar - Plate shear Type Н3218Б or H3218B Working width approx. 2000 mm sheet thickness at 400 N/mm² approx. 6.3 mm Functional - images similar -

sheet width: 1050 mm plate thickness: 3 mm distance between columns: 1100 mm back stop - adjustable: 600 mm connected load: 3 kW weight of the machine ca.: 1,1 t dimensions: 1,7 x 2,1 x 1,3 m The machine works quietly and it is energy-saving by its gear motor and brake system. Our machine is manufactured as steel construction monoblock body welded from ST42 quality material. The blades on the machine are of 2379 quality and the brand’s name is BOHLER. These high-quality blades ensure quality and precise cutting. Emergency stop button and finger guard grill are standard equipment of foot pedal machine. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Durma SBT 3010 CNC Guillotine Shear Machine is in good working condition

Novastilmec shear with cutting capacity 4200 mm x 12 mm thick. Cutting angle, gap between the blades and support of the automatic sheets. Sheet metal stop 1005 (incidentally cuts the paper again).

working width: 2000 mm for sheets up to: 3 mm Clear stand width: 2050 mm Stand discharge: 250 mm Support table size: 220 x 2200 mm electr. Drive: 380 V, approx. 5 kW Weight: 2.7 t

Used Colgar CM 303 CNC shears Visible in Italy Sold as it is

10′ x 3/4″ Cincinnati Mechanical Shear Material Width: 10′ Thickness: 3/4″ Serial # 6210 Model # 14611 Hardness: 300 Brinell 11 Hold-Downs Adjustable Entry Edge Guides

60″ x 10g Secrest Mechanical Shear Make: Secrest Machinery Material Width: 12″-60″ Maximum Thickness: .125″ Air Clutch & Brake Motor: 10HP AC

Sale guillotine shears (guillotine) Safan B-Shear 310-6 2013 release in excellent condition, there are all documents on diagnostics and maintenance work performed. Running hours 12 674

10′ x 3/8″ Cincinnati Mechanical Shear Material Length: 10′ Material Thickness: 3/8″ Front Guage Gap: 4″ Speed: 60 spm Auto Lube Number of Hold-Downs: 11 Electric Foot Pedal Digital Control Motor: 8HP AC

12′ x 1/4″ Cincinnati Mechanical Shear Material Length: 12′ Material Thickness: 1/4″ Model: 1812 Serial # 30782 Gap: 4″ Speed: 60 spm Auto Lube Number of Hold-Downs: 12 Electric Foot Pedal Digital Control Motor: 15HP AC

12′ x 3/8″ Pacific Hydraulic Shear Make: Pacific Serial # 1090 Model: 375R12 Maximum Width: 12′ Material Thickness: 14g – 3/8″ Knife Length: 144” Distance Between Housing: 12.5’ Electric Back Gage

12″ x .250″ Cincinnati Mechanical Shear Material Length:12′ Material Thickness: 1/4″ Model: 1812 / Serial # 33664 Gap: 4″ Speed: 60 spm Auto Lube Number of Hold-Downs: 12 Electric Foot Pedal Digital Control Motor: 12HPAC

Working width: 3000 mm Sheet thickness: 4 mm Projection: 100 mm Backgauge: 500 mm Drive power: 380 V, 7.5 kW Space requirement: 3400 x 1600 x 1700 mm Weight: 4500 kg

NEW MACHINE – READY FOR INDUSTRY 4.0 ESA S640 CNC control Cutting length mm 3070 Nominal thickness mm 10 Frontal protections with photocells Pneumatic sheet support Cutting thread Cutting angle adjustment 0.50° – 2.00° Rear register stroke mm 1000 Shots at 1 minute 12-18 Main engine power kW 22 Approximate weight 11000 kg Use and maintenance manuals

Shear with a capacity of 3 mts x max. 12 mm of mild steel cutting thickness,

Machine in good technical condition, currently disconnected. Maximum cutting length: 3150 mm Maximum cutting thickness: 10 mm Minimum sheet cutting thickness: 1 mm Total power consumption: 22 kVA Machine weight: 11.5 t

Capacity 3100 x 6 mm Pneumatic elevation table at the rear ENC 100 M control

Capacity 3050 x 6 mm Electrically adjustable back gauge

Capacity: 6200 x 13 mm (steel) Delem DAC 350 control NC controlled back gauge NC controlled sheet thickness adjustment

Capacity 3100 x 6 mm Pneumatic elevation table at the rear ENC 100 M control

Hydraulic sheet metal shears make VOEST-ALPINE type BTHS 8 x 3150Fabr. -No: MBO-565Technical specifications:max.cutting length: 3150 mmmax.sheet thickness: 8.0 mmThroat: 300 mmInfinitely variable cutting length adjustment: 500 - 3150 mmStop adjustment range: 0 - 1000 mmWeight about 10.2 tDimensions approx: 3500 x 2300 x 1900 mmwith- motorized backgaugeused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic guillotine shears make LUTHER type TS-S 25/4Year of construction 1973Technical specifications:Max. cutting length: 2530 mmMax. cutting thickness at 50 kg strength: 4.0 mmlateral projection: 200 mmTable height: 750 mmStrokes per minute:45Drive power: 15 kWDimensions L x W x H: 3010 x 2150 x 1800 mmWeight approx.: 6100 kgwith- Motorized backgauge- foot switch- angle stopusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Manual sheet metal shears make PEXTO type 137 / LMachine -No: 10/70Technical specifications:Cutting length: 1020 mmCutting thickness normal steel: 1.6 mmTable width: 300 mmWith- 2 extension arms 600 mm- foot disengagementused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Machine in good technical condition, possibility of testing after agreement. Max. length of cut sheet: 3150mm Max. thickness of cut sheet: 6.3 mm Weight: 8500kg.

Capacity 3100 x 10 mm Delem DAC 350 control good condition inspection possible

Lever guillotine shears make HUNDT - KRAMER type HBS IIISerial -No: 48001 year of manufacture 1990Technical specifications:Useful length: 1020 mmMax. sheet thickness: 1.25 mmWidth stop adjustable: 0 - 550 mmExternal dimensions: 1800 x 950 x 850 mmWeight approx.: 250 kgwith- open sheet metal holding for longer cuts in the push-through procedureused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Heavy motorized circle Scissors make PARX type KSM 6 SMachine -No: 3962 Series -No: 36/79 Year 1979Shear performance up to 40 kg strength: 15 mmShear capacity up to 105 kg strength: 9.0 mmminute Diameter of the tube: 450 mmMax. Diameter of the tube: 1600 mmDischarge between the stand and knife: 625 mmCutting speed: 10 m / min.Drive power: 11 kWWeight approx: 8,2 tused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Motorized sheet metal shear make LOTZE Year of construction approx. 1960 Working length: 1500 mm Sheet thickness (steel): 8 mm Motor power approx .: 17 kW External dimensions approx. L x W x H approx .: 2500 x 1900 x 1600 mm Weight approx .: 5 t With: - 2 front support arms - Angle stop - Foot release - Finger guard used, in very well maintained and functional condition Price on request. Delivery: ex warehouse or location free loading truck. Payment: net at takeover or by appointment. Technical data are not binding. Errors excepted. We would be pleased, if you like our offer and are always available for your queries. Best regards M. Waldeck WAHO Machine Tools

Crank sheet metal scissors make LOTZE type probably KShy 25Max. Cutting length: 2500 mmMax. Sheet thickness approx: 5.0 mmlateral projection: 70 mmTable width: 500 mmDimensions L x W x H: 3100 x 1600 x 1300 mmWeight: 4000 kgWith- Table extensionthe front cover plates are missingused, despite the year of construction in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Capacity 6070 x 6 mm Electric back gauge Elevated table at the rear

Sheet metal and steel shears manufactured by PEDDINGHAUS type 4 BR 8Year of construction 2013Sheet steel up to: 8,0 mmRound steel up to: 20 mmSquare steel up to: 18 mmKnife length: 175 mmWeight approx: 43 kgExternal dimensions: 600 x 18 x 500 mmvery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Motorized tin snips make TRUMPF type OMS 450Machine -No: 94278Technical specifications:Cutting capacity: 4.5 mmCutting speed: up to 4 m/min.small radius to be cut: 30 mmNumber of cuts per minute: 1400Power: 1100WPower connection: 380 V / 50 HzWeight approx.: 100 kgExternal dimensions: 350 x 2500 x 1100 mmWith- Pillarused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Capacity 3050 x 6 mm Adjustable backgauge

Combined lever shears make PEDDINGHAUS type 5 RP 10Machine -No: 992815Technical specifications:Blade length: 175mmPerformance sheet steel up to: 10 mmPower angle iron: 80 x 8 mmPerformance bar steel shears round: 22 mmPower bar steel shears square: 20 mmPerformance profile steel shears: 60 x 7 mmDimensions approx.: 700 x 200 x 700 mmApprox. weight: 107 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Machine in good technical condition, possibility of testing after agreement. material thickness up to 4mm cutting length 2000mm engine: power 5.5 kW, speed 1500 min-1 Machine weight 3000 kg. Machine dimensions L x W x H approx. 3000mm x 2000mm x 1300mm.

Cutting width: 3900 mm Dimensions (LxWxH): 5100 x 1700 x 3100 mm Height without legs: 2410 mm

Capacity: 3100 x 8 mm (steel) Cybelec NC backgauge Rear entry protection

The machine is in good technical condition. Max. length of cut sheet: 4000mm Max. thickness of cut sheet: 6mm Controlled rear stop with a range of 1000mm (stroke) Manually adjustable knife spacing Stroke height regulation Weight: 11,000 kg

Capacity 4100 x 6 mm Cybelec DNC 60 CNC control Pneumatic elevation table at the rear Electric cutting gap and angle adjustment

Capacity 3050 x 6mm Touch screen control Electrically adjustable backgauge and cutting gap High support table at the rear with return to sender Small parts are ejected at the front