shaving used for sale

5 AXIS – CNC GEAR SHAVING MACHINE (+ GEAR HARDENING) make : MIKRON CIMA model : H 250 CNC COMPONENTS : outer diameter : 25-250 mm. width (gear) : max. 150 mm. length (shaft) : max. 580:600 mm. module : 0.5 – 5.5. WHEEL : outer diameter : 300 & 350 mm. width : max. 50 mm. swivel angle : (R) 25 & (L) 25. REVOLUTION : wheel speed : 10:750 rpm. component speed : max. 8000 rpm. TABLE : feed speed : 1:1000 rpm. stroke : (R) 100 & (L) 100 mm. swing angle by crowning : max. 3° CUTTING METHODS : plunge. plunge with oscillation ( table feed ). conventional. CNC : 5 axis CNC CONTROL UNIT ( FANUC SERIES 0M-C). POWER SUPPLY power circuit : 3 phase AC380V 50Hz. control circuit : AC 100V & DC 24V. total power : 20 KVA MACHINE WEIGHT : 5000 Kg. AC SERVO MOTOR model 0S (0.55 Kw) AC SERVO MOTOR model 5S (0.9 Kw) AC SERVO MOTOR model 1 0 S (1.8Kw) AC SERVO MOTOR model ...

4 AXIS CNC GEAR SHAVING, SICMAT – SATIN 100S (Same as 200S) Brand: SICMAT Model: RASO 100S CNC: SIEMENS 810 Workpiece outside diameter: 200 Module range: 0.5-5 mm Workpiece max face width: 100 mm Machine still working Other information: THE MACHINE IS IN EXCELLENT CONDITIONS AND COMPLETE IN ALL ITS PARTS (STILL WORKING)

New machine Stainless steel model 24-month warranty Benefits: + very good value for money + Machine is completely in stainless steel (also the collecting bowl) + Chocolate rasp in uniform thickness (0.1 - 3 mm thick) + rattles 2 chocolate blocks (up to 2.5 kg each) + easy to use + hygienic, easy to clean and keep clean + Drive meter can be replaced separately + with speed regulation Technical data: - suitable for 2 blocks of chocolate (up to 2.5 kg each), - Dimensions for chocolate blocks (min - max): --- width: 17 - 40 mm --- depth: 145 - 210 mm --- height: 40 - 330 mm - Device dimensions: 393 x 370 x 638 mm (WxDxH) - Engine power: 90 W - Connection values: 230V - 1Ph - 50Hz - Net weight: 30 kg

max. wheel diameter:40-160 mm gear width:90 mm max. module:3,5 min. module:1,25 weight of the machine ca.:5,6 t For detailed technical data, see PDF File Page 15-16

max. grinding diameter: 400 mm : 18010 shaving cutter - diameter: 64 - 320 mm indexing: schleifbar 1 -12 Modul shaving wheel width: max. 40 mm number of teeth: 13 - 240 roller bend diameter min./max.: 73 - 320 mm slide speeds: 5-20-30-40 Zähne/min. max. dia. of grinding wheel: 762 mm grinding wheel - swivable: 5-21 ° grinding slide swivable +/-: 2 x 35 ° total power requirement: 3 kW weight of the machine ca.: 4,2 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Made in Italy machine according to DIN 8606 Tip height: 260 mm Turning diameter over bed: 520 mm Swing over carriage: 300 mm Centre distance: 1500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8 " Spindle speeds: (24) 9-1600 rpm (option 11-2000 U/min) Engine output: 5.5 kW (option: 7.5 kW) feed Z-axis: (93) 0.028 6.43 mm / Rev Feed x axis: (93) 0.012 2.73 mm / Rev Thread, metric: (54) 0.5-224 mm Thread, Witworth: (55) 72 - 1/8 TPI Thread, module: (54) 0.5-112 mm Thread, Diametral Pitch: (54) 64 - 1/4 D.P.. Cross slide Lxw: 650 x 230 mm Transversal carriage stroke: 340 mm Upper carriage Lxw: 350 x 150 mm Upper carriage stroke: 150 mm Tailstock Quill diameter: 85 mm Tailstock Quill stroke: 200 mm Tailstock taper: MK 5 Weight: 3,100 kg Facilities: -Movement of the tailstock pneumatically supported -Acceptance Protocol according to DIN 8605, ...

Standard equipment torsion-resistant, robust cast-iron saw frame driven shaving brush powerful industrial worm gear motor automatic shutdown after cutting end mechanical saw band tension with electrical band breakage monitoring Quick-release vice, movable Hydr. Saw frame lowering with rapid response function (infinitely adjustable) electric coolant pump Precision carbide saw band guides, ground (adjustable) large-sized round support table, with miter cuts, miter indicator (scale) to the operator side direct switching from manual operation to downing mode easily removable chip collecting tray Material stop 500 mm with scale incl. saw band combing gearing 4/6. Techniche Data Motor three-phase current 400 V, pole switchable 1.1/1.5 kW Saw band Dimensions 2720 x 27 x 0.9 mm Flywheels 300 mm Cutting speed 40/80 m/min. Vice-height span 275 mm Working height 978 mm Weigh ...

Made in Italy machine according to DIN 8605: lathe with increased accuracy. Tip height: 215 mm Turning diameter over bed: 430 mm Swing over carriage: 240 mm Top width: 1,000 mm Bed width: 290 mm Spindle bore: 52 mm Spindle nose: Camlock 6 " Spindle speeds variable: 6 Spindle speeds: 60-2,000 rpm S6/S1 engine power: 4 kW (option: 5.5 kW) feed Z-axis: (38) 0.05 - 1.88 mm / Rev Feed x axis: (38) 0.02 1,084 mm / Rev Thread cutting, metric: (30) 0.45-20 mm Thread cutting, Witworth: (35) 80-1 3/4 TPI Thread cutting, module: (25) 0.25-10 mm Thread cutting, Diametral Pitch: (30) 160-3 1/2 D.P.. Cross slide Lxw: 370 x 190 mm Transversal carriage stroke: 240 mm Upper carriage Lxw: 275 x 115 mm Upper carriage stroke: 120 mm Tailstock Quill diameter: 60 mm Tailstock Quill stroke: 135 mm Tailstock taper: MK 4 Weight: approx. 2,000 kg Facilities: -Infinitely variable  ...

BACHILLER PC-200 Complete Process equipment (2004). Unused Processes: Dispersion, emulsion, humidification, grinding, homogenization, dissolution, mixing, suspension and vacuum deaeration. For suspensions, emulsions and dispersions. For the preparation of any liquid or pasty product since all manufacturing operations can be carried out in a single device, from the loading of the ingredients to the deaerated and preparation prior to packaging. It combines different basic elements of agitation such as the colloid mill, disperser and mixer-scraper ideal for suspensions, emulsions and dispersions. Sectors: pharmaceutical, cosmetic, food or chemical industry. In stainless steel The PC incorporates: - Agitation, grinding and dispersion devices with independent actuation. - Colloid mill with real grinding action, thanks to the milling of its elements and the regulation of sepa ...

Equipped with no. 03 guides Overhauled with: guide grinding, CN conversion, new electrical and hydraulic system, hydraulic self-centering installation, shaving conveyor; CN Fagor 8055 Numerical Control – BT Maximum turnerable diameter 1800 mm 3-grife hydraulic self-centering with a diameter of 1450 mm with tightening force 30 Ton with 30 bar clamp L max turnerable 3000 mm Spindle engine power 110 Kw Maximum rotation speed 180 rpm Fast value axles 4000 mm/min M3/M4 Spindle Rotation Inversion Possibility 4 speed ranges Hydraulic counterpoint Maximum capacity of workpiece on counterpoint 12500 Kg It is currently possible to work details of up to 3000 mm length but the extension pallet is available to be able to work details up to 8 m in length. (un revised); Machine installed and working

Type: Treif Divider Type 2550 Slices are precisely stacked on top of each other even when the stacks are 100mm high The slicer can also be equipped with the automatic shaving function upon request The machine can also accommodate the off-set delivery of products such as cheese Compact and space-saving design ensures optimum utilization of space-saving High degree of flexibility: Product can be changed without mechanically changing the system Special solution: expanded chamber up to 220 mm to accommodate Italian Mortadella for example Dimension of the machine Length: 210 cm Width: 80 cm Height: 210 cm Electrical power: 4.8kW Delivery time: 30 working days after payment

max. wheel diameter: 1600 mm gear width: 250 mm max. module: 20 min. module: 1,5 base circle dia. - max.: 1450 mm base circle dia. - min.: 150 mm specimen weight from/to: 4000 kg feeler adjustment movement - parallel: 1400 mm max.helical angle: 0 - 90 ° wheel diameter with counterstay: 1000 mm feeler adjustment movement - parallel: 800 mm centre height: 1150 mm electrics - voltage/frequency: 400 / 50 V/Hz dimensions of the machine ca.: 2,8 x 2,4 x 2,3 m total power requirement: 2 kW weight of the machine ca.: 3 t Universal Involute and Helix Testing Machine - modernized 1995 Machine is suitable for measuring all individual tooth data on straight and helical spur gears, and shaping and shaving cutters. Following tooth data can be tested: Tooth flanks, Involute base circle dia. and pressure angle, Profile c ...

GENERAL Project No.: 905398 Quantity: 1 pcs. Manufacturer: EMAG Type: VL 3 Control: Fanuc 18i TB Year of construction: 2001/2022 State of condition: Refurbished machine Layers approx.: 2-3 layers DESCRIPTION TURN circulation diameter over bed cover 210 mm chuck diameter 170 mm speed main spindle 7500 1/min power main spindle at ED 10-40/100% 25/16 kW torque main spindle at ED 10-40/100% 134/85 Nm Spindle diameter in the front bearing Main spindle 80 mm Spindle flange size main spindle size 5 (DIN 55026) Axes on the main spindle unit X/Z Travel in X/Y/Z main spindle unit 400/-/200 mm rapid traverse speed in X/Y/Z main spindle unit 60/-/30 m/min Feed force in X/Y/Z main spindle unit 5000/-/5000 N Direct displacement measuring system main spindle unit X/Z Full clamping cylinder on the main spindle Revolver bottom Number of stations/driven by 12/12 Tool ho ...

max. wheel diameter: 40 - 160 mm gear width: 90 mm Control: SIEMENS SINUMERIC 840D Gear shaving - / deburring machine The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 40 - 160 mm gear width: 90 mm Control: SIEMENS SINUMERIC 840D Gear shaving - / deburring machine The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 20 - 2650 mm gear width: - mm max. module: 32 distance between centres: 1850 workpiece weight max.: 10.000 kg Machine can be inspected under power. Setting-up and installation at the customers is possible against extra charges. Equipment / Accessories: - clamping table diameter 1100 mm - steady rest - clamping devices - carriers - levelling shoes - hardware updated to Windows 7 - gears / straight and helical - internal and external gears - measuring of tool cutters (grinding wheels, shaving cutters, milling cutters) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

KP Aerofill Pump Spray Line Pump Spray Line – Monoblock Filler Capper for pump sprays – Consists of a KP Aerofill PC24 monoblock filler pump inserter crimper and a KP Aerofill CAP 60 capper for push on over caps. Perfect line for all pump spray products such as: perfumes, mouth sprays, cooking oils, shaving oils, lens cleaner, pain relief sprays, hair sprays, etc. Key Information: Year: 2002 Model: PC24 and CAP60 Monoblock filler, pump insert and crimp capping 4 filling heads with two crimp capping stations Over cap capper Capacity: up to 80 bpm

MATEC easily from our own development and production running lightly and quietly and transport bulk material and individual loads up to 250 kg with minimal energy over long distances up to 12 m at a time with a hand drill 300 w power consumption. The combined forced - and promotion of resonance stores the kinetic energy in the spring and must compensate for only the frictional resistance of the material. Sawdust, shavings, gravel, Earth, grain, hay and grass, etc. are exactly same speed transported with approximately 17 m / min. by means of Frequenzumforner the speed can be adjusted. The transport and screening in a single operation with a built-in sieve base perforation on request MATEC Vibrorinne standard Trough width inner 500 mm Trough height inner 260 mm current trough length 2500 mm (can front and rear to 1.5 m be extended without additional support) In addition current ...

MABS1500 Extraction system metal for metal shavings easy filter change large collection container with drawer stable housing Engine: 1500W, 230V or 400V Suction capacity 1500 m3/h Fan wheel diameter: 300mm Suction connection: 100mm Weight 73kg

intake connection: 180mm; volume flow: 4200 m³/h; chip bag volume: 2 x 175 l; filter regeneration: manuell; motor power: 3,8 kW; machine diamensions: 1700 x 600 x 2400 mm (L x B x H); weight: 69 kg; The exhaust system FT 302 N impresses with its enormous suction power, high economy and the favorable price-performance ratio. Due to the possibility of connecting four machines at the same time, this model is also suitable for smaller workshops. properties High air output due to aerodynamically shaped fan made of sheet steel Ideal tool for extracting sawing, milling and wood shavings Simultaneous connection of four machines possible Higher ease of use thanks to generous chip bag volume Uncomplicated, fast chip bag change through tension belt Increased mobility through standard suspension delivery filter bag chip bag drive system

automatic chamfering and beveling machine Development and production in England - CNC Mitsubishi control M70 - automatic start of the cycle - automatic switch-off in case of repeatable chamfer lengths - Colour touchscreen control panel - max. spindle speed 3,000 rpm - Rod diameter 8-80 mm - hydraulic 3-jaw chuck - Cutting head suitable for all material sizes - quickly replaceable ISO inserts - max. chamfering/turning length 37 mm - Incl. turning and chamfering tool - 4 kW motor - High-precision Mitsubishi servo drive - Ball screw with high thrust capacity - Large machine door - Internal, powerful LED work light - Shavings collection container with external shavings basket - Lifting points for pallet trucks - Weight 500 kg - Dimensions L/W/H 1000x600x1200 mm CE - certified

Briquette press with extraction system Make Mütek Type MPP60 Year of construction 2011 Briquette mould cylindrical Diameter 50 mm Depending on the material, capacity up to 60 kg/h Drive motor 5.5 kW Volume of chip hopper approx. 0.7 m³ Weight of the press 680 kg Dimensions briquette press 1680 mm x 1100 mm x 1500 mm Height with container 2050 mm Including extraction system 33 filters, filter length 1300 mm, diameter 200 mm Extraction system filter area 27 m² Capacity 2,970 m³/h Fan motor power 5.5 kW Intake diameter 300 mm Overall dimensions with extraction system and fan 4300 mm x 1150 mm x height 3700 mm Almost all shredded materials can be briquetted with a residual moisture content between 6% and 18% without binder. e.g.: wood shavings, milling and sawdust, dust, paper, cotton flaky, coconut, wheat straw, hemp, hay, flax, plant stems, mal ...

Manufacturer: Homag, Type: KL 10/21/QA, Year: 1999, Program: Homatic, Control: PC 21, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 50, Min.-max. workpiece length in mm: 150-3500, Min.-max. workpiece height in mm: 10-60, Edgeband height max mm: 65, Min-max feed m/min: 10-30, Axis control: yes, Infeed table: no, Einlauflineal gesteuert: yes, Premilling: yes, Application of separation agent: yes, IR zone: yes, Strip magazin: no, Mitre stations: yes, Pre-milling: yes, Radius milling axis adjustment: yes, Corner tracing type: FK 13, 2 Motoren: 2, Magazin : 2 X 12, with tool holders: HSK, Grooves, slewable-controlled: Freiplatz, Radius scraper: yes, Scraper with axis adjustment: yes, Flat scraper: yes, Corner trace buffing: no, Corner trace buffing: no, Bonding part EVA: 2 Stück, Number of tools per tool-magazine: 2 X 8, Buffing unit: yes, Roller/belt: Riemen, Freiplätze:  ...

Briquette press for metal granules or shavings or slurries Machine is as good as new, has only 20 bh Hydraulic motor 55 kw Pressing pressure 2000 kg/m2

This is a fully refurbished, VERY powerful, multitasking Two (Twin) ARP Shaft Shredder. The machine has gone through complete check and change of all flanges, bearings, reducer and oil inside. The machine full specs are: - New motors of total power 20hp - 15kw (2 x 7,5kw motors) - Alternative hydraulic power motors which fit perfect if the machine needs to work on a truck. - 24 knife pieces X 20mm per piece - Made in Germany - Cutting chamber 500mm X 575mm - Approximate weight 2 tons - New control panel with Siemens PLC, Star - Delta, over-current and over-temperature motor protection, Amper Display. - Automatic reverse upon overload and optionally manual forward and reverse. - Special hood used for small items (ie. paper, hard drives) or big hood for barrels and wood. - Hood opens in front for adjusting belt conveyor This is ...

Corta Dürselen multi-spindle paper drilling machine. The PB05-750 is a multi-spindle paper drilling machine. with PLC control program. Module rear table with automatic saddle. Drill shavings suction system. 8 x drill heads (4 x new)

Wagner WDC 660x2000 lathe with Siemens 828 Shopturn CDC control: - 3 range changes - automatic gearbox - constant cutting speed - bench guides induction hardened, ground and covered with turcite - Hardened and ground precision ball screws - electrically ensured self-centering protection - manual tailstock, MK6 sleeve - centralized automatic lubrication of the guides - RS232 interface - complete refrigeration system - machine lamp - integral fairing with 2 sliding doors and safety glass window - 1 set of machine leveling pads - service tool - 8-position hydraulic revolver 25x25 - Fixed steady rest with rollers from 50 to 225mm - Self-centering with tangential control ra - Transport of shavings with wagon Complete with user manuals and control instructions Year of production: 2017 Working hours: 650 Technical detials: Maximum rotating diameter above the bed 660 mm  ...

Briquette Press Briquetting Press Made by Weima Type th 40 Built in 1985 Hydraulic briquette press Capacity, depending on material, approx. 60 kg/h Briquette diameter 50 mm Hydraulic motor 5.5 kW Hydraulic oil 100 liters Length of the machine 1200 mm Width 900 mm, height 1200 mm Weight approx. 650 kg Chip hopper with agitator and screw Dimensions 1600 mm x 1600 mm x H 1300 mm The briquette press also includes an extraction system, which is included in the price. Extraction system Spänex Fan motor power 2.2 kW 6 filters length 1000 mm, diameter 200 mm 1 filter length 1000 mm, diameter 500 mm approx. 4 m² filter area, capacity approx. 442 m³/h Dimensions, dimensions of the chip press with container approx. 3000 mm x 1600 mm x H 1300 mm Dimensions, set-up dimensions of the chip press with container and extraction system approx. 3000 mm x 2500 mm x H 2700 mm ...

Roders RXP600 DSH Precision High Speed ​​CNC Milling Center Machining range for horizontal table position: X 500 mm, Y 855 mm, Z 400 mm Distance from spindle nose to table: 515 mm Tool magazine: 28 positions Overall dimensions in transport position: W 2300 × D 2800 × H 2920 mm. Total weight: 10200kg. Spindle Model: FISCHER HSC 40 - high-frequency milling, vector-controlled spindle, FISCHER (Germany) Power: 14 kW, 3000-42.000 rpm Tool holder HSK 40: Maximum tool diameter: 16 mm. Desktop Swivel rotary table with thrust bearings for highest rigidity and accuracy, integrated in the X-axis. A-axis tilt range: +/- 115 degrees. C-axis tilt range: +/- 360 deg. Workpiece weight: 200 kg. T-slot table size 340 × 340mm (ø400) Groove width: 12mm. Distance between grooves: 45 mm. Linear motors: all axes Cooling of the main a ...

Briquetting Press Briquette Press Spänex Type SHB 50 K1 CE Built in 1986 Hydraulic briquette press With shavings container K1 Briquette mould 8-sided Briquette size 70 mm x 120 mm Capacity 50 kg/h Drive motor 5.5 kW Hours 35665 Wood moisture minimum 8% - maximum 20% Weight of the press 650 kg Chip container size 3m³ Chip hopper with agitator and feed screw Dimensions set-up 1500 mm x 1500 mm, height 2250 mm Almost all shredded materials can be briquetted with a residual moisture content between 6% and 18% without binder. e.g.: wood shavings, milling and sawdust, dust, paper, cotton flaky, coconut, wheat straw, hemp, hay, flax, plant stems, malt germs, ... The maximum chip size should not exceed 20 x 1 mm. Due to their density, briquettes have a volume reduction of up to 90% in the material and thus an extremely high energy and thus calorific value 2.5 kg of ...

Description: Significantly improves suction of uncompacted tool shavings New item on order From payment it might takes approx 15 days for collection Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg

Description: Double shaft shredder, 380 volt power supply, ideal for plastic, wood, iron shavings, paper. Loading mouth 620x570, never used 0 hours Article available from  ,29/05/2024 Approx. Onsite Dimension. (l x w x h): 1,500 x 1,000 x 1,500 mm, weight approx.: 1,000 kg

Description: Double shaft shredder, 380 volt power supply, ideal for plastic, wood, iron shavings, paper. Loading mouth 620x570, never used 0 hours Article available from  ,29/05/2024 Approx. Onsite Dimension. (l x w x h): 1,500 x 1,000 x 1,500 mm, weight approx.: 1,000 kg

Description: Double shaft shredder, 380 volt power supply, ideal for plastic, wood, iron shavings, paper. Loading mouth 620x570, never used 0 hours Article available from  ,29/05/2024 Approx. Onsite Dimension. (l x w x h): 1,500 x 1,000 x 1,500 mm, weight approx.: 1,000 kg