129,247 used machines on RESALE, but how to find them? Machine Search
vert. Internal broaching machine maximum tractive force: 10T Max stroke: 1000 mm Max cutting speed: 10.9 m / min Max reverse speed: 27.5 m / min Clamping surface: 400 x 400 mm Room set: 3 piece
T-Shape 3 in1 Multisystem // Year of manufacture 2020 T-Shape combines 3 powerful technologies that work simultaneously to promote the production of collagen and significantly reduce the local volume of fat and elasticity of the skin. It provides a deep and immediate increase in blood circulation and lymphatic drainage, which in turn improves physical fitness - Tightening of the skin - Reduction of cellulite - Reduction of fat deposits - Reduction of scope - Treatment after liposuction - Face lift and skin tightening RF (Radio Frequency) T-Shape generates a bipolar, quadripolar and hexapolar radio frequency signal. Heat is generated by the contact of the RF (radio frequency) energy with the tissue impedance. With proper heating, the collagen-rich dermis is immediately denatured, the fibrils contract and thicken. In response to the initial heat, new collagen is produced, an ...
weight of the machine ca.: 7.800 kg dimensions of the machine ca.: 3.380 x 3950 x 3015 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. wheel diameter:300 mm gear width:110 mm max. module:6 weight of the machine ca.:10,5 t
Corner circular shaping machine Foellmer M; good condition; cleaned and tested; knives for straight corner section; .max. Insert height 65mm; Corner section max.70mm; Foot switch. Corner cutter Foellmer M; good condition; cleaned and checked; knife for straight cut; max.pile hight 65mm; corner cut max.70mm; Foot switch.
max. wheel diameter: 400 mm gear width: 75 mm max. module: 0,5 min. module: 6 total power requirement: 25 kW weight of the machine ca.: 7000 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Infeed and outfeed chain conveyor, with tool holders, chip conveyor, hydraulic unit and air conditioning.
max. wheel diameter: 400 mm gear width: 75 mm max. module: 0,5 min. module: 60 total power requirement: 25 kW weight of the machine ca.: 7 t dimensions of the machine ca.: m L O R E N Z (Germany) High Performance Automatic Gear Shaper Model LS 400 Year 1975 Serial No. 12 592 ______________________________________________________________________ ___________ External gear, max. Ø 400 mm (possibly larger) Internal gear dia. 350 mm Gear width, max. 75 mm Module range 0.5 - 6 Length of stroke 82 mm Adjustment of stroke position 0 - 100 mm Distance between shaper spindle and machine body 250 mm Spindle taper MK 5 No. of strokes, roughing/finishing process 118 - 1,000 per min Table size 400 mm Table bore 125 mm Mounting height between table and shaper head 190 / 290 mm Axial travel of tool slide, approx. 295 mm No. of teeth, approx. 12 ...
max. wheel diameter: 265 mm gear width: 45 mm max. module: 4 min. module: 0,3 max. workpiece diameter: 300 mm stroke length max.: 0-50 mm stroke position adjustment: 25 mm distance work spindle /surface of the table: 170/245 mm spindle taper: innen MK 4 table-size: 180 mm table hole: 95/75 mm strokes per minute: 450 - 840 total power requirement: 10 kW weight of the machine ca.: 5200 kg dimensions of the machine ca.: m : : : : : : : Max. gear Æ (external) approx. 265 mm Max. workpiece Æ for internal gears 300 mm Max. gear width 45 mm Module range 0.3 - 4 Length of stroke 0 - 50 mm Adjustment of length of stroke 25 mm Distance between table and spindle, min./max. 170/245 mm Spindle taper (external 90 / internal 50) MT 4 Table size 180 mm Table bore 95 / 75 m ...
NEW BUTTER EXTRUDERS AND SHAPING MACHINES BUILT BY New Butter Extruder and Shaping Machines By Butter Extruder and Shaping Machine Butter Extruder Semi - Automatic Butter Extruder, Shaping and Cutting Machine fited on full stainless steel frame, Control panel. Two Stainless steel screw augers, stainless steel hopper. Cutting wires on outfeed conveyor making the machine user friendly . Extruding, Shaping and Cutting Machine Emergency Stop Button. Condition :New Mould Samples TECAFORM AH Blue Our New Special Designed Extruding Outlets TECAFORM AH Blue meets all applicable requirements for declaration of Food Contact. European regiulation EC 10/2011 and Ammednments European Regulation EC 1935/2004 Council Regulation EC 2023/2006 (GMP) FDA §21 CFR 177.2470 We use High Quality Parts Uses High Quality parts on the new range of DMUK EXSH 1 by Adding Certified Reducers, Stainless Steel Parts an ...
max. wheel diameter: 85 mm gear width: max. 125 mm max. module: 3 Control: ja total power requirement: 30 kW weight of the machine ca.: 8 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A Hahndorf keyway slotting and broaching machine is available. Stroke range slotting: 60mm-300mm, max. slot width slotting: 34mm, max. slotting length: 300mm, max. slot width broaching: 14mm, max. broaching tool length: 640mm, max. cutting speed forward/return: 3m/3m/min, weight: approx. 300kg. Documentation available. On-site inspection is possible.
Control: SIEMENS table surface area: 160 mm weight of the machine ca.: 10 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. wheel diameter: . mm gear width: . mm max. module: . min. module: . Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A Welter slotting machine for gear and profile machining is available. Stroke: 1250mm, machine dimensions X/Y: 3800mm/5600mm, weight: approx. 12500kg, control: Siemens. The machine was retrofitted in 2011. Documentation available. On-site inspection is possible.
This 4-axis Lorenz LS 420 was manufactured in 2008. It features a NUM control system, capable of handling external and internal splines, single points, and segment splines. It can manage spline jointing up to B = 25 mm and spline hub profiles. The stroke length is 140 mm. Consider the opportunity to buy this Lorenz LS 420. Contact us for more information.
Behr ST 150 Vertical Shaping Machine -Masch.-Nr: 096, -large stroke: 150 / 175 mm -Tilt adjustment of the ram in both directions: 5 / 8 degrees -Height table / UK ram guide: 260 mm -Rotary table diameter: 340 mm -Longitudinal displacement of the table: 320 mm -3 lifting speeds: 17 / 54 / 108 H/min. -Gr. groove width: 16 / 26 mm -External dimensions approx.: 960 x 1530 x 2030 mm with - Feeds in X and Y (back and forth) -Speed adjustable - Adjustment of rotary table manually
max. wheel diameter:200 mm gear width:50 mm max. module:6 table diameter:168,14 mm boring diameter:65,532 mm weight of the machine ca.:11 t table turning speeds:0-1.000 U/min length of stroke min./max.:0-70 mm no. of strokes:180-1.800 Stück
maximum number of results exceeded
please refine your search
