shaper used for sale

Onsrud twin table copy shaper ONSRUD-auto dual table rotary shaper, model RS-28, for continuous production, 2-speed cutter (5,000/10,000 rpm.) pivots alternately to the right or left table, as center clamp engages, the table rotates, the cutter pivots into your part and continues around template machining the part, the operator unloads and loads new part on alternate table, when cut is complete, operator presses the foot pedal, the cutter then pivots to alternate table &cuts, cycle continues.. $9,900 Contact Fred (716) 433 4224 (12:00 noon is best time to call)

HELMA- model CF-40-copy milling/shaping machine feed thru with work piece return (2) milling spindles- 18" max. distance between the spindles centers- 28" x45" Table - (2) 30mm. work spindles- 10,500 RPM spindles- 4"max. cutting height - vertical adjustment 10 mm.- (2) 7 1/2 hp. spindle motors - 1/2hp. variable speed feed motor 5' to 30' per min.- 2,200 lbs. $7,500

Filling station for oil, compressed air pump for fresh oil, remote oil equipment, oil dispensing device, oil filling device, oil transfer pump, gear oil pump, hydraulic oil pump, oil centrifugal gear oil pump -operated: by hand -2x: separate tanks with pumps -with return: into the tank -Dimensions: 800/530/H1100 mm -Weight: 88 kg/piece

Filling station for oil, compressed air pump for fresh oil, remote oil equipment, oil dispensing device, oil filling device, oil transfer pump, gear oil pump, hydraulic oil pump, oil centrifugal gear oil pump -Hand: operated -with: return to the tank -Number: 2x pumps available -Price: per piece -Dimensions: 580/590/H1005 mm -Weight: 70 kg/piece

Weibert Shaper fence NEW! Precision Shaper fence for cutting tool to Max D = 180 mm with fine adjustment The locking bolt hole spacing: 330 mm Diameter extraction: 120 mm with Multieinstellsystem with safety rulers: L = 500 mm, 155 mm high

Trumpf TKF 103 welding edge shaper. 220 Volt under electricity ready for use Special price

DOUBLE AUTOMATIC TEMPLATE SHAPER MACHINE Type BALESTRINI C70 Max. working width mm. 360 Max. working heigth mm. 120 Feed : from 1 to 8 mt./min. ( automatic or pedal variation ) n.02 Router Shaft diam. mm.30 n.02 Router Shaft motor power Hp 5,5 each one n.01 Hydraulic advance variable spped motor power Hp 1 net weight : kgs. 1000

COPY SHAPER machine Type BALESTRINI C70N Max. working width mm. 360 Max. working heigth mm. 90 Feed : from 1 to 8 mt./min. ( automatic or pedal variation ) n.02 Router Shaft diam. mm.30 n.02 Router Shaft motor power Hp 5,5 each one n.01 Hydraulic advance variable speed motor net weight : kgs. 1100

SECOND-HAND LINEAR COPYING SHAPER BACCI MOD. FC8 2500 - Unit 1-2: milling units - Unit 3-4 milling units - Unit 5-6: sanding units - Unit 7-8: sanding units - Working height mm. 180 - Max. working length mm. 2500 - 8 locking cylinders -Cabin - S/N 1481 - CE year 2000

We sell a rectangular air duct lock shaper. In good shape. Length 6000.0 Width 1000.0 Height 1500.0 Weight 1000.0 Advanced information Working length 2500.0 Max thickness 1.0 Motor power 3.0

Description: • Copy shaper machine • Serial number 7087 • Maximum working length approx. 1800 mm • Maximum workpiece widt approx. 330 mm • Maximum working height approx. 160 mm • Clamping table for milling templates • 4 pneumatic clamps • 1 x milling unit (right-left), power 5.50 KW each motor • Hydraulic unit motor 4 KW Approx. Onsite Dimension. (l x w x h): 3,950 x 2,300 x 1,850 mm, weight approx.: 3,500 kg

SECOND-HAND PROFILE SHAPER AND SANDER BALESTRINI CP8/HSC - CE RULES - positions 1-2 milling units - positions 3-4 milling units - positions 5-6 sanding units - positions 7-8 sanding units - positions 9-10 trasversal sanding units - working length mm. 2500 - working height mm. 180 - n. 10 pneumatic locking cylinders - SN 0 133 H2 - CE rules (year 2001)

SECOND-HAND 6 HEADS LINEAR COPYING SHAPER AND SANDER BACCI MOD. FC6 2500 – CE RULES - units 1-2 milling units - units 3-4 sanding units - units 5-6 sanding units - working length mm. 2500 - working height mm. 180 - n. 8 locking cylinders - cabin (4 sides + roof) - year 1999

Length: 0 mm Module: 0 mm Width: 0 mm CNC Brand: 0 CNC Model: 0 Operating hours: 49903 Technical data Working range: Module from up to: 8 Toothed racks: Max. length to be shaped: 1850 mm Max. width to be shaped: 160 mm Table surface: Length: 2200 mm Width: 360 mm Max. ram stroke: 180 mm Distance ram to table: from: 55 mm up to: 280 mm Taper in ram: 50 ISO Ram stroke speeds: number (steps): 12 from: 26 s/min up to: 237 s/min Voltage 50 Hz 3x: 380 Volt Drive: 8.76 kW Machine´s weight about: 7100 kg Overall dimensions machine: Length: 5200 mm Width: 2300 mm Height: 2340 mm Description: gears are missing

ully automatic wood copy milling machine make REICHENBACHER type KS225Make -No: 1182, year of construction 10/1994 with Siemens OP 393 III controlSimultaneously mills and grinds two small parts with complicated shapes, such as tobacco pipes, golf club heads, sports pistol grips, wooden shift levers, etc.Technical specifications:machine constructionStable frame construction in a closed, against dust andNoise-encapsulated housing. Upper area of the front with gas pressure springHinged door, with security window.machine equipmentTo craft 2 copies of a model at once, you have:2 milling spindles each with a milling head dia. 240 mm (equipped with HS steels), via flat belts jointly driven by motor 2.2 kW; number of milling spindles 7200 rpm; Direction of rotation right.2 grinding units each with a 120 mm wide endless grinding belt, together with a 0.75 kW motor driven; belt speed 13 m/s; wi ...

Combined wood milling machine with crosscut saw make STEHLE type FC 3 BMasch. -No: 12761 Year of construction Nov. 1966Table height: 855 mm4 milling spindle speeds: 3000/6000/5000/10000 rpm.Milling diameter: 30 mmSpindle cone: MK 5Height adjustment of the milling shaft: 115 mmSaw blade diameter: 350 mmSaw blade hole: 30 mmGreen cutting height: 110 mmSaw blade speed: 2800 rpm.Drive power: 3/4 / 2.2 kWDimensions L x W x H: 1910 x 1950 x 1200 mmWeight approx: 880 kgWith- Swing arm roller table 1040 x 460 mm- Footbrake double-sidedused, despite the year of construction in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Model construction - milling machine make ZIMMERMANN type FZ 1Year of construction 1987for model and mold making, for wood and light metalTechnical specifications:Longitudinal travel X: 420 mmCross travel Y:4 20 mmVertical travel Z: 400 / 600 mmMachine table (foot): 630 x 490 mmAttachment milling table: 490 x 400 mmRound table movement: 360°Projection: 400 mm8 spindle speeds: 560 - 14000 rpm.Spindle mount: ISA 30Drive power: 1.1 kWPower connection: 380 V / 50 HzWeight approx.: 500 kgExternal dimensions approx.: 1000 x 1000 x 1300 mmwith- rotating top table- several tool holders ISA 30- 3-axis digital readout Mitutoyo- Rolling drawer cabinet- tilting head- 6 milling arbors- Angle milling headused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pl ...

milling machine make SCHNNEIDER type SK 2/3Year of construction 1980 with electric roll feedTechnical specifications:MILLING MACHINE:Milling spindle diameter: 30 mmMax. Clamping height: 150 mmSpindle speeds: 3000/6000, 4000/8000: and 5000/10000 rpmMotor power milling motor: 3.0 / 4.0 kWTable opening diameter: 400 mmMilling fence rotatable: 360 °Working height: 880 mmROLLING TABLE:Roller table working path: 1300 mmTable size: 1070 x 910 mmRoller table size: 1150 x 300 mmSpace requirementwith roller table: 1900 x 1300 mmWeight approx: 820 kgWith- hemming head- Set of thrust rings- knife set- Milling head for handrail- Groove milling head- roll feedused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always av ...

Length: 0 mm Module: 0 mm Width: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Working range: Module from: 0.5 up to: 6 Max. wheel diameter: 400 mm Max. gear cutting width: 70 mm Max. gear cutting diameter: 400 mm Min. ram stroke: 0 mm Max. ram stroke: 82 mm Adjustment of stroke position: 100 mm Distance ram to table: from: 265 mm up to: 365 mm Taper in ram: 5 MT Ram stroke speeds: from: 118 s/min up to: 1000 s/min Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 6300 kg Overall dimensions machine: Length: 2570 mm Width: 1320 mm Height: 2200 mm

Length: 0 mm Module: 10 mm Width: 0 mm MAAG - SH-75 Gear Shaping Machine Ø 750 x Modul 10 MACH - ID 6277 Make: MAAG Type: SH-75 Table Ø   500 mm Max. workpiece    750 Ø Modul     10 mm Working speed       23,5 - 150 mm Dimensions Length  2.100 mm Width   1.700 mm Height   2.100 mm Weight   4.800 kg

Diameter: 500 mm Module: 6 mm Axial travel: 0 mm MACH-id    5215 MAKE        TOS CZ TYPE          OHO 50 YOP SPECIFICATIONS External workpiece Ø Max. 500 Ø  Max. Modul Max.     6 Weight approx.     100 Kg Max. Workpiece height      125 mm Speeds / ranges      355 Rpm Power      4 kW DIMENSIONS Length       2000 mm Width        1000 mm Height      2000 mm

Wood Milling Machine Fabr. MARTIN Type T 21 AVMachine -No: 71662 Year 1969Speeds: 3000/4500/6000/9000 rpm.Voltage: 380Vpole-changing motor: 6.4 / 7.8 hpMotor protection switch: 2With- Feed device- Sliding table with 1270 mm working distanceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Vertical wood milling machine (router) make SCM type T 120 CMachine -No: 1170480, built in 1980Table size: 1100 x 900 mmTable height: 850 mmvertical adjustment of the spindle: 185 mmSpindle diameter: 35 mm5 spindle speeds: 2900 - 10000 rpm.Max. Diameter of tenon cutting disc up to: 400 mmDrive power: 7.5 hpWeight approx.: 610 kgOutside dimensions approx. 1120 x 900 x 850 mmWith- mot. Roll feedused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Notching machine make ROTOX type SAF 164Machine -No: 164-839 built in 1985Technical specifications:machinable profile width: 50 - 300 mm 90 °machinable profile height: 50 - 180 mmMilling hole: 40 mmDrive power: 2.2 kWWith- Miter guide with 1 ° scale and gridused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

KRAFTFORMER ECKOLD KF 324 New machine / year of manufacture 2023 Max. formable sheet thickness -Steel 2mm cze9bpvjhk -Aluminum 2.5mm -Stainless steel 1.5mm -Projection / horizontal 340mm -Projection / vertical 245mm -Plunger adjustment / 32mm via handwheel -Drive / electric motor -Continuous stroke -Incl. 4 sets of tools Dimensions: LxWxH approx. 1250x800x1750mm Weight approx. 470 Kg

KLOPP high-performance high-speed planer with friction drive type 450 Little used, in very good condition. Complete with documentation, accessories and tools Includes closet full of tools. Shipping available for an extra charge Pallet 1: 170 x 130 x 160 cm, 1072 Kg Pallet 2: 120 x 80 x 140 cm, 320 Kg Value Added Tax (VAT) Net price : 2.700,00 Euro For further questions or pictures, we can also be reached via Whatsapp at 00491743357243.

Shaper cutters from Module 1 to Module 14 available: - different no. of teeth, different pressure anles, different profiles, bores and sizes! shaft cutters Module 1-3 = 150 Euro, 4-5 = 250 Euro, >5 = 300 Euro disc cutters Module 1-3 = 150 Euro, 4-6 = 200 Euro, 7-10 = 250 Euro, 10-14 = 300 Euro. complete list on request! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Slotting machine, slotting machine, quick planer, keyseating machine, slotting machine, slotting machine, slotting tool, broaching machine, slotting machine, horizontal slotting machine, planing machine, schepping -Manufacturer: Elliott, horizontal shaping machine type 24M SHAPER -Stroke: 610mm -Stroke rate: 8 - 74 1/min -Clamping table: 580 x 330 mm -Travel: X/Y/Z 375/755/292 mm -T-Slot: 20mm -Drive: 3.7 kW -Dimensions: 2080/1120/H1550 mm -Weight: 1520 kg

machine 1: Fixed side at the left, working width 220 mm to 2500 mm Workpiece overhang max. 110 mm Electronic width adjustment Panel thickness 8 - 90 mm Top pressure by belts Rolling chain with automatic lubrication, automatic pop-up dogs every 1000 mm Feed speed 10 - 40 m/min Chain infeed taking 1,62 m. panels in front of the dogs Panel alignment at the infeed Middle support NC 30 controlls Equipment left and right: 1+1 Jump universal shaper 6 kW 1+1 Twin hogging unit, motors 6,6 kW (2 motors) 1+1 Universal shaper 6 kW 1+1 Jump universal shaper 6 kW panel turning device HOMAG TD 31/30/13 Year 1989 machine 2: Fixed side at the left, working width 220 mm to 3000 mm Workpiece overhang max. 110 mm Electronic width adjustment Panel thickness 8 - 90 mm Top pressure by belts Rolling chain with automatic lubrication, automatic pop-up dogs every 1000 mm Feed speed 8 - 40 m/min Chain infeed taking ...

max. wheel diameter: 150 mm gear width: 42 mm max. module: 3 min. module: 0,5 total power requirement: 10 kW weight of the machine ca.: 6 t External gears, max. Ø 150 mm (or more) Internal gears, max workpiece Ø, approx. 280 mm Gear width, max. 42 mm Module, max. 0.5 - 3 Length of stroke 0 - 50 mm Adjustment of stroke 0 - 70 mm Distance between shaper spindle and body of machine 250 mm Spindle internal table, approx. 45 mm Strokes, roughing / finishing 450 - 1,250 / 2,500 / min Table Ø 250 mm Table bore 100 mm Distance between table and shaper head, approx. 320 mm Axial travel of workpiece slide, approx. 285 mm Feed range, tooth depth 0.01 - 0.063 mm/stroke Rotary feed 0.125 - 3,150 mm/stroke Total electrical load, approx. 10 kW - 380 V - 50 Hz Weight 6,000 kg Accessories / Special Features Built-in hydrostatic straight guide. Built-in raiser plate for raising the shaper head 130 m ...

4-side squaring and edge banding line Machine 1: Fixed side right, moving side left Rolling chain, feed 10 - 40 m/min Controlls NC 21 Panel thickness 8 - 60 mm Max. panel width 1500 mm Edges: coil 0,3 - 3 mm, strips 0,4 - 20 mm Entry fence for veneered panels Equipment: 1+1 Compact-twin hogger, 2 motors 6,6 kW 1+1 Compact hot melt unit A20 with panel edge pre-heating, glue roller Q34, twin coil magazine, lateral pressure rollers C including anti-stick application 1+1 Free space for solid wood edges up to 2,54 m length 1+1 Rough trimming, 2 x 1,5 kW 1+1 Fine- or radius trimming, 2 x 0,4 kW (edges up to 6 mm) 1+1 Universal shaper 8,1 kW 1+1 Universal shaper 8,1 kW 1+1 Edge sander KS 10 1+1 Disc sander DS 40 1+1 Disc sander DS 40 Angular transfer to the right, TWR 24/30/12/S Panel sizes: width 250 - 1200 mm, length 250 - 3000 mm, thickness 8 - 45 mm Machine 2 Machine II + infeed magazine TW ...

max. wheel diameter: 400 mm gear width: 75 mm max. module: 0,5 min. module: 60 total power requirement: 25 kW weight of the machine ca.: 7 t dimensions of the machine ca.: m L O R E N Z (Germany) High Performance Automatic Gear Shaper Model LS 400 Year 1975 Serial No. 12 592 ______________________________________________________________________ ___________ External gear, max. Ø 400 mm (possibly larger) Internal gear dia. 350 mm Gear width, max. 75 mm Module range 0.5 - 6 Length of stroke 82 mm Adjustment of stroke position 0 - 100 mm Distance between shaper spindle and machine body 250 mm Spindle taper MK 5 No. of strokes, roughing/finishing process 118 - 1,000 per min Table size 400 mm Table bore 125 mm Mounting height between table and shaper head 190 / 290 mm Axial travel of tool slide, approx. 295 mm No. of teeth, approx. 12 ...

width 3200 mm Panel feed by chains, chain width 80 mm Feed speed max ? m/min, 4 kW Dogs every 11 cm. Equipment: 1+1 Jump scorer 1+1 Hogger 1+1 Jump shaper 1+1 Jump shaper 1+1 Jump shaper 1+1 Jump shaper

AUTOMATIC COPY SHAPER machine type BALESTRINI CP 4 second hand machine Technical Details : machine composed by 4 units : 2+2 shaper units max. working useful length mm.2500 max. working width mm. 500 max. working heigth mm. 180 speed rotation shaper units 8500 rpm speed rotation sanding units 3500 rpm hydraulic pump motor power Hp 5,5 net weigth kgs. 3300 Volt. 380/50

COPY SHAPER machine PADE UINZE 2300 2T second hand machine machine for simultaneously shaping both sides of the treated piece of wood. the machine is suitable for the production of chairs, tables, beds, armchairs and furniture elements in general. technical details : machine composed by 2 units : 1+1 shaper units . motor power Hp 5,5 each one max. working useful length mm.2500 max. working width mm. 360 max. working heigth mm. 160 speed rotation shaper units rpm 8500 hydraulic carriage forward speed mt./min. 0 / 25 hydraulic carriage return speed mt./min. 40 hydraulic pump motor power Hp 5,5 net weigth kgs.2600 volt. 380/50

The geminiNGM is the 5-axis CNC grinding machine for the serial production of cutting tools. Complete processing around OD and face, up to 300 mm cutting length, diameter up to 300 mm, maximum workpiece length that can be clamped 500 mm. Cutting tools such as end mills, ball nose cutters for mold making, high-performance drills, reamers and profile end mills are all part of the standard requirement. There are specific software packages, grinding processes and clamping systems for the production of shaper cutters with highly dynamic segmented hob grinding, the regrinding of gear cutting tools, end mills, shaper cutters and bevel gear cutters. CNC grinding of knives for the paper, foodstuffs and plastics industries, profile grinding, cylindrical grinding and surface grinding. Numerous accessories for the application spectrum and for increased productivity The machine is in g ...

SECOND-HAND SEMI-AUTOMATIC FINGER JOINT CKM - ASSEMBLE PRESS FA-07CE max. prodcut lenght 4800 mm. range of workpiece heigth 15-60 mm range of workpiece width 15-160 mm motor 5 Hp overall dimensions mm. 7140x1065x1550 mm. - FG-01CE GLUEING UNIT - FD-05 WORKPIECE REST TABLE - F-C58 SEMI AUTOMATIC FINGER SHAPER max. available width working table 450 mm range of workpiece length 115-1000 mm. range of workpiece height 25-160 mm trim saw motor 5 Hp shaper cutter motor 15 Hp

Precision Shaper fence for cutting tool to Max D = 250 mm with fine adjustment The locking bolt hole spacing: 330 mm Diameter extraction: 120 mm with Multieinstellsystem with safety rulers: L = 500 mm, 155 mm high

BALLISTRINE- linear profiler,/shaper-double sided 10 hp cutter head per side- follows your templates - shapes both sides- 9' table- hydraulic feed- material hold downs- $7,800

GEA UM600 dumpling roller All stainless steel Bottler for meatballs Laize 600 mm To form 6 to ± 80g dumplings Suitable for online with a shaper (VM 400) Adjustable speed Mobile Dimensions (L x l x h): ± 1,300 x 700 x 1,500 mm

Weibert WJ-F50 Table milling machine NEW Safety rulers in the shaper fence strongly ribbed cast iron table 1100x900mm electrical height adjustment 200 mm 5.5 KW R + L barrel 3000 to 10000 U/1 Control Panel top Milling spindle can be exchanged Tool - diameter When profiling 275mm at the tenoning 400 m stable role statement WJ-600600 K 4 Special price:

It sells machine revealing pieces of meat of the brand MAJA, model EVM 3002. Built in stainless steel in its entirety. Used equipment completely revised, with guarantee and in prefect condition. Characteristics: cutting width 440 mm, external measurements of the machine 830 mm wide x 620 mm deep x 1000 mm high, working height 960mm. Average speed 30m/min, air pressure 6bar/10bar, weight 180kg, voltage 400v 50Hz, three-phase, 2.2 A, 0.75 Kw. Meat shaper , bark peeler, meat peeler, fish peeler, cephalopod peeler. Practically new re-release team. Reviewed and guaranteed. NEGOTIABLE PRICE, transport costs on behalf of the buyer. If you need any information, more photos, videos and do any kind of test in our exhibition pavilion. Contact by phone, one of our experts will gladly assist you in a personalized way and make you the best offer. If you are really interested in the team, call us at ou ...

AUTOMATIC COPY SHAPER machine BALESTRINI CP 6 second hand machine Machine for the simultaneous milling of elements of chairs, tables or other items by copying a template composed by 6 working units : 1+1 shaping units . motor power Hp 7,5 1+1 shaping units . motor power Hp 5,5 1+1 shaping units . motor power Hp 6 / 4,5 max. working width mm. 300 max. working heigth mm.180 hydraulic carriage max. working length mm. 2500 hydraulic pump motor Hp 5,5 volt. 380/50

AUTOMATIC COPY SHAPER machine type BALESTRINI JUNIOR second hand machine conditions : Excellent, machine like new CE mark : YES with tools : YES with safety protections and instruction booklet machine composed by n. 02 working units max. working length mm. 1400 max. working height mm. 180 max. working width mm. 500 tools rotation speed rpm 8400 feed speed of carriage : from 0,5 to 15 mt/min retun feed speed carriage mt.min. 70 spindle motors power Hp 10 x 2 hydraulic pump motor power Hp 4 volt. 380/50

BALLISTRINE- C 70 N- auto feed thru (2) sided shaper(2) 10HP; 3PH spindle motors • (2) 30mm diameter spindles with 5in. under the nut • Spring loaded floating spindles • In-feed and out-feed rubber covered upper feed rollers • Working width 14.4in. (360mm) max • Working height 4.8in. (120mm) max • Min working length 9.6in. (240mm) • Spindle 8,000 RPM • feed 3 to28..Price-$8,900

Welding edge shaper Offer number: 20122 Make: TRUMPF Type: TKF 104 - 0 Machine Number: 4522206 Built: ca.2006 Technical data: min. / max. material thickness 3 - 25.0 mm Bevel angle Standard 30 - 37.5 - 45 max. bevel length steel 400N/mm2 11 mm max. bevel length steel 600N/mm2 9 mm max. bevel length steel 800N/mm2 6 mm smallest inner radius 50 mm smallest pipe inner diameter 80 mm Working speeds 2.5 m/min Stroke number 400 rpm Drive 400 V / 2000 Watt Space requirement approx. W 550 x D 200 x H 300 mm Weight approx. 13 kg

Welding edge shaper Offer number: 20120 Make: TRUMPF Type: TKF 103 Machine Number: 454106 Built: ca.1992 Technical data: min. / max. material thickness 3 - 25.0 mm max. bevel length steel 400N/mm2 10 mm max. bevel length steel 600N/mm2 8 mm max. bevel length steel 800N/mm2 5 mm Working speed approx. 2.5 m/min Stroke number 400 rpm Drive 400 V / 2000 Watt Space requirement approx. W 550 x D 200 x H 300 mm Weight approx. 13 kg

x-travel: NA mm y-travel: NA mm workpiece height: mm stroke length max.: 450 mm table length: 450 mm table width: 350 mm total power requirement: 1,7 kW weight of the machine ca.: t dimensions of the machine ca.: m Shaper, horizontal,mechanic,vice hydraulic The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Copy Shaper / Copy Lathe Brand: Geiger Model: 8CD Milling + Grinding Workpiece length max. 1500mm

Inv. Num. : 6283 Type: Producer: Generated: 2000 Parameters: The line consists of: 2x shape lines (force shaper. 2x unwinding reel and automatic scissors at the end) 1x edge banding machine (corner shelf) automatic calculator for finished corners)