shaft used for sale

Worm gear TH. ZÜRRER AG Type 2/1KG i = 100 input: coupling for shaft diameter: Ø 24 mm, shaft length: 30 mm flange: Ø 105 / 60 mm bolt circle diameter: Ø 85 mm, 4x bore: Ø 7 mm output: shaft diameter: Ø 19 mm, shaft length: 38 mm, groove width: 6 mm flange: Ø 120 / 80 mm bolt circle diameter: Ø 100 mm, 4x bore: Ø 7 mm gear foot: 90 x 90 mm hole spacing: 68 / 70 mm, 4x threaded hole: M6 x 1.0, depth: 15 mm material (housing): Cast iron New ! Dimensions: 195 x 185 x 165 mm

Press-fit device for ceramic pins in rotor shafts Principle: The ceramic pins are fed to a test station via a pneumatic hose by means of a vibrating conveying bowl, where the position of any single-sided bore is checked. This is done with an optical sensor. Wrongly positioned parts are conveyed through a pneumatic slide into a collection container. Pins that are correctly positioned are fed through another pneumatic hose to the separator of the press-fit tool. The actual press-fit process is also carried out pneumatically with a roller bearing guided punch. First, a manually adjustable pressure p1 is used to check that the pin is not pressed too easily into the shaft. With a pressure p2, which can also be adjusted manually, the pin is then pressed into the rotor shaft at full stop. A 5,000 N preloaded disc spring package prevents excessive force from being exerted on  ...

Working width: 520 mm; Planing shaft: tersa; Number of knives: 4; Dressing table length: 2720 mm; Dressing table adjustment: lever; Hollow and pointed joint adjustment: no; Display Spahnabnahme: Scala; Hollow and pointed joint display: -; Dressing stop angle adjustable: yes; Engine power: 7 kW; Machine length: 2800 mm; Machine width: 1000mm; Weight: 870 kg; Large dressing tables made of cast iron The dressing table is adjusted by means of a precise parallelogram system, so that the distance between the table tips and the knife shaft remains the same in every adjustment position The large, stable dressing stop made of anodized aluminum is easily movable and can be tilted from 0Â - 45Â The inclination of the stop can be read from the workstation Standard with auxiliary stop Large four-knife shaft, precision-bearing Smooth running thanks to the precision unit and thanks to t ...

Gear motor VEM ZG3 KMRB 80 G 4 ( ZG3KMRB80G4 ) 1,5 kW 40 rpm 220 / 380 V 3AC IP54 Shaft diameter: Ø 48 mm Shaft length: 110 mm Groove width: 14 mm Motor base: 203 x 245 / 250 mm hole spacing ( parallel to the shaft ): 150 mm hole spacing ( transverse to the shaft ): 205 mm hole diameter: Ø 18 mm Gearbox size is incorrectly indicated on the nameplate ! used, checked ! Dimensions: 590 x 250 x 270 mm

Gear motor VEM ZG4 KMRB 100 S 4 ( ZG4KMRB100S4 ) 3,0 kW 40 rpm 220 / 380 V 3AC IP54 shaft diameter: Ø 60 mm shaft length: 140 mm groove width: 18 mm motor base: 255 x 300 / 310 mm hole spacing (parallel to the shaft): 95 / 95 mm hole spacing ( transverse to shaft ): 255 mm hole diameter: Ø 18 mm New ! Dimensions: 735 x 310 x 325 mm

Gear motor VEM ZG4 KMRB 132 M 4 ( ZG4KMRB132M4 ) 11,0 kW 250 rpm 220 / 380 V 3AC IP44 Shaft diameter: Ø 60 mm Shaft length: 140 mm Groove width: 18 mm Motor base: 255 x 300 / 310 mm hole spacing ( parallel to the shaft ): 95 / 95 mm hole spacing ( transverse to the shaft ): 255 mm hole diameter: Ø 18 mm used, tested ! Dimensions: 735 x 310 x 325 mm

Gear motor VEM ZG4 KMR 90 L 4-8 ( ZG4KMR90L4-8 ) 1,1,0 / 0.5 kW 31.5 / 16 rpm 380 V 3AC IP44 shaft diameter: Ø 60 mm shaft length: 140 mm groove width: 18 mm motor base: 254 x 300 / 310 mm hole spacing (parallel to shaft): 95 / 95 mm hole spacing ( transverse to the shaft ): 255 mm hole diameter: Ø 18 mm used, tested ! Dimensions: 740 x 310 x 320 mm

Gear motor VEM ZG4 KMR 132 M 4 ( ZG4KMR1132M4 ) 11,0 kW approx. 125 rpm ( counted ) 500 V 3AC IP44 Shaft diameter: Ø 60 mm shaft length: 140 mm groove width: 18 mm motor base: 255 x 300 / 310 mm hole spacing ( parallel to the shaft ): 95 / 95 mm hole spacing ( transverse to the shaft ): 255 mm hole diameter: Ø 18 mm used, tested ! Dimensions: 870 x 310 x 390 mm

Gear motor VEM ZG4 KMRB 100 S 6 ( ZG4KMRB100S4 ) 3,0 kW 40 rpm 500 V 3AC IP54 shaft diameter: Ø 60 mm shaft length: 140 mm groove width: 18 mm Motor base: 255 x 300 / 310 mm hole spacing (parallel to the shaft): 95 / 95 mm hole spacing ( transverse to the shaft ): 255 mm hole diameter: Ø 18 mm used, tested ! Dimensions: 735 x 310 x 330 mm

Gear motor VEM ZG4 KMRA 100 S 4 ( ZG4KMRA100S4 ) 3,0 kW 40 rpm 220 / 380 V 3AC IP44 shaft diameter: Ø 60 mm shaft length: 140 mm groove width: 18 mm motor base: 255 x 300 / 310 mm hole spacing (parallel to shaft): 95 / 95 mm hole spacing ( transverse to the shaft ): 255 mm hole diameter: Ø 18 mm used, tested ! Dimensions: 735 x 310 x 330 mm

Gear motor VEM ZG3 KMRB 80 G 6 ( ZG3KMRB80G6 ) 1,1 kW 25 rpm 220 / 380 V 3AC IP44 Shaft diameter: Ø 48 mm Shaft length: 110 mm groove width: 14 mm Motor base: 203 x 245 / 250 mm hole spacing (parallel to the shaft): 150 mm hole spacing ( transverse to the shaft ): 205 mm hole diameter: Ø 18 mm New ! Dimensions: 600 x 250 x 265 mm

Gear motor VEM ZG0 KMRB 71 G 4 ( ZG0KMRB71G4 ) 0,75 kW 250 rpm 220 / 380 V 3AC IP54 shaft diameter: Ø 22 mm shaft length: 50 mm groove width: 6 mm motor base: 118 x 155 / 158 mm hole spacing (parallel to the shaft): 95 mm hole spacing ( transverse to the shaft ): 130 mm hole diameter: Ø 9 mm used, tested ! Dimensions: 400 x 158 x 210 mm

Gear motor VEM ZG2 KMRB 80 K8 ( ZG2KMRB80K8 ) 0,37 kW 16 rpm 220 / 380 V 3AC IP54 shaft diameter: Ø 32 mm shaft length: 80 mm groove width: 10 mm Motor base: 165 x 205 / 210 mm hole spacing (parallel to the shaft): 120 mm hole spacing ( transverse to shaft ): 170 mm hole diameter: Ø 14 mm New ! Dimensions: 500 x 210 x 245 mm

Gear motor with brake VEM ZG2 BMRE 71 K 4 ( ZG2BMRE71K4 ) 0,55 kW 31.5 rpm 220 / 380 V 3AC IP44 shaft diameter: Ø 32 mm shaft length: 80 mm groove width: 10 mm motor foot: 165 x 205 / 210 mm hole spacing ( parallel to the shaft ): 120 mm hole spacing ( transverse to the shaft ): 170 mm hole diameter: Ø 14 mm used, tested ! Dimensions: 520 x 210 x 235 mm

Gear motor VEM ZG3 KMRB 80 K 4 ( ZG3KMRB80K4 ) 1,1 kW 40 rpm 220 / 380 V 3AC IP54 shaft diameter: Ø 48 mm shaft length: 110 mm groove width: 14 mm motor base: 203 x 245 / 250 mm hole spacing (parallel to the shaft): 150 mm hole spacing ( transverse to shaft ): 205 mm hole diameter: Ø 18 mm used, tested ! Dimensions: 575 x 250 x 270 mm

Gear motor VEM ZG2 KMRa 80 K8 ( ZG2KMRa80K8 ) 0,37 kW 16 rpm 220 / 380 V 3AC IP44 shaft diameter: Ø 32 mm shaft length: 80 mm groove width: 10 mm motor base: 165 x 205 / 210 mm hole spacing (parallel to the shaft): 120 mm hole spacing ( transverse to shaft ): 170 mm hole diameter: Ø 14 mm New ! Dimensions: 500 x 210 x 245 mm

Gear motor VEM, HEINZ DÖHLER ELEKTROMOTOREN Burg ZG5 KMR 112 M 6 ( ZG5KMR112M6 ) 1,1,9 kW 16 rpm 380 V 3AC Shaft diameter: Ø 75 mm Shaft length: 140 mm Groove width: 20 mm Motor foot: 310 x 370 / 375 mm hole spacing ( parallel to the shaft ): 122.5 / 122.5 mm hole spacing ( transverse to the shaft ): 315 mm hole diameter: Ø 22.5 mm used, tested ! Dimensions: 950 x 375 x 420 mm

Gear motor with brake BAUER G062-20/D0 44-141 L B S ( G062-20/D044-141LBS ) 0,11 kW 27 rpm 32 V 3AC IP54 / 65 shaft diameter: Ø 17 mm shaft length: 30 mm groove width: 5 mm Gear foot: 75 x 115 mm hole spacing ( parallel to the shaft ): 40 mm hole spacing ( transverse to the shaft ): 94 mm hole diameter: Ø 10 mm used, tested ! Dimensions: 320 x 150 x 145 mm

Getriebemotor GETRIEBEBAU NORD Type: SK 2282AFSH/VL-90 S/4 ( SK2282AFSH/VL-90S/4 ) 1,1 kW 225 rpm Motor: SK90S/4 1.1 kW 1395 rpm 230 / 400 volts 3AC 50 Hz IP 55 hollow shaft diameter: Ø 35 mm hollow shaft length: 195 mm shaft diameter: Ø 50 / 46 mm shaft length: 20 / 44 mm with shrink disc Flange diameter: Ø 250 / 180 mm bolt circle diameter: Ø 215 mm hole diameter: Ø 14 mm New ! Dimensions: 470 x 375 x 260 mm

Getriebemotor GETRIEBEBAU NORD Type: SK 2282AFSH/VL-90 S/4 ( SK2282AFSH/VL-90S/4 ) 1,1 kW 217 rpm motor: SK90S/4 1.1 kW 1395 rpm 230 / 400 volts 3AC 50 Hz IP 55 hollow shaft diameter: Ø 35 mm hollow shaft length: 195 mm shaft diameter: Ø 50 / 46 mm shaft length: 20 / 44 mm with receptacle for shrink disc Flange diameter: Ø 250 / 180 mm bolt circle diameter: Ø 215 mm hole diameter: Ø 14 mm new ! Dimensions: 470 x 375 x 260 mm

Getriebemotor GETRIEBEBAU NORD Type: SK 2282AFSH/VL-90 S/2 ( SK2282AFSH/VL-90S/2 ) 1,1 kW 426 rpm motor: SK90S/4 1.1 kW 1395 rpm 230 / 400 volts 3AC 50 Hz IP 55 hollow shaft diameter: Ø 35 mm hollow shaft length: 195 mm shaft diameter: Ø 50 / 46 mm shaft length: 20 / 44 mm with receptacle for shrink disc Flange diameter: Ø 250 / 180 mm bolt circle diameter: Ø 215 mm hole diameter: Ø 14 mm used, tested ! Dimensions: 470 x 375 x 260 mm

Gear motor LENZE Type: GKS04-3M SAR 090-11 ( GKS04-3MSAR090-11 ) 1,5 kW 242.1 rpm Engine: MDEMAXX 090-11 1.5 kW 2840 rpm 230 / 400 Volt 3AC 50 Hz IP 55 Hollow shaft diameter: Ø 25 mm Hollow shaft length: 145 mm holder for shrink disc: Shaft diameter: Ø 36 mm, shaft length: 24 mm Flange diameter: Ø 105 / 75 mm bolt circle diameter: Ø 88 mm 6x threaded hole: M6 x 1.0, depth: 15 mm used, tested ! Dimensions: 470 x 230 x 180 mm

Getriebemotor GETRIEBEBAU NORD Type: SK 3282AFSH/VL-100 L/2 ( SK3282AFSH/VL-100L/2 ) 3,0 kW 422 rpm engine: SK100L/2 3.0 kW 2860 rpm 400 / 690 volts 3AC 50 Hz IP 55 hollow shaft diameter: Ø 40 mm hollow shaft length: 300 mm holder for shrink disc: shaft diameter: Ø 55 mm, shaft length: 55 mm with shrink disc flange diameter: Ø 300 / 230 mm bolt circle diameter: Ø 265 mm hole diameter: Ø 14 mm used, tested ! Dimensions: 560 x 440 x 300 mm

Gear motor VEM ZG0 KMR 63 K 4 ( ZG0KMR63K4 ) 0,25 kW / 0.33 hp ( HP ) 80 rpm 220 / 380 V 3AC IP44 shaft diameter: Ø 19 mm shaft length: 50 mm groove width: 6 mm motor foot: 118 x 155 / 158 mm hole spacing ( parallel to the shaft ): 95 mm hole spacing ( transverse to the shaft ): 130 mm hole diameter: Ø 9 mm used, tested ! Dimensions: 370 x 158 x 210 mm

Gear motor with brake SIEMENS E48-LA71S4-L4NHA 0,25 kW 165 rpm 400 V 3AC 50 Hz IP55 shaft diameter: Ø 24 mm shaft length: 50 mm groove width: 8 mm Gear foot: 170 x 150 mm hole spacing ( parallel to the shaft ): 120 mm hole spacing ( transverse to shaft ): 135 mm hole diameter: Ø 13.5 mm sprocket: Ø 93 x 7 mm, 22 teeth with RUFLEX slipper clutch size 1 used, tested ! Dimensions: 475 x 235 x 270 mm

Gear motor VEM ZG1 KMRB 63 K 4 ( ZG1KMRB63K4 ) 0,25 kW 31.5 rpm 220 / 380 V 3AC IP54 shaft diameter: Ø 28 mm shaft length: 60 mm groove width: 8 mm motor base: 138 x 170 / 175 mm hole spacing (parallel to the shaft): 95 mm hole spacing ( transverse to the shaft ): 140 mm hole diameter: Ø 12 mm New ! Dimensions: 405 x 175 x 215 mm

Gear motor VEM ZG2 KMR 71 G 4 ( ZG2KMR71G4 ) 0,75 kW 31.5 rpm 220 / 380 V 3AC IP44 shaft diameter: Ø 32 mm shaft length: 80 mm groove width: 10 mm Motor base: 165 x 205 / 210 mm hole spacing (parallel to the shaft): 120 mm hole spacing ( transverse to shaft ): 170 mm hole diameter: Ø 14 mm New ! Dimensions: 480 x 210 x 235 mm

Gear motor VEM ZG2 KMRB 80 K4( ZG2KMRB80K4 ) 1,1 kW 63 rpm 220 / 380 V 3AC IP54 shaft diameter: Ø 32 mm shaft length: 80 mm groove width: 10 mm motor base: 165 x 205 / 210 mm hole spacing (parallel to the shaft): 120 mm hole spacing ( transverse to the shaft ): 170 mm hole diameter: Ø 14 mm used, tested ! Dimensions: 500 x 210 x 245 mm

Getriebemotor GETRIEBEBAU NORD SK 1S50A-71 L/4 ( SK1S50A-71L/4 ) 0,37 kW 29 rpm Gear ratio: 49 2x shaft diameter: Ø 20 / 25 mm, shaft length: 40 / 75 mm groove width: 6 mm Gear foot: 120 x 108 mm hole spacing: 100 / 80 mm 4x bore: Ø 9 mm Engine: SK 71/L4 ( SK71L/4 ) 0,37 kW 1380 rpm 220 / 380 - 420 V 3AC 50 Hz IP55 used, tested ! Dimensions ( without shaft ): 330 x 145 x 230 mm Dimensions ( with shaft ): 330 x 340 x 230 mm

Gear motor SEW R40DT71D4 0,0,37 kW 60 rpm 230 / 400 V 3AC 50 Hz IP54 shaft diameter: Ø 25 mm shaft length: 50 mm groove width: 8 mm Gear foot: 160 x 145 mm hole spacing ( parallel to the shaft ): 130 mm hole spacing ( transverse to the shaft ): 110 mm hole diameter: Ø 9 mm used, tested ! Dimensions: 410 x 150 x 210 mm

Gear motor SEW R703DT71D4TF 0,37 kW 11 rpm 133 / 230 V 3AC 50 Hz IP54 shaft diameter: Ø 40 mm shaft length: 80 mm groove width: 12 mm Gear foot: 245 x 230 mm hole spacing ( parallel to the shaft ): 205 mm hole spacing ( transverse to the shaft ): 170 mm hole diameter: Ø 17.5 mm used, tested ! Dimensions: 490 x 245 x 255 mm

Gear motor VEM ZG5 KPF 112 M 4 / R ( ZG5KPF112M4/R ) 5,5 kW 40 rpm 380 - 420 V 3AC IP54 shaft diameter: Ø 75 mm shaft length: 140 mm groove width: 20 mm motor foot: 310 x 370 / 375 mm hole spacing ( parallel to the shaft ): 122.5 / 122.5 mm hole spacing ( transverse to the shaft ): 315 mm hole diameter: Ø 22 mm used, tested ! Dimensions: 860 x 375 x 430 mm

Gear motor VEM ZG4 KMRB 90 L 6 ( ZG4KMRB90L6 ) 1,5 kW 25 rpm 220 / 380 V 3AC IP44 shaft diameter: Ø 60 mm shaft length: 140 mm groove width: 18 mm motor foot: 255 x 300 / 310 mm hole spacing ( parallel to the shaft ): 95 / 95 mm hole spacing ( transverse to the shaft ): 255 mm hole diameter: Ø 18 mm used, tested ! Dimensions: 700 x 310 x 350 mm

Gear motor VEM ZG4 KMR 90 L 6 ( ZG4KMR90L6 ) 1,5 kW 25 rpm 220 / 380 V 3AC IP54 shaft diameter: Ø 60 mm Shaft length: 140 mm groove width: 18 mm Motor base: 254 x 300 / 310 mm hole spacing (parallel to the shaft): 95 / 95 mm hole spacing ( transverse to shaft ): 255 mm hole diameter: Ø 18 mm New ! Dimensions: 700 x 310 x 320 mm

Gear motor VEM ZG3 KMR 80 K 4 ( ZG3KMR80K4 ) 1,1 kW 40 rpm 220 / 380 V 3AC IP44 shaft diameter: Ø 48 mm shaft length: 110 mm groove width: 14 mm motor base: 203 x 245 / 250 mm hole spacing (parallel to shaft): 150 mm hole spacing ( transverse to the shaft ): 205 mm hole diameter: Ø 18 mm New ! Dimensions: 575 x 250 x 270 mm

Feed gear WMW 1 : 0.66 one revolution of the gear causes 2/3 revolutions of the shaft drive shaft: internal spline shaft profile: diameter: Ø 13 / 17 mm, depth: 75 mm for spline shaft: 4 wedges, width: 8 mm accessories for RUHLA - milling machine used, tested ! Dimensions: 370 x 225 x 220 mm

Feed gear WMW 1 : 3 one revolution of the gear causes 3 revolutions of the shaft drive shaft: internal spline shaft profile: diameter: Ø 13 / 17 mm, depth: 55 mm for spline shaft: 4 wedges, width: 8 mm accessories for RUHLA - milling machine used, tested ! Dimensions: 335 x 260 x 170 mm

Cardan shaft, propeller shaft PAGUS length: approx. 1100 - 1450 mm shaft Ø 63 mm < br /> shaft outside Ø 100 mm flange Ø 148 mm bolt circle Ø 128 mm 6 bores Ø 12 mm New ! Dimensions: 1200 x 150 x 150 mm

Rotary joint, rotational union PFEIFFER VACUUM PC 062 292-U ( PC062292-U ) Flange diameter: Ø 110 x 14.4 mm / Ø 90 x 6.1 mm 2x timing belt wheel: Ø 67 x 13 mm, 43 teeth, distance 5 mm Shaft diameter: Ø 15 mm shaft guidance: Ø 40 x 78 mm flat pulley: Ø 46 x 22 mm shaft diameter: Ø 12 mm shaft guide: Ø 46 x 90 mm material( housing ): stainless steel New ! Dimensions ( bushing ): 285 x 195 x 110 mm Dimensions ( packaging ): 390 x 250 x 190 mm

Rotary union, rotary union PFEIFFER VACUUM PC 062 294-U ( PC062294-U ) Flange diameter: Ø 110 x 15 mm / Ø 40 x 12 mm 2x timing belt wheel: Ø 67 x 13 mm, 43 teeth, distance 5 mm shaft diameter: Ø 15 mm, Shaft length: 38 mm, groove width: 5 mm flat belt wheel: Ø 46 x 22 mm shaft diameter: Ø 12 mm, shaft length: 14 mm, groove width: 4 mm material( housing ): stainless steel New ! Dimensions ( bushing ): 285 x 185 x 110 mm Dimensions ( packaging ): 325 x 230 x 170 mm

mechanical tachometer, with hour display and drive shaft MERTIK Display: 0 - 2400 rpm K: 1.0 Operating hour display: four digits, one decimal place Front panel installation: Ø 80 mm Thread: M18 x 1.5 Drive shaft: length approx. 1.16 m New ! Dimensions ( without mounting bracket and shaft ): 105 x 85 x 85 mm Dimensions ( complete, without shaft ): 105 x 105 x 85 mm Dimensions ( packaging ): 105 x 105 x 85 mm

Cardan shaft, propeller shaft ELBE length: approx. 940 - 1040 mm 150/8-S=935/X=110 0.0.br 117.110.0 shaft Ø 64 mm shaft outside Ø 100 mm flange Ø 150 mm New Dimensions: 950 x 150 x 150 mm

Cardan shaft, propeller shaft PAGUS length: approx. 1100 - 1450 mm shaft Ø 63 mm shaft outside Ø 100 mm flange Ø 200 mm New ! Dimensions: 1100 x 200 x 200 mm

Tube expander, spindle, splined shaft -Splined shaft: mounting shaft O 45 mm -Wedge: outer diameter 40/49/58 mm splined shaft cone adjustable -Dimensions: see techn. Drawing with the photos -Dimensions: O 98 x 370 mm -Weight: 5.5 kg

Gear motor VEM Z5 KR 112,1/4 ( Z5KR112,1/4 ) 3,0 kW 100 rpm 20 / 380 V 3AC IP44 shaft diameter: Ø 60 mm shaft length: 140 mm groove width: 18 mm motor base: 258 x 345 mm hole spacing (parallel to the shaft): 195 mm hole spacing ( transverse to shaft ): 280 mm hole diameter: Ø 17.5 mm New ! Dimensions: 665 x 350 x 410 mm

Three-phase electric motor LEROY SOMER type: L SES160L-T ( LSES160L-T ) 15 kW 1450 rpm 380 V 3AC 50 Hz IP 55 60 Hz - operation is possible ! design: B3 shaft diameter: Ø 42 mm wavelength: 110 mm, groove width: 12 mm pulley: diameter: Ø 146 mm, rim width: 65 mm grooves: 4, groove width: 12 mm motor base: 297 x 294 mm < BR /> Hole spacing ( parallel to shaft ): 44 / 210 mm hole spacing ( transverse to shaft ): 255 mm hole diameter: Ø 14 x 16 mm, slotted hole transverse to the shaft used, tested ! Dimensions: 610 x 310 x 400 mm

Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling, shaft coupling -Shaft coupling for: splined shaft -Shaft: Ø 25/22 mm, Ø 20/17 mm -Price: per piece -Number: 3 pieces -Dimension: Ø 105 x 76 mm -Weight: 1.9 kg/piece

Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling, shaft coupling -Shaft coupling for: splined shaft -Shaft: Ø 40/36 mm, Ø 30/27 mm -Price: per piece -Number: 6 pieces -Dimension: Ø 140 x 105 mm -Weight: 5.8 kg/piece

heavy gear, angular gear -Translation: 1:16 -Drive shaft hollow shaft: 38 mm -Output shaft shaft: 48 mm -with claw coupling: -Number: 1 piece gear available -Price: per piece -Dimensions: 470/240/H445 mm -Weight: 59 kg/piece

Spindle motor, electric motor ISEL AUTOMATION F 5 D 2 S - 018 ( F5D2S018 ) 0,55 kW max. 24000 rpm 200 V 3AC 300 Hz IP54 design: B34K shaft diameter: Ø 15 mm, with ER11 collet chuck and collet Ø 6 mm wavelength: 50 mm wrench width: 13 mm flange diameter: Ø 50 / 80 mm bolt circle diameter: Ø 65 mm 4x threaded hole: M5 x 0.08, depth: 10 mm motor base: 110 x 106 mm hole spacing ( parallel to shaft ): 71 mm hole spacing ( transverse to shaft ): 90 mm hole diameter: Ø 6.5 mm, length: 9 mm ( slotted hole transverse to the shaft ) used, tested ! Dimensions: 245 x 110 x 215 mm