127,530 used machines on RESALE, but how to find them? Machine Search
Tatham Twin shaft paddle mixer Serial: CO1040 Stainless, 1200Kg twin shaft paddle mixer, New motors, new gearbox, new chains, with stainless holding hopper at base
SINGLE SHAFT SHREDDER, 1.000 mm wide rotor, 370 mm diameter, adjustable counter-knife, off-set rotor bearings (low maintenance), V-Rotor with knife pockets, Welded knife holders with screwed knives and covered bold heads, Offset rotor bearings ( low-maintenance / closed ), Fast hydraulic backwards incl. different settings by PLC control and anti shock valve, Shredding room unpainted, Movable screen basket (electro-hydraulically), Screen thickness 10mm, Hydrodynamic starting clutch (energy saving system for machine start), Electromechanical drive with heavy duty gearbox, Control cabinet incl. 5m cable, Electrical control system Siemens S7 PLC control, Reverse counter and transmission limit switch (safety package), Star delta starter, Universal joints for piston with ram impulse and load-related ram function, Machine frame on anti - vibration foundation, Machine prepared for discharge by c ...
SINGLE SHAFT SHREDDER 150 kw (or 180 kw), sturdy structure in electro-welded steel, cutting chamber dimensions mm. 2000x1000, electro-welded sheet metal hopper for top loading, installed power on the rotor 75 + 75 kw optional 90 + 90 kw, hydraulic unit power 11 kw (15 HP), transmission by belts, 1 rotor, rotor diameter 480 mm., rotor length 2000 mm., 122 reversible tools, 4 usable tool sides, 8 upper fixed blades, 8 lower fixed blades, 73 average rotor revolutions/min., weight 13000 kg, production 3500-5000 kg/h, emergency stop, drawer inversion system, supports for bearings with sealing system against dust and liquids, Adjustable steel counterblade, hydraulically operated pusher drawer with 1000 mm of useful stroke, transmission system by means of pulleys and belts, electrical panel according to EEC standards with inverter, SIEMENS main internal board, Power: 150 kw or 180 kw, width: 2. ...
SINGLE SHAFT SHREDDER 75 KW, sturdy structure in electro-welded steel, cutting chamber dimensions mm. 1300x1300, electro-welded sheet metal hopper for top loading, installed power on the rotor 75 kw (100 HP) optional 90 kw (120 HP), hydraulic unit power 5,5 kw (7,5 HP), transmission by belts, 1 rotor, rotor diameter 400 mm., rotor length 1300 mm., 80 reversible tools, 4 usable tool sides, 5 upper fixed blades, 5 lower fixed blades, 73 average rotor revolutions/min., weight 6200 kg, production 2500-3500 kg/h, emergency stop, drawer inversion system, supports for bearings with sealing system against dust and liquids, Adjustable steel counterblade, hydraulically operated pusher drawer with 800 mm of useful stroke, transmission system by means of pulleys and belts, electrical panel according to EEC standards with inverter, SIEMENS main internal board, Power: 75 KW, width: 1.300 mm. 51.18
SINGLE SHAFT SHREDDER 55 KW, sturdy structure in electro-welded steel, cutting chamber dimensions mm. 1100x1300, electro-welded sheet metal hopper for top loading, installed power on the rotor 55 kw (75 HP) optional 75 kw (100 HP), hydraulic unit power 5,5 kw (7,5 HP), transmission by belts, 1 rotor, rotor diameter 400 mm., rotor length 1100 mm., 66 reversible tools, 4 usable tool sides, 4 upper fixed blades, 4 lower fixed blades, 73 average rotor revolutions/min., weight 5500 kg, production 1200-2000 kg/h, emergency stop, drawer inversion system, supports for bearings with sealing system against dust and liquids, Adjustable steel counterblade, hydraulically operated pusher drawer with 800 mm of useful stroke, transmission system by means of pulleys and belts, electrical panel according to EEC standards with inverter, SIEMENS main internal board, Power: 55 kw
DUAL-SHAFT HYDRAULIC SHREDDER, Loading hopper, Sturdy supporting structure in carbon steel, shredding surface 1.300 x 960 mm ca, 2 counter-rotating steel shafts, 75 mm thick knives, 2 hooks, max speed 18 rpm, planetary gearbox, Hydraulic motor 90 kw (120Hp) 400 V/50 Hz (can be fitted with a 75 kw drive), hydraulic power unit,, 400 lt. oil tank, automatic overload reversal with programmable number of reverse cycles, control panel with electronic system to set maximum number of inversions, cooling fan, Complete with electrical drawings, user manual, CE compliance, Possible addition of loading and extraction belt with magnetic separator, width: 1.300mm, availability: 70 days ca, conditions: reconditioned, Power: 90 kw
DUAL-SHAFT HYDRAULIC SHREDDER, shredding surface 1.000 x 850 mm ca, including loading hopper, Sturdy supporting structure in carbon steel, 2 counter-rotating steel shafts, n.20 x 50mm.thick knives (or bespoke), Hydraulic motor 37 kw, 400 V/50 Hz, hydraulic power unit,, 200 lt. oil tank, control panel, automatic overload reversal with programmable number of reverse cycles, Complete with electrical drawings, user manual, CE compliance, Possible addition of loding and extraction belt with magnetic separator, width: 1.000 mm, availability: 150 days ca, conditions: reconditioned, Power: 37 kw, Special Features: Interesting prices for these IT shredders, starting from 135 k€ for a hydraulic machine
SMALL DUAL SHAFT SHREDDER to save on waste disposal, for organic, plastics, light metals, wood, but also PCB, confidential documents, disks, cards from small workshops, canteens, vessels, communities, etc., Small and versatile, can be lodged in a van, along with a small generator to start a profitable door-to-door shredding service., shredding chamber 400 x 350 mm, N. 20 knives 20 mm thick, 2 hooks, n.1 gearbox, N.1 electric motor 5,5 kw (or bespoke), installed power - used power in work: about 60-65% : 5,5 kW (or 3,5 or 7,5 kW), working width: 400 mm., conditions: new machine, type: dual shaft
Key data: 200 mm, 300 , 200
Profile bending roll used equipment hydraulic model AR200 year 2008 make MG Italy Capacity bending chart photo in enclosed -Technical data: Output shafts size 200 mm -Machine complete with set of rollers adjustable for the various shape of profiles. -Traction tool hydraulic operated for the HEB-beam - IPE - UNP bending the hard side. -Lateral correctors left and right side hydraulic operated in 3 direction. -Included additional set of rolls for pipe 6" inches -Machine with 3 rolls driven system with individual hydraulic motor and axial gear-unit on each shaft. -The 3 shafts working on bearings, heavy duty type with sealed lubrication. -Centralized control panel movable on wheels with all electric commands. -Dual rolling speed up to 5 mtr/min with automatic balancing system between the 3 rolls. -Safety devices in compliance with European regulation. CE mark. - ...
Husmann HL I 1222 ES single-shaft crusher: Working speed max. 35 rpm, 28 knives Knife width 100 mm. Outer diameter of shaft 660 mm, shaft length 2,260 mm Cutter opening 1,200 x 2,200 mm Electro-hydraulic drive with 400 bar system pressure Drive power 200 kW Torque 90,000 Nm to 110,000 Nm Throughput capacity 40 t/h Hopper made of highly wear-resistant steel Discharge conveyor belt with magnetic separator and cleaning brush + Günther starscreen: MULTISTAR 2-SE Screen deck: L: 4,000 mm; W: 1,200 mm; centre distance 266.5 mm. sieve section 60...90 mm Drive 2 x 4 kW Throughput capacity 15 t/h Total plant run only 10 operating hours! Year of manufacture 2020 Find more here - /
Self-priming screw spindle pump manufacturer from Allweiler Pump with free shaft end incl. electrical heating, 220 V standard coupling Intermediate lantern in GG, drive motor with PTC thermistor in special design Find more here - / Contact us at -
DUAL SHAFT SHREDDER, n.2x 1.300 mm. long shaft, n.2 x 37 kw motors, control panel, sturdy steel structure, good working conditions, installed power - used power in work: about 60-65% : 74
4-SHAFT SHREDDER 22 KW, sturdy carbon steel electrowelded structure, anti-wear side walls, loading hopper, shredding surface 600 x 800 mm., n.4 x 800 mm long shafts, n.30 anti-wear cutting knives 20 mm thick, n.30 routing disks, n.2 planetary gearboxes, n.2 x 11 kw motors, inversion on overload, n.18 rpm average, bespoke screen size, extraction prepared for connection with blowing system, SIEMENS LOGO PLC with simple panel for complete control, CE compliance, Users manuals.
4-SHAFT SHREDDER 15 KW, sturdy carbon steel electrowelded structure, anti-wear side walls, loading hopper, shredding surface 600 x 800 mm., n.4 x 800 mm long shafts, n.30 anti-wear cutting knives 20 mm thick, n.30 routing disks, n.2 planetary gearboxes, n.2 x 7,5 kw motors, inversion on overload, n.18 rpm average, bespoke screen size, extraction prepared for connection with blowing system, SIEMENS LOGO PLC with simple panel for complete control, CE compliance, Users manuals.
HEAVY DUTY SINGLE SHAFT SHREDDER - multipurpose, Main applications:TYRES - CABLES - WEEE - LIGHT METAL SCRAPS - OIL FILTERS, and other industrial waste, Rotor length: 1,200 mm, Rotor diameter: approx. 500 mm, rotor speed 144 rpm, Cutting chamber opening: 600 x 1.200 mm, 30 rotating blades, 16 fixed blades, Installed power: 1 x 132 Kw IE3 (belt drive), Siemens (PLC and control equipment), Schneider Electric (protections, switches and power supply), Omron (sensors and auxiliary modules), Power supply voltage: 3~ 400 V – 50 Hz, screen holes bespoke to project, Robust structure with interchangeable internal armour plating in wear-resistant steel., High-inertia rotor designed to minimise wear and optimise cutting power., Blades can be resharpened several times, Quick blade and grid replacement system with easy access., Hydraulically opening grid cradle for easy maintenance and grid replacem ...
General SKU312W1493 MakeLaitex LocationBarneveld CEcheck TypeKRK 2-300x1660 Main Features Motor15 KW Width1500 mm Specified Features - Lump breaker MaterialStainless steel 1.4571 (316Ti) Lump breakercheck Double shaftcheck Rotor sizesDia. 300x 1600 mm Teeth height100 mm Inlet1500x560 mm Outlet1500x560 mm Motor7,5 kW, 290-500 volt, 1470 rpm (2x) Rotor speed47 rpm Information No.5235 Year of construction2014 Floorspace3,1x1,7 m Total height1,0 m Weight1300 kgLump breakersLaitexBreakers > Lump breakersBrand > Laitex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
Unused main shaft for a Westfalia separator. Article number: 2231 3400 020., Type of Machine: Main Shaft, Drive line: 50 Hz, Condition: Never used
Main shaft for an Alfa Laval MRPX 214 TGV or MRPX 413 SGV Separator., Type of Machine: Main Shaft, Drive line: 50 Hz
General SKU269N248 MakeBoldt Friesland engineering bv TypeBM-1500-S22L2 No.85-138 Mounted on framecheck Main Features MaterialStainless steel Volume1500 Ltr. Motor15 KW Specified Features - Ribbon blender Ribbon blendercheck Double shaftcheck Capacity1500 l Trough sizes1500 x 1150mm With covercheck Inletdia.600mm Outlet(2x) +/-500x200mm With jacketcheck With adjustable packing glandscheck Motor(2x) With variable speed drivefrequency converter MaterialStainless steel 1.4301 (304) Information LocationBarneveld With switchcheck With switchgearcheck Floor space2,6x2,0 M Total height2,6 M Weight1440 KGRibbon blendersBoldt SystemsMixers > Ribbon blendersBrand > Boldt Systems What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the ma ...
General SKU231Y132 LocationBarneveld MakeWam Main Features Motor3 KW Inlet diameter100 mm Width350 mm Specified Features - Lump breaker Lump breakercheck Double shaftcheck Teeth height50 mm With hopperbag dumping station InletDN100 OutletDN350 with valve Motor3,0 kW (400 V, 1430 rpm) Rotor speed60 rpm MaterialStainless steel 1.4307 (304L) With jacketcheck General TypeDLP2035G Year of construction2010 Mounted on wheelscheck With switchcheck Floorspace1,30 x 1,25 m Total height1,70 mLump breakersNew arrivalsWamBreakers > Lump breakersNew arrivalsBrand > Wam What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
Material Name: SPROCKET 19T c/w short shaft, bearing n bearing support Material Brand: Generic Model: 19T Material Type: Chain drive sprocket assembly (with shaft & bearing housing) Material Specification: Sprocket: Medium carbon steel (C45 / S45C) Shaft: Carbon steel (C45 / EN8) Bearing: Deep groove ball bearing (chrome steel) Bearing support: Cast iron / mild steel housing PLEASE CONTACT AARON : +6017-369 8203 LOCATION: F11AW5 (F49)
Shaft material, shaft, steel shaft, hardened shaft, profile shaft, splined shaft, toothed shaft -Spline shaft: Splined shaft profile shaft 8 teeth -Diameter: 54 mm -Length: 2440 mm -Material: steel -Dimensions: see photo technical drawing -Dimensions: Ø 54 x 2440 mm -Weight: 37 kg
Plug-in shaft for hollow shaft, friction wheel, impeller, bridge crane, hall crane, assembly crane, flange hub, gear plug-in shaft, drive shaft, coupling, power coupling, gear coupling, gear coupling -Manufacturer: Konecranes, stub shaft Gearbox stub shaft: for crane chassis -Type: 4700419300 suitable for gearbox ID 34705 / ID 34752 -Shaft: Ø 160 x 600 mm -Groove width: 40 mm -Dimensions: see photos -Quantity: 2 pieces available -Price: per piece -Dimensions: Ø 480 x 735 mm -Weight: 173 kg/piece
Plug-in shaft for friction wheel, impeller, bridge crane, hall crane, assembly crane, flange hub, gear plug-in shaft, coupling, power coupling, gear coupling, gear coupling -Manufacturer: Konecranes, stub shaft Gearbox stub shaft: for crane chassis -Type: unfortunately without type designation, suitable for gearbox ID 34705 / ID 34752 -Shaft: Ø 70 x 150 mm -Bolt circle: Ø 422 x 25 mm -Dimensions: see photos -Quantity: 2 pieces available -Price: per piece -Dimensions: Ø 480 x 280 mm -Weight: 83 kg/piece
intake cross section: 2500 x 1,700 mm motor power: 160 kW rotor flight circle: 670 mm rotor execution: cutting inserts on tool holders counterknife: with cut gap adjustment machine weight: approx. 24,000 kg
RECON Part number: 1216-3150 6.234.0.300.004.5 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us
Twin Shaft shredder mod. ITS850x550E- 22 kW. Heavy duty construction. Shredding chamber dimensions 8500x550 mm with n°2 counter-rotating hexagonal shafts fitted with n°28 blades with a thickness of 30 mm, 1 hook double spaced to 60mm. Including n°1 main gearbox with straight spur gears for fast and slow shaft. Driven by n°1 x 22 kW motor The shredder is supplied complete with supporting stand, feeding hopper. The electric control panel of this shredder will be fitted with a Siemens PLC to control the working logic of the shredder including the automatic shafts reversal system in overloading conditions, a display will show the working parameters and operating conditions. The total weight of the shredder is around 3.000 Kg.
NEW! Part number: 1202 8436 (3.418.0.400.007.5) ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
Ready exhibition machine built in 2016 Mercodor ZM 44 Cutting Chamber 500 x 380 mm knife 14 3 mm hook drive 7,5 kw
Offer via gebr. flexible shaft grinding machine SUHNER type Rotomax 3.5 - Lightweight and compact design - Stable high-performance motor and infinitely variable torque adjustment - Wide range of shafts and tools - Control from the handpiece by optional manual shutdown Three-phase motor for 3-phase alternating current Protection class IP 44 Overload Power consumption 3.5 kW Voltage 400 V, 50 Hz Idle speeds Connection DIN 15: 500-10,000 min-1 Anschluss DIN 10: 500–25.000 min–1 Speeds infinitely adjustable Mobile Applications: Grinding, cutting, roughing, rusting, polishing, brushes, etc. For heavy work in foundries, in boiler and steel construction, in mechanical Workshops, stainless steel processing plants
new ! all stainless steel 2 speeds (30 and 60 rpm) 2 mixing directions 2,4 kW safety lid CE-approved overall dimensions (l x w x h) : 1.720 x 840 x 1.390 mm (open lid: H: 1.890 mm)
-PREPARATION AND PRODUCTION OF PRODUCTS -TRADE AND SALE OF PRODUCTS (NEW AND USED) -THE USE OF A COMPANY (JE AFTER AVAILABILITY)
Two-shaft shredder KS 1000/2 INDIVIDUAL - ADAPTABLE - ON YOUR RIGHTS Product information The 2-wave shredder KS 1000/2 is a powerful shredder that has a completely mechanically machined, solid grinding chamber. It is composed of 4 parts which are completely plugged into each other and screwed together, this gives an enormous stability and is very maintenance-friendly. The machine is powered by 2 high-performance electric motors that drive hexwaves running against each other via high-quality and robust planetary gearboxes 2. The hexagonal shafts can be equipped with individually made cutting discs of different thicknesses. The grinding chamber of the KS 1000/2 is double protected by wear plates and wear rings and is therefore completely armoured against wear. specifications: -Cutting room: 1000×600 -Drive: 2x15kW -Speed per shaft: 16.5 rpm -Advantage: Constant torq ...
new ! all stainless steel 2 speeds (20 and 40 rpm) 2 mixing directions 12 kw pneumatic lid inspection gantry safety lid CE-approved overall dimensions (l x w x h) : ± 2.210 x 1.130 x 1.770 mm (open lid : ± 2.630 mm) infeed height : ± 1.600 mm outfeed height : ± 720 + 20 mm + Loader for eurobins
Styrofoam shredder MAXI XL 1400 x 560mm MAXI 1400 x 600mm JUMBO 1800 x 800mm Insertion opening: L x W Polystyrene shredder MAXI XL: 1400mm x 560mm Polystyrene shredder MAXI: 1400mm x 600mm Polystyrene shredder JUMBO : 800mm x 800mm Dimensions: L x W x H (dimensions without blower) Polystyrene shredder MAXI XL: 2.4m x 0.9m x 1.6m Polystyrene shredder MAXI: 1.9m x 0.8m x 1.8m Polystyrene shredder JUMBO: 2.4m x 1.1m x 1.8m Motor power/connection/power conveying fan: Pre-shredder / conveyor blower Polystyrene shredder MAXI XL: 5.5 kW | Blower 2.2 kW Polystyrene shredder MAXI: 6.2 kW (with built-in screw under the pre-crusher) | Blower 2.2 kW Polystyrene shredder JUMBO 11.2 kW (with built-in screw under the pre-crusher) Conveyor blower 5.5 kW Throughput (EPS) Polystyrene shredder MAXI XL: 8-10 m3/h Polystyrene shredder MAXI: 25-30 m3/h Styrofoam ...
new ! all stainless steel 2 speeds (20 and 40 rpm) 2 mixing directions inspection gantry safety lid CE-approved variable speed plc control overall dimensions (l x w x h) : 1.970 x 1.000 x 1.600 mm (open lid: H: 2.250 mm) Quick & Clean system Seals of mix axles easy and quickly disassembly and monolithic seals + Loader for eurobins
Laska Mixer ME 250 VAC Capacity 180 Kg Mixing System Z Arm Kneader Mixer
DESCRIPTION ITS twin-shaft shredders with low speed and high torque designed to guarantee high performance and maximum reliability in the shredding of tough or bulky materials. Their solid and sturdy construction surpasses any other shredder on the market. As previously said: Given the large size of the grinding chamber and the solid construction, they are particularly suitable for grinding bulky and tough products such as wooden pallets, cardboard cores, metal scraps of various kinds and sizes, stacks of paper / cardboard sheets and many other materials that are usually difficult to grind. APPLICATIONS Large rolled up carpet Cardboard cores Pile of cardboard sheets Metal scraps WORKING PRINCIPLE The material is fed through a loading hopper placed above the grinding chamber which contains two rotating hexagonal shafts, equipped with circular blades of prede-fined thickness w ...
RECON ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
+ + PRE-ORDER + + Due to the current high demand, this model is currently sold out. It is already reordered. The estimated production time is 8-12 weeks. You can pre-order the PTO generator of your choice from us. - - - - - PTO generator 80 kVA Year of construction 2021 - NEW Description: - PTO generator - 80 / 88kVA - 230 / 400 volts - 50 Hertz - Required PTO speed: 400 rpm Digital Control / Meter: - Volt - Display (V) - Amps - Display (A) - Hertz - Display (Hz) - Power in kVA - Operating hours - Counter Sockets: - 2x 230 volts - 1x 380 Volt (125 A) Other equipment: - Residual current circuit breakers (from Schneider Electric, Germany) - Circuit breakers (from Schneider Electric, Germany) --> Other PTO generators with 18 kVA to 65 kVA are available. Price: - 5.750,- € + 19% VAT = 6.842,50 € Dispatch: - A Germany-wide transport includin ...
all stainless steel twin shaft paddle mixer suitable for vacuum suitable for cooling capacity ± 1.500 L loading height ± 2.000 mm discharging height ± 750 mm double lid at the top 2 discharge guards dimensions : ± 2.300 x 2.000 x 2.400 mm
+ + + PRE-ORDER + + + Due to the high demand, all PTO generators are currently sold out. All models are reordered and are in production. Unfortunately, an exact completion date is not yet known, as there are supply bottlenecks for important components that are required for production. Longer delivery times may be expected. A pre-order can be placed. - - - - - PTO Generator / PTO Generator --> This PTO unit is available in the power classes 18 - 65 kVA. List with prices can be found below in the text. Description: - PTO generator - 18 kVA / 22 kVA / 27 kVA / 38 kVA / 65 kVA - 230 / 400 volts - 50 Hertz - Required PTO speed: 428 rpm Digital Control / Meter: - Volt - Display (V) - Amps - Display (A) - Hertz - Display (Hz) - Power in kVA - Operating hours - Counter Sockets: - 2x 230 volts - 1x 380 Volt Other equipment: - Residual current circuit breakers ( ...
vertical belt coil mixer for the food industry in stainless steel Usable volume: 600 litres Cylindrical mixing container with conical transition to the outlet Mixing unit, vertical belt coil circulating in the mixing container Drive mixing unit Geared motor make-up North 7.5 kW, at 61 min-1 as a plug-in gearbox with hollow shaft Engine efficiency class IE3 Shaft sealing due to high-quality shaft sealing rings Feeding with sack hook and support grid Outlet with flat slider in stainless steel hand-operated with knife head 4 kW at 1500 min-1 with liquid addition lance with basic frame On request with control for additional price
Offer via gebr. Suhner Shaft Grinding Machine Rotofera DKM 4 Flexible shaft machine shaft grinding machine grinding Rotofera The 7-speed transmission Speed range: 850, 1600, 2100, 3200, 5700, 8000 and 12000 min-1 (400 V, 50 Hz, 3 Ph, 1.0 kW) Continuous - Separation of motor and tool guaranteed fatigue-free working Applications - Grinding - Disconnect - Roughing - Milling - De-rusting - Polishing - Brushes For light work, especially stainless steel, boiler and steel construction, polishing workshops, apparatus construction, kitchenand hospital supplies, etc.
Offer via gebr. Suhner Shaft Grinding Machine Rotovar DKM 7 Flexible Shaft Machine Shaft Grinding Machine Grinding Rotovar DKM7 Range: Wave A, 1000-12000 rpm. Wave B, 4600-40000 rpm. (400 V, 50 Hz, 3 Ph, 3.2 kW) incl. accessories 1 belt grinding head 1 brush grinding head Continuous - Separation of motor and tool guaranteed fatigue-free working Applications - Grinding - Disconnect - Roughing - Milling - De-rusting - Polishing - Brushes For light work, especially stainless steel, boiler and steel construction, polishing workshops, apparatus construction, kitchenand hospital supplies, etc.
Offer via gebr. Suhner Shaft Grinding Machine Rotofera DKM 4 Flexible shaft machine shaft grinding machine grinding Rotofera The 7-speed transmission Speed range: 850, 1600, 2100, 3200, 5700, 8000 and 12000 min-1 (400 V, 50 Hz, 3 Ph, 1.0 kW) Continuous - Separation of motor and tool guaranteed fatigue-free working Applications - Grinding - Disconnect - Roughing - Milling - De-rusting - Polishing - Brushes For light work, especially stainless steel, boiler and steel construction, polishing workshops, apparatus construction, kitchenand hospital supplies, etc.
maximum number of results exceeded
please refine your search
