shaft used for sale

Komptech Crambo 5200 Direct Category: Wood & Green Waste Shredder Specification: Category: Mobile Twin-Shaft Shredder Serial / reference number: 447184 Power: 328 kW/446 hp Weight: 26 000 kg Emission class: Tier 4 Final / Stage V Equipment and description: 3-axle chassis Trailer CAT® C13 Tier 4 final, Stage V Nominal speed 1,900 rpm 1 gear: max. 23 2 gear: max. 34 rpm Roller drive mechanical Roller length 2,820 mm Roller diameter 610 mm 134 Tools (sickle teeth or planer teeth) Overbelt magnet Biocutting unit possible Remote control Material: good for woody biomass green cuttings, rootstocks, bark, waste wood, etc. Central lubrication Screen baskets: 125 x 125 mm Square / possible: 80 round, square: 100 x 100, 120 x 120, 150 x 180, 250 x 250, etc... Quick-change system of screen basket Noise emission: 114 dB (A)

Komptech Crambo 5200 Direct (New) Category: Wood & Green Waste Shredder Specification: Category: Mobile Twin-Shaft Shredder Serial / reference number: 447242 Power: 328 kW/446 hp Weight: 27 300 kg Emission class: Tier 4 Final / Stage V Equipment and description: 4472423 Axle chassis Trailer CAT® C13 Tier 4 final, Stage V Nominal speed 1,900 rpm 1 gear: max. 23 2 gear: max. 34 rpm Roller drive mechanical Roller length 2,820 mm Roller diameter 610 mm 134 Tools (sickle teeth or planer teeth) Overbelt magnet Biocutting unit possible Remote control Material: good for woody biomass green cuttings, rootstocks, bark, waste wood, etc. Central lubrication Screen baskets: 125 x 125 mm Square / possible: 80 round, square: 100 x 100, 120 x 120, 150 x 180, 250 x 250, etc... Quick-change system of screen basket Noise emission: 114 dB (A)

Komptech Crambo 6200 E Direct Category: Wood & Green Waste Shredder Specification: Category: Stationary Twin-Shaft Shredder Serial/reference number: 495005 Power: 280 kW Weight: 17 200 kg Emission class: electric drive In need of repair Equipment and description: Nominal speed 1,900 rpm 1 gear: max. 23 2 gear: max. 34 rpm Roller drive mechanical Roller length 2,820 mm Roller diameter 610 mm 134 Tools (sickle teeth or planer teeth) Overbelt magnet Biocutting unit possible Remote control Material: good for woody biomass green cuttings, rootstocks, bark, waste wood, etc. Central lubrication Screen baskets: 125 x 125 mm Square / possible: 80 round, square: 100 x 100, 120 x 120, 150 x 180, 250 x 250, etc... Quick-change system of screen basket

Komptech Multistar L3 Category: Star Screen Specification: Serial / reference number: 75070 Designation: Multistar L3 Achievement: Weight: kg Emission class: Tier 4 Final / Stage V Equipment and description: Screen with 3 fractions – fine fraction (mm): 0/10... 25 Middle fraction (mm): 10... 25/60… 90; Coarse fraction (mm): > 90... 120 75 kW/A Diesel Generator Bunker volume: 7 m3 Feed height (mm): 3,450 / Feed length (mm): 3,750 Max. discharge height medium and fine fraction (mm): 3,500 / Max. discharge height coarse fraction (mm): 2,850 Weight approx. 21 tons / Transport length (mm): 11,500 / Transport width (mm): 2,250 / Transport height (mm): 4,000 Throughput depending on the type of material up to approx. 200 m3/h

Komptech Terminator 5000 SD Category: Garbage Shredders Specification: Category: Universal Waste Shredder Serial / reference number: 481148 Power: 446 hp / 328 kW Weight: 27 000 kg Emission class: Tier 4 Final / Stage V Equipment and description: Terminator 5000 S Diesel engine: CAT C13 Tier 4 Final/Stage V F-Crushing Unit Armoured rollers – new Sickle teeth Hydraulically adjustable cutting gap 0-45 mm Overbelt magnet Central lubrication Remote control

Doppstadt DW 3060 D Single-shaft pre-shredder Equipment: MTU R 1100 EUROMOT IV diesel engine, 320 KW Total weight: approx. 25,000 KG 18-channel radio remote control Rear hinge 5.5 m, hydraulically foldable Comb extension Humidification device 21 roll teeth Form C DoppLock quick-change system 20 comb teeth trapezoid Overbelt magnet Hopper Elevation Service Details The machine is in very good technical and visual condition The machine receives a brand-new planetary gearbox before delivery Warranty: The machine will be sold in the condition existing at the time of delivery. The seller assumes no liability for defects We reserve the right to sell in advance, make changes and repairs.

DUAL-SHAFT HYDRAULIC MULTI-PURPOSE PRIMARY SHREDDER, Loading hopper, bespoke to project and feeding system, Sturdy supporting structure in carbon steel height 2 mt from floor, with catwalk and rails, shredding surface 1.500 x 1.100 mm, 2 counter-rotating steel shafts with differentiated speed, Knives : 75 or 100 mm thick 4 hooks or bespoke, Hydraulic motor 75 kw, 400 V/50 Hz, hydraulic power unit,, electrical control panel with PLC and connection for remote assistance, automatic overload reversal with programmable number of reverse cycles, Delivery : about 4-5 months from confirmation (excluding Winter/Summer holidays), Complete with electrical drawings, User manual, CE compliance, Possible addition of loading and extraction belt with metal separator, width: 1.500 mm, Power: 75 kw

VMC ECO S-1.800, Rotor length 1.800 mm, 132 kW Drive 380-400V 3Ph, 420 A 60Hz. IP55, complete with loading hopper, hydraulic ram 11 kW, hydraulic power station, control panel, good working conditions, Constructed in 11-2001, offered AS IS WHERE IS, installed power - used power in work: about 60-65% : 132 kW, availability: immediate, working width: 1.800 mm., options available: loading belt, extraction system, capacity: depending on materials and feeding rate, conditions: Very good, type: single shaft - electric

Vertical Shaft Horizontal Impact Crusher / Mill, With dosing feed hopper

Stock# U2376-4 Used stainless steel twin shaft paddle mixer by Alco Food Machines (DE) model AMP 300-S with total volume of mixing chamber 330 l. Working volume of mixing chamber about 230 l. Mixing chamber has internal dimensions L 900 mm x W 805 mm x D 535 mm. Top open. Machine is equipped with two mixing shafts, each driven via gearbox and el motor 0.9/1.5 kW, 705/1415 rpm, 380/400V, 50 hz. Each shaft is equipped with two half-ribbons and seven mixing paddles. Discharge through front wall two discharge outlets, each equipped with stainless steel lid, operated pneumatically. Machine is mounted on four stainless steel legs and is equipped with local control panel. Last time used in food industry.

Key data: 25 t

Automatic straightener, shaft straightener , MAE -25RH, 1996, used Manufacturer: Maschinen- & Apparatebau Götzen GmbH, Germany Connected load: 14.5kva , Dim.: 2.5 x 1.5 x 1.8m, Weight : 5000kg

Automatic straightener, shaft straightener , MAE -25RH, 1996, used Manufacturer: Maschinen- & Apparatebau Götzen GmbH, Germany Connected load: 14.5kva , Dim.: 2.5 x 1.5 x 1.8m, Weight : 5000kg

- Brand: SILMISA - With hydraulic pusher - Model No.: MSA.30.126 - Year: 2008 - Power: 75 hp (55 KW) - Cutting chamber: 1260 x 900 - Blade: 40 x 40 mm - With electric panel

The Velati M 2000 twin shaft paddle mixer is a robust and reliable industrial device, specially designed for food processing in commercial kitchens or production facilities. This type of used mixer is characterized by its high capacity and efficiency in mixing a wide variety of ingredients. Thanks to the twin shaft technology, the M 2000 ensures even mixing of the materials while minimizing mixing time. The paddles are designed to ensure optimal mixing without excessive friction, which maintains product quality. The stable construction of the device offers long-lasting performance and lower maintenance requirements. Ideal for use in food processing, this mixer is a valuable addition to any company that requires high-quality and consistent mixes., power: approx.: 1,600 kg mixing volume, Dimensions / weight: Mixer: L x W x H: 4,650 x 1,500 x 1,950 mm, auger: L x W: approx. 5,100 x 2,000 mm ...

Shredder of the leading company LINDNER model: KOMET 1800 single shaft number of knives 50pcs. Ideal for SRF/RDF (paper, plastic, fabric, wood), accompanied by the electrical panel and the control panel. Drive motor: 200Kw ABB 400V/50Hz Hydraulic unit: Dorninger-Heavy Duty 1:65lt/min ,Drive Capacity:11Kw The machine is in excellent condition, being sold due to replacement with a new more advanced model.

Control defective, Dimensions / weight: LxBxH: 2.200 mm x 1.200 mm x 2.000 mm.

Offer via gebr. Suhner Shaft Grinding Machine Rotofera DKM 4 Flexible Shaft Machine Shaft Grinding Machine Grinding Rotofera The 7-speed gearbox Speed range: 850, 1600, 2100, 3200, 5700, 8000 and 12000 rpm (400 V, 50 Hz, 3 Ph, 1.0 kW, 16.8 kg)  Continuous use - Separation of motor and tool ensured Fatigue-free working Areas of application - Grinding - Separation - Roughing - Milling - Rust removal - Polishing - Brushes For light as well as for the heaviest work, especially of stainless steel, in boiler and steel construction, in polishing workshops, in apparatus construction, for kitchens and hospital supplies, etc.

Twin-shaft shredder, 380 volt power supply, ideal for plastic, wood, iron chips, paper. Loading mouth 620 x 570 mm, working area 350 x 300 mm, never used 0 hours Overall dimensions: 1500 x 1000 x 1500 mm Weight: 1000 kg MACHINERY WITHOUT CE MARKING, NOT COMPLIANT WITH EU DIRECTIVES, INTENDED EXCLUSIVELY FOR NON-EU MARKETS Auction-ID: A7-44802-56

Twin-shaft shredder, 380 volt power supply, ideal for plastic, wood, iron chips, paper. Loading mouth 620 x 570 mm, working area 350 x 300 mm, never used 0 hours Overall dimensions: 1500 x 1000 x 1500 mm Weight: 1000 kg Auction-ID: A7-44803-138

Twin-shaft shredder, 380 volt power supply, ideal for plastic, wood, iron chips, paper. Loading mouth 620 x 570 mm, working area 350 x 300 mm, never used 0 hours Overall dimensions: 1500 x 1000 x 1500 mm Weight: 1000 kg Auction-ID: A7-44802-138

Twin-shaft shredder, 380 volt power supply, ideal for plastic, wood, iron chips, paper. Loading mouth 620 x 570 mm, working area 350 x 300 mm, never used 0 hours Overall dimensions: 1500 x 1000 x 1500 mm Weight: 1000 kg MACHINERY WITHOUT CE MARKING, NOT COMPLIANT WITH EU DIRECTIVES, INTENDED EXCLUSIVELY FOR NON-EU MARKETS Auction-ID: A7-44803-56

AGICOM recycling machines: Used single-shaft shredder MR2260 The used single-shaft shredder MR2260 is a powerful and energy-efficient shredder for the pre-shredding of cables, electronic waste, waste plastics, wood and much more... It has two stator knives for better product quality and higher hourly output. The shredder is equipped with an electronic control system. This monitors the hydraulic feed and the cutting shaft. As a result, the single-shaft shredder rarely has to reverse and retains its high throughput. Cooling is included. Year of manufacture: 2019, Machine in good condition. Ready for immediate use! Number of blades: 23 + 2 (rotor + stator) Rotor length: 600 mm Electric motor: Siemens 19.0 kW + 2.2 kW, 400 V Control: Siemens Dimensions: approx. 1750 x 1300 x 1800 mm Capacity: max. 200 – 400 kg/hour Safety: retraction of the feed in the event of overload, re ...

Shaft Cutting Knife No. 1815-12 3 pieces NEW!  Shaft cutting knife 3 piecesNo. 1815-12Stainless steel, full length 44 cm,  Only with hollows, other side blunt Details see picture

BOLDT BFMA double-shaft paddle mixer – 220 L – stainless steel – year of manufacture 2007, Industrial double-shaft mixer with 2 rotation directions and front discharge, ---------------------------------------------------------------, Machine description, For sale is a BOLDT BFMA double-shaft paddle mixer from the year of construction 2007 in Stainless steel version., The machine is ideally suited for homogeneous mixing of:, - powder, - Granules, - spice blends, - Paste products, - Food and non-food products, The counter-rotating mixing shafts achieve a particularly even and gentle mixing., ---------------------------------------------------------------, ⚙️ Technical Data, - Manufacturer: BOLDT, - Type: BFMA, - Year of manufacture: 2007, - Gross content: 220 liters, - Net weight: 170 liters, - Material: completely stainless steel, - Discharge: 2 Frontentleerungsventile, - Mixin ...

Cardan shaft, cardan shaft, universal joint, center bearing, angular gear -Cardan shaft: angular gear, unused -Type / order no .: 21001375 402027/201 7610AVA07 -Shaft: Ø 25 x 75 mm -Measurements: see photos -Quantity: 4x angular gear available -Price per piece -Dimensions: 335/130 / H120 mm -Weight: 5.6 kg / pc.

Cardan shaft, cardan shaft, universal joint, center bearing, angular gear -Cardan shaft: angular gear, unused -Type / order no .: 21001375 402027/201 7610AVA08 -Shaft: Ø 32 x 80 mm -Measurements: see photos -Number: 10x angular gear available -Price per piece -Dimensions: 390/160 / H165 mm -Weight: 11.1 kg / pc.

Drive shaft, cardan shaft, universal joint -Cardan shaft: Universal joint, unused -Type / Order No.: 21001375 402027/201 7610AVA02 -Shaft: Ø 24 mm -Square: 15 x 15 mm -Dimensions: see photos -Number: 7x universal joints present - Price: per piece -Overall dimensions: 135/57/H46 mm -Weight: 0.8 kg/pc.

Drive shaft, cardan shaft, universal joint -Cardan shaft: Universal joint, unused -Type / Order No.: 21001375 402027/201 7610AVA01 -Shaft: Ø 36 mm -Square: 19 x 19 mm -Dimensions: see photos -Number: 5x universal joints available -Price: per piece -Overall dimensions: 165/70/H62 mm -Weight: 1.7 kg/pc.

Cardan shaft, cardan shaft, universal joint -Cardan shaft: universal joint, unused -Type / order no .: 21001375 402027/201 7610AVA03 -Shaft: Ø 30 mm -Square: 15 x 15 mm -Measurements: see photos -Quantity: 4x universal joint available -Price per piece -Dimensions: 276/55 / H46 mm -Weight: 1.5 kg / pc.

Cardan shaft, cardan shaft, universal joint, center bearing, holder -Cardan shaft: center bearing, unused -Type / order no .: 21001375 402027/201 7610AVA06 -Inside: O 44 mm -Measurements: see photos -Number: 12x holders available -Price: per piece -Minimum order: 4 pieces -Dimensions: 147/93/30 mm -Weight: 0.6 kg / pc.

Frame formwork, pipe hangers, manhole ring hangers, manhole frame lifters, manhole ring lifters, sewer ring lifters -Manufacturer: Zagro, Hydraulic manhole frame lifter type HK 6 -Lifting round shafts: inner diameter of approx. 60 cm, outer diameter of approx. 78 cm -4 lifting cylinders -Transport wheels -Dimensions: 1400/1120/H1020 mm -Weight: 169 kg

cardan shaft, cardan shaft, universal joint shaft, drive shaft -Cardan shaft:Cardan joint shaft with length compensation and double joint on both sides -Dimensions retracted: 700 mm -Flange: bolt circle Ø 52 x 6 mm -Flange: outside Ø 65 mm -Sliding length: see photos -Total dimensions: Ø 65 x 700 mm -Weight: 4 kg

Coupling, power coupling, gear coupling, transmission coupling, flange hub for crane undercarriage, running wheel, bridge crane, hall crane, assembly crane, flange hub, coupling star, claw coupling, shaft coupling -Shaft coupling: Schan PBK Ø 200 mm -Bolt circle: Ø 170 mm -Dimensions: see photos -Quantity: 1 piece available -Dimensions: Ø 200 x 60 mm -Weight: 4.0 kg

gear, gears, gear shaft, pinion shaft, spur gear, spur gear -Gear shaft: Pinion shaft with straight teeth -Gear: Diameter Ø 60 mm / 22 teeth -Tooth width: 25 mm -Shaft mounting: Inner Ø 22 mm -Dimensions: see photo technical drawing -Quantity: 1x gear shaft available -Price: per piece -Overall dimensions: Ø 60 x 50 mm -Weight: 0.6 kg/pc.

gear, gears, gear shaft, pinion shaft, spur gear, spur gear -Gear shaft: straight-toothed pinion shaft, 2 pieces -Gear: Diameter Ø 48 mm / 22 teeth -Tooth width: 10 mm -Shaft mount: Ø 18/16 mm / Ø 19/16 mm -Dimensions: see photo -Shipping/Price: complete -Transport dimensions: 92/48/H70 mm -Total weight: 0.8 kg

gear, gears, gear shaft, pinion shaft, spur gear, spur gear -Gear shaft: straight-toothed pinion shaft -Gear: Diameter Ø 95 mm / 16 teeth -Tooth width: mm -Shaft: Ø 60 mm -Dimensions: see photos -Number: 14x gear shaft available -Price: per piece -Dimensions total: Ø 95 x 243 mm -Weight: 6.4 kg/piece

gear, gears, gear shaft, pinion shaft, spur gear, spur gear -Gear shaft: straight-toothed pinion shaft -Gear: Diameter Ø 81 mm / 25 teeth / Module 3 -Tooth width: mm -Shaft: Ø 60 mm / inner Ø 38 mm -Dimensions: see photos -Number: 7x gear shaft available -Price: per piece -Dimensions total: Ø 81 x 175 mm -Weight: 3.1 kg/piece

gear, gears, gear shaft, pinion shaft, spur gear, spur gear -Gear shaft: straight-toothed pinion shaft -Gear: Diameter Ø 246 mm / 80 teeth / Module 3 -Tooth width: mm -Shaft holder: inner Ø 25 mm -Bolt circle: Ø 100 mm M8 -Dimensions: see photos -Quantity: 2x gear shaft available -Price: per piece -Dimensions total: Ø 246 x 40 mm -Weight: 4.0 kg/piece

gear, gears, gear shaft, pinion shaft, spur gear, spur gear -Gear shaft: straight-toothed pinion shaft -Gear: Diameter Ø 136 mm / 37 teeth -Tooth width: mm -Shaft holder: inner Ø 72 mm -Bolt circle: Ø 100 mm M8 -Dimensions: see photos -Number: 6x gear shaft available -Price: per piece -Dimensions total: Ø 136 x 42 mm -Weight: 5.2 kg/piece

Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint -Manufacturer: Elbe, Cardan shafts with universal joint -Type: Length S/X 350/40 -Elbe Art.No.: 9.990.000.0354 -Flange Ø 90 mm -Bolt circle: Ø 75 x 8 mm -Quantity: 10x cardan shafts available -Price: per piece -Dimensions: Ø 90 x 400 mm -Weight: 5.1 kg/pc.

Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint -Manufacturer: Elbe, Cardan shafts with universal joint -Type: Length S/X 320/35 -Elbe item no.: 0.107. 100,0001 -Flange Ø 75 mm -Bolt circle: Ø 62 x 6 mm -Number: 6x cardan shafts available -Price: per piece -Dimensions: Ø 75 x 330 mm -Weight: 2.7 kg/pc.

Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint -Manufacturer: Elbe, Cardan shafts with universal joint -Type: Length S/X 350/35 -Elbe item no.: 0.107. 100,0001 -Flange Ø 75 mm -Bolt circle: Ø 62 x 6 mm -Number: 6x cardan shafts available - Price: per piece -Dimensions: Ø 75 x 360 mm -Weight: 2.8 kg/pc.

Winding roller, winding shaft, tensioning shaft, pneumatic expansion shaft, reel, reel rod, trapezoidal thread spindle, spindle, unwinding reel, unwinding reel, sheet metal unwinder -Manufacturer: Tidland, winding shaft -Type: G890E -Drive shaft: Ø 40 x 80 mm -Mounting: Bolt circle Ø 220 x 11 mm -Number: 8x winding shaft available -Price: per piece -Dimensions: Ø 250 x 855 mm -Weight: 53 kg/unit

Loma PTO shaft pto shaft type 5 short 900mm 1/38\" production febr. 2021 Slip clutch torque limiter / friction PTO CE. Auction-ID: A1-40132-259

agicom recycling machine trade: The used single-shaft shredder from Tecnoecology is extremely powerful and is ideal for shredding cables, but also for composites and plastics. Equipment: hydraulic pusher. Number of blades: 7+8 (rotor + stator) Rotor speed: 130 rpm Cutting rotor: Ø 180 mm - 500 mm Electric motor: 17.0 kW, 380 V Weight: approx. 1,200 kg Dimensions: approx. 1540 x 1150 x 1700 mm Throughput: max. 200 - 400 kg/hour Safety: retraction of the feed in the event of overload, reverse rotation of the rotor in the event of blockage

ROBLAND TI 120 X3 digital router with tilting shaft • Year : 2024 • New machine • Motor : 400 V / 7 kW (9.5 hp) – S6 service  • Table wood dimensions: 320 × ,095 mm • Max. tool diameter: 260 mm • Speeds : 3000 / 4500 / 6000 / 7000 / 10000 rpm • Interchangeable shaft: Ø 30, 32, 35, 40, 50 mm or 1\"1/4 • Shaft inclination: from -5° to +45° • Programmable up, down and tilt• Hood on linear guides, aluminium protector• 7\" colour touchscreen mounted on stem • Automatic star/triangle start• Weight : 650 kg • Options : in/out table extensions and front support Auction-ID: A1-45486-21

Capacities : Thickness × width: 120 × 230 mm Minimum / maximum width: 20 – 230 mm Minimum / maximum height: 8 – 120 mm Minimum length single piece: 750 mm Speeds: Variable feed: 5 to 24 m/min Spindle rotation speed: 6,000 rpm Composition and equipment: 2,500 mm Input table 2,500 mm Motorised adjustment of machining width and height Adjustments accessible on the front panel with the hood closed SIKO digital meters on each setting Wrap-around and sound-absorbing enclosure with panoramic bay Tool shafts Ø 40 mm Shaft configuration (7 shafts): Lower horizontal shaft: 5.5 kW (7.5 hp) Right rotor: 11 kW (15 hp) Left rotor: 11 kW (15 hp) Vertical shaft: 5.5 kW (7.5 hp) Upper horizontal shaft: 7.5 kW (10 hp) Lower horizontal shaft: 7.5 kW (10 hp) Universal shaft: 5.5 kW (7.5 hp) Dimensions (estimated)Approx . 5,800 × 2,100 × 1,900 mm (to be confirmed) Weight (estimate): Approx. 4 ...