shaft used for sale

Coolant pump, peripheral wheel pump, water pump, special pump SPECK - PUMPS CSY-4081 CSY-4081. M2228 Qmax: 20 l/min Hmax: 30 mFls Engine: 1,0 kW 2800 rpm 230 / 400 V 3AC 50 Hz Material (pump housing): Brass Motor foot: 135 x 112 mm hole spacing (parallel to shaft): 90 mm hole spacing ( transverse to shaft ): 112 mm hole diameter: Ø 9 x 14 mm ( slotted hole, transverse to the shaft ) used, tested ! Dimensions: 275 x 225 x 145 mm

Cardan shaft, propeller shaft PAGUS length: approx. 530 - 560 mm shaft outside Ø 60 mm flange Ø 110 mm bolt circle Ø 95 mm 6 bores Ø 10 mm New ! Dimensions: 600 x 120 x 120 mm

Drive unit PAGUS Roll diameter: Ø 105 mm Roll width: 240 mm a roller with a six-line shaft stub (spline shaft profile), lockable shaft diameter: Ø 35 mm Roll opening: 400 x 260 mm Height:160 mm Footprint: 900 x 345 mm New ! Dimensions: 900 x 430 x 190 mm

Assortment of universal joints, universal joint, double universal joint, 7 pieces PAGUS 2x double universal joint outer diameter: Ø 13 mm length: 60 mm for shaft diameter: Ø 8 mm 2x double universal joint outer diameter: Ø 40 mm length: 155 mm for shaft diameter: Ø 22 mm 3x universal joint outer diameter: Ø 25 mm length: 56 mm for shaft diameter: Ø 12 mm material: steel new ! Dimensions ( packaging ): 170 x 90 x 60 mm

connecting rod, connecting rod, push rod, drive rod, with crosshead pin JOSEF EMMERICH PUMPENFABRIK GmbH 22337005 connecting rod foot ( split ) with bearing bush for shaft diameter Ø 70 mm, bearing width: 70 mm connecting rod head with bearing bush for shaft diameter Ø 40 mm, bearing width: 40 mm bearing distance: 300 mm crosshead pin: SP535-G4-0006 bolt diameter Ø 40 mm, Length: 104 mm Shaft diameter: Ø 38 mm New ! Dimensions: 420 x 133 x 70 mm

Wire feeder unit, wire feeder, wire feeder PAGUS Ø 4 mm Wire diameter: max. Ø 4 mm with worm gear: Gear ratio: 31,5 : 1 Feed roller diameter: Ø 35 mm drive shaft: Shaft diameter: Ø 10 mm shaft length: 15 mm groove width: 18 mm Flange: 62 x 90 mm New ! Dimensions: 150 x 115 x 62 mm

DC tachogenerator VEM, ELMO HARTHA Type: 1633.12 3000 rpm 100 V shaft diameter: Ø 14 mm shaft length: 30 mm groove width: 5 mm Flange diameter: Ø 110 / 160 mm bolt circle diameter: Ø 130 mm hole diameter: Ø 8.5 mm with bellows coupling TGL 22048 for 2x shaft diameter Ø 14 mm New ! Dimensions ( tachogenerator ): 205 x 160 x 180 mm Dimensions ( transport box ): 330 x 230 x 255 mm

Tube expander, spindle, splined shaft - Splined shaft: Shank O 62 mm - Wedge: outer diameter 60/70/80 mm splined shaft cone adjustable -Dimensions: see techn. Drawing with the photos -Dimensions: O 135 x 445 mm -Weight: 14.4 kg

Three-phase electric motor VEM K20R 80 K 6 H ( K20R80K6H ) 0,0,75 kW 935 rpm 230 / 400 V 3AC 50 Hz IP 55 Design: B3 Shaft diameter: Ø 22 mm Wavelength: 50 mm Groove width: 6 mm Motor base: 125 x 153 mm hole spacing ( parallel to shaft ): 100 mm hole spacing ( transverse to shaft ): 125 mm hole diameter: Ø 10.5 mm New ! Dimensions: 275 x 155 x 200 mm

Three-phase electric motor LEROY SOMER Type: PLS250SP-T 110 kW 2949 - 2957 rpm 380 - 400 V 3AC / IP 23IK 08 shaft diameter: Ø 65 mm motor base: 470 x 400 mm hole spacing (parallel to the shaft): 310 / 40 mm hole spacing ( transverse to the shaft ): 410 mm hole diameter: Ø 25 mm As good as new ! Dimensions: 950 x 520 x 730 mm

WEIBERT WJ-D53 Thickness planer Planing width of 530mm n=5000min 4 knife shaft Tersa n=5000min Planer shaft D=125mm Max. chip removal of 8mm Passage height from 3-300mm Feed speed of 8 and 16 m/min. Motor for feed 1.5 KW (2 HP) Suction nozzle of 160mm Electronic height adjustment of the thickness table with display Machine table, planing shaft bearing block and table guide made of Cast iron! Numerical display of the planing height Long thickness table Motor 5.5KW 400V 50HZ G&WJ-D53

Pendulum holder LEHNERT® FERTIGUNGSMESSTECHNIK 1043.051 W 578 526 Shaft 1: Diameter: Ø 20 mm, Length: 68 mm Shaft 2: Diameter: Ø 16 mm, Length: 9 mm Shaft 3: Diameter: Ø 10 mm, Length: 20 mm Base body: Diameter: Ø 34 mm, Length: 16 mm New ! Dimensions: 115 x 54 x 34 mm

Geared motor SEW R87 DT80N4/TF ( R87DT80N4/TF ) 0.75 kW 5.6 rpm 220 - 240 / 380 - 415 V 3AC 50 Hz IP55 60 Hz - operation is possible ! shaft diameter: Ø 50 mm wavelength: 100 mm groove width: 14 mm sprocket: 2x diameter: Ø 147 mm, width: 17 mm, teeth: 13 motor base: 310 x 290 mm hole spacing ( parallel to shaft / transverse to shaft ): 260 / 215 mm 4x bore: Ø 17 mm used, tested ! dimensions ( without eyelet ): 610 x 290 x 300 mm

Gear, stin gear, angular gear -Translation: 1: 10.3 -Drive shaft: Ø 14 mm hollow shaft -Hollow shaft: Ø 14 mm -Number: 17x gears available -Price: per piece -Dimensions: 220/220/H230 mm -Weight: 3.9 kg

Electric motor, three-phase motor -shaft output on both sides -Power: 4 kW -Speed: 1435 rpm -Shaft: Ø 28 x 130 mm -Shaft: Ø 30 x 95 mm -Construction: B3 -Dimensions: 600/380/H420 mm -Weight: 80 kg

adjustable gear motor, variable speed gear motor, electric motor -Manufacturer: Gearbox MOTOVARIO TKFL/10 -Manufacturer: Motor ASEA MT80B19F100-4 -Motor power: 0.75 kW -Speed range: 190-1000 rpm -Motor: adjustable -height of the shaft axis: 105 mm -1x drive shaft: Ø 24 mm -1x drive shaft: Ø 19 mm -Construction: B5 -Number: 2 motors available -Price: per piece -Dimensions: 445/255/240 mm -Weight: 29 kg

Geared motor with brake, inverter SEW-Eurodrive WA20/T DT71D4/BMG/MM05/RJ1A/AND3/AZSK ( WA20/TDT71D4/BMG/MM05/RJ1A/AND3/AZSK ) 0,055 / 0.55 kW 28 - 283 rpm 380 - 500 V 3AC 50 / 60 Hz IP54 hollow shaft diameter: Ø 20 mm wavelength: 100 mm groove width: 6 mm 2x flange: diameter Ø 62 / 55 mm bolt circle diameter: Ø 70 mm 4x Threaded hole: M6 x 1,0, Depth: 18 mm 2x Gear foot: 90 x 80 mm hole spacing ( parallel to shaft ): 90 mm hole spacing ( transverse to shaft ): 75 mm hole diameter: Ø 6.5 mm used, tested ! Dimensions: 380 x 200 x 145 mm

geared motor SEW R17DT71D4/TF/VS 0,37 kW 121 rpm 220 - 240 / 380 - 415 V 3AC IP54 shaft diameter: Ø 20 mm gear foot: 136 x 132 mm hole spacing ( parallel to shaft ): 110 mm hole spacing ( transverse to shaft ): 110 mm hole diameter: Ø 9.5 mm sprocket: Ø 57 / 44 mm, chain width: 8 mm, teeth: 13 used, tested ! Dimensions: 370 x 180 x 150 mm

Incremental rotary encoder with solid shaft, incremental rotary encoder with solid shaft, absolute rotary encoder, encoder, rotary encoder, encoder, absolute rotary encoder, absolute encoder, function encoder, resolver, resolver, rotary pulse encoder, tacho generator, incremental encoder -Manufacturer: Hohner, Encoder rotary encoder -Type: 00 8000 -Shaft: Ø 12 x 25 mm -Quantity: 2x encoders available -Price: per piece -Dimensions: Ø 90 x 143 mm -Weight: 1.1 kg/pc.

Icma San Giorgio MCM/60V – 40D twin screw co-rotating extruder Mod. MCM/60V-40 D and down stream equipment High performances, intermeshing screw type for self cleaning characteristics. Screws Ø 60 mm Nominal L/D ratio 1:40 Max screw speed 300 rpm Barrel Modular design made up by 10 square-barrel sectors, each one 4 D long Barrel sectors made of LK3 nitrided steel Built-in water cooling circuit, simple construction and easy to maintain High efficiency heating system by cartridge heater Broached shaft made in special alloy brake/yield/torsion resistant Modular design Screw elements made of K 110 wear resistant steel Gear box Torque per screw shaft Nm. 1050 per each shaft Gear-ratio 4.28 : 1 Min. bearing lifetime at max. speed and motor power 20,000 working hours @ 160 bar Main A.C. motor Power applied to gearbox shafts KW 66 Speed rpm 1285 Water cooling unit  ...

Three-phase electric motor VEM KMRB 100 S2 ( KMRB100S2 ) 4,0 kW 2880 rpm 220 / 380 V 3AC 50 Hz design: B3 IP54 shaft diameter: Ø 28 mm wavelength: 60 mm groove width: 8 mm motor base: 174 x 190 mm hole spacing ( parallel to shaft ): 110 mm hole spacing ( transverse to shaft ): 160 mm hole diameter: Ø 12.5 mm New ! Dimensions: 360 x 200 x 235 mm

Geared motor VEM ZG2 KPR 71 K 6 ( ZG2KPR71K6 ) 0,37 kW 20 rpm 220 / 380 V 3AC IP54 shaft diameter: Ø 32 mm wavelength: 80 mm groove width: 10 mm motor base: 165 x 205 / 210 mm hole spacing ( parallel to shaft ): 120 mm hole spacing ( transverse to shaft ): 170 mm hole diameter: Ø 14 mm New ! Dimensions: 485 x 210 x 235 mm

Geared motor with brake SEW EURODRIVE S60 DT100LS-4B/HR/TH/Z ( S60DT100LS-4B/HR/TH/Z ) 2,5 kW 67 rpm 220 / 380 V 3AC 50 Hz IP44 gearbox shaft diameter: Ø 35 mm wavelength: 60 mm, Groove width: 10 mm motor Shaft diameter: Ø 35 mm Shaft length: 40 mm, Groove width: 6 mm Gear foot: 200 / 170 x 150 mm hole spacing: 130 mm all holes: Ø 14 mm Sprocket: Diameter: Ø 100 mm, Width: 15 mm, Teeth: 11 used, checked ! Dimensions: 690 x 250 x 240 mm

High-speed machining motor PERSKE type: KCS 71.16-2 D ( KCS71.16-2D ) 4 kW 2860 rpm 220 / 380 V 3AC at 50 Hz IP 54 shaft diameter: Ø 40 mm with manual shaft lock !with manual shaft lock ! used, tested ! Dimensions: 520 x 200 x 200 mm

We offer you a used PET bottle crusher of the manufacturer BOREMA, type R-1200 F, year of construction 2013, for residual emptying, deaeration and pre-compaction of the fed PET bottles, from 0.3 up to 2.5 l content. The machine has a chassis and can be moved into and out of the feed chute of your baler. The machine has a throughput capacity of approx. 85,000 bottles/h, corresponding to approx. 3t/h. We have the following technical information: Manufacturer: BOREMA Umwelttecjhnik AG Type: R-1200 F (with trolley for retracting and extending) Year of manufacture: 2013 Drive power: 11 kW Connected load: 15 kW Rated current: 32 A Back-up fuse: 40 A Type of construction: Continuous system Function: Double rotor press system Rotor pretension pneumatic: approx. 16t Overload protection: by anti-blocking system Input material: PET disposable and returnable empty bottles 0.3 to 2.5 L capacity Input ...

DC motor and speedometer generator BAUMÜLLER GNA 132 MVA ( GNA132MVA ) 12,9 / 20 / 20 kW 1000 / 1550 / 4500 rpm 260 / 400 / 400 V DC extraneous excitation: 310 / 310 / 70 V DC shaft diameter: Ø 38 mm wavelength: 80 mm groove width: 10 mm motor base: 335 x 260 mm hole spacing ( parallel to shaft ): 305 mm hole spacing ( transverse to shaft ): 220 mm hole diameter: Ø 12,5 mm speedometer generator: GHTS 42 20 V at 1000 rpm pulley: Ø 205 mm, Groove width: 14 mm, 3 grooves Spare part for lathe PITTLER type: PETRA 1-200/2-2 ! used, tested ! Dimensions: 1040 x 400 x 300 mm

DC motor, shunt motor, with forced cooling AEG TYPE G 22.10 ( G22.10 ) 150 kW 1500 rpm 400 V DC 408 A excitation: 200 V DC 12 A IP23S / IP21S shaft diameter: Ø 90 mm wavelength: 140 mm motor base: 950 x 445 mm hole spacing ( parallel to shaft ): 870 mm hole spacing ( transverse to shaft ): 360 mm hole diameter: Ø 18,5 mm speedometer generator: RADIO-POWER REo 444 B Open circuit voltage: 0.06 V per rpm forced cooling: Motor: VEM KMER 90 L 2 2,2 kW 2820 rpm 220 / 380 V 3AC 50 Hz pulley: Diameter: Ø 348 mm, groove width: 22.5 mm, 6 grooves used, tested ! Dimensions: 1550 x 800 x 930 mm

General SKU075W365 LocationBarneveld MakeStord Bartz Industries TypeRotadisc TST-0,3 V No.20767 Year of construction1976 Pressure Working pressure0.013 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume25 Ltr. Motor5.5 KW Specified Features - Paddle dryer Torus-disc dryer(1x) Continuouscheck Capacity± 25 Ltr. (bruto) With jacket(Stator 19,5 Ltr) External heating spiralcheck Shaft can be heated(Rotor 10,5 Ltr) Max. temperature185 Degr. C. Motor5,5 KW,380-420/660-725 Volt (brand new motor) Speed mixing shaft± 90 Rpm MaterialStainless steel 1.4571 (316Ti) Information Mounted on framecheck Floorspace2,6x1,2 M Extra Specifications- With Comber dust filter - 25 discs dia. 300mm, Rotor lenght ± 1500mm -- RECONDITIONED -- - Heating surface rotor 3,1 M2 Technical specs Extra informationvacuum (5-10 torr)heatable shaft working pressure: Rotor +  ...

General SKU021C037 LocationBarneveld MakeList AG Pratteln TypeDTB-1000 Conti Discotherm No.2524.01.01.01.2524 Year of construction1991 Pressure Working pressure0.5 Bar Vacuum possiblecheck Working pressure jacket7 Bar Main Features MaterialStainless steel Volume1180 Ltr. Motor37 KW Specified Features - Paddle dryer Paddle dryercheck Continuouscheck Capacity1180 Ltr. Trough sizesdia. 750x3780mm Outletvia discharge screw DN80 With jacket(75 Ltr) + 8 Ltr Stirnseiten Shaft can be heatedcheck278 Ltr Max. temperature200°C. Motor37,0 KW, 400/690 Volt (Ex) Speed mixing shaft± 19 Rpm MaterialStainless steel 1.4571 (316Ti) Information Floorspace7,0x1,5 M Total height3,7 M Weight± 9000 KG ATEX compatiblecheck Extra SpecificationsHeating surface: - Trough 8,9 m2 - Mixing shaft 10,9 m2 - Stirnseiten 0,7 m2 Technical specs Extra information10 bar pressure proofMin ...

Cosmec SM 400 multi-saw - after the technical review - very good condition - Italian production - year of production 1993 cutting width 400 mm cutting height 160 mm engine power 37 kW smoothly adjustable feed speed spindle diameter 55 mm sleeve diameter 70 mm four rows of anti-recoil pawls the three upper pressure rollers table width 710 mm minimum element length 700 mm shaft height adjustment guide ruler laser central lubrication spigot diameter 200 mm dimensions of the machine (length / width / height) 220/190/180 cm weight 1800 kg Multirip saws are machines used in the wood industry mainly for cutting piles, but not only. Machines of this type can cut boards into smaller elements and cut lamellas. The principle of their operation is very simple, the machine has a spindle located in a central point on the horizontal axis, on which tools in the form of discs  ...

Double shaft multisaw A. COSTA PUMA 2/60 350/160 - Italian production - year of production 1991 cutting width 350 mm cutting height 160 mm 45 and 45 kW engines 3 kW feed motor 1.1 kW height adjustment motor disc diameter max. 300 mm spindle diameter 2 x 60 mm sleeve diameter 2 x 80 mm track width 350 mm total power of 94 kW feed adjustment on the inverter automatic central lubrication minimum length of the element 600 mm electric height adjustment electric shaft height adjustment four upper pressure rollers pneumatic clamps five anti-ejection pawls shaft position indicator stub diameter 2 x 220 mm spindle speed 4500 RPM dimensions of the machine (length / width / height) 240/235/210 cm weight ~ 6000 kg

track width 440 mm cutting height 55 mm - 200 mm disc diameter 320 mm 2 x 75 kW main engines 3 kW feed motor feed speed adjustable on the inverter up to 60 m / min the top five pinch rollers lower auxiliary roller five rows of pawls electric cutting height adjustment electric shaft height adjustment automatic central lubrication rollers diameter 60 mm, wedge 18 mm sleeve diameter 80 mm wedge 13 mm sleeve length 440 mm spigot diameter 200 mm transport dimensions (length / width / height) 280/245/230 cm weight 5120 kg Multirip saws are machines used in the wood industry mainly for cutting piles, but not only. Machines of this type can cut boards into smaller elements and cut lamellas. The principle of their operation is very simple, the machine has a spindle located in a central point on the horizontal axis, on which tools in the form of discs are installed. Depend ...

Multisaw Edger FOD DPPA-II-50-E with lasers – production in Poland – DTR – fixed sleeve - cutting height 120 mm - cutting width 500 mm - engine power 30 kW - material width max 730 mm - four types of feed speed - power of the feed motor 4 kW - spindle diameter 55 mm - sleeve diameter 90 mm - electric disc spacing adjustment - fixed edging sleeve 60 mm - one movable shield - two rows of anti-recoil pawls - three lower pulling rollers - two upper pulling rollers - two lasers - shaft support Transport dimensions: 250x165x220 cm weight ~ 2000 kg Multisaws are machines used in the wood industry mainly for cutting prisms, but not only. Machines of this type can cut boards into smaller elements and cut lamellas. The principle of their operation is very simple, the machine has a spindle located in the central point, in the horizontal axis, on which tools in t ...

RAIMANN K23 250/120 crawler multi-saw, floating saw – after technical inspection - perfect condition – O&M documentation – movable disc with a fixed sleeve max. cutting height 120 mm max. cutting width 250 mm main engine 30 kW feed motor 1.1 kW feed speed from 5 – 50 m/min max. disc diameter 350 mm sleeve with a diameter of 80 mm shaft with a diameter of 60 mm movable shield min. material length 500 mm dimensions of the work table 800 mm x 1750 mm three rows of anti-ejection pawls feed adjustable on the gear motor central lubrication four pressure rollers from above machine dimensions (length/width/height) 185 / 150 / 220 cm weight 1850 kg Multi-saws are machines used in the wood industry mainly for cutting piles, but also for other purposes. Machines of this type can cut boards into smaller elements and cut lamellas. The principle of their operation i ...

Four-side planer KUPFERMUHLE 600x200mm - after technical review - German production - PLANING HEIGHT ON TWO AND FOUR-SIDES 200 mm - ideal for wet wood - electric height adjustment - electric adjustment of the left head - double feed chain planing width 600 mm planing height on two and four sides 200 mm power of vertical spindle motors 2 x 8.6 kW motor power of the lower shaft 5.5 kW upper shaft motor power 7.5 kW guiding ruler electric height adjustment adjustable vertical heads four upper pulling rollers four lower pulling rollers two take-up pull rollers 4 knives per shaft diameter of shafts 150 mm six types of feed speed 7 / 9 / 11.5 / 14 / 18 / 23 m/min row of anti-recoil pawls spindle diameter 30 mm / 100 mm material pressure at the left head dimensions (length/width/height) 260 x 190 x 205 cm weight 3500 kg

Key data: 410 mm, 2850 mm, 4 St.

Specifications/Equipment: Planing width 410 mm Chip removal max. 8 mm Table length 2,850 mm TERSA knife shaft with 4 blades Knife shaft speed 5000 rpm SUVAmatic planer shaft protection cover electr. Feed table height adjustment Dispensing table with hollow and pointed joint adjustment Stop can be tilted up to 45° Motor power 4 kW Suction nozzle Ø 160 mm Space requirement 2,850 x 1,950 x 1,027 mm Weight approx. 870 kg All information is subject to the actual equipment

Code: 0239 Brand: SCM Model: D/80 Automatic double end tenoner with 10-groups (5+5) for furniture, doors, window frames, panels, prefabricated panels, tables, cladding, prefabricated houses, fibre cement, plexiglass and various Technical data: Working length mm 3200 Min working length on 1 track mm 75 Min working length on 2 tracks mm 150 Working height mm 180 Adjustable feed speed from 5 to 30 mt/min Heavy cast-iron structure Rubber-coated tracks Track lubrication unit Composition: Automatic scoring unit - Motor Hp 1,5 Hogging unit - Motor Hp 8/12 Automatic Spindle moulder unit - Motor Hp 6,5 - Rpm 3000/6000 - Shaft diameter mm 40 Spindle moulder unit - Motor Hp 5,5 - Rpm 3000/6000 - Shaft diameter mm 40 Spindle moulder unit - Motor Hp 7,5/9 - Rpm 3000/6000 - Shaft diameter mm 40 Overall dimensions for transport: Machine mm 4800 x 2400 x 1700 h + Shoulders (tr ...

Geared motor BAUER BS06-62U/D06LA4/MG 0.25 KW 9.2 rpm 220 - 255 / 380 - 440 Volt 3AC 50 Hz 60 Hz - operation is possible ! IP65 Shaft diameter: Ø 25 mm, Shaft length: 45 mm Groove width: 8 mm with adapter for hollow shaft diameter: Ø 20 mm wavelength: 80 mm, groove width: 6 mm gear base: 100 x 100 mm hole spacing: 80 mm all threaded holes: M8 x 1.25, depth 15 mm used, tested ! Dimensions: 340 x 240 x 180 mm

REX U 41K four-sided planer - German production - DTR - numerical control - year of production 1997 - milling heads - for wet wood - total power 51.5 kW TECHNICAL PARAMETERS: - planing width 410 mm - planing height on 2nd and 4th side 260 mm - electronic adjustment of planing height and width with the possibility of programming fixed dimensions 1 lower shaft 7.5 kW 2 upper shaft 11 kW 3 right spindle 7.5 kW 4 left spindle 11 kW milling units 2 x 1.85 kW - feed smoothly adjustable electrically - feed speed range 5-30 m/min - 3 kW feed motor - five pull rollers in the tabletop - two auxiliary rollers in the tabletop - five upper pulling rollers - four pressure rollers on vertical spindles - pneumatic side pressure of the material - adjustable heads - adjustable lower shaft - minimum material length 400 mm Transport dimensions 420 x 230 x 230 cm weight ~ 5  ...

Three-phase electric motor with brake, crane motor BALKANCAR, ZTE V. TIRNOVO KG 1606 - 12/4 ( KG1606 - 12/4, ? 1606 - 12/4 ) 0.24 / 0.76 kW 430 / 1370 rpm 380 V 3AC 50 Hz IP44 shaft diameter: Ø 21 mm, toothed shaft profile, 14 teeth wavelength: 30 mm, toothed shaft profile length: 18 mm flange diameter: Ø 175 mm bolt circle diameter: Ø 185 mm New ! Dimensions: 265 x 250 x 185 mm

Three-phase electric motor with brake, crane motor BALKANCAR, ZTE V. TIRNOVO KG 1606 - 4 ( KG1606 - 4, ?) ? 1606 - 4 ) 0.76 kW 1375 rpm 220 / 380 V 3AC 50 Hz IP44 shaft diameter: Ø 21 mm, toothed shaft profile, 14 teeth wavelength: 30 mm, toothed shaft profile length: 18 mm flange diameter: Ø 175 mm bolt circle diameter: Ø 185 mm New ! Dimensions: 265 x 250 x 185 mm

Description: Planer shaft motor Kw (Hp) 4 (5.5) Planer shaft with 4 knives Ø 110 mm Planer shaft rotation speed 5000 rpm Dust extraction port Ø 120 mm Flush worktable dimensions 2130×515 mm Thicknessing table size 960×515 mm Working height 4 - 225 mm 2 feed speeds 9 - 14 m/min Approx. Onsite Dimension. (l x w x h): 215 x 1,100 x 1,250 mm, weight approx.: 820 kg

Description: Planer shaft motor Kw (Hp) 4 (5.5) Planer shaft with 4 knives Ø 110 mm Planer shaft rotation speed 5000 rpm Dust extraction port Ø 120 mm Flush worktable dimensions 2040×410 mm Thicknessing table size 960×410 mm Working height 4 - 225 mm 2 feed speeds 8 - 14 m/min Approx. Onsite Dimension. (l x w x h): 2,100 x 1,000 x 1,250 mm, weight approx.: 690 kg

Description: Planer shaft motor Kw (Hp) 5.5 (7.5) Planer shaft with 4 knives Ø 120 mm Planer shaft rotation speed 5000 rpm Dust extraction port Ø 160 mm Table dimensions 930×630 mm Working height 5 - 300 mm 4 feed speeds 7-11-15-19 m/min Approx. Onsite Dimension. (l x w x h): 1,100 x 1,050 x 1,260 mm, weight approx.: 770 kg

Jaw coupling PAGUS Ø 140 mm coupling bell: Ø 140 mm, length: 56 mm shaft diameter: Ø 30 mm, shaft length: 56 mm groove width: 8 mm hub diameter: Ø 65 mm, hub length: 13 mm drive disc: Ø 140 mm, length: 83 mm without shaft bore ! hub diameter: Ø 65 mm, hub length. 41 mm New ! Dimensions( total ): Ø 140 x 112 mm

DC tacho generator VEM, ELMO HARTHA type: 1632.2 3000 rpm 100 V shaft diameter 1: Ø 14 mm, wavelength: 30 mm groove width: 5 mm shaft diameter 2: Ø 9 mm, shaft length: 20 mm flange diameter: Ø 110 / 160 mm bolt circle diameter: Ø 130 mm hole diameter: Ø 9 mm control box and collector cover missing ! used, tested ! dimensions 270 x 160 x 180 mm

sheet width: 1250 mm plate thickness: 1 mm pre-bending: - shaft diameter: 56 mm weight of the machine ca.: 170 kg dimensions of the machine ca.: 1,5 x 0,55 x 1 m Manual 3-roller round bending machine with asymmetrical roller arrangement operated with hand crank via wheel transmission, upper roller can be swung out, lower rollers with annular groove, rear shaft adjustable for conical bending, front shaft adjusted via eccentric lever, rear roller adjusted via adjusting lever, rollers crowned. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

:HBM-130XL spindle diameter:130 mm x-travel:2000 mm y-travel:1800 mm z-travel:(ohne Gegenhalter) 2000 mm U-axis:250 mm W-axis (spindle longitudinal):900 mm max. torque on the spindle:3136 Nm B-axis (table):360x1 ° rapid speed:X/Y/Z/W: 2500 mm/min table load:10 t table-size:1800 x 1600 mm T-slots:11 Stk. T-slot - width:28 mm transmission ratio:4 Stk. spindle speed:4-800 1/min spindle taper:50 ISO faceplate:Drehmoment: 4900 Nm faceplate:2.5-125 1/min faceplate:Umdrehung stufenlos einstellbar faceplate:Ø:750 mm weight of the machine ca.:29300 kg main drive:15 kW Machine size (LxWxH):7030x4665x3800 mm 2-Axis DRO :von NEWALL f. X- und Y-Achse Technical Offer of HBM-130 ? Powerful servo spindle motor and four spindle speed rang, stepless in each range. much lower maintenance and 80% failure rate reduced ? High rigidity spindle could insure the strong machining ? Worktable 4x90° position  ...

:HBM-130 | HBM-130L | HBM-130XL spindle diameter:130|130|130 mm x-travel:1600|2000|2000 mm y-travel:1400|1800|1800 mm z-travel:2000 mm U-axis:250 mm W-axis (spindle longitudinal):900 mm max. torque on the spindle:3200 Nm B-axis (table):360x1 ° rapid speed:X/Y/Z/W: 2500 mm/min table load:8|10|10 t table-size:1600 x 1400|1800 x 1600|2200 x 2000 mm T-slots:9/11/12 Stk. T-slot - width:28 mm transmission ratio:4 Stk. spindle speed:4-800 1/min spindle taper:50 ISO faceplate:Drehmoment: 4900 Nm faceplate:2.5-125 1/min faceplate:Umdrehung stufenlos einstellbar faceplate:Ø:750 mm weight of the machine ca.:22,5|24,5|25,5 t main drive:22 kW Machine size (LxWxH):6995/3647/342|7030/4665/3800|7030/4665/3800 mm PLC control:Siemens S7 servo motors:von Siemens/Fanuc/Fagor Technical Offer of HBM-130 ? Powerful servo spindle motor and four spindle speed rang, stepless in each range. much lower mainten ...

Grooving machine for throughfeed process Brand: Vitap Type: Grooving New machine For the processing of acoustic panels Processing unit: - Shaft with 7 presettable saw blades, distance 30mm. - Blade thickness 4mm - Rotation of the shaft , 7000 rpm. - presetting with rapid hook HSK - Max diameter of the blade 125mm Workpieces: - Max. thickness of the panel 50mm - Max weight of the panel: Kg 50 - Max panel size : X no limit, Y 1200 mm, Z 50 mm - Min panel size: X 400 mm, Y 300 mm, Z 12 mm - Panel feeding speed : 25m/min Characteristics: 3 controlled axes: - X Axis - Panel movement with two dinamic clamps - Y Axis - Grooving head movement with pinion and precision rack - Z Axis - Movement with screw at spherical recirculation - Newly patented, high rigidity operating unit movement on Y and Z axis. - Constant side pushing to keep the 0-line - Positioning ...